Korean firms have been vigorously searching and exploring overseas market opportunities through export and overseas investment. As of end of 2019, there were more than 80,000 Korean overseas subsidiaries all over the world. With Korean overseas direct investment increasing recently, it became one of the important issues for overseas investors to be successful in the global market. There are a lot of studies on factors influencing the performance of overseas subsidiaries such as ‘firm’ and ‘country’ factors. This study empirically examines subsidiary performance determinants with ‘industry architectures’ by using a sample of 292 overseas Korean firm subsidiaries. Industry architectures are the stable but evolving sets of rules and roles through which labor is divided within a sector. This article considers how industry architectures shape success in international expansion. Industry architectures differ between countries, are not necessarily technologically determined, shape firms’ capabilities and their competitive environment, and constitute a distinct level of analysis. We extract antecedents of related theory and empirically test its impact with a survey of Korean firms expanding in emerging economies. We would say this is the first study which tries to focus on industry architectures with the performance of Korean overseas subsidiaries. We find that separability and similarity of industry architectures across countries and localization of subsidiaries are robust and important predictors of success in international expansion. Our results suggest that industry architectures should be added to firm and country as an intermediate level of analysis that helps explain success in international expansion. While we established a pattern, much more remains to be done. We focus on the success of foreign operations, but we do not consider the broader benefits of going abroad, such as the learning or network effects that accrue at the level of the entire firm. The next obvious question is whether the results would differ in the developed market context. These we leave for future research to consider.

This study has established a fashion illustration education plan using the contour drawing that fosters observational ability and enables creative drawing. This study developed two illustration curriculum proposals consisting of 15 weeks, combining literature and case studies. The researchers organized a step-by-step teaching plan that utilizes contour drawing according to the three stages of fashion illustration classes: foundation courses, general courses, and intensive courses. When the contour drawing is used at the beginning stage of the foundation courses of fashion illustration, it can be used as a technique to reduce the fear of students about practical skills, induce interest in illustration, and cultivate observation ability about objects. In general process, it is combined with various tools and coloring materials to strengthen expression power, and it is possible to produce detailed expressions and illustrations about human body and clothing. In intensive courses, it is expanded to the production of creative works with new aesthetics through digital techniques and mixed materials. As such, the contour drawing is expanded in various ways according to the learning contents and goals of each step, and is flexibly adjusted according to the learning content. Contour drawing has the effect of acquiring observation and expression ability, and it is analyzed as a technique that enables the production of creative illustration of students.

The objectives of this study are to explore the information source, assessment, and preferred styles of 3D virtual influencers(VI), to investigate the expected impact of advertisements with 3D VIs on brands, and to explore ways of expanding the use of 3D VIs. In-depth interviews with 40 males and females in their 20s and 30s were conducted and qualitative data were analyzed. The study results are summarized as follows. First, the information source of the 3D VI was SNS, acquaintances, and broadcasting. Second, 3D VIs were considered positively due to their attractive appearance, wide utilization, innovative use, freshness, separation from private identity, and time and cost savings, while considered negatively due to their unrealistic appearance and antipathy against replacing a person’s role. Third, the preferred appearance styles of the 3D VI differed according to the level of virtuality although the majority of interviewees preferred similar looks to real people with low virtuality. Fourth, diverse image qualities such as innovative, differentiated, trendy, high-value, professional, and future-oriented were considered as transferred to the brand advertised by 3D VIs. Fifth, advertisements with 3D VIs may help build positive perceptions of advertised brands that may lead to purchase behaviors for some consumers. Lastly, to expand the use of 3D VIs, the specific advantages of virtual models should be maximized with consideration of how to implement a variety of body types and images of models. Findings present an important foundation to generate strategies to better apply 3D VIs to the fashion market.

