The purposes of this study were to: (a) identify college students' patronage behaviors, (b) develop an instrument measuring the attitudes of University Students towards university foodservices management practices, (c) determine university students' attitude towards the four types of university foodservices, and (d) provide recommendations on marketing strategies for university foodservice. Questionnaires were hand delivered to 600 Yonsei University students by designated coordinators. A total of 549 questionnaires were usable; resulting in an 93.3% response rate. The survey was conducted between November 28 to December 4, 1995. Statistical data analysis was completed using the SAS Programs for descriptive analysis, T-test, χ2 test, ANOVA, Factor Analysis and Stepwise Multiple Regression. Most (88.3%) of students were patronizing university foodservices for lunch. Underground student foodservice (40.1%) and Restaurants outside the campus (33.7%) were primarily used for lunch and dinner respectively. Eighty six percent of university students had 1 to 2 meals per day at university foodservices. The reasons given by students for patronizing university foodservices were as follows: location, time, price, menu, taste. Most of the respondents were least satisfied with hygiene, taste, menu and atmosphere. Data indicated strong support for eight priori dimensions in terms of food, menu, atmosphere, hygiene, employee attitude, facilities and convenience. After the factor analysis, price, fast service and foodservice location attributes were rearranged, combined and created a new dimension called as 'access'. Three dimensions in terms of menu, hygiene, convenience were important to students although performance was perceived as poor through importance-performance analysis. Most of students were not satisfied with all four types of university foodservices. In terms of food quality and price which university foodservices offer, most of respondents were moderately satisfied. According to multiple regression analysis, 93.31% of the variance respondents' satisfaction score could be explained by food, menu, price, atmosphere, hygiene, employee attitude, facilities, and convenience dimensions.

For the deep geological repository, engineering barrier system (EBS) is installed to restrict a release of radionuclide, groundwater infiltration, and unintentional human intrusion. Bentonite, mainly used as buffer and backfill materials, is composed of smectite and accessory minerals (e.g. salts, silica). During the post-closure phase, accessory minerals of bentonite may be redistributed through dissolution and precipitation due to thermal-hydraulic gradient formed by decay heat of spent nuclear fuel and groundwater inflow. It should be considered important since this cause canister corrosion and bentonite cementation, which consequently affect a performance of EBS. Accordingly, in this study, we first reviewed the analyses for the phenomenon carried out as part of construction permit and/or operating license applications in Sweden and Finland, and then summarized the prerequisite necessary to apply to the domestic disposal facility in the future. In previous studies in Sweden (SKB) and Finland (POSIVA), the accessory mineral alteration for the post-closure period was evaluated using TOUGHREACT, a kind of thermal-hydro-geochemical code. As a result of both analyses, it was found that anhydrite and calcite were precipitated at the canister surface, but the amount of calcite precipitate was insignificant. In addition, it was observed that precipitate of silica was negligible in POSIVA and there was a change in bentonite porosity due to precipitation of salts in SKB. Under the deep disposal conditions, the alteration of accessory minerals may have a meaningful influence on performance of the canister and buffer. However, for the backfill and closure, this is expected to be insignificant in that the thermal-hydraulic gradient inducing the alteration is low. As a result, for the performance assessment of domestic disposal facility, it is confirmed that a study on the alteration of accessory minerals in buffer bentonite is first required. However, in the study, the following data should reflect the domestic-specific characteristics: (a) detailed geometry of canister and buffer, (b) thermal and physical properties of canister, bentonite and host-rock in the disposal site, (c) geochemical parameters of bentonite, (d) initial composition of minerals and porewater in bentonite, (e) groundwater composition, and (f) decay heat of spent nuclear fuel in canister. It is presumed that insights from case studies for the accessory mineral alteration could be directly applied to the design and performance assessment of EBS, provided that input data specific to the domestic disposal facility is prepared for the assessment required.

