As the acceptance criteria for low-intermediate-level radioactive waste cave disposal facilities of Korea Radioactive Waste Agency (KORAD) were revised, the requirements for characterization of whether radioactive waste contains hazardous substances have been strengthened. In addition, As the recent the Nuclear Safety and Security Commission Notice (Regulations on Delivery of Low- Medium-Level Radioactive Waste) scheduled to be revised, the management targets and standards for hazardous substances are scheduled to be specified and detailed. Accordingly, the Korea Atomic Energy Research Institute (KAERI) needs to prepare management methods and procedures for hazardous substances. In particular, in order to characterize the chemical requirements (explosiveness, ignitability, flammability, corrosiveness, and toxicity) contained in radioactive waste, it must be proven through documents or data that each item does not contain hazardous substances, and quality assurance for the overall process must be provided. In order to identify the characteristics of radioactive waste that will continue to be generated in the future, KAERI needs to introduce a management system for hazardous substances in radioactive waste and establish a quality assurance system. Currently, KAERI is thoroughly managing chelates (EDTA, NTA, etc.), but the detailed management procedures for hazardous substances related to chemical requirements in radioactive waste in the radiation management area specified above are insufficient. The KAERI’s Laboratory Safety Information Network has a total periodic regulatory review system in place for the purchase, movement, and disposal of chemical substances for each facility. However, there is no documents or data to prove that the hazardous substances held in the facility are not included in the radioactive waste, and there are no procedures for managing hazardous substances. Therefore, it is necessary to establish procedures for the management of hazardous substances, and we plan to prepare management procedures for hazardous substances so that chemical substances can be managed according to the procedures at each facility during preliminary inspection before receiving radioactive waste. The procedure provides definitions of terms and types of management targets for each characteristic of the chemical requirements specified above (explosiveness, ignition, flammability, corrosiveness, and toxicity). In addition, procedure also contains treatment methods of radioactive waste generated by using hazardous substances and management methods of in/out, quantity, history of that substances, etc. As the law is revised in the future, management will be carried out according to the relevant procedures. In this study, we aim to present the hazardous substance management procedures being established to determine whether radioactive waste contains hazardous substances in accordance with the revised the notice and strengthened acceptance criteria. Through this, we hope to contribute to improving reliability so that radioactive waste could be disposed of thoroughly and safely.

To evaluate the inventory of radionuclides for the disposal of waste generated from nuclear power plants, indirect assessment methods such as the scaling factor method or average radioactivity concentration method can be applied. A scaling factor represents the average concentration ratio between key radionuclides and difficult-to-measure (DTM) radionuclides, while the average radioactivity concentration refers to the average concentration of DTM radionuclides, regardless of the concentration of key radionuclides or within specific ranges of key radionuclide concentrations. These indirect assessment methods can be statistically derived through the analysis of representative drums. This study will address how to apply these scaling factors and average radioactivity concentrations. Firstly, the concentration of gamma-emitting radionuclides will be analyzed using a drum radionuclide analyzer, and the concentration of DTM radionuclides will be determined by applying scaling factors specific to each DTM radionuclide. In the case of using the average radioactivity concentration method, the average concentration of DTM radionuclides will be applied independently of the concentration of gamma-emitting radionuclides. It is crucial to perform radioactive decay correction based on the date of generation or disposal when applying scaling factors or average radioactivity concentration. Additionally, for repackaged 320 L drums, determining which drum among the two 200 L drums inside should serve as the reference is of utmost importance

To effectively assess the inventory of radionuclides generated from nuclear power plants using a consistent evaluation method across diverse groups, it is imperative to analyze the similarity in radioactive distribution between these groups. Various methodologies exist for evaluating this similarity, and the application of statistical approaches allows us to establish similarity at a specific confidence level while accounting for the dataset size (degrees of freedom). Initially, if the variance characteristics of the two groups are similar, a t-test for equal variances can be employed. However, if the variance characteristics differ, methods for unequal variances should be applied. This study delineates the approach for assessing the similarity in radioactive distribution based on the analytical characteristics of the two groups. Furthermore, it delves into the results obtained through two case studies to offer insights into the assessment process.

Radioactive liquid waste generated during the operation of domestic nuclear power plants is treated through a somewhat different liquid radwaste system (LRS) for each plant. Prior to the introduction of standard nuclear power plants, LRS used a concentrated water dry system (CWDS) to evaporate liquid waste and manage it in the form of dry powder. The boron-containing radioactive liquid waste dry powder was solidified using paraffin from 1995 to 2010, and about 3,650 drums (based on 200 L) of paraffin solidified drums are currently stored in nuclear power plants. Paraffin solidification drums do not meet the acceptance criteria for radioactive waste repositories because it is difficult to secure the homogeneity of the solidified body and there are concerns about leaching of radioactive waste due to the low melting point of paraffin. In order to solve this problem and safely permanently dispose of paraffin solidification drums, the characteristics of dry powder paraffin solidification drums containing boron-containing radioactive liquid waste must be analyzed and appropriate treatment technology utilizing the results must be introduced. This study analyzes the physical properties of paraffin, the chemical properties of boron-containing radioactive waste dry powder, and the physicochemical properties of paraffin solidification powder, and proposes an appropriate alternative technology for treating boron-containing radioactive waste dry drum. When disposing of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder, the solidification body must be effectively withdrawn from the drum and the paraffin must be completely separated from the solidification body. When disposing the drum, the solidified material must be effectively extracted from the drum and the paraffin must be completely separated from the solidified material. Afterwards, the paraffin must be self-disposed, and the radioactive waste must be disposed of in accordance with acceptance criteria of repository. We looked at how each characteristic of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder can be utilized in each of the above treatment processes.