Among various methods to produce graphene sheets, electrochemical exfoliation has been regarded as an effective method for the mass production of high-quality graphene sheets because of its simplicity and environmental friendliness. However, conventional electrochemical exfoliation has a disadvantage of accumulating intercalating ions at graphite interlayers owing to the use of a constant voltage. In this study, we developed a DC switching technique to achieve more efficient intercalation of ions than that in the conventional method. In the DC switching method, positive and negative voltages are successively applied to release the accumulated intercalating ions. By testing various conditions, we found the optimum switching time to produce high-quality graphene sheets with the highest yield rate and the highest electrical conductivity. As a result, the graphene sheets using this DC switching technique showed 85% higher yield rate, 193% higher electrical conductivity, 160% larger area, and 25% thinner thickness than those obtained when using a constant DC method. We believe that this DC switching technique can be used for large-scale production of high-quality graphene sheets.

We propose a novel stripping solution containing acids (HCl and HNO3), an oxidant [(NH4)2S2O8], and complexing agents (NaCl and citric acid) to remove surface passivation layers from 14K gold alloys fabricated using an investment casting process. The optimized solution employing only HCl acid is determined by varying molar fractions of HCl and HNO3 on 14K yellow gold samples. Stripping properties are also identified for red and white gold alloy samples under the optimized stripping conditions. The removal of passivation layers, weight loss, and microstructure evolution are characterized using Raman spectroscopy, a precision scale, and optical microscopy. The proposed stripping solution effectively removes passivation layers more rapidly than conventional cyanide stripping. Weight loss increases linearly for up to 5 min for all 14K gold alloys. Red gold exhibits the greatest weight loss, followed by yellow gold and white gold. The results of microstructural analysis reveal that the conformal stripping occurs according to time. These results imply that the proposed oxidative chloride stripping might replace conventional cyanide stripping.

In this paper, AgCl/Ag3PO4/diatomite photocatalyst is successfully synthesized by microemulsion method and anion in situ substitution method. X-ray diffraction (XRD), photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and ultraviolet-visible spectroscopy (UV-Vis) are used to study the structural and physicochemical characteristics of the AgCl/Ag3PO4/diatomite composite. Using rhodamine B (RhB) as a simulated pollutant, the photocatalytic activity and stability of the AgCl/Ag3PO4/diatomite composite under visible light are evaluated. In the AgCl/Ag3PO4/diatomite visible light system, RhB is nearly 100 % degraded within 15 minutes. And, after five cycles of operation, the photocatalytic activity of AgCl/Ag3PO4/diatomite remains at 95 % of the original level, much higher than that of pure Ag3PO4 (40 %). In addition, the mechanism of enhanced catalytic performance is discussed. The high photocatalytic performance of AgCl/Ag3PO4/diatomite composites can be attributed to the synergistic effect of Ag3PO4, diatomite and AgCl nanoparticles. Free radical trapping experiments are used to show that holes and oxygen are the main active species. This material can quickly react with dye molecules adsorbed on the surface of diatomite to degrade RhB dye to CO2 and H2O. Even more remarkably, AgCl/Ag3PO4/diatomite can maintain above 95 % photo-degradation activity after five cycles.

Synergetic effect of multi-walled carbon nanotubes (MWCNTs)/nanoclays hybrid was investigated on the properties of highimpact polystyrene (HIPS) nanocomposite foams. The glass transition temperature and the cellular structure including the cell size and cell density were studied in details. Adding MWCNT and nanoclay increased the glass transition temperature of HIPS by 8.5 °C and 1.5 °C, respectively. The experimental results indicated that the cell size of HIPS foams was reduced from 84.05 to 60.97 μm and 40.22 μm using MWCNTs and nanoclays, respectively. The synergetic effect of MWCNT/nanoclay was more significant by reducing the cell size to 13.69 μm. The cell density was improved from 5.79 × 104 to 1.77 × 105 cell/ cm3 using MWCNTs and to 9.39 × 106 cell/cm3 using nanoclays. The cell density reached to 2.90 × 107 cell/cm3 using the synergetic effect of MWCNT/nanoclay.

