오늘날 정보통신기술의 발달로 정보매체가 다양해지고 정보 가 유통되는 속도 또한 빨라지고 있지만, 노인 등의 정보취약 계층에게는 정보를 습득하는 것이 더욱 어려워지고 있다. 이러 한 노년층의 정보격차는 또 다른 형태의 삶의 격차를 야기하고 있다. 이에 본 연구는 노인의 정보화기기 활용 수준을 파악하고 초 급, 중급, 고급 등 노인의 정보화기기 활용 수준이 삶의 만족도 에 미치는 영향을 분석하였다. 구체적인 연구의 방향과 목적은 다음과 같다. 첫째, 노인의 정보화기기 활용수준별(초급, 중급, 고급) 삶의 만족도 간의 관계 및 자아통합감의 매개효과 등 정보화기기 활 용수준이 노인의 삶의 만족도에 미치는 영향을 알아보고자 하 였다. 둘째, 도시와 농촌 등 거주지역별 노인의 정보화기기 활용 수준에 따른 자아통합감, 노인의 삶의 만족도의 차이를 알아보 고자 한다. 이러한 목적을 달성하기 위해 서울 및 도시지역 그리고 경기 도 포천의 읍면지역에 거주하는 60세 이상의 노인 320명을 대 상으로 설문조사를 실시하였고 성실한 설문 응답지 250부를 선 택하여 정보화기기 활용 수준별 자아통합감과 삶의 만족도에 미치는 영향을 분석한 결과, 다음과 같은 결과를 확인하였다. 첫째, 정보화기기 활용수준이 자아통합감에 미치는 영향을 알아보기 위해 구조모형의 평가를 실시한 바, 정보화기기 활용 수준 초급, 중급, 고급 모두 자아통합감을 향상시키는 것으로 나타났다. 둘째, 정보화기기 활용수준 초급에서는 노인의 삶의 만족도 에 의미있는 영향이 없었지만 중급, 상급에서는 노인의 삶의 만족도를 더욱 향상시키는 것으로 나타났다. 셋째, 자아통합감이 높으면 노인의 삶의 만족도 역시 높아지 는 것으로 나타났다. 넷째, 정보화기기 활용수준이 초급수준일수록 자아통합감이 높아지는 정도는 농촌지역에 거주하는 노인들이 도시지역에 거 주하는 노인보다 상대적으로 더 높게 나타났다. 다섯째, 정보화기기 활용수준이 고급 수준일수록 자아통합감 이 높아지는 정도는 도시지역에 거주하는 노인들이 농촌지역에 거주하는 노인보다 상대적으로 더 높게 나타났다. 이러한 연구결과를 토대로 첫째, 지속가능한 노인의 정보화 교육을 위해서 노인이 쉽게 이해하고 다가갈 수 있는 정보제공 및 정보화기기 활용교육 활 성화 방안이 필요함을 알게 되었다. 둘째, 노인 집단의 다양성을 반영한 다각적인 측면에서의 자 아통합감, 삶의 만족도를 증대시킬 수 있도록 정보화기기 활용 수준에 따른 맞춤형 교육이 필요함을 알게 되었다. 셋째 노인 세대의 정보 활용에 대한 적극적인 관심이 필요하 고 그동안 노인층들이 정보격차가 큰 것은 최근에 나타난 정보 화기기를 노인들이 배우거나 활용할 기회가 없었던 것이지 노 인들은 원래 정보화기기를 사용할 수 없는 사람들이 아니었음 을 인식해야 함을 알게 되었다. 마지막으로 노년층 정보화 교육은 농촌, 도시의 환경과 특성 을 고려한 다양한 지역자원과의 협력과 다양한 인력 활용 운영 방안이 필요함을 알게 되었다.

Market integration and prices in pulse crops like black gram play an important role in determining the production decisions of the farmers and diversification towards high value nutritious crops. In this context, the present study explores extent of market integration and price transmission in selected major black gram markets in Andhra Pradesh using Johansen co-integration, Vector Error Correction Model and Granger causality test. The study used monthly prices data of black gram (Rs/quintal) sourced from selected markets of Srikakulam, Krishna and Kurnool spanning January, 1990 to December, 2019. The results of the study strongly buttressed the existence of co-integration and interdependence of selected black gram markets in Andhra Pradesh. However, the speed of adjustment of the prices found to be moderate in Krishna market and quite weaker in Srikakulam market and thereby prices correct a small percentage of the disequilibrium in these markets with the greatest percentage by the external and internal forces. So, it necessitates the need for future research, to investigate the influence of external and internal factors such as market infrastructure, Government policy and self-sufficient production, product characteristics and utilization towards market integration. As there exists only unidirectional causality from Krishna to Kurnool and from Krishna to Srikakulam markets, it calls for strengthening the information technology for flow of market information regularly to help the farmers for increasing their income.