To safely dispose of highly radioactive spent resin and concentrate waste generated through nuclear power plant operations, it is essential to meet the physicochemical properties requirements of the packages and ensure the accuracy and reliability of radiological characteristics determination. Both spent resin and concentrate are packaged in high-integrity containers (HICs) after drying and are homogeneous waste products generated in the primary system and liquid radioactive waste treatment system. Meeting the physicochemical properties requirements does not appear to be difficult. However, to achieve reliable radiological characterization of high-integrity container packages, it is necessary to take a representative sample and perform accurate radiological analysis. Therefore, this paper discusses the methodology for evaluating the radionuclide inventory of high radioactive resin and concentrate packages, as well as the essential element technology and considerations. For relatively high radioactive resin and concentrate packages, the radionuclide inventory for each package should be evaluated with high reliability through direct radiological analysis of the representative samples collected for each package. This can contribute to the efficient operation of radioactive waste disposal facilities. Radionuclide-specific concentrations directly analyzed for each package will be managed in a database. As analytical data accumulates and direct measurements of high-integrity container package such as the radwaste drum assay system (RAS) become feasible, statistical techniques such as correlation analysis between easy-tomeasure (ETM) nuclides and difficult-to-measure (DTM) nuclides can lead to the development of efficient and reasonable indirect evaluation methods, such as scaling factor and the mean activity concentration method. As for the element technology, a remote representative sampling technique should be developed to safely and effectively take representative samples of highly radioactive materials, including granulated or hardened concentrate waste. Considerations should also be given to determining the sample quantity representing each package, as well as establishing radiation calibration and measurement methods appropriate to the radiation levels of the representative samples.

Dry active wastes (DAWs) are combustible waste generated during the operation and decommissioning of nuclear facilities, and are known to be generated in the amount of approximately 10,000 to 40,000 drums (based on 200 L) per unit. It consists of various types of protective clothing, paper, and plastic bags, and is stored in radioactive waste storage facilities. Therefore, reducing the volume of DAWs is an important issue in order to reduce storage costs and utilize the limited space of waste storage facilities. Heat treatment such as incineration can dramatically reduce the volume of waste, but as the waste is thermally decomposed, CO2, a global warming gas, is generated and there is a risk of emissions of harmful gases including radionuclides. Therefore, a heat treatment process that minimizes the generation of CO2 and harmful gases is necessary. One of the alternatives to incineration is to carbonize DAWs, dispose of carbonized materials below the release standard as non-radioactive waste, and selectively separate and stabilize inorganic components, including radionuclides, from carbonized DAWs. In this study, 13 types of DAWs generated from nuclear power plants were selected and their thermal decomposition characteristics were investigated to design a heat treatment process that replaces incineration. As a result of TGA analysis, the temperature at which thermal decomposition of each waste begins is 260-300°C for cotton, 320-330°C for paper, 315-420°C for synthetic fiber, 350°C for latex gloves. The mass of most samples decreased to less than 1 % of the initial weight after heat treatment, and dust suit and latex gloves had residues of 13.83% and 13.71% of the initial mass, respectively. The metal components of the residue produced after heat treatment of the sample were analyzed by EDS. According to the EDS results, cotton contains Ca and Al, paper contains Ca, Al and Si, synthetic fiber contains Ca, Cu and Ti, latex gloves contain Ca and Mg. Additionally, ICP analysis was performed to quantify the inorganic components. These results are expected to be applicable to the processing of DAW generated at nuclear facilities in the future.

Recently, the nuclear decommissioning and environmental restoration industries has significantly attracted as a new industry field due to the decision to decommission the KORI#1 and WOLSONG #1 nuclear power plant. In order to dispose of the decommissioning radioactive wastes generated during nuclear decommissioning, proper analysis is required, and disposal decisions are determined based on the analysis results. When dismantling a nuclear power plant, a few thousand of tons decommissioning waste are produced, so these require analysis for proper disposal. Therefore, a radionuclide facility for decommissioning waste analysis is essential for the disposal of the large quantities of decommissioning waste generated during nuclear power plant decommissioning. Korea Research Institute of Decommissioning (KRID) was established radionuclide analysis facilities to address above issues and support nuclear power plant decommissioning projects. The plan is to perform classification by type and radionuclide for all waste produced during nuclear power plant decommissioning and to support the disposal of radioactive wastes. In addition, we plan to establish validation methods for samples where verification methods are not established, in order to conduct efficient analysis and management. In this presentation, we will introduce the radionuclide facility currently under construction at KRID and present the space design, equipment layout, and utilization plans.