Since the first operation of the Gori No. 1 nuclear power plant in Korea was started to operate in 1978, currently 24 nuclear power plants have been being operated, out of which 21 plants are PWR types and the rest are CANDU types. About 30% of total electricity consumed in Korea is from all these nuclear power plants. The accumulated spent nuclear fuels (SNFs) generated from each site are temporarily being stored as wet or dry storage type at each plant site. These SNFs with their high radiotoxicity, heat generating, and long-lived radioactivity are currently the only type of high-level radioactive waste (HLW) in Korea, which urgently requires to be disposed of in deep geological repository. Studies on disposal of HLW in various kind of geological repositories have been carried out in such countries as Sweden, Finland, United States, and etc. with their own management policies in consideration of their situations. In Korea long-term R&D research program for safe management of SNF has also been conducted during last couple of decades since around 1997, during which several various type of disposal concepts for disposal of SNFs in deep geological formations have been investigated and developed. The first concept developed was KAERI Reference Disposal System (KRS) which is actually very much similar to Swedish KBS-3, a famous concept of direct disposal of SNF in stable crystalline rock at a depth of around 500 m which has been regarded as one of the most plausible method worldwide to direct disposal of SNF. The world first Finnish repository will be also this type. Since the characteristics of SNF discharged from domestic nuclear reactors have been changed and improved, and burnup has sometimes increased, a more advanced deep geological repository system has been needed, KRS-HB (KRS with High Burnup SNF) has been developed and in consideration of the dimensions of SNFs and the cooling period at the time point of the disposal time, KRS+, a rather improved disposal concept has also been subsequently developed which is especially focused on the efficient disposal area. Recently research has concentrated on rather advanced disposal technology focused on a safer and more economical repository system in recent view of the rapidly growing amount of accumulated SNF. Especially in Korea the rock mass and the footprint area for the repository extremely limited for disposal site. Some preliminary studies to achieve rather higher efficiency repository concept for disposal of SNF recently have already been emphasized. Among many possible ones for consideration of design for high-efficiency repository system, a double-layered system has been focused which is expected to maximize disposal capacity within the minimum footprint disposal area. Based on such disposal strategy a rather newly designed performance assessment methodology might be required to show long-term safety of the repository. Through the study some prerequisites for such methodological development will be roughly checked and investigated, which covers FEP identification and pathway and scenario analyses as well as preliminary conceptual modeling for the nuclide release and transport in near-field, far-field, and even biosphere in and around the conceptual repository system.

Especially for near-surface repository for disposal of the low- and intermediate-level radioactive waste, safety assessment in case of inadvertent human intrusion should be handled seriously. This is because this type of incident will possibly give rise to high acute, not chronic exposure dose even though its occurrence of likelihood could higher than rather deeper geological repository for disposal of high-level radioactive waste over long time span after closure of the repository. Recently well drilling scenario for the pumping groundwater from the aquifer near the repository, among other possible inadvertent human intrusion incidents, has been popularly evaluated for the worst case due to its relatively high possibility of occurrence in parallel with normal scenarios for the nuclide transport for post-closure safety assessment of the repository. Movement of nuclide plume both in the confined and unconfined aquifer under and over a radioactive waste repository is of importance especially around an extracting well. Through this study a simple comment regarding quantification between a pumping rate from the well drilled into the aquifer as well as quantification of the plume size flowing around the well is presented. Drawdown of the well which is the change of water level of the upper water surface of the aquifer due to well pumping makes a cone of depression. And capture zone in the aquifer which is formed around the well, by which the groundwater is removed out, is the groundwater volume or area in the aquifer that is considered to contribute the extraction of the well by pumping. Usually this capture zone does not encompass the entire aquifer thickness for the partially penetrating well, which means that not all the portion of flowing groundwater through the aquifer is drawn by the well. And this capture zone does not need to coincide with the volume of the cone. Furthermore, all the nuclide plume volume is not necessarily and completely mixed with the groundwater flowing the entire aquifer. Therefore, a strategical approach might be required to grasp the aquifer portion and the plume size influenced by pumping to evaluate rather accurate radiological consequences due to the well scenario avoiding overestimation and meaningless conservatism as well, which is especially very common in the mass balance modeling e.g., by GoldSim under assumption that all the groundwater volume from the aquifer near the well extracted by the well. Although the capture zone around the well should be determined both by use of global/local groundwater flow model in the aquifer but a simple analytical model could be sought. Capture zone analysis has been widely seen in the area of the design of groundwater remediation system. If for safety assessment of the subsurface repository the plume behavior in the aquifer under the repository should be well characterized and correctly modeled, then the current study is expected to be more or less helpful to develop a specific mass balance model for nuclide transport and groundwater flow for assessment of an abnormal well drilling scenario near the repository.

