Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

이 논문의 목적은 슬라보이 지젝의 기독교에 대한 관점과 이해를 바탕으로 기독교의 종교적 핵심과 그에 대한 비판의 내용을 해명하는 것이다. 지젝에 따르면 기독교성의 철학적 핵심은 내재적 초월이 어떻게 가능한가를 보여주는 사유형식이다. 그런데 오늘날의 기독교는 그러한 기독교성의 사유와 신앙을 불가능하게 하는 도착적 신앙과 사유형식으로 타락해 가고 있다. 사라진 대타자의 자리를 자본과 소비로 채우는 현대 사회에서 기독교의 근본적인 신앙심과 종교성을 되살리기 위해서는 예배 의례로 고착화(固着化)되고 형해화(形骸化)된 기존의 기독교를 ‘생성-중인-기독교’로 재구성해야 한다는 것이다. 이는 곧 도착적 주체의 신앙에서 기독교적 주체의 신앙으로의 전환을 의미한다. 기독교적 주체의 신앙은 기존의 사회질서의 이데올로기적 환상들에 사로잡혀 자신을 사회구조의 충실한 받침대로 삼는 도착적 주체의 신앙방식에서 벗어나, 사랑의 성령이라는 실재를 만나서 사랑의 주체로 거듭남으로써 사랑의 삶과 공동체를 만들어 나가는 존재방식을 지향하게 된다.

Currently, the commercialization of the 5th Generation (5G) service is becoming more prevalent in domestic communication network technology. This has reduced communication delay time and enabled large-capacity data transmission and video streaming services in real-time. In order to keep pace with these developments, K-water has introduced a smart process control system in water purification plants to monitor the status of the water purification process. However, since wireless networks are based on the public Long Term Evolution (LTE) network, communication delay time remains high, and high-resolution video services are limited. This is because communication networks still have a closed structure due to expense and security issues. Therefore, with 5G in its current form, it is very difficult to accommodate future services without improving the infrastructure of its communication networks. In recognition of these problems, this study implemented the authentication and management function of wireless networks on a wired network management system in the K-water Bansong water purification plant. The results confirmed that wired Local Area Network (LAN) services give a higher security performance than an expensive commercial wireless LAN system. This was achieved by using an Internet Protocol (IP) address management system of wired networks and the packet filtering function of the Layer2 (L2) switch. This study also confirmed that it is possible to create a wireless LAN service that is 3.7 times faster than the existing LTE communication network.

Electric of using in daily life is always exposed to risk of electrical fire and electric shock. Only degree of risk is different, there is no risk free electrical product. Generally, the higher voltage, the risk of electric shock is high. The much electric current, the risk of electrical fire is high. But, we can’t help using electric because of risk and we effort to reduce the risk of electrical fire and electric shock. This study deal with the fire prevention generated on heating equipment using SSR for current

Recently, in construction vehicles like exacavator, many customers demand the interior parts to be convenient and handy to operate. Futermore, that parts had to be more lightweight and better quality and durability. For this reaseon, the combination switch, a part for operation of head lamps, wipers, horn, etc, had been designed as a new lightweight structure by using PA plastics material and had been changed the mechanical contact into electric non-contact by using Hall IC and FET.

PTEF membranes are used for roofing materials of membrane structures. PTEF is the abbreviation of Poly-tetra Fluotide-ethylene. These materials are consisted of fiberglass weave and polyetrfluoroethylene coating. Also, PTEF membranes have some problems of structural capacity by wind or snow load, etc. In this study, sensor housings using lead switches are bonding in PTFE membranes, Monitoring to changes tension and tear damages are studied using radio frequency. If tension is received on edged membranes, bonded lead switches of sensor housings will be destroyed by changes tension, and these become to send signals of damages at the connected radio frequency system with increased tension. Study of these functional membrane materials will be contributed to prevent water leakage and long-term maintenance of membrane structures.

