교량 인프라는 국민의 경제와 사회적 활동에 반드시 필요한 물리적 기반시설이고, 국민의 안전과 편의성에 직결되는 시설이므로 국민의 입장에서 편익을 고려해야 한다. 교량의 구성요소 중 바닥판은 교량 전체의 생애주기 동안 필연적으로 교체 시기가 도래하고 파손 등으로 인한 부분 교체도 빈번하게 이루어지고 있다. 바닥판 교체공사 시 거더와 바닥판을 합성하는 기 존 용접 전단연결재의 문제점을 해결하기 위한 볼트 접합 전단연결재(DY볼트)는 바닥판 철거 공정에서 파쇄를 최소화하고 교 체공사를 위한 전단연결재 재시공이 용이하여 공사 기간을 기존 대비 단축할 수 있는 것으로 분석되었다. 공사기간 중 도로차 단으로 인해 발생하는 도로이용자비용을 산출하여 기존 공법과 비교하는 방법으로 볼트 접합 전단연결재를 적용한 강합성 교량 의 경제성을 도로이용자(국민) 입장에서 분석하였다.

In this study, we have prepared a Ti-6Al-4V/V/17-4 PH composite structure via a direct energy deposition process, and analyzed the interfaces using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The joint interfaces comprise two zones, one being a mixed zone in which V and 17-4PH are partially mixed and another being a fusion zone in the 17-4PH region which consists of Fe+FeV. It is observed that the power of the laser used in the deposition process affects the thickness of the mixed zone. When a 210 W laser is used, the thickness of the mixed zone is wider than that obtained using a 150 W laser, and the interface resembles a serrated shape. Moreover, irrespective of the laser power used, the expected  phase is found to be absent in the V/17-4 PH stainless steel joint; however, many VN precipitates are observed.

The bead geometry according to the welding conditions was analyzed through the laser fillet welding experiment of 9% Ni steel, and the relationship between the shear strength and the five bead geometry measured by selecting the main bead geometry of the fillet weld was analyzed. Among the welding conditions, the welding conditions that directly affect the penetration depth are welding speed and laser power, and the working angle and beam position have a great influence on the formation of leg of vertical and horizontal members. The bead shape, which greatly affects the shear strength, is the horizontal member length, neck thickness, and weld length, and has a proportional relationship with the shear strength. As a result of confirming the relationship between shear strength and bead shape through the derivation of the trend line, it was confirmed that the length of the vertical member, whose R2 value was 0.92, was most closely related to the shear strength.

Additive manufacturing (AM) is a highly innovative method for joining dissimilar materials for industrial applications. In the present work, AM of STS630 and Ti-6Al-4V powder alloys on medium entropy alloys (MEAs) NiCrCo and NiCrCoMn is studied. The STS630 and Ti64 powders are deposited on the MEAs. Joint delamination and cracks are observed after the deposition of Ti64 on the MEAs, whereas the deposition of STS630 on the MEAs is successful, without any cracks and joint delamination. The microstructure around the fusion zone interface is characterized by scanning electron microscopy and X-ray diffraction. Intermetallic compounds are formed at the interfacial regions of MEA-Ti64 samples. In addition, Vicker’s hardness value increased dramatically at the joint interface between MEAs and Ti-6Al-4V compared to that between MEAs and STS630. This result is attributed to the brittle nature of the joint, which can lead to a decrease in the joint strength.

최근 친환경에 대한 관심의 증가로 목조주택에 대한 수요가 증가하고 있다. 하지만, 목구조의 물성치에 대한 연구와 설계에 대한 지침 및 시공상세는 매우 부족하고 이에 대한 연구도 미흡하여 실무자들이 구조설계 및 시공을 하는데 많은 어려움을 겪고 있다. 특히, 내진성능이 중요시 되고 있는 현시점에서 내진성능을 확보할 수 있는 접합부의 개발이 요구된다. 따라서, 이 연구에서는 다른등급구성집성재에 대한 휨실험과 압축실험을 수행하여 재료의 물성치에 대한 소재시험을 진행하였다. 제안된 접합부의 구조성능을 검증하기 위하여 접합부에 반복하중을 가력하는 실험을 수행하였다. 또한, 진행한 재료시험의 결과를 사용하여 접합부에 대하여 유한요소해석을 진행하였다. 실험 및 해석결과 개발된 접합부는 충분한 구조성능을 확보할 수 있을 것으로 판단된다.