When the radioactive nuclides are leaked from a deep geological repository by groundwater, the migration path of the nuclides is mostly consisted of rock fractures to the surface biosphere. Thus, assessing the safety of the disposed radioactive wastes depends upon understanding of nuclide migration in the fractured rocks. Fractures in rocks tend to dominate the hydrological characteristics of the dissolved nuclides. To study migration of nuclides in the rock fracture, a granite block of 1 m scale was quarried from the Hwangdeung site. The block has a single natural fracture. The six faces of the rock including fracture gaps were sealed with silicone adhesives to prevent leaking or diffusion of the water. Usually flow in fractured rock is unevenly distributed and most of the water flow occures over a small portion of the fracture zone, that is so called channeling flow. It is caused by uneven distribution of apertures in a fracture field. Flow rate is proportional to the cubic of the aperture. Thus, figuring out aperture distribution in a fracture field is the most important step on the study of the migration of nuclides in the fractured region. The ideal way to figure out the aperture distribution in a fractured rock is to use a non-destructive tool such as X-ray tomagraphe. However, it has a limitation of scale, that is, less than about 30 cm. It is not easy to give a good resolution for this quarried rock of 100×60×60 cm scale. It gives complex and vague images of the fracture. The optimum way to get an aperture distribution in a fractured rock is to drill some boreholes to the fracture and to carry out hydraulic tests. The more number of boreholes gives the more accurate information, but the more disturbance to the fracture field. Thus, it is necessary to optimize between aperture information and disturbing fracture field by selecting a suitable number of boreholes. We drilled nine boreholes from the upper surface of the rock mass just to the fracture without penetrating the fracture. And we carried out dipole tests for the matrix set of 9 boreholes. From each dipole test, an effective average aperture was calculated with the data of flow rate and hydraulic head. Then aperture distribution in the fracture field is calculated with a modified Krigging method. As a result, the aperture is distributed in the range of about 0.03~0.16 mm.

This work provided a review of three techniques—(1) spectrochemical, (2) electrochemical, and (3) spectroelectrochemical– for molten salt medias. A spectroelectrochemical system was designed by utilizing this information. Here, we designed a spectroelectrochemical cell (SEC) and calibrated temperature controllers, and performed initial tests to explore the system’s capability limit. There were several issues and a redesign of the cell was accomplished. The modification of the design allowed us to assemble, align the system with the light sources, and successfully transferred the setup inside a controlled environment. A preliminary run was executed to obtain transmission and absorption background of NaCl-CaCl2 salt at 600°C. It shows that the quartz cuvette has high transmittance effects across all wavelengths and there were lower transmittance effects at the lower wavelength in the molten salt media. Despite a successful initial run, the quartz vessel was mated to the inner cavity of the SEC body. Moreover, there was shearing in the patch cord which resulted in damage to the fiber optic cable, deterioration of the SEC, corrosion in the connection of the cell body, and fiber optic damage. The next generation of the SEC should attach a high temperature fiber optic patch cords without introducing internal mechanical stress to the patch cord body. In addition, MACOR should be used as the cell body materials to prevent corrosion of the surface and avoid the mating issue and a use of an adapter from a manufacturer that combines the free beam to a fiber optic cable should be incorporated in the future design.

This study was conducted to propose a way to increase the accuracy and precision of β-ray measurement equipment. Statistical processing results of equivalent evaluation data from 2016 to 2021 confirmed that the concentration of micro dust measured by β-ray measurement equipment was higher than that of micro dust sampler. According to quarterly data, it was confirmed that the data from the third quarter (July to September) showed a different trend from other periods, which is assumed to be due to weather conditions. This study indicates that automatic micro-dust measurement equipment evaluation at air pollution measuring stations during the third quarter should be excluded. The evaluation cycle should be changed from once every two years to quarterly. In addition, when the criterion for determining equivalence evaluation falls within the range of the slope and intercept values of the existing trend line, it is necessary to evaluate the R2 value together and reduce the slope from 0.9-1.1 to 0.9-1.0.

While there a growing interest in Voluntary Carbon Disclosure (VCD), comparatively little is discussed whether the improved quality of voluntary carbon disclosure can lead to subsequent changes in a company’s carbon reduction performance. Drawing on companies under the Korean Emission Trading Scheme (ETS) with the contents analysis of their sustainable reports, the present research seeks to address the existing knowledge gaps in the current literature on environmental disclosure. Findings empirically show that an increase in the voluntary carbon disclosure score is positively transformed into changes in carbon performance and further develop that the effect of voluntary carbon disclosure on carbon performance varies depending on changes in management capability with the moderation effect.

From an L2 experimental perspective, the present paper aims at shedding new lights on the nature and the source of exhaustiveness in the two English constructions: (i) ‘it’-clefts; ‘only’-foci. We report experimental evidence that the cancellation of the exhaustiveness construal normally available to the constructions at issue gives rise to different processing costs. Specifically, we provide the results by comparing the ERP patterns that arise when the (marked) cancellation of exhaustiveness is processed in either ‘it’-clefts or ‘only’-foci. Our findings show that during on-line sentence processing, highly proficient Korean English leaners can discern the two different types of exhaustiveness, which in turn indicates that they can recruit different levels of linguistic structure.

