The damage aspects of soybean by common cutworm, Spodoptera litura (Fabricius) (Lepidoptera: Noctuidae) at different larval density and different growth stage of soybean were studied in soybean field. The percent yield reduction(Y) of soybean infested by different densities of S. litura (X, no. of larvae/plant) under outdoor conditions for a three week period were estimated by the following equations: (1) Y = 1.655X - 6.025 (R² = 0.952) for the R1 (flowering stage), (2) Y = 0.725X - 0.475 (R² = 0.986) for the R3 (beginning pod stage), and (3) Y=0.635X - 1.325 (R² = 0.986) for the R5 (beginning seed stage). Based on the relationships between the densities of S. litura larvae and the yield index of soybean, the number of larvae (2nd-3rd instar) which caused 5% loss of yield (Tolerable injury level) was estimated to as approximately 6.7 for the R1, 7.5 for the R3, and 10.0 per plant for the R5, respectively. Average soybean leaf areas consumed by 1st, 2nd, 3rd, 4th, 5th and 6th larvae of Spodoptera litura during 24 hr at 28℃ was 0.3, 0.7, 2.6, 4.0, 20.1, and 55.8 ㎠, respectively.

This study was carried out to determine the economic injury level of the rice leaffolder, Cnaphalocrocis medinalis G.. The damage aspects of rice plant (at tilling stage) by leaf folders at different larval density per plant were studied in pot experiment (24 ㎝ in diameter, 18 ㎝ in height). One leaf folder consumed 6-7 leaves during larval stage. The damage by leaf folders was simulated by cutting off 0, 10, 30, 50, 70, and 90% of leaves before and after heading stage July 15th (at panicle initiation stage) and August 15th (at milk stage), respectively. When leaves were cut before the heading of rice, the linear relationships between the leaf cutting rate (X) and each factors of yield (Y) were as following, for grain maturity it was Y = -9.379X + 83.630 (R² = 0.493), Y = 0.139X + 0.490 (R² = 0.925) for yield, and Y = -4.880X + 81.116 (R² = 0.665) for head rice. When leaves were cut after the beading of rice, it was Y = -23.014X + 83.589 (R² = 0.915) for grain maturity, Y = 0.141X + 3.466 (R² = 0.842) for yield, and Y = -13.795X + 81.964 (R² = 0.898) for head rice. We found that when leaf cutting after the heading stage caused more damage than before the heading in terms of yield and yield components. Based on theses results the economic threshold level was estimated to be 30% and 7% leaf loss before and after heading stage.

According to the preceding survey on insect pests of the green perilla, Perilla frutescens var. japonica HARA, The major pests were Aphis egomae Shinji, Pyrausta panopealis (Walker), Tetranychus urticae Koch, Polyphagotarsonemus latus Banks, Tetranychus kanzawai Kishida at Guemsan, Chungnam, 2004. Aphis egomae causes nearly 100% injury of the green perilla in uncontrolled green houses. A field study was conducted to estimate economic injury levels (ElLs) and control thresholds (CTs) for A. egomae injuring green perilla in green houses. Different densities of A. egomae ranged from 1 to 80 aphids per 100 plants in early inoculation. The mean injurying rate of plant was 2.4% to 40.5% at the end of June at differently inoculated levels. The economic loss time calculated by the ratio of cost managing aphid to market price (C/V) (C: cost managing aphid, V: Market price) in early season (from May to 13. June) was 5.8% and in peak season (from 13. June to 30. June) was 9.3%. Economic injury level in early and peak season was 5.3 aphids per plant and economic injury levels in peak season were 0.6 aphids per plant and 7.6% injured rate of plant. The control thresholds calculated by 80% level of economic injury level in peak season were 0.5aphids per plant and 6.1% injury rate of plant, respectively.

  제조업에서는 보다 합리적으로 생산량을 결정함으로써 고객에 대한 납기 준수는 물론, 기업 내부의 비용을 감소시키기 위한 노력을 끊임없이 하고 있다. 합리적인 생산량의 결정은 기업 내적으로는 낭비를 제거하고, 생산 흐름의 안정성을 유지하여 주며, 기업 외적으로는 공급사슬 전체의 자재흐름을 원활히 해주고 고객의 기호 변화에 빠르게 대처할 수 있도록 한다. 이에 본 논문은 보다 높은 고객 만족도와 비용의 절감을 위해서 재고 유지비용과 생산준비비용만을 고려하

The focus of analysis is effect on Non-electrical Machinery and Equipment of Macroeconomic variables through long-term and short-term periods. Also, this paper is related with implication on steady growth possibility of Non-electrical Machinery and Equipment. The period of variables is from 1985 to April in 2005. In case of not-available data is treated as missing figures. As spatial scope, these data are Non-electrical Machinery and Equipment on the basis of KSIC. In case of items, it composes MTI 1&3 digit of Korea International Trade Association (KITA), on the basis of HSK & classification of Korea Machinery industries. According to Granger causality test, yield of Cooperate Bond and export amount of Machinery have a meaning at statistical Confidence level of 10%. In case of index of the unit cost of export and export amount of Machinery, they have an interactive Granger cause. In yen dollar exchange rate and export amount of Machinery, former variable gives an unilateral Granger cause to latter that.

According to Granger causality test, yield of Cooperate Bond and export amount of Machinery have a meaning at statistical Confidence level of 10%. In case of index of the unit cost of export and export amount of Machinery, they have an interactive Granger cause. In yen dollar exchange rate and export amount of Machinery, former variable gives an unilateral Granger cause to latter that. Also, call rate gives an unilateral Granger cause to export amount of Machinery. In case of M3 & export amount of Machinery, former variable have an influence on latter that at 5% Confidence level.

