For Korean nuclear fuel cycle project, it is necessary to design and evaluate the integrity of spent fuel storage. For the design and evaluation of spent fuel storage, it is necessary to evaluate the properties of various materials used in spent fuel storage. The materials previously considered in the design of nuclear power plants were limited to static properties and were listed in design and manufacturing code and standards. However, for the evaluation of the storage containers in scenarios such as transportation and events, dynamic material property evaluations are required. Research on the dynamic properties of materials is generally conducted in the fields of automotive and aerospace, and most of the studies are on metal materials under sheet conditions. Since the structural materials of the storage containers for used nuclear fuel are mostly composed of thick materials, consideration should be given to property evaluation methodology and quantitative comparison. In this study, the mechanical properties of stainless steel material with canister application were evaluated according to the strain rate, and the crack resistance evaluation was also performed. It was confirmed the changes in strength and crack resistance according to the increase in strain rate and observed differences in microstructural hardening behavior.

Concrete structures of spent nuclear fuel interim storage facility should maintain their shielding ability and structural integrity during normal, off-normal and accident conditions. The concrete structures may deteriorate if the interim storage facility operates for more than several decades. Even if deterioration occurs, the concrete structures must maintain its unique functions (shielding and structural integrity). Therefore, it is necessary to establish an analysis methodology that can evaluate whether the deteriorated concrete structure maintains its integrity under not only normal or off-normal condition but also accident condition. In accident conditions such as tip over and aircraft collision, both static material properties and dynamic properties of the concrete are required to evaluate the structural integrity of the concrete structures. Unlike the calculated damage results for the static deformation of the concrete structure, it is very difficult to accurately estimate the damage values of the degraded concrete structures where an aircraft collides at a high strain rate. Therefore, the present authors have a plan to establish a database of the dynamic material properties of deteriorated concrete and implement to a Finite Element Analysis model. Prior to that, dynamic increase factors described in a few technical specifications were investigated. The dynamic increase factor represents the ratio of the dynamic to static strength and is normally reported as function of strain rate. In ACI-349, only the strain rate is used as a variable in the empirical formula obtained from the test results of specified concrete strengths of 28 to 42 MPa. The maximum value of dynamic increase factor is limited to 1.25 in the axial direction and 1.10 in the shear direction. On the other hand, in the case of the CEB model, static strength is included as variables in addition to the strain rate, and a constitutive equation in which the slope changes from the strain rate of 30 /s is proposed. As plotting the two dynamic increase factor models, in the case of ACI, it is drawn as a single line, but in the case of CEB, it is plotted as multiple lines depending on the static strength. The test methods and specimen sizes of the previously performed tests, which measured the concrete dynamic properties, were also investigated. When the strain rate is less than 10 /s, hydraulic or drop hammer machines were generally used and the length of the specimens was more than twice the diameter in most cases. However, in the case of Split Hopkinson Pressure Bar tests, the small size specimens are preferred to minimize the inertia effect, so the specimens were small and the length was less than twice the diameter. We will construct the dynamic properties DB with our planned deteriorate concrete specimen test, and also include the dynamic property data already built in the previous studies.

본 연구에서는 구조물의 진동제어를 위하여 사용되는 가장 대표적인 수동형 제진장치로 알려진 동조질량 감쇠기(Tuned Mass Damper, TMD)의 동적특성을 운영 중에 추정하는 기법에 대해서 다룬다. 동적특성 추정법은 무향칼만필터에 기반하고 있으며, 구조물과 TMD의 계측 가속도를 이용한다. TMD 파라미터 중에 마찰계수를 추정 파라미터로 포함하는 경우와 그렇지 않은 경우로 구분하여 마찰계수가 TMD의 동적특성에 미치는 영향을 평가하였다. 추정된 TMD 파라미터와 TMD에 의해서 분화된 두 개의 인접모드의 동적 특성을 이용하여 제어 대상 모드의 동적특성을 추정하여 제진장치에 의한 제어성능을 평가하였다. 본 연구에서 제안된 TMD 파라미터 추정법을 실 구조물 계측응답에 적용한 결과 안정적인 파라미터 추정이 이루어지는 것을 확인할 수 있었으며 제어성능 평가가 가능함을 검증하였다.