The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.

목적 : 자폐아동의 상동행동 감소를 위한 중재방법으로 조건부 운동방법을 통한 응용행동분석과 감각통합치료의 효과를 비교하고자 한다.연구방법 : 본 연구는 개별실험 연구 설계인 교차중재설계(alternating treatment design)방법을 사용하여 응용행동분석의 조건부 운동방법과 감각통합치료를 상호 교차해서 상동행동을 치료 하였다. 연구대상은 중증 정신지체와 자폐증상을 갖고 정신지체아동 시설에서 생활하는 만 8세 10개월 된 남아였다. 상동행동 감소를 위한 중재방법으로 1회기에 20분씩 감각통합 치료와 조건부 운동 방법을 교차하면서 각 5회씩 실시하였다. 상동행동은 시각적 상동행동과 손가락 상동행동으로 나누어 측정하였다. 종속변인의 측정은 페그를 끼우는 과제수행 과정 중에 발생하는 상동행동을 비디오로 촬영한 후, 등간 기록법(interval recording)으로 기초선 2회, 교차중재과정 10회, 일반화과정 1회 실시하였다.결과 : 치료 전에는 시각적 상동행동이 10분에 평균 21회(4～40회) 발생했으나 중재 후에는 감각통합 치료 후에 평균 1회(0～3회), 조건부 운동 후에는 평균 1.6회(0～10회)로 감소했고, 손가락 상동행동은 치료 전에는 평균 28회(10～36회), 감각통합치료 후에는 평균 3.5회(0～12회), 조건부 운동 후에는 평균 5.7회(0～16회)로 감소하였다. 치료 종료 3주 후에 상동행동을 10분간 페그를 끼우는 상태에서 1회 측정했을 때, 시각적 상동행동이 4～10회, 손가락 상동행동이 4～6회 발생한 것으로 보아 상동행동 치료효과가 적절히 유지된 것으로 보인다.결론 : 상동행동 감소를 위해 사용된 감각통합치료와 조건부 운동 방법을 통한 응용행동분석 모두 효과가 높은 것으로 나타났지만, 이 두 방법의 치료효과 비교에서는 현저한 가시적 차이를 보이지는 않았다.

본 연구에서는 NURBS곡면식을 바탕으로 하는 곡면 모델링과 쉘 유한요소해석의 효율적인 연동체계를 개발하고자 한다. 기하학적으로 정확한 쉘 유한요소해석에서 정확한 기하량의 계산은 필수적이며, 따라서 곡면을 표현하는 일반적인 방법인 NURBS곡면식으로 부터 필요한 기하량을 직접 계산한다면 보간에 의해 발생할 수 있는 기하학적 오차를 줄임으로써 해의 수렴성을 높일 수 있다. 아울러 기하학적으로 정확한 쉘 유한요소를 일반적인 곡면에 적용하기 힘들었던 한계점을 극복하여 수학적으로 표현 가능한 단순한 곡면들뿐만 아니라, NURB곡면식으로 표현 가능한 일반적인 곡면의 해석이 가능하게 되어 적용범위를 확장할 수 있다. 본 연구에서는 곡면을 생성함에 있어 주어진 데이터 점들을 보간하여 NURBS곡면을 생성하는데, 이러한 데이터들은 일반적으로 곡면의 스캐닝을 통해 얻을 수 있다. 곡면을 보간하여 NURBS곡면을 생성하는 과정에서 사용되는 매개변수 정의방식에 때라 생성된 곡면의 정확성이 차이를 보이므로 곡면의 형상에 따라 적합한 방식을 사용하여 곡면을 보간 할 필요가 있다. 몇 가지 잘 알려진 수치예제를 통하여 개발된 연동체계의 성능과 정확성을 검증하고 그 결과를 비교 분석하였다.

In mold structure machining, tool interference is a phenomenon which results from a collision between a blade of tool and a workpiece. Also tool collision is a phenomenon which results from a collision of holder with the object to be machined. These phenomena not only cause damages to mold and tool but also increase machining time and cost. To detect a collision of a tool to mold structure, first of all, the mold structure and a tool must be defined with famous geometric models such CSG, B-rep, and Voxel. A tool is defined as a combination of the blade, the shank, and the holder. This thesis reviews various collision detection algorithms using z-map and computer 3D graphic collision detection algorithms for the tool in machining a mold structure.

Since 1990's, many enterprises have constructed Integration Information System. Especially, they want to become an advanced company use ERP package. Already, ERP system come to high level which is stabilized and support independent business process of many industry sectors. Therefore, important success factors for ERP project are change management and organization activation. Although most companies had previous good plans, but those are not satisfied. Because of failed to change management and discontinued next activity for promotion. This paper studied success factors of project team and plan for organization activation. Also, it proposed next study subject about investigate the role of the member of task force team as a factor that makes the ERP system a success. The results of this study can be used for a successful construction of the ERP system as a solution about Internal problems of Project team.

