The hydrogen embrittlement could lead to big damages in bolt/nut, fittings, especially, high pressure valve and high leak-proof valve and so on. Thus, special alloy, for instance, such as Monel and Inconel, is recently used to suppress the problems of hydrogen embrittlement in semiconductor facilities, FCEV(fuel cell electric vehicle) and hydrogen gas stations. The purpose of this study is to investigate the characteristics according to ratio change between drawing and extrusion of Monel material within elastic limit through numerical analysis. As the results, the possibility of plastic deformation in case of drawing was greater than that of extrusion. Consequently, the safety factor related to plastic deformation shows the results depending on the ratio change of force between drawing and extrusion.
Recently, Car weight reduction has become an important development goal to improve fuel efficiency. Car seat frame is a key part of the weight reduction. Existing steel seat frames have the advantages of high rigidity and durability, but have the disadvantage of heavy weight. Recently, Almag material, which are alloy of aluminum and magnesium, is attracting attention because of excellence in strength and weight reduction. At first, the core stiffness members of the seat frame are selected to optimize the weight of the seat frame. And then strength analysis and natural frequency analysis are performed for the existing steel seat frame and Almag seat frame. Based on these analysis results, optimal thickness of the Almag seat frame are determined by an automation program using a genetic algorithm.
In the development of eco-friendly vehicles such as electric vehicles, weight reduction has become a very important design target. Seat weight reduction is very important in vehicle weight reduction. In this study, the energy absorption characteristics of Almag material, an alloy of aluminum and magnesium, and mild steel SAFH440, SAFH590, SAFC780, and SAFH980 were analyzed to obtain a true stress versus true strain curve that was correlated with the test. By performing the seat frame structure analysis using the obtained analysis material property, it was possible to compare the deformation between lightweight material, Almag and mild steel materials. In addition, it was confirmed that the weight reduction effect was 25.8% when applying Almag, an equivalent lightweight material that gives the same maximum deformation as SAFH980, a high-strength mild steel.
PURPOSES : This study analyzes the accident damage scale of hazardous material transportation vehicles not monitored in real time by the Hazardous Material Transportation Safety (HMTS) management center. METHODS : To simulate hazardous-material transportation vehicle accidents, a preliminary analysis of transportation vehicle registration status was conducted. Simulation analyses were conducted for hazardous substance and flammable gas transportation vehicles with a high proportion of small- and medium-sized vehicles. To perform a spill accident damage-scale simulation of hazardous-substance transportation vehicles, the fluid analysis software ANSYS Fluent was used. Additionally, to analyze explosion accidents in combustible gas transportation vehicles, the risk assessment software Phast and Aloha were utilized. RESULT : Simulation analysis of hazardous material transportation vehicles revealed varying damage scales based on vehicle capacity. Simulation analysis of spillage accidents showed that the first arrival time at the side gutter was similar for various vehicle capacities. However, the results of the cumulative pollution analysis based on vehicle capacity exhibited some differences. In addition, the simulation analysis of the explosion overpressure and radiant heat intensity of the combustible gas transportation vehicle showed that the difference in the danger radius owing to the difference in vehicle capacity was insignificant. CONCLUSIONS : The simulation analysis of hazardous-material transportation vehicles indicated that accidents involving small- and medium-sized transportation vehicles could result in substantial damage to humans and ecosystems. For safety management of these small and medium-sized hazardous material transportation vehicles, it is expected that damage can be minimized with the help of rapid accident response through real-time vehicle control operated by the existing HMTS management center.
In recent automobile development, vehicle weight reduction has become a very important goal. Seat weight reduction is a large portion of vehicle weight reduction. In this study, a specimen tensile tests were conducted on the Almag material, which is an alloy of aluminum and magnesium, and also conducted on SAFH440, SAFH 590, SAFC780, and SAFH980, which are mild steel materials used in the seat frame. The tensile specimen tests were carried out in two speed; 2mm/s and 4mm/s, and the obtained stress to strain curve was converted to the analysis material card of true stress to true strain curve to be used in the seat structural analysis. The constructed analysis material card was used in the specimen tensile finite element analysis, and the analysis result was able to obtain the stress to strain curve similar to the test result.