Transplantation of stem cells, such as mesenchymal stem cells (MSCs), is a promising strategy for treating several types of intractable disorders. Mechanistically, it could not only replace damaged cells by direct contribution, but also establish an anti-inflammatory or immunomodulatory microenvironment. However, the cellular mechanisms underlying molecular and biological properties of stem cells during ex vivo expansion and also after transplantation in pathological environments remain largely elusive. We recently developed the cyanoacrylamide-based coumarin derivatives (Fluorescent real-time thiol tracer; FreSHtracer*) reversibly react with glutathione for monitoring of glutathione levels in living stem cells. These probes revealed that glutathione levels are heterogeneous among subcellular organelles and among individual cells and show dynamic changes and heterogeneity in repopulating stem cells depending on oxidative-stress or culture conditions. Importantly, a subpopulation of stem cells with high-glutathione levels exhibited increased self-renewal and migration activities in vitro and showed improved therapeutic efficiency in treating asthma. Furthermore, employing a novel combination of longitudinal intravital confocal fluorescence imaging and microcystoscopy in living animals, we investigated the distributions and properties of transplanted multipotent MSCs derived from human embryonic stem cells at single-cell resolution in real-time by performing confocal imaging of bladder tissues in a rat model of IC/BPS for up to 6 months post-transplantation. These novel real-time monitoring strategies demonstrate the novel molecular insight for maintaining stem cell functions and also enhance understanding of the in vivo behaviors of the engrafted stem cells, which is crucial to determine the efficacy and safety of stem cell-based therapies. This strategy may facilitate the translation of various stem cell-based approaches into clinical practice.

Liquid storage tank is one of the major infrastructures and generally used to store gases, drinking and utilizing water, dangerous fluids, fire water and so on. According to the recent reports and experiences, the tank structures are damaged in many earthquakes due to their low energy dissipating capacity. Therefore, many researchers have been tried to know the dynamic properties of the tanks including liquids. However, vary limited experimental studies are carried out using relatively small tank models. In this study, a series of shaking table tests are performed with maximum 2 m cubic rectangular liquid storage tanks made of steel to measure the natural frequency and estimate damping coefficient of impulsive and convective mode of the tanks. Especially, the damping values under different shapes and excitation methods are estimated by logarithmic decrement method and half power band-pass method and compared with current design code and standards such as ASCE 7, Eurocode 8 and NZS. Test results show that the impulsive mode damping is around 2% which is proposed by general standards and codes but the impulsive mode damping is 0.13% average that is slightly lower than the code recommendation.

In the present study, the tensile properties and dynamic strain aging of an Fe-24.5Mn-4Cr-0.45C alloy were investigated in terms of strain rate. During tensile testing at room temperature, all the stress-strain curves exhibited serrated plastic flows related to dynamic strain aging, regardless of the strain rate. Serration appeared right after yield stress at lower strain rates, while it was hardly observed at high strain rates. On the other hand, strain-rate sensitivity, indicating a general relationship between flow stress and strain rate at constant strain and temperature, changed from positive to negative as the strain increased. The negative strain-rate sensitivity can be explained by the Portevin Le Chatelier effect, which is associated with dynamic strain aging and is dependent on the strain rate because it is very likely that the dynamic strain aging phenomenon in high-manganese steels is involved in the interaction between moving dislocations and point-defect complexes.

The effects of mixing speed (3, 6 and 10 speed) and time (2, 5 and 10 min) on the dynamic viscoelasticity of dough and the baking properties of gluten-free rice bread were investigated. The specific gravity of the dough was not affected by the mixing speed and time before and after fermentation. The elasticity (G') and viscosity (G") of the dough increased and the tan δ (G"/G') decreased with higher mixing speeds and longer mixing times. The specific volume of the gluten-free rice bread was affected by the mixing time in response surface methodology (RSM). The hardness of the gluten-free rice bread showed a decreasing trend as the specific volume for the gluten-free rice bread increased. The appearance of the gluten-free rice bread was symmetrical at high mixing speeds and long mixing times. Overall results indicated that the quality of gluten-free rice bread could be improved by controlling the mixing speeds and mixing times for the dough.

천해역에서의 해상풍력터빈의 기초 형식으로 모노파일, 트라이포드, 재킷 등의 고정식 기초 사이의 최적의 지지구조물 선별에 대한 논의가 세계적으로 활발하게 되어왔다. 다양한 기초 형식 가운데 어떤 기초를 최종 선택하기 위해서는 경제성과 함께 동적설계 측면에서의 검토도 필요하다. 이 연구에서는 고정식 기초를 해상풍력터빈의 기초로 적용하는 경우 전체 구조물의 고유주파수에 미치는 하중 및 지반 물성치의 불확실성의 영향을 정량적으로 검토하였다. 연구결과, 모노파일의 고유주파수의 변동이 가장 심한 것을 알 수 있었고, 따라서 모노파일 기초를 설계에 반영하는 경우에는 지반 물성치의 불확실성을 최소화시키는 것이 중요하다는 것을 알 수 있었다.