  This study proposes a new approach which combines Data Envelopment Analysis (DEA) and the Analytic Hierarchy Process (AHP) techniques to effectively evaluate Decision Making Units (DMUs). While DEA evaluates a quantitative data set, employs linear progr

This study proposes a new approach which combines Data Envelopment Analysis (DEA) and the Analytic Hierarchy Process (AHP) techniques to effectively evaluate Decision Making Units (DMUs). While DEA evaluates a quantitative data set, employs linear programming to obtain input and output weights and ranks the performance of DMUs, AHP evaluates the qualitative data retrieved from expert opinions and other managerial information in specifying weights. The objective of this research is to design a decision support process for managers to incorporate positive aspects of DEA's absolute numerical evaluations and AHP's human preference structure values. It is believed that a pragmatic manager will be more receptive to the results that include subjective opinions incorporated into the evaluation of the efficiency of each DMU efficiency when the AHP and DEA are combined simultaneously. The WPDEA method provides better discrimination than the DEA method by reducing the number of efficient units.

Systems are often operated by not integration but blocking, i.e., non-standardization. The system blocking is mainly caused by non-standardization or incompatibility. The integrated system is effective, but researches for quantification of effectiveness from integrating system are few. System blocking causes additional cost which is almost intangible and potential. In this paper we proposed a model to quantify the effectiveness of system integration. To verify the validity of proposed model, we applied the model for Korean information and communication industry and forecasted the cost of integration for South and North Korean telecommunication industry in the way of three scenarios.

One of the recent trends of cockpit development is to integrate (ore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration. module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. After that process, next-generation Automotive cockpit has been embodied as graphical image designing. Henceforth, applying this module to real will be considered after evaluation of utilization. This study is indicated that one example for evaluation of utilization.

RCEP (《역내포괄적경제동반협정》)는 지역 경제 협력 체제를 강화하고 회원국의 법률 규칙의 융합을 추진하며 아세안 개발도상국을 중심으로 하는 무역 규칙 체계를 구축하고 아시아 태평양 지역의 정치 경제 이익 균형을 재구성하며 지역의 새로운 경제 구조의 형성을 가속화하는 데 중요한 추진 역할을 발휘할 것다. 역세계화와 무역보호주의가 고개를 들면서 대국들 게임이 경제 무역 협력에 대한 충격이 끊임없이 상승하고 각국이 무역 규칙과 표준 주도권에 대한 쟁탈이 심해지면서 아시아태평양 경제 일체화는 여러 가지 요소의 방해에 직면하게 되었다. 회원국은 협정의 발효와 실시를 가속화하고 점차적으로 더 많은 발전에 회원국의 참여를 흡수하며 무역 규칙의 업그레이드를 추진하여 아시아태평양 경제 일체화 발전을 추진해야 한다.

This study aims to examine the causality between production input and the price of rice in East Java, Indonesia. This study applied a quantitative method to understand in a comprehensive way the correlation between variables. The data used for this study were collected from several sources, including East Java Agriculture Office, Siskaperbapo.com, and Statistics Indonesia (BPS) of East Java. This research was carried out over five years, starting from 2014 to 2018. Furthermore, the data were analyzed using the Vector Error Correction Model (VECM) by employing E-Views (version 7). The findings of this study indicated that, in the long run, the population, rice production, and changes in people’s income have a positive effect on price stability, but are inversely proportional if seen in the short term. In comparison, in the long run, farmer exchange rates variable has a negative impact on price stability, and inversely proportional in the short term, which has a positive effect. There are different implications when the people’s income increases and the rice price declines; these have great potential to alleviate poverty in East Java, Indonesia. This is due to the fact that the price stability also concerns the welfare of the community.

This research paper examines the causal relationship between India’s economic growth and sectoral contribution to Gross Domestic Product (GDP) and vice versa, in the short-run and long-run, over a 10 years time period. Johansen’s method of cointegration is used to study the cointegration between the sectoral contributions to Indian GDP vis-à-vis India’s economic growth. Further, the route of interconnection between economic growth and sectoral contribution is tested by using Vector Auto Regression (VAR) model. Special attention was given for investigating impulse responses of economic growth depending on the innovations in sectoral contribution using time-series data from 1960 to 2015. This paper highlighted a dynamic co-relationship among industrial sector contribution and agricultural sector contribution and economic development. In the long run, one percent change in industrial sector contribution causes an increase of 3.42 percent in the economic growth and an increase of 1.12 percent in the primary sector contribution, while in the short run industrial and service sector contributions showed significant impact on economic development and agriculture sector. The changing composition of sector contribution is going to be an important activity for the policymakers to monitor and control where the technology and integration of sectors play a significant role in economic development.