최근 인접국가인 일본에서 규모 7.6의 지진이 발생하였다. 이 지진은 대규모의 최초 지진 이후 120회 이상의 여진을 동반하여 지진의 위험성이 두각되었다. 실제로 구조물들은 최초 지진이후 항복하여 지속되는 여진에 의해서도 붕괴될 위험이 있기 때문에 지진 저항력을 향상시킬 필요가 있다. 본 연구에서는 자동복원이 가능한 신소재를 활용하여 지진에 의한 피해를 감소시키면서도 댐퍼와 구조물에 발생되는 잔류변위를 회복시킬 수 있는 자동복원 신소재 댐퍼를 제안한다. 이 댐퍼는 초탄성 형상기억합금과 폴리우레탄으로 구성되며 폴리우레탄에는 선행압축이 적용되어 그로 인한 반발력을 통해 회복특성을 증진시킨 다. 이에 대한 성능을 평가하기 위해 구조실험과 구조실험에 대한 수치해석을 진행하여 댐퍼의 회복특성, 하중특성을 확인하였 다. 또한, OpenSEES프로그램을 활용하여 구조물에 댐퍼를 적용시키고 실제 지진환경에 대한 수치해석을 수행함으로써 지붕변 위, 밑면 전단력 등의 응답을 구하여 자동복원 신소재 댐퍼의 우수성을 검증하였다. 이를 통해 자동복원 신소재 댐퍼를 구조물 에 적용하게 되면 국내 역대 지진 중 가장 규모가 큰 지진이 다시 발생하여도 구조물을 다시 회복할 수 있을 것으로 기대된다.
Abstract Purpose : This study analyzed physical properties using 1,6-Hexanediol diacrylate (HDDA) as an additive to improve functionality of hydrogel lens such as durability. It was checked whether HDDA can be applied as a crosslinking agent in place of ethylene glycol dimethacrylate (EGDMA). Methods : Polymerization used thermal polymerization and photopolymerization methods, and HDDA was added to each polymerization method at a ratio of 1∼20%. Optical and physical characteristics of the manufactured lens were evaluated by measuring spectral transmittance, refractive index, water content, tensile strength, contact angle, and AFM. Results : Regardless of the polymerization method, the tensile strength ranged from 0.232~0.408 kgf/mm2 in thermal polymerization and from 0.146~0.429 kgf/mm2 depending on the addition ratio of HDDA. In addition, as a result of using HDDA instead of EGDMA, it was confirmed that the physical characteristics of the lens were similar to that of EGDMA, and in the case of tensile strength, HDDA was much improved. Conclusion : HDDA has been shown to be effective in improving the functionality of hydrogel lens and to improve stability and durability. In addition, it is believed that it can be used in various ways as an ophthalmic material as well as a photopolymerization crosslinking agent. Key words : Crosslinking agent, Tensile strength, 1,6-Hexanediol diacrylate, Hydrogel lens
PURPOSES : The wedge-type anchorage system requires a complex analysis of not only the tensile stress of the CFRP plate, but also the compressive stress and shear stress generated by the wedge action. The purpose of this study is to find a composite material failure theory that is suitable for analyzing the behavior of wedge-type anchorage system among various failure theories. METHODS : In this study, numerical analysis of various composite material failure theories was performed to analyze the anchorage strength and failure mode of the wedge-type anchorage system according to each failure theory, and compared with actual test results to determine the composite material failure theory most suitable for analyzing the behavior of a wedge-type anchorage system. RESULTS : Since the Maximum Stress failure theory shows similar results to the actual test in terms of failure mode and anchorage strength, there is no significant problem in applying it to the wedge-type anchorage system. However, it is judged to be difficult to apply under property conditions where interactions between stresses are highlighted. The Tsai-Hill and Tsai-Wu failure theories are considered unsuitable for application to wedge-type anchorage systems because the wedge angle conditions at which the most advantageous anchorage strength occurs are significantly different from other theories and the fracture type cannot be predicted. The Hashin-Rotem failure theory is considered to be the most appropriate to apply as a failure theory for the wedge-shaped anchorage system because the anchorage strength was slightly lower than the actual test results, but there was no significant difference, and the failure mode was consistent with the test results. The Hashin failure theory is judged to be unsuitable for application as a failure theory for the wedge-type anchorage system because the anchorage strength and failure mode were interpreted differently from the actual test results. CONCLUSIONS : The Hashin-Rotem failure theory was presented as the composite material failure theory most suitable for analyzing the behavior of wedge-type anchorage system.
The study used the whole-life carbon assessment method to conduct a thorough carbon-neutral evaluation of a standard steel structure. To further assess carbon emissions, 11 design-changed models were evaluated, with changes made to the span between beams and columns. The results of the carbon emission assessment showed savings of approximately 13.1% by implementing the stage of the beyond life cycle. Additionally, the evaluation of carbon emissions through design changes revealed a difference of up to 42.2%. These findings confirmed that recycling and structural design changes can significantly reduce carbon emissions by up to 48.6%, making it an effective means of achieving carbon neutrality. It is therefore necessary to apply the stage of beyond life cycle and structural change to reduce carbon emissions.