ISO 9000 is a management standard that provides customers with assurance thu their registered suppliers have a consistent quality system to which they adhere. this paper draws on four sources to show how ISO 9000 can lead to performance improvement. 1)theories of induces innovation and improvisation 2) the literature on ISO 9000 3) a case study of a telecom company. we find that the extent to which ISO 9000 is associated with performance improvement depends on the level of its assimilation, and the degree to which an organization goes beyond the minimal requirements of the standard.

Tough Korean architecture and urban environment has been developed for almost 100 years, it still remains various kinds of problems. Many attempts was carried out by every new plan to reduce the problems, it result in requiring more investment than before. It means all the investment for the development has been inefficient and immature to protect economic problems compared with the developed country. For the reason of economic problems it must be studied in historical cases which influenced the economic impacts, before the proposal of index with the economic theory. Searching typical architecture or urban development that brought about economic impacts can be classified into 3 cases. First case is the impact that caused the economic growth, increase, boom like the Westminster & others and the american architectures after the economic crisis. Second case is the impacts that was the origin of decline, shrink in economic as the Palace of Versailles, the skyscrape buildings in america before the economic crisis. Third case is the impact that was the both role of increase and decline in economic as the modern architecture in industrial revolution which led to the national economic growth and the gap between the rich and the poor, and as the american architecture that was the root of crisis and the revival in economic. From the case study, it is clear that architecture has relation with economics in various factors as mass production, labour, and another industries all over the history & the world. Now, architecture strongly needed not only to raise functional, cultural effect and value, but to predict and control the economic impacts with theory from further research of historical cases to policy and practise.

The purposes of this study are to analyze economic effect of prison labor on free market economy and to suggest ways for more effective prison labor industry. The impact of prison labor on non-prison labor has been debated over the years. Proponents have touted the social benefits of decreased net cost of prisons, improved behavior in prison, the potential for low recidivism, and rehabilitation through development of work and social skills. Opponents of prison labor from the beginning have pointed out the private costs of lost jobs and lost sales of industries outside the prison. Although it is very difficult to measure and compare quantitatively benefits and costs of prison labor, there is inverse relationship between prison labor and recidivism rates. According to Federal Bureau of Justice, inmates involved in prison labor has better chance to be employed and to receive higher wage. In addition, the revenue from prison work can pay for the costs of housing them in prison and prison labor leads to increased production of goods and services that can help in developing regional economy. In spite of the advantages of prison labor, it is argued that prisoners work is exploitative and it will displace civilian business and labor. These concerns put in place as the size and scope of prison labor expands and motivate legislative efforts in restricting prison labor. To improve quality of prison labor, the Bureau of Prisons needs to allow more private companies to employ prisoners at reasonable wage and to cultivate useful skills. Moreover, the operation body and methods of correctional work program should be reformed and specialized. It is recommended to consider establishment of special organization that concentrates in operating prison labor industry. Finally, it is suggested to benefits of prison labor should be measured and publicized to ensure quality of correctional work program.

서해 배타적경제수역내 해사채취구역에서 해저지형 변화를 규명하기 위하여 2회에 걸쳐 단일빔음향측심기를 이용한 측심자료를 획득하였다. 교차점 분석에 의한 측심자료의 정확도는 IHO 표준의 2등급에 해당하였다. 지형도는 폭 300 m, 깊이 10 m의 구덩이 형태를 나타내었으며, 이러한 지형의 변화 과정이 두 지형도 수심차의 분포에서 표현되었다. 그러나 해사채취량을 정량화하기 위해서는 더욱 정확하고 정밀한 자료가 요구된다. 이러한 지형변화는 퇴적환경 및 저서생태 환경에 영향을 미칠 수 있으므로 한정된 모래자원을 관리하고 지속가능한 개발을 위해서는 과학적인 조사자료에 근거한 환경영향평가가 요구된다.

This paper is designed a VSI X-CRL synthetic control chart in aspect of economy. We found the optimal sampling interval and various control limit factors under various cost parameters using cost function, proposed Lorenzen and Vance. Optimal design parame

The estimate on volatility of stock price is related with optimum of portfolio and Important for allocation of capital asset. If the volatility of stock price is varied according to macroeconomic variables on monetary policy and industrial production, it will assist capital asset to allocate. This paper is related with stock market volatilities on macroeconomic variables in U.S. and Europe, Korea. And, it Is pertain to vary in time of this variables. Thus, this paper is related with volatilities of monetary and physical macroeconomic variables on basis of statistics. And, it is ranged front capital investment to portfolio allocation. Also, this paper takes out of sample forecast and study more after this. In case Germany, France, Italy and the Netherlands, the relative importance of monetary policy and Industrial production Is different from these countries. In case Italy and the Netherlands, monetary policy is primary factor at stabilizing for volatility of stock price. In case Korea, increasing monetary policy and industrial production is positively affected stock market. It is that the positive effect of stock price is caused by mollifying monetary policy and economic growth. Specially, this conclusion is similar to US. In Korea, gradual increase in monetary and industrial production is necessary to stability of stock market. It is different to previous results on basis of increasing stock price of money in long period.

We developed the logical methods to analyze economic impacts of standardization and cleared up effects of performing KS in micro and macro aspects. This study is performed through analysing foreign studies and results from surveys. The advanced methods pe