The study aims to measure the productivity of the Saudi banking sector at the retail level using secondary data for 11 local banks from the period 2015-2019. The study uses an extended version of the Cobb-Douglas production function to account for the fact that as banks openup more retail branches, they will need to employ more labor. The extended Cobb-Douglas production function was estimated using the two-way fixed effect model to account for unobserved heterogeneity across Saudi banks resulting from differences in labor competencies and leadership style. Besides, the model accounts for unobserved heterogeneity among Saudi banks due to the advancement in electronic services over time. The results showed that labor, branches, customers’ deposits, and fixed deposits have a positive effect on the total value of generated loans. Conversely, ATM has an insignificant effect on generated loans. The average scale elasticity shows that the Saudi banks at the retail level are operating under decreasing returns to scale. The average marginal rate of technical substitution shows that Saudi banks need at least one ATM to replace one unit of labor at the retail level while keeping the same level of output.

The research objective was to find out how Total Quality Management (TQM) mediates antecedents of employee performance variables? The research was conducted with a quantitative approach while the research design was cross sectional. The research model was tested using the structural equation modeling approach with partial least square analysis tools to test the influence among research variables. The research sample consisted of 315 respondents who answered a questionnaire in August-September 2019 at manufacturing companies in East Java. The results showed that situational leadership did not affect employee performance, but did affect the successful implementation of TQM. The performance measurement system has no direct effect on employee performance. The performance measurement system has a direct effect on employee performance. Organizational culture has a direct effect on both employee performance and the application of TQM, so that the application of TQM can improve employee performance. TQM implementation variable acts as a mediation between situational leadership and organizational culture on employee performance. The relationship that was originally a direct influence turned into an indirect effect through TQM. The TQM variable is not proven to be an intervening variable between the performance measurement system and employee performance. There is a direct relationship between these two variables.

This study examines simultaneous relationships between regulatory capital, risk, and cost-inefficiency for a sample of 30 commercial banks in Bangladesh from 2006 to 2018. To conduct the analysis, we used the Generalized Methods of Moments (GMM) in an unbalanced panel data framework. The empirical results show that there is a negative and significant relationship between capital regulation and credit, and overall risk. It is also evident from the results that the capital adequacy ratio is positively and significantly related to default risk and liquidity risk. Therefore, higher capitalized banks take an effort to prevent more credit risk and promote financial stability by reducing liquidity risk. Results also report that banks have been characterized as inefficient, less capitalized, and high risk. On the other hand, efficient banks are more stable but have a high level of liquidity risk. Besides, from the size of the bank, large banks are defined as having lower regulatory capital, are more risk seekers but stable with higher cost-efficiency. Notably, higher capitalized banks are more profitable and cost-efficient by reducing risk. Finally, this study also provides some insightful policy suggestions to the stakeholders.

2019년 초연된 최우정의 오페라 ≪1945≫는 한국 창작오페라 70년사에서 유의미한 발자취를 남긴 작품으로 평가된다. 그 바탕에는 물론 한국어로 된, 한국인의 삶과 사회가 녹아 있는 대본의 힘이 깔려있으며, 이는 관객들의 공감을 사고 보편성을 획득하게 하였다. 그러나 오페라 장르의 특성상, 무엇보다 중요한 것은 ‘음악’이다. 본 논문은 작곡가 최우정의 오페라 작곡기법을 라이트 모티브의 활용, 극적 요소를 연출하는 음악, 인용 기법과 작곡 방식의 세 가지 범주로 나누어 살펴보았다. 결과적으로, 최우정의 오페라 ≪1945≫는 ‘파편적’으로 존재하는 여러 음악재료들이 서로 유동적인 ‘절합’의 관계를 맺고 있고 수직⋅수평적 측면에서 대위적으로 직조되는 ‘다성부적 방식’으로 작곡되었음을 밝혔다.

The purpose of this study is to examine how the Indian banks have adjusted their risk-based capital ratios during 2009–2018 to meet the regulatory requirements. Banks can, in principle, increase their risk-based regulatory capital ratio, either by increasing their levels of regulatory capital or by shrinking their risk-weighted assets by adjusting asset growth or risk in the portfolio. We investigate banks’ capital behavior by decomposing the change in the capital ratio into the contribution of its components and analyzing their variance across regulatory regimes and banks’ ownerships. We further investigate how each component of the capital ratio is adjusted by the banks by breaking down them into balance sheet items. We find that the banks’ capital behavior significantly differed between public and private sector banks and between the two regulatory regimes. During Basel II, banks, in general, followed a strategy of aggressive asset growth with increased risk-taking. The decline in the CRAR because of such an expansionary strategy was adjusted by augmenting additional capital. However, during Basel III, due to higher capital requirements, both in terms of quantity and quality, banks followed a strategy of cutting back their asset growth and reducing the risk in their portfolio to maintain their CRAR.