본 연구에서는 저층 조적채움벽 철근콘크리트 골조 구조물의 내진보강 전과 후에 대하여 강제 진동 실험과 상시 진동 계측을 수행하였으며 시스템 식별과정을 통하여 구조물의 동특성을 구하고 해당 구조물과 유사한 동특성을 보이는 해석 모델을 만들었다. 시스템 식별 결과 댐퍼가 설치된 x방향의 감쇠비가 증가되었으며, 해석 모델과 비교한 결과 추가 설치된 부재들(전단벽과 댐퍼)의 유효 강성은 부재의 총단면 강성의 50%만이 발현되어 해당 부재들이 기존의 구조물이나 부재와 완전히 일체화되지는 않음을 알 수 있었다. 또한, 추가 설치된 기초의 y방향 구속조건을 핀으로 하여야 동특성을 일치시킬 수 있었는데, 이는 새로운 기초가 설치되며 해당 지질의 특성이 변화되었기 때문으로 보인다.

In this study, nanocrystalline nickel powders were cold compacted by a dynamic compaction method usinga single-stage gas gun system. A bending test was conducted to measure the bonding strengths of the compacted regionsand microstructures of the specimen were analyzed using a scanning electron microscopy. The specimen was separatedinto two parts by a horizontal crack after compaction. Density test shows that the powder compaction occurred only inthe upper part of the specimen. Brittle fracture was occurred during the bending test of the compact sample. Dispersionof shock energy due to spalling highly affected the bonding status of the nanocrystalline nickel powder.

본 연구는 원심 모형 시험을 위한 동적 현장 지반의 모사 기법을 제안하였다. 현장지반 모사를 위해서 현장 지반의 층상구조 및 전단파 속도 주상도에 대한 자료를 바탕으로 모형시료를 조성하고, 구속압 별 공진주 시험을 수행하였다. 그리고 공진주 시험을통하여 지반의 특성계수와 구속압 영향계수를 구하고, 모형 지반의 전단파 속도를 예측하였다. 이를 현장의 전단파 속도 주상도와 비교하여 시료 조건을 결정하였다. 그리고 결정된 시료 조건을 바탕으로 원심모형시험 모델을 제작하고, 인-플라이트 상태에서 벤더 엘리먼트시험을 수행하여 제안된 기법의 타당성을 검증하였다. 그리고 대형지진시험이 수행된 적이 있는 대만 화련의 현장 지반을 대상으로 축소모델링 기법을 적용하였다.

TLD(Tuned Liquid Damper)나 TLCD(Tuned Liquid Column Damper)와 같이 액체를 질량체로 사용하는 부가 질량형 감쇠기의 경우 동특성추정을 위하여 실제 크기의 진동제어기를 공장에서 제작하여 실험하는 것이 불가능하다. 또한 TMD(Tuned Mass Damper)의 질량체를 콘크리트로 사용하는 콘크리트 TMD의 경우에도 공장실험에서 콘크리트를 타설할 수 없기 때문에 완성된 TMD의 정확한 동적특성을 파악하는 것이 어렵다. 따라서 본 논문에서는 공장 가조립을 통한 실험을 실시하여 동적특성을 추정하기 어려운 경우에 대하여 현장실험을 통한 동특성추정 기법에 관하여 소개하고자 한다. 이를 위해 건물과 진동제어기의 연계된 운동방정식(Coupled equation of motion)으로부터 비연계 운동방정식(Decoupled equation of motion)을 유도한다. 유도된 비연계 운동방정식을 기반으로 건물의 응답과 진동제어기의 응답을 각각 시스템 식별을 위한 입력과 출력으로 하여 일반적인 시스템기법을 이용하여 동특성을 추정할 수 있도록 한다.

The surface treatment effects of reinforcement filler were investigated based on the dynamic mechanical properties of mutiwalled carbon nanotubes (MWCNTs)/epoxy composites. The as-received MWCNTs(R-MWCNTs) were chemically modified by direct oxyfluorination method to improve the dispersibility and adhesiveness with epoxy resins in composite system. In order to investigate the induced functional groups on MWCNTs during oxyfluorination, X-ray photoelectron spectroscopy was used. The thermo-mechanical property of MWCNTs/epoxy composite was also measured based on effects of oxyfluorination treatment of MWCNTs. The storage modulus of MWCNTs/epoxy composite was enhanced about 1.27 times through oxyfluorination of MWCNTs fillers at 25℃. The storage modulus of oxyfluorinated MWCNTs (OF73-MWCNTs) reinforced epoxy composite was much higher than that of R-MWCNTs/epoxy composite. It revealed that oxygen content led to the efficient carbon-fluorine covalent bonding during oxyfluorination. These functional groups on surface modified MWCNTs induced by oxyfluorination strikingly made an important role for the reinforced epoxy composite.