The maritime industry has emerged as a new growth engine. The municipalities that own the port are trying to add value through the maritime industry. Overseas port cities are also creating maritime industrial clusters to generate profits and strengthen competitiveness. Therefore, it is very important to understand the comparative status of the domestic maritime industry by region. Based on this analysis, it is possible to establish maritime industrial clusters and strategies for integration. This study analyzed the structure of the maritime industry located in Jeollanamdo province, the southwestern part of Korea. Through the analysis of existing literature, the maritime industry was reclassified into 5 major categories, 21 subcategories, and 84 subcategories. Based on the reclassified maritime industry, the analysis of the Jeollanamdo province maritime industry was based on applying the location quotient and the shift-share analysis. As a result of analyzing the geographical location of Jeollanamdo province, other industries showed the highest value of 2.790, followed by fisheries (2.227), shipbuilding industry (1.164) and marine tourism industry (0.554). The growth effect of the maritime industry in Jeollanamdo province was 35,323 people, and net growth effect excluding national growth effect was 11,945 people. In particular, the net growth effect of the shipbuilding industry was the highest at 11,320, followed by shipping logistics (6,371) and marine tourism (1,529). On the other hand, there was no net growth effect in fisheries. The results of this study can be used as basic data for the construction of the maritime industrial cluster for Jellanamdo province in the future.

모더니즘과 포스트모더니즘 양식의 영향 아래 많은 예술 작품들이 무용 안에서 다양한 예술 매체의 통합을 추구하기 시작했고, 새로운 현대무용 작품들을 만들기 시작했다. 이 연구는 많은 무용가들의 작품을 분석하여 현대무용의 멀티미디어 통합에 대한 연구에 초점을 맞추었다. 보다 구체적으로는 베이징무용쌍주(北京舞蹈双周)의 현대무용 작품들에 대한 조사를 통해 현대무용에서 미디어의 적용과 특성을 알아내는 것을 목표로 하였다. 연구결과 현대무용이 ‘반무용’ 경향의 개념을 일반화하여 미디어의 다원적 표현을 추구한다는 것을 발견하였다.

The β-carotene biofortified transgenic soybean was developed recently through Agrobacterium -mediated transformation using the recombinant PAC (Phytoene synthase-2A-Carotene desaturase) gene in Korean soybean (Glycine max L. cv. Kwangan). GM crops prior to use as food or release into the environment required risk assessments to environment and human health in Korea. Generally, transgenic plants containing a copy of T-DNA were used for stable expression of desirable trait gene in risk assessments. Also, information about integration site of T-DNA can be used to test the hypothesis that the inserted DNA does not trigger production of unintended transgenic proteins, or disrupt plant genes, which may cause the transgenic crop to be harmful. As these reasons, we selected four transgenic soybean lines expressing carotenoid biosynthesis genes with a copy of T-DNA by using Southern blot analysis, and analyzed the integration sites of their T-DNA by using flanking sequence analysis. The results showed that, T-DNA of three transgenic soybean lines (7-1-1-1, 9-1-2, 10-10-1) was inserted within intergenic region of the soybean chromosome, while T-DNA of a transgenic soybean line (10-19-1) located exon region of chromosome 13. This data of integration site and flanking sequences is useful for the biosafety assessment and for the identification of the β-carotene biofortified transgenic soybean.

The β-carotene biofortified transgenic soybean was developed recently through Agrobacterium-mediated transformation using the recombinant PAC (Phytoene synthase-2A-Carotene desaturase) gene in Korean soybean (Glycine max L. cv. Kwangan). GM crops prior to use as food or release into the environment required risk assessments to environment and human health in Korea. Generally, transgenic plants containing a copy of T-DNA were used for stable expression of desirable trait gene in risk assessments. Also, information about integration site of T-DNA can be used to test the hypothesis that the inserted DNA does not trigger production of unintended transgenic proteins, or disrupt plant genes, which may cause the transgenic crop to be harmful. As these reasons, we selected four transgenic soybean lines expressing carotenoid biosynthesis genes with a copy of T-DNA by using Southern blot analysis, and analyzed the integration sites of their T-DNA by using flanking sequence analysis. The results showed that, T-DNA of three transgenic soybean lines (7-1-1-1, 9-1-2, 10-10-1) was inserted within intergenic region of the soybean chromosome, while T-DNA of a transgenic soybean line (10-19-1) located exon region of chromosome 13. This data of integration site and flanking sequences is useful for the biosafety assessment and for the identification of the β-carotene biofortified transgenic soybean.