The study aims to compare the effects of employing investment deposits (joint and specified investment deposits) in Islamic banks, and investment deposits (term deposits and deposits with notification) at conventional banks, on shareholders’ profitability, represented by the earnings per share (EPS), in light of operational profits as a controlling variable. Data related to the study variables was collected from the annual financial reports published by the study sample banks, during the period (2009-2018). The study relies on multiple regression to test the hypotheses of the study. The high adjusted R² to explain the change in EPS for Islamic banks model as compared to conventional banks, is a result of the high difference between investment deposits (specified and joint) at Jordanian Islamic banks and investment deposits (term deposits and deposits with notification) at Jordanian conventional banks. The study found that it is important for the managements of Islamic banks to adopt a uniform method to combine speculative funds, in order to develop and improve shareholders’ profitability. The study recommended Islamic banks to follow practical, methodological and transparent approaches to calculate the rates of Murabaha profit margins between shareholders and depositors, while also taking into consideration some of the issues which could be harmful for the competition between Islamic and conventional banks.

The purpose of this study is to shed light on the driving motivations of contributing social word of mouth on social networking sites (sWOM) toward both tangible and intangible products. In order to develop a research model, this study adopts the motivation theory and TAM model. Data was collected from 904 members of the cosmetic and restaurant communities by using the snowball method. After assessing the validity of all constructs, the structural equation modeling (SEM) is used to test the proposed hypotheses. Results show that personal motivations (satisfaction, opinion leadership, self-enhancement, and economic incentives) and characteristics of sWOM (Perceived Usefulness and Ease of Use) have positive effect on exposure and engagement behaviors. Here are our specific findings, (1) customer satisfaction positively affects online interactions on SNSs such as Like or Sharing a content; (2) sWOM contribution behavior exists in two structures (Exposure and Engagement) and affects each other; (3) This study combines two groups of personal motivation and TAM to conceptualize a research model; and (4) The motivations of contributing sWOM between a specified service and product are rather similar. These findings help digital managers to understand consumers’ behavioral contributions on SNSs and also provide interesting insights for marketers.

This study examines the nonlinear relationship between financial development and economic growth in Pakistan using the threshold regression model for the period 1980-2017. We also employed quantile regression with 0.25, 0.50, and 0.75 quantiles of conditional distribution. The quantile regression is based on minimizing of sum of squared residuals. The result indicates that economic growth responds positively to financial development when the level of financial development surpasses the threshold value of 0.151. However, when financial development lies below the threshold value (that is, 0.151), its impact on economic growth is negative. Thus, when financial development of Pakistan surpasses the threshold level, it contributes more towards economic growth since greater level of financial development contributes more to boosts economic growth. This finding reveals that economic growth reacts differently to financial development, and the relationship between financial development and economic growth is U-shaped in Pakistan. Among the other variables, physical capital, labor force, and government expenditure exert a positive effect on economic growth. Furthermore, inflation rate and trade openness have an insignificant impact on economic growth. The results of quantile regression also confirm the non-linear relationship between financial development and economic growth in Pakistan. The finding of this study suggests revamping of financial sector policies in Pakistan.

The purpose of this study is to provide benefits and ethically-rooted managerial implications based on theoretical underpinnings through an empirical study using correlation between wages, bank credit, government expenditure on economic growth, and employment via a case study in Indonesia. Besides that, managerial implications strive to provide benefits to the government regarding the importance of establishing effective and pro-development regulations to realize economic growth and employment through the efficient role of wages, bank credit, and government spending. This study uses secondary macroeconomic data from the period 2010-2019 with analysis using the correlation test with the Pearson correlation method. Out of eight hypotheses tested, two hypotheses do not have a significant correlation. The details of the statistical results obtained the following correlations: the correlation between bank credit and wages has a significant, but indirect (negative) correlation. However, the correlation between bank credit and economic growth has a direct and significant (positive) correlation. Government expenditure correlates positively with wages, but correlates negatively with bank credit. Wages are positively correlated with economic growth, but have no significant effect on employment. Finally, economic growth has a positive correlation with government expenditure, but does not have a significant correlation with employment.