생활권 수목이란 주민들이 생활하는 지역에 식재된 수목으로, 가로수, 학교수목, 아파트 수목 등 종류가 다양 하며 도시경관과 생활환경 개선의 이점을 제공한다. 그러므로 생활권 수목의 유지와 관리에 있어서도 인근 주민 에 혐오감이나 피해가 없도록 방제를 수행하는 것이 매우 중요하다. 일반적인 경엽살포의 경우, 약액 비산에 의해 주민들의 활동 제한, 안전사고 및 재산상 피해가 발생할 수 있으므로 사용이 제한적이다. 이러한 문제를 해결하기 위해, 나무에 약제를 직접 주입하는 나무주사(trunk injection)가 보편적인 생활권 수목 방제법으로 주목 받고 있으며, 이는 주입물질의 손실이 없고, 외부환경에 크게 영향 받지 않는다는 장점이 있다. 하지만 생활권 수목 전반에 대한 나무주사 처리방법이 명확하지 않아 약효가 일부 가지에서만 나타나는 등 사후 검증 및 관리가 미흡한 실정이다. 본 연구는 생활권 수목 병해충 방제 나무주사 제품의 효과제고를 위한 기존 처리방법 개선 및 최적의 약제처리 방법을 검증하였다. 느티나무외줄면충(Colopha moriokaensis)을 대상으로 시험을 진행하였 으며, Acetamiprid을 시험약제로 사용하였다. 느티나무에 대하여 약제처리 위치, 주입량, 천공수, 주사시기에 따른 약효 및 약해를 확인하였으며, 이를 바탕으로 최적의 약제처리 방법을 제시하였다.

Benthic attached diatoms (BADs), a major primary producer in lotic stream and river ecosystems are micro-sized organisms and require a highly magnified microscopic technique in the observation work. Thus, it is often not easy to ensure accuracy and precision in both qualitative and quantitative analyses. This study proposed a new technique applicable to improve quality control of aquatic ecosystem monitoring and assessment using BADs. In order to meet the purpose of quality control, we developed a permanent mounting slide technique which can be used for both qualitative and quantitative analyses simultaneously. We designed specimens with the combination of grid on both cover and slide glasses and compared their efficiency. As a result of observation and counting of BADs, the slide glass designed with the color-lined grid showed the highest efficiency compared to other test conditions. We expect that the method developed in this study could be effectively used to analyze BADs and contributed to improve the quality control in aquatic ecosystem health monitoring and assessment.

Most of the steam turbine control valves used for the fossil and nuclear power plants operation in South Korea were developed by GE (General Electric) and manufactured by DHIC (Doosan Heavy Industry Company). For may years, DHIC have tried to develop their own technologies related to the power generation. DHIC has launched many R&D projects and ‘Development of a Control Valve Flow Code for Steam Turbine Operation Control of Fossil Power Plant’ was one of the R&D projects. Through our project, we accomplished the experimental method to obtain a steam turbine control valve characteristic curve using the atmospheric air and the reduced model instead using the steam and the real model. Also, we developed the correction method to calculate the real steam mass flow rate from the characteristic curve obtain by the experiment. In this paper, the effectiveness of the correction method was reviewed and it was concluded that the corrected mass flow rate complies well with the real steam mass flow rate.

The role of QR Code robots in smart logistics is great. Cognitive robots, such as logistics robots, were mostly used to adjust routes and search for peripheral sensors, cameras, and recognition signs attached to walls. However, recently, the ease of making QR Codes and the convenience of producing and attaching a lot of information within QR Codes have been raised, and many of these reasons have made QR Codes recognizable as visions and others. In addition, there have been cases in developed countries and Korea that control several of these robots at the same time and operate logistics factories smartly. This representative case is the KIVA robot in Amazon. KIVA robots are only operated inside Amazon, but information about them is not exposed to the outside world, so a variety of similar robots are developed and operated in several places around the world. They are applied in various fields such as education, medical, silver, military, parking, construction, marine, and agriculture, creating a variety of application robots. In this work, we are developing a robot that can recognize its current position, move and control in the directed direction through two-dimensional QR Codes with the same horizontal and vertical sides, and the error is to create a QR Code robot with accuracy to reach within 3mm. This paper focuses a suggestion of control method in QR Code-aware indoor mobility robots.

The railroad facilities are intended for long-term operation as the initial acquisition costs necessary for infrastructure construction are high. Therefore, regular maintenance of railroad facilities is essential, and furthermore, system reliability through systematic performance evaluation is required. In this study, the signal control system of railroad electrical equipment was selected as the subject of research and the performance evaluation target facility selection study was conducted using AHP. The results of the study can contribute to the reliability of the signal control system as well as to the reliability of the railroad system, which is a higher system.

This study is about the control method of smart skin applying SPD(Suspended Particles Display). Smart skin is a self-developed composite window system for the purpose of reducing the cooling load and lighting load. The simulation by TRNSYS18 was modeled in detail based on an actual office located in Jeonju. The previously studied smart skin control method (case1) is a time-dependent control method, and a new control method (case2) was devised based on the data that consideration of daily insolation is important in an actual environment. As a result of simulation by case1, it was found that the amount of cooling energy and lighting energy saved was reduced by 15.1% and 39.2%, respectively, compared to the general model. As a result of the simulation by case2, it was found that the amount of cooling energy and lighting energy saved was reduced to 17.6% and 57.5%, respectively, compared to the general model. Therefore, the newly proposed control method considering the amount of insolation and time was found to be effective in reducing cooling energy and lighting energy.

In this study, a smart skin system that combines SPD (suspended particle display) and LGG (Lighting Guide Glass) and its optimal control method was developed for the purpose of simultaneously reducing the lighting load and cooling load in office buildings. And a demonstration site was built to test the results. The demonstration site was constructed as an experimental group with a smart skin system installed and a control group with a general window system installed. When the cooling energy consumption of the experimental group to which the smart skin system was applied was reduced by about 36.9% compared to the control group, the lighting energy was also reduced by 54.4%.

Due to the development of the industry, the importance of injection molded products is increasing in the fields of electricity, electricity, automobiles, etc. Through this experiment, the weight change of molded products according to the injection speed change during injection molding was investigated. As a result of the experiment, a statistical program was used to confirm that the pi control method produced about 69.2% more weight deviation than the dpi method and to adopt the null hypothesis that the p-value was less than 0.05 Injection speed affected the molded product.

In recent years, studies on various 3D scanner applications, including those on quality control and reverse engineering, have been conducted in the shipbuilding industry. Appropriate scanner selection, scanning environment setting by targets, and data postprocessing are essential for effective 3D scanning projects for small crafts. In this study, a non-contact handheld-type 3D scanner was used for molds and hull products for the 10– 30-ft class of small crafts. Small crafts have fewer geometric features and several glare surfaces; thus, anti-glare and texture feature addition preprocessing is critical. The 3D scanning results are used for geometry quality control of single panels and curved surfaces in craft hulls. Consequently, international rule-based weight estimation calculation sheets have been developed and applied for product weight quality control.

해충의 예찰 없이 작물 정식 초기에 천적을 먼저 적용할 수 있는 천적-서식처 혼합적용(Natural Enemy in First; NEF)기법의 방제효과를 확인하였다. 시설 딸기에서 조사 12주차에 NEF처리구와 천적 단독 처리구에서 친환경자재 처리구 대비 각 83%, 70%의 점박이응애 밀도 억제효과를 확인할 수 있었다. 또한 예찰 없이 작물 정식 초기에 NEF를 적용한 처리구에서 천적 단독 처리구보다 3배 이상의 높은 천적 밀도를 확인하였다.