방사선과의 상호작용에 의하여 섬광이 발생하는 무기형광체(inorganic fluor)인 cerium activated yttrium silicate(CAYS)를 폴리설폰 고분자막에 함침시킴으로써, 형광 용액의 도움 없이 방사능 오염도를 측정할 수 있는 새로운 측정막을 제조하였다. 막의 제조는 두 가지 공정으로 나누어진다. 우선 고분자와 용매의 균일한 1차 제막용액을 유리판 위에 제막 후 용매증발을 통해 폴리설폰 고분자막이 생성되도록 하였다. 고형화된 폴리설폰 필름 표면에 CAYS가 분산된 고분자 제막용액을 2차로 도포시킨 후, 비용매 욕조에 침지시키는 상전환 공정을 이용하거나 용매의 증발을 통한 유리화에 의해 2차 용액의 고형화를 유도함으로써 함침막을 제조하였다. 이렇게 제조된 막의 형상은 치밀한 구조를 지니는 고분자 지지체와 이에 완전히 고착된 CAYS함침막의 이중구조를 지니게되며, 지지체 부분은 막의 안정성을 2차 제막에서 생성된 부분은 기능성의 향상을 이룰 수 있는 구조적 특성을 지닌다. 제조된 함침막에 방사성핵종을 직접 도포하여 방사성핵종의 탐지 특성을 측정하였을 때 효율적인 탐지 특성을 지니는 것으로 확인되었다.

As the life standard has enhanced, food products has incomparably advanced both in quality and variety to meet the consumer's choice. Despite of high quality and variety, appropriate food safety system has not been established yet in food manufacturing. With Product Liability issuance effective on July 2002, consumers are demanding far higher food safety level than what it used to be. The food manufacturers are seeking food safety assurance system. HACCP system is a pivotal product safety system providing the infrastructure to PL. By the time in the early 1970 when HACCP was developed suitable for food, it comprised the category of Risk, in fact it was quantitative sequence system. In a preparatory phase of HACCP, decision mostly depends on the quantitative analysis. In a recent study, the introduction of Risk Analysis is being reviewed for Food Safety system. In this study, FTA, FMEA are also reviewed in comparison with HACCP which have been utilized in Safety Engineering.

(x=0.69~0.74) powders synthesized by the thermal decomposition of organic acid salts. The obtained powders were uniform in composition and ultra-fine particle with about 400 nm. The amount of spinel phase of these powders was about 50% in X-ray diffraction patterns. The calcination of powder was carried out at for 2 hours in air. After the powders were calcined. the mean size of powder was about 500 nm and the amount of spinel phase was increased over about 65%. The maximum amount of spinel phase was about 75% in the specimen of X=0.72. The magnetic properties of calcined powders were the best among the different among the different compositions

All-vanadium redox flow battery(VRFB) has been studied actively as one of the most promising electrochemical energy storage systems for a wide range of applications such as electric vehicles, photovoltaic arrays, and excess power generated by electric power plants at night time. CPCS has been shown to have the characteristics as an excellent current collector for VRFB and electrochemical properties of specific resistivity 0.31 Ω cm, which were composed of G-1028 80 wt%, PVC 10 wt%, DBP 5 wt% and FS 5 wt%. Energy efficiencies of VRFB with the CPCE and the existing electrode assembly were 84.14 % and 77.24 % respectively, in charge/discharge experiments at constant current of 200 mA, and the CPCE was confirmed to be suitable as the electrode of VRFB.

The current research whose focus is limited on the Service and non-profit industries. For example schools(university), hospitals, banks, etc. Manufacturing industry is foundation of Korea industry. This study analyze and measure efficiency of manufacturing industries by using the DEA(Data Envelopment Analysis). This result is expected to provide the positive evidence useful to enhancing the competitiveness of manufacturing firms in korea.

A law of Korean product liability was enforced on 1st in July for 2002 years. Although it is later than the United States in 25 years, and more later than Japan in 7 years, it have been welcomed a new chances promoting the preservation of consumer"s safety and increasing business compactability toward the small and medium size enterprises. Up to now, The a large enterprise, which have concentrated in export of an advanced country, have already the resistant power against the law of Korean product liability, but the Korean medium and small-sized enterprises were concentrated mainly a domestic market or subcontracting business of a major big company. Relatively very week positions on this Low. If They cannot supply the most safest product in the market, then Those enterprise are confronting the difficulty for surviving. Now the product safety has become more important role to the small and medium size company. Therefore, this paper offered the object and the direction how the company must carry out measures on this product design stage applying safe engineering and Ergonomic Technology for the achieving ongoing development and progress of small ann medium size industry in Korea.

In this research, we investigate the countermeasure of Product Liability through existing research or books for reference about PL and ISO 9000:2000 quality management system. And we analyze relation between PL system and ISO 9000:2000 Quality Management System after compare ISO 9000:2000 and ISO 9000:1994. base on this analysis, we integrate the Quality Management System of company and an important factor of PL system in accordance with the product liability law. So we present a general improvable scheme of ISO 9000:2000 quality management system that reduces overlap of quality business and utilize efficiently.

Our study emphasizes the importance of the review of the manufacturing industry in order help them make right decision and despite many previous methods for analyzing productivity, we were coming to analyze the efficiency of the industry with Date Envelop

Nanoparticles of with a mean particle size of 4-30 nm have been prepared by a pulsed wire evaporation method, and its structural and magnetic properties were studied by SQUID magnetometer and Mossbauer spectroscopy. From the main peak intensity of XRD and absorption rate of Mossbauer spectrum, the amounts of and in as-prepared sample are about 70% and 30%, respectively. The coercivity (53 Oe) and the saturation magnetization (14 emu/g) are about 20% of those of the bulk . The low value of coercivity and saturation magnetization indicate that the phase nearly shows the spin glass-like behavior. Analysis of the set of Mossbauer spectrum indicates a distribution of magnetic hyperfine fields due to the particle size distribution yielding 20 nm of average particle size. The magnetic hyperfine parameters are consistent with values reported of bulk and . A quadrupole line on the center of spectrum represents of superparamagnetic phase of with a mean particle size of 7 nm or below.

Fe-Co nanocomposite powders with different composition were prepared by chemical vapor condensation (CVC) process and their characterizations were studied by means of X-ray diffraction, transmission electron microscopy, and vibrating sample magnetometer. The particles having the mean size of 5~25 nm consisted of metallic cores and oxide shells. The Co contents and particle size increased with increasing the carrier gas flow rate of Co precursor. The saturation magnetization and coercivity increased with increasing Co content. and the saturation magnetization maximized at the 40 wt.%Co. The Fe-Co nanocomposite powder oxidized at showed the maximum coercivity of 1739 Oe.

P/M high speed steels with various Co contents were fabricated by gas atomization and Canning/HIP process. As Co content in P/M high speed steel increased, hardness, transverse rupture strength and yield strength in compressive testing increased due to solid solution hardening of Co in matrix. Especially, PM high speed steels with Co have high deformation resistance to repeated compressive loading.