Two steel-frame joint specimens with welding joint parts were constructed and evaluated. Two types of displacement load, monotonic and cyclic, were used to evaluate the steel-frame joint specimens. According to the experimental results, the maximum moment of the cyclic test results was 80% smaller than that of the monotonic test results. Local buckling was observed in the compression area of the H-beam flange. A finite element analysis model based on the experimental results was proposed to analyze the steel-frame joint specimens. The numerical results predicted the experimental behavior of the steel-frame joint specimens well. Therefore, it is possible to use the proposed finite element analysis model to evaluate middle- and low-rise steel-frame buildings constructed in South Korea.

Abstract: In this study, finite element analysis modeling is proposed to evaluate middle- and low-rise steel-frame buildings constructed in South Korea. Two steel-frame joint specimens with welding joint parts were constructed and evaluated. Two types of displacement load, monotonic and cyclic, were used to evaluate the steel-frame joint specimens. According to the experimental results, the maximum moment of the cyclic test results was 80% smaller than that of the monotonic test results. Local buckling was observed in the compression area of the H-beam flange. A finite element analysis model based on the experimental results was proposed to analyze the steel-frame joint specimens. The numerical results predicted the experimental behavior of the steel-frame joint specimens well. Therefore, it is possible to use the proposed finite element analysis model to evaluate middle- and low-rise steel-frame buildings constructed in South Korea.

To overcome the weakness of spread foundation in large space structure, the research of precast pile for replace spread foundation have been conducted. The new type of joint between PHC pile and steel column is named HAT Joint(Hollow hAlf-sphere cast-sTeel Joint). It connected PHC Pile by bolt that verification of bolt connection should be accomplished. In this paper, pull-out test and flexural performance for HAT Joint to verifying the bolt connection is explained. As a result, the pull-out and flexural capacities of bolt were checked to use in real structure. Furthermore, the equation of pull-out strength was proposed.

This paper presents a foundation pile to steel column connection that can resist large magnitude of moment and that can be easy installed. The developed joint has spherical shape and it is given the name HAT joint to mean Hallow half-sphere steel joint. Four types of HAT joints are developed. Namely, H-type, T-type, P-type and K-type. In this paper I will talk about the performance assessment of T-type(Tube Column) and P-type(Pile Column) of HAT joints with finite element analysis and experiment on a full scale model is presented.

In this paper, Nonlinear Static Pushover analysis method(NSP) is proposed which apply to RC buildings reinforced by external retrofit fornseismic performance. Based on previous analysis and research, NSP is more developed by connection nonlinearity according to shearnresistance mechanism such as dowel and adhesive resistance as major shear resistance elements. According to the proposed method,nstructural analysis for example buildings was carried out to evaluate seismic performance of buildings. And, it was confirmed thatndepending on shear strain and characteristics of joint resistant of external retrofitting are different from internal retrofitting. Furthermore,nthe strength reduction coefficient of the anchor needs to be considered at the joint design.

In Part I, we disccussed of joint between PHC pile and steel column in foundation of large space structures, one prototype of a joint of PHC pile to steel pipe column was suggested on the basis of analytical studies. In this paper, I explain the Joint of PHC pile to steel tube column and more detail of analysis

To overcome disadvantages of usual spread foundation in large space structure, some prototypes of a joint of the PHC pile to steel pipe column that directly connects a column to a PHC pile are analytically studied. With the consideration of strength requirement and stress concentration of joint of the PHC pile to column, we suggest the most appropriate one.