In designing and operating cellular networks, it is assumed that the area of coverage is geographically divided into hexagonal cells. Among these cells, a certain number of cells are chosen to install switches that serve as relays for communications between any pair of cells. Then, each cell is assigned to a switch to complete the cellular network. This decision regarding assignment of cells to switches is known as a CSA (Cell-to-Switch Assignment) problem. Since this problem is so-called NP hard problem, many researches have proposed heuristic-based algorithms to provide near-optimal solutions with a reasonable computation time. Considering these characteristics of the CSA problem, this work develops a genetic algorithm and a local search algorithm. Throu호out a number of experiments, the performance of the proposed algorithms are evaluated, and compared with existing heuristic method

방사선사는 일반촬영 시에 다양한 환자를 만나게 된다. 노령환자, 유아 등 몸이 불편한 환자를 검사하게 된다. 소규모의 병·의원에는 방사선사가 혼자 업무를 보는 경우가 자주 발생한다. 이러한 경우 방사선사의 두 손은 환자의 자세를 유지하는데 사용되어지기 때문에 촬영에 있어서 어려움을 느끼게 된다. 본 연구는 이러한 문제점을 극복하고자 진단용 방사선 발생 발판 스위치를 고안하여 실험하였다. 제작한 발판 스위치를 진단용 엑스선 촬영장치에 장착하여 조사선량 재현성 시험, kVp, mAs, 백분율평균오차와 같은 정량적 평가를 실시하였다. 결과적으로 발판 스위치 사용에 대한 정량적 평가는 조사선량 재현성 시험에서 변동계수가 0.05이하로 측정되었고 kVp 시험에서는 백분율 평균오차가 ± 10% 이내로 측정되었다. mAs 시험에서도 백분율 평균오차가 ± 20% 이내로 측정되었다. 이는 진단용 방사선 발생장치의 검사기준 범위에 모두 부합하여 사용상 문제점은 제시되지 않았다. 또한 현재 근무 중인 방사선사를 상대로 유용성에 관한 정성적 평가를 실시하였다. 결론적으로 발판스위치의 엑스선 발생효율의 정량적 평가에서는 실험된 검사가 엑스선 발생장치 장비 기준 범위에 부합하였으며 설문을 통한 평가에서도 먼저 병·의원에서 근무하는 방사선사를 상대로 발판 스위치를 사용한 이후 설문을 통해 발판 스위치에 대한 편리성과 활용성에 대해 설문 실시한 결과는 발판스위치 사용은 임상에서 많은 도움을 줄 수 있는 긍정적인 결과로 나타내었다. 그러므로 진단용 엑스선 촬영용 발판 스위치를 사용하면 방사선 기술자 작업의 신속성과 정확성을 효과적으로 향상 시킬 수 있으므로 의료 서비스 만족도를 높이는 데 효과적으로 사용할 수 있을 것이다.

Purpose – In this study, we consider and examine relationships between reasons for business switch or liquidation (BSL), and the demographics of small and medium enterprises (SMEs) in South Korea. The related five variables are occupations, administrative districts, age of employer, firm age and foundation motivation. In addition, eleven levels in association with reasons for BSL visualize the corresponding demographics by measuring their similarity on the dimensional planes assuming that the association exists between variables under consideration. Research design, data, and methodology - This study is done by the Ministry of SMEs and Startups in 2016 and examines 20,307 small and medium enterprises. For examining the distinct relationships among variables under consideration, both chi-squared test and correspondence analysis as main statistical tools are used. Results - The results show that among levels of reasons for BSL the three levels –weakening profitability, poor sales and economic depression- are main ones for the five demographics variables mentioned above, and we can obtain the detailed associations between attributes of corresponding variables by inspecting the two dimensional plane. Conclusions - This study suggests reasons for BSL are closely associated with the five different demographics variables – Administrative districts, Firm age, Occupations, Age of employer and Foundation motivation-by looking over results.

The objective of this study was to analyze the determinant factors in the new agricultural technology acceptance targeted to the automatic switchgear for heat-retaining mulching used on the oriental melons farms. The probit and the logit models were estimated using survey data. The result indicated that the level of income, innovativeness, and reliability are important factors of the new agricultural technology acceptance. Therefore, it is considered the level of income, innovativeness, and reliability in advance to extend the new agricultural technology quickly.

A main distributing frame(MDF) is an interface unit that is used to connect office equipment cables in a telephone company to subscriber cables. Until now, there is no automated switching system for MDFs in Korea. Manual handling of an MDF has some drawbacks; It is time-consuming, very cumbersome, and expensive. It also makes maintenance hard. An automated main distributing frame system is proposed and commercialized in Japan. In that system, a robot gripper inserts connecting pins into the cross point holes of a matrix board, which reveals several disadvantages in the aspects of space, maintenance, fault tolerance, and economical efficiency. This paper describes a newly developed robotic switch board system for MDFs. In the developed system, switches are placed at the cross point of a matrix board. There is one robot in between two switch units, so one robot deals with two switch units. In the system, positioning the robot, opening and closing switches can be done by using only a pair of motors and a pair of solenoids. The newly developed system is compact in size, reduces cost, and shows high reliability.