The purpose of this study is to develop and apply an oil leak detector using a capacitive sensor to detect oil leak in hydraulic equipment. The developed oil leak detector consists of a sensor and a sensing circuit. The sensor is designed using the difference in the permittivity of air and oil to change the capacitance, and the sensing circuit is composed of a charge amplifier and rectifier circuit. The sensing device is made of a PCB module to output the DC analog signal. In this study, this oil detector was installed in a cyclic pressure tester for evaluating valve life and was applied to detect the leakage of the test valve. It can also be applied to detecting the oil leakage of various hydraulic types of equipment and reduce maintenance costs by preventing large leakage of hydraulic oil.

A study of the tissue depletion of florfenicol (FFC) administered orally to pigs at a dose of 0.05 kg/ton feed for 7 days was performed. Sixteen healthy cross swine were administered with FFC. Four treated animals were arbitrarily selected to be sacrificed 1, 3 and 5 days after the end of treatment. FFC residue concentrations in muscle, liver, kidney, and fat were determined using high-performance liquid chromatography (HPLC) with ultraviolet photometric detector at 230 nm. The correlation coefficient (R2) of the calibration curve for florfenicol amine (FFCa) was > 0.997 and the limits of detection and quantification were 0.012 and 0.040 μg/mL, respectively. Recovery rates in swine edible tissues ranged from 79.1 to 93.5%. In the FFC-treated group, FFC residues at 3 days post-treatment were below the maximum residue limits (MRLs) in muscle, kidney and fat, and those at 5 days post-administration were below the MRLs in all edible tissues. These results suggest that the withdrawal period of FFC after the drug treatment might be 5 days, which is a sufficient amount of time for reduction of the FFC residues below the MRLs in all edible tissues.

A numerical method is proposed to calculate the response of detectors measuring particle energies from incident isotropic fluxes of electrons and positive ions. The isotropic flux is generated by injecting particles moving radially inward on a hypothetical, spherical surface encompassing the detectors. A geometric projection of the field-of-view from the detectors onto the spherical surface allows for the identification of initial positions and momenta corresponding to the clear field-of-view of the detectors. The contamination of detector responses by particles penetrating through, or scattering off, the structure is also similarly identified by tracing the initial positions and momenta of the detected particles. The relative contribution from the contaminating particles is calculated using GEANT4 to obtain the geometric factor of the instrument as a function of the energy. This calculation clearly shows that the geometric factor is a strong function of incident particle energies. The current investigation provides a simple and decisive method to analyze the instrument geometric factor, which is a complicated function of contributions from the anticipated field-of-view particles, together with penetrating or scattered particles.

Conventional chemical ecology approach for identification of semiochemicals from natural sources is based on isolation of active ingredients after fraction and bioassay. Instead, we identify potential semiochemicals using reverse chemical ecology approach. In this way, we discovered an odorant receptor (CquiOR136) for DEET, which was not know how and why it work. Additionally, we identified a link between this synthetic repellent and methyl jasmonate, thus suggesting that DEET might work by mimicking defensive methyl jasmoante from plant. Moreover, we serendipitously found that a receptor, CquiOR36, responded to an old sample of nonanal in ethanol. Careful investigation led us to identify the active ligand as acetaldehyde (derived from ethanol) from “contaminants” in the old nonanal sample. We explored that acetaldehyde in a wide range of dose both attracts gravid mosquito and stimulate them to lay eggs in oviposition trays.