본 연구에서는 강재가 맞대기 이음으로 연결될 경우 CFRP(Carbon Fiber Reinforced Plastic) 쉬트(sheet)를 맞대기 이 음부에 접착할 경우 강재 및 CFRP 쉬트에 발생하는 응력을 해석하였다. CFRP 쉬트로 보강한 경우 접착제의 두께, 강재와의 접착 길이, CFRP 강도 변화를 매개변수로 사용하여 이 매개변수에 변화에 따른 이음부의 응력분포를 분 석하였다. 또한 CFRP를 여러 층으로 접착할 경우 각 층의 강도를 다르게 변화시켜 맞대기 이음부에 유리한 응력분 포를 나타내는 CFRP의 강도를 제시하였다. 본 연구를 위해 빠른 수렴성을 가지며 왜곡된 요소형상에서도 정확한 응력결과를 보이는 강화변형률장(Enhanced Assumed Strain Field)을 사용한 평면변형률 유한요소에 대한 프로그램을 작성하였다.

Cu-P계, 4종의 Cu-P-Pn계 및 3종의 Cu-P-Sn-Ag계 용가재를 사용해 Ar분위기 하에서 1003 및 1033K로 1.2Ks동안 노브레이징한 ST304, STS430 및 저탄소강과 동 접합체들을 전단시험 및 조직시험하였다. 계면에서의 미세조직은 제 종류 즉 첫째,균열을 포함하는 반응층 둘째, 분산층 세째, 균열을 포함하는 반응층과 분산층으로 분류된다. 분산층만이 존재할때 40-60MPa 이상의 상대적으로 높은 전단강도가 얻어지며, 동모재파단을 일으킨다. 이 반응층이 형성되었을때는 반드시 균열이 형성되며, 낮은 전단강도를 나타내고 접합부파단을일으킨다. 이 반응층은 Fe-P계의 화합물이다. 이러한 미소조직 및 강도 경향은 용가재내 Sn의 존재 및 모재내 Ni(또한 Cr)의 존재 유무에 따라 변화한다.

This experimental study showed that the shear friction strength that the joint regions of hybrid steel-reinforced concrete beam systems was increased by the dowel bars.

A finite element analysis modeling is proposed to evaluate welding joint part of steel-frame. Based on the experimental results, A finite element analysis model was proposed to analyze the welding joint of steel-frame specimens. The numerical results predicted the experimental behavior of the welding joint of steel-frame specimens well. Therefore, it is possible to use the proposed finite element analysis model to evaluate middleand low-rise steel-frame buildings constructed in South Korea.

This study compares the steel column-base plate connections to improve the flexural capacity of small building. In addition, performance level was evaluated by example building. Analysis results, an additional reinforcement is required to the proposed steel column-base plate connection. And then, We should compared the impact of beam-column joints.

In order to apply the mechanical deck joint to the prefabricated steel gird composite decks, shear resistance of the joint composed of concrete shear key and high-tension bolt was evaluated by the push-out test experimentally and analytically. In this study, shear resistance of the joint installed in the deck is evaluated by design equation. In comparison with resistances estimated by design equation and test results, the deck joint is structurally safe enough, and in the case of pointed loading efficient width of the prefabricated steel grid composite deck is about 1m long.

In this study fatigue test on the steel grid composite deck is conducted for the evaluation of fatigue performance and serviceability. Deflection and crack width are measured at the end of each cyclic loading step. Test results show that maximum measured deflection and crack width are below the allowable values, and the tested steel grid composite deck exhibit acceptable fatigue performance and serviceability.

This paper presented to study used Abaqus on steel plate bonded reinforcement technology for column to beam connections, and then the result showed that steel plate bonded reinforcement technology has great reinforcement effect for RC column to beam joint. Also the steel plate bonded reinforcement technology was safety and convenient operation.