Hexagonal bolt, nut, fittings, and high-pressure valves with special alloy play an important role in many industrial products, for instance, such as semiconductor facilities, hydrogen stations and fuel cell electric vehicles. The purpose of this study is to investigate the structural stability of turning wheel using the reaction force of roller in variable hexagonal rolling die. As the results, the bearing groove had the possibility of damage in turning wheel, especially, in case of Bottom condition. Furthermore, the turning wheel showed structural instability by using safety factor but structural stability using strength, respectively, as a safety criterion.
본 논문에서는 3차원 엮임 재료의 재료 물성치들을 효율적으로 분석하고 추후 최적설계 연구에 활용하기 위해서 파라메트릭 배치 해석 워크플로우를 제시하였다. 3차원 엮임 재료를 구성하는 와이어들 사이의 간격을 설계 매개변수로 하는 파라메트릭 모델에 대해 서 임의의 변수 조합을 가지는 2,500개의 수치 모델을 생성하였으며, 상용 프로그램인 매트랩과 앤시스의 여러 모듈을 사용하여 체적 탄성계수, 열전도도, 유체투과율과 같은 다양한 재료 물성치들을 배치 해석을 통해서 자동으로 얻어질 수 있도록 구성하였다. 이와 같 이 얻어진 대용량의 재료 물성치 데이터베이스를 활용해서 회귀 분석을 수행하였으며, 그 결과 설계 변수들과 재료 물성치 사이의 경 향성과 수치 해석 결과의 정확도를 검증하였다. 또한 확보된 데이터베이스를 통해서 3차원 엮임 재료의 물성치를 예측할 수 있는 인 공 신경망을 구성하고 학습시켰으며, 그 결과 임의의 설계 매개변수 값들을 가지는 엮임 재료 모델에 대해서 구조 및 유체해석 과정 없 이도 높은 정확도로 재료 물성치들을 추정할 수 있음을 확인하였다.
Hexagonal bolt, nut, fittings, and high-pressure valves with special alloy play an important role in many industrial products, for instance, such as semiconductor facilities, hydrogen stations and fuel cell electric vehicles. The purpose of this study is to predict the reaction force of roller in drawing system. Numerical analysis was conducted to obtain data for designing the turning wheel, which is key parts in drawing system, using the reaction force of roller. As the results, the reaction force of X axis direction was about 9~20 times larger than that of Z axis direction and the reaction force of Y axis direction was negligible. The maximum reaction force of roller was the case of 4 stage and the numerical results in this study could be helped for designing the mechanical parts of variable hexagonal rolling die.
A disposal system for spent nuclear fuel divides into two parts; (1) engineered barriers including spent nuclear fuel, canister, buffer and backfill, (2) natural barriers surrounding engineered barriers. Sorption and diffusion are main retardation mechanisms for the migration of released radionuclides. We analyzed the sorption properties of radionuclides for bentonite as a buffer material and collected/ evaluated the distribution coefficients for the purpose of safety assessment for the deep geological disposal of a spent nuclear fuel. Through this, we presented recommended distribution coefficients for radionuclides required for the safety assessment. This work included the radionuclides as follows; alkali and alkaline earth metals (Cs, Sr, Ba), lanthanides (Sm), actinides (Ac, Am, Cm, Np, Pa, Pu, Th U), transition elements (Nb, Ni, Pd, Tc, Zr), and others (C, Cl, I, Rn, Se, Sn). The sorption of radionuclides affected various geochemical conditions such as pH/carbonates, redox potential, ionic strength, radionuclide concentration, kinds and amounts of minerals, and microbes. Among the evaluated radionuclides, Cs, Ni, Pd, and Ra is sensitive to the ionic strength, while Np, Pu, U, Se, and, Tc is sensitive to the redox condition. For the evaluation of distribution coefficients, the data from Sweden (SKB), Finland (Posiva), Switzerland (Nagra), and Japan (JAEA) were collected, analyzed, and the recommended distribution coefficients were suggested.
본 연구에서는 마찰모델에 따라 다른 마찰진자시스템(FPS)이 적용된 교량의 성능을 비교・분석하기 위해 구조해석을 수행하였다. 마찰해석모델 별 성능을 분석하기 위해 PVDF/MgO 마찰재의 마찰계수를 활용하여 쿨롱 마찰모델과 속도 의존 마찰모델을 구축했다. 쿨롱 마찰모델은 마찰속도와 관계없이 단일 마찰계수를 사용하며, 속도 의존 마찰모델은 마찰속도에 따른 마찰계수의 변화를 반영하 는 마찰모델이다. 지진해석으로 비선형 시간 이력 해석과 지진 취약도 해석을 수행하여 구조물의 응답을 확인하였다. 마찰모델에 따 른 바닥판과 교각의 지진 응답을 활용해 면진된 교량의 성능을 분석하였으며, 면진된 교량의 성능을 효과적으로 평가할 수 있는 마찰 모델을 분석했다.