PURPOSES: The density in uninterrupted traffic flow facilities plays an important role in representing the current status of traffic flow. For example, the density is used for the primary measures of effectiveness in the capacity analysis for freeway facilities. Therefore, the estimation of density has been a long and tough task for traffic engineers for a long time. This study was initiated to evaluate the performance of density values that were estimated using VDS data and two traditional methods, including a method using traffic flow theory and another method using occupancy by comparing the density values estimated using vehicular trajectory data generated from a radar detector. METHODS: In this study, a radar detector which can generate very accurate vehicular trajectory within the range of 250 m on the Joongbu expressway near to Dongseoul tollgate, where two VDS were already installed. The first task was to estimate densities using different data and methods. Thus, the density values were estimated using two traditional methods and the VDS data on the Joongbu expressway. The density values were compared with those estimated using the vehicular trajectory data in order to evaluate the quality of density estimation. Then, the relationship between the space mean speed and density were drawn using two sets of densities and speeds based on the VDS data and one set of those using the radar detector data. CONCLUSIONS: As a result, the three sets of density showed minor differences when the density values were under 20 vehicles per km per lane. However, as the density values become greater than 20 vehicles per km per lane, the three methods showed a significant difference among on another. The density using the vehicular trajectory data showed the lowest values in general. Based on the in-depth study, it was found out that the space mean speed plays a critical role in the calculation of density. The speed estimated from the VDS data was higher than that from the radar detector. In order to validate the difference in the speed data, the traffic flow models using the relationships between the space mean speed and the density were carefully examined in this study. Conclusively, the traffic flow models generated using the radar data seems to be more realistic.

Oxathiapiprolin은 병원균의 포자형성과 효모성장을 저해하여 노균병을 방제하는 piperidinyl thiazole isoxazoline 계열 살균제로 2015년 국내 사용등록이 요청된 신규약제이다. 본 연구에서는 oxathiapiprolin의 신규등록과 관련해 안전관리를 위한 공정시험법 마련이 요구되어 농산물 중 잔류분석법을 개발하였다. 농산물 중 oxathiapiprolin은 acetonitrile로 추출한 뒤 분배효율 향상을 위해 1 N sodium hydroxide (NaOH)를 이용해 염기성으로 조절하여 비해리상태로 만든 뒤 dichloromethane으로 액액분배하였으며 분배추출액은 silica SPE 카트리지로 정제한 뒤 HPLC-UVD로 분석하였다. 개발된 분석법의 검출한계(LOD) 및 정량한계(LOQ)는 각각 0.003, 0.01 mg/kg이었고, 대표농산물 5종(고추, 감귤, 감자, 대두, 현미) 중 oxathiapiprolin의 평균 회수율은 86.7-112.7%(상대표준편차, RSD ≤ 10%)으로 나타났다. 이는 잔류물 분석에 관한 CODEX 가이드라인 (CAC/GL 40)을 만족하는 것으로 확인되었다. 따라서 개발된 분석법은 국내외 유통 농산물 중 oxathiapiprolin의 안전평가를 위한 잔류량 적부 판정에 있어 공정시험법으로 사용되기에 적합할 것으로 판단된다.

In this paper which was performed to bring public attention to the need for developing an photoelectric smoke detector that detects smokes emitted from diverse fire sources, it was confirmed that the photoelectric smoke detector may not respond to certain smoke types depending on the size and color of smoke particles. The test was performed on a photoelectric smoke detector which is being used generally for specific fire targets specified in UL268, including paper fire, wood fire and flammable liquid fire, while the actual response performance of the fire detector, as well as respective smoke particles collected from different fire source which were photographed with a SEM(Scanning electron microscope) were analyzed in the test for this study.

HPGe 검출기를 이용하여 밀도가 다양한 환경시료에 대한 정밀 분석시 정확한 분석을 위해서는 밀도보정인자가 필요하다. 밀도에 대한 보정인자를 구하기 위해서 본 연구에서는 몬테카를로 코드인 MCNPX 코드를 사용하여 크리스털의 높이, 지름 및 코어의 크기와 같은 특성이 다른 세 대의 p-type HPGe 검출기를 모사하고 밀도 1 g/cm3의 교정용 표준시료를 이용하여 모 델링을 검증하였다. 검증을 통하여 모델링을 확정한 후 0.3, 0.6, 0.9, 1.0, 1.2, 1.5 g/cm3 밀도를 가진 샘플에 대한 효율을 시 뮬레이션하고 밀도보정인자를 도출하였다. 도출된 각 검출기에 대한 밀도보정인자를 비교하였을 때 전 에너지 범위에서 그 차이가 거의 없음을 확인하였으며 이는 검출기의 크리스털과 같은 주요 특성에 대해 밀도보정인자가 독립적임을 의미한다.