In this study, epoxy composites were reinforced with multi-walled carbon nanotubes and fused silica particles, dispersing the fillers within the epoxy resin based on a simple physical method using only shear mixing and ultrasonication. The hybrid composite specimens with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles showed improved mechanical properties, with increase in tensile strength and Young’s modulus up to 12 and 37%, respectively, with respect to those of the baseline specimens. The experimental results showed that the low thermal expansion of the silica particles improved the thermal stability of the composites compared with that of the baseline specimen, whereas the thermal expansion slightly increased, due to the increased heat transfer from the exterior to the interior of specimens by the carbon nanotube filler. The coefficient of thermal expansion of the hybrid composite specimen reinforced with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles was decreased by 25%, and the thermal conductivity was increased by about 84%, compared with those of the baseline specimen.

Widespread consumption of fresh-cut vegetables without cooking results in ingestion of major foodborne pathogens including Bacillus cereus. In this study, we aimed to develop a method to rapidly detect B. cereus in fresh-cut vegetables by combining commercial PCR analysis with enrichment of the pathogenic levels. A mixture of B. cereus strains (KCTC1013, KCTC1014, KCTC1092, KCTC1094, and KCTC3624) was inoculated on the surface of fresh-cut cabbage lettuce (20 g) and baby leafy vegetables (10 g) to concentration 1, 2, 3, 4, and 5 log CFU/g. Eighty milliliters of TSB with 0.15% polymyxin B was used for cabbage lettuce, and 90 mL of medium was used for baby leafy vegetables and incubated at 42oC for 0, 2, 3, 4, 5, 6, and 7 h. One milliliter of the enriched media was plated on mannitol-egg yolk-polymyxin agar for quantification, and another 1 mL was used for DNA extraction for PCR analysis. Additionally, the minimum number of sub-samples to be tested from a pack of fresh-cut vegetable samples was determined using 5 sub-samples. The results from this study showed that for detecting B. cereus in fresh-cut cabbage lettuce, 3, 4, 5, 6, and 7 h enrichment were required to at least detect 5, 4, 3, 2, and 1 log CFU/g of B. cereus, respectively. B. cereus in fresh-cut baby leafy vegetables could be detected after 2, 3, 4, 5, and 6 h of enrichment at 5, 4, 3, 2, and 1 log CFU/g, respectively, using a combination of enrichment and PCR analysis. To determine if a pack of fresh-cut vegetable is positive, the minimum number of sub-samples should be 3. These results can be used to develop a rapid detection method to semi-quantify B. cereus in fresh-cut vegetable samples combining enrichment and PCR.

Galacto-oligosaccharides (GOS) are prebiotics that have a beneficial effect on human health by promoting the growth of probiotic bacteria in the gut, in addition to having various applications in the food industry. GOS are generally produced from lactose in a reaction catalyzed by ß-galactosidase. Synthesis of GOS from whey permeate (WP) (ultrafiltration of whey, concentrated then spray dried) using surface engineered β-galactosidase in Pichia pastoris (P. pastoris) is a novel method to convert waste into a valuable product. Cell-surface display is the expression of peptides and proteins on the surface of living cells by fusing them to functional components of cells. Surface engineered cells have many potential uses. The Flo1p flocculation functional domain, thought to be located near the N terminus, recognizes and adheres non-covalently to cell-wall components such as α-mannan carbohydrates, causing reversible aggregation of cells into flocs.

이 논문은 예이츠의 『부활』(1931)이란 희곡이 내포하고 있는 다양한 극적 전략들을 연구한다. 『부활』은 기독교에 대한 이교도적 해석이라는 파격적인 주제를 담은 희곡 『갈보리』를 1920년에 발표한 후 거의 10년 이상이 지나서 같은 주제로 회귀한 결과물이다. 『갈보리』와 같이 『부활』이 기독교 신화를 다루고 댄스 드라마의 형식을 공유하지만 극의 주제를 표현하고 이를 관객이 수용하도록 유도하는 극적 방법에 있어서는 많은 변화가 목격되고 있다. 따라서 이 논문은 극이 보유하고 있는 극작법에 주목해서 『부활』이란 희곡을 재분석하고 그 결과를 기반으로 어떻게 예이츠의 연극이 변화하고 발전하고 있는지를 증명한다. 그리고 결론으로 예이츠의 디에게시스 연극이 1960년 후반이 되어서야 정의 내려진 토탈 연극의 요소를 이미 내재하고 있었다는 것을 주장한다.