연성방호책 지주(post)의 설계 지반물성치를 파악하고 이를 이용한 해석방법을 수립하기 위한 방법으로서 공내재하시험(PMT)의 사용가능성을 검토하였다. 공내재하시험 결과를 이용하여 지주의 휨모멘트 및 하중-변위관계를 예측할 수 있는 해석방법의 수립가능성을 검토하였다. 모형지반과 모형지주를 이용한 정재하시험을 실시하여 하중-변위의 발생패턴과 크기를 분석하였으며 이를 공내재하시험 해석방법으로부터 구한 결과값과 비교하여 공내재하시험 해석방법의 타당성을 검토하였다. 또한 모형차(bogie)를 이용하여 모형 지주에 대한 충격시험을 실시하여 지주주변지반의 파괴형태를 파악하였으며 측정된 최대감가속도로부터 정적지지력 대비 동적지지력의 발생크기를 분석하였다. 이와 같은 시험 및 해석결과로부터 공내재하시험이 방호책 지주와 도로지반 사이의 역학적 상호연관성을 분석하기 위한 합리적인 시험방법이 될 수 있음을 확인하였다.

Hopkinson bar dynamic test under strain rates ranging from 2000 to 8000 at room temperature revealed that the flow stress of tungsten heavy alloys depended strongly on the strain, strain rate, and the content of molybdenum. The variation of flow stress was caused by the competition between work hardening and heat softening in the materials at different strain rates. The high temperature strength of the matrix phase was increased by the addition of molybdenum, which enhanced the strength of the tungsten heavy alloys in high strain rate test.

지반의 동적 변형 특성인 전단파 속도(V_s), 압축파 속도(V_p), 그리고 그에 따른 포아송 비(v)는 내진 설계나 내진 성능 평가 외에도 구조물의 거동 평가에 필요한 매우 중요한 지반 정수이다. 지난 수십 년 동안 이러한 지반 정수를 효율적이고 정밀하게 측정하기 위하여, 여러 가지 공내 탄성파 시험 기법들이 개발 및 적용되어 왔다. 본 연구에서는 가장 신뢰성이 높은 현장 탄성파 기법인 크로스홀 탄성파 시험을 지반 동적 물성 획득 기법으로 선정하였다. 지하수위 존재 여부에 관계 없이 토사뿐만 아니라 암반을 대상으로 크로스홀 시험을 성공적으로 수행할 수 있도록, 연직 시추공 안에서 지반을 대상으로 횡방향 가진이 가능한 스프링식 발진 장치를 개발하고, 두 곳의 기존 항만 부두 부지와 신규 LNG 저장 시설 두 부지로 구성된 국내 세 지역을 대상으로 크로스홀 탄성파 시험을 실시하였다. 대상 부지에서의 개발 발진 장치 적용을 통한 크로스홀 시험으로부터 지표 부근 토사부터 하부 공학적 기반암 및 지진학적 기반암으로 구성된 암반까지의 깊이별 V_s,\;V_p 및 v와 같은 지반 동적 특성을 매우 효율적으로 결정하였으며, 적용 대상 시설물인 기존 항만 부두 시설물의 내진 성능 평가 그리고 신규 LNG 저장 시설물의 내진 설계를 위한 근본 자료로 제시하였다.

일반적으로 콘크리트댐은 비파괴 검사를 실시한 물성값을 이용하여 정적 및 동적 안전성 평가를 실시한다. 그러나 이런 값을 이용하여 수치해석을 할 경우 경험적인 물성값을 적용하기 때문에 안전성 평가에 대한 결과는 현실적 요소를 반영하기 어렵다. 또한 댐은 품질관리가 중요한 요소 중 하나이지만, 과거 건설된 몇몇 댐에 대해서 축조시기, 타설시기가 달라 재료적 특성에 따른 안전성 문제가 대두되어 관심이 되었다. 따라서, 본 연구에서는 오랜기간 동안 건설중단 된 후 완공된 콘크리트댐의 내부상태를 조사하고(BIPS), 시추코아에 대한 물리특성 실험을 실시하여 물성값 차이로 인해 발생되는 동적특성 결과를 비교분석하였다.

The effects of fiber surface-treatment and sizing on the dynamic mechanical properties of unidirectional and 2-directional carbon fiber/nylon 6 composites by means of dynamic mechanical analysis have been investigated in the present study. The interlaminar shear strengths of 2-directional carbon/nylon 6 composites sized with various thermosetting and thermoplastic resins are also measured using a short-beam shear test method. The result suggests that different surface-treatment levels onto carbon fibers may influence the storage modulus and tan δ behavior of carbon/nylon 6 composites, reflecting somewhat change of the stiffness and the interfacial adhesion of the composites. Dynamic mechanical analysis and short-beam shear test results indicate that appropriate use of a sizing material upon carbon fiber composite processing may contribute to enhancing the interfacial and/or interlaminar properties of woven carbon fabric/nylon 6 composites, depending on their resin characteristics and processing temperature.