Spent ion exchange resins have been generated during the operation of nuclear facilities. These resins include radioactive nuclides. It is needed to fabricate them into a stable form for final disposal. Cement solidification process is a useful method for the fabrication of them into a waste form for final disposal. In this study, proper conditions for the fabrication of them into a stable waste form were determined using the cement solidification process. In-drum waste forms were then produced at the conditions, where the stability of representative samples was evaluated for final disposal. The samples were satisfied to the Waste Acceptance Criteria for low and intermediate level radioactive waste disposal sites. This result can be utilized to derive optimal conditions for the fabrication of spent ion exchange resins into a final disposal form.

There is a large amount of radioactive waste in waste storage in the Korea Atomic Energy Research Institute. Some of the radioactive waste was generated during the dismantling process due to Korea Research Reactor 1&2 and it accounts for 20% of the total waste. Radioactive waste must be reduced by appropriate disposal methods to secure storage space and to reduce disposal costs. Research Reactor wastes include wastes that are below the acceptable criteria for selfdisposal and non-contaminated wastes, so they can be treated as wastes subject to self-disposal through contamination analysis and reclassification. In order to deregulation radioactive waste, it is necessary to meet the self-disposal standards stipulated in the Domestic Nuclear Act and the treatment standards of the Waste Management Act. The main factors of deregulation are surface contaminant, radionuclide activity and dose assessment. To confirm the contamination of waste, surface contaminant and gamma nuclide analysis were performed. After homogenizing the waste sample, it was placed in 1 L Mariinelli beaker. When collecting waste samples, 1 kg per 200 kg of waste was collected. The concentrations of the major radionuclides Co-60, Cs-134, Cs-137, Eu-152, and Eu-154 were analyzed using HPGe detector. To evaluate radiation dose, various computational programs were used. A dose assessment was performed with the analyzed nuclide concentration. The concentrations of representative nuclides satisfied the deregulation acceptance criteria and the results of the dose assessment corresponding to self-disposal method was also satisfied. Based on this results, KAERI submitted the report on waste self-disposal plan to obtain approval. After final approval, Research Reactor waste is to be incinerated and incineration ash is to be buried in the designated place. Some metallic waste has been recycled. In this study, the suitability of deregulation for self-disposal was confirmed through the evaluation of the surface contaminant analysis, radionuclide concentration analysis and dose assessment.

The primary objective of this study is to evaluate a systematic design’s effectivity in remediating actual uranium-contaminated soil. The emphasis was placed on practical and engineering aspects, particularly in assessing the capabilities of a zero liquid discharge system in treating wastewater derived from soil washing. The research method involved a purification procedure for both the uranium-contaminated soil and its accompanying wastewater. Notably, the experimental outcomes demonstrated successful uranium separation from the contaminated soil. The treated soil could be self-disposed of, as its uranium concentration fell below 1.0 Bq·g−1, a level endorsed by the International Atomic Energy Agency for radionuclide clearance. The zero liquid discharge system’s significance lay in its distillation process, which not only facilitated the reuse of water from the separated filtrate but also allowed for the self-disposal of high-purity Na2SO4 within the residues of the distilled filtrate. Through a comparative economic analysis involving direct disposal and the application of a remediation process for uranium-contaminated soil, the comprehensive zero liquid discharge system emerged as a practical and viable choice. The successful demonstration of the design and practicality of the proposed zero liquid discharge system for treating wastewater originating from real uranium-contaminated soil is poised to have a lasting impact.

The deep geological repository for high-level radioactive waste requires careful consideration due to its exceptionally long-term implications, making long-term impact assessments essential. However, evaluating the long-term effects of deep geological repositories using performance assessment models is accompanied by various sources of uncertainty, including uncertainties about the future, model uncertainties, and uncertainties associated with input data. These multifaceted uncertainties arise from factors such as a lack of current knowledge, contributing to a complex web of unpredictability. Managing, mitigating, and ultimately eliminating these uncertainties is crucial for ensuring the performance and safety of deep geological repositories. Currently, the Korea Radioactive Waste Agency (KORAD) is developing a complex behavior model that incorporates Thermal-Hydraulic-Mechanical-Chemical (THMC) phenomena within the disposal system using PFLOTRAN. To address model uncertainties and furthermore input data uncertainties for this intricate model, an automated sensitivity analysis system has been developed. This automated system operates without human intervention, facilitating tasks such as automatic parameter adjustments and the quantification of uncertainties. Furthermore, this system aids in identifying key factors characterized by substantial uncertainties. Through this system, it is possible to examine concentration distributions in each components of the deep disposal facility in response to changes in input data and to identify factors with significant uncertainties. The sensitivity results and key uncertainty factors obtained through this system are intended to be used for optimizing uncertainties in future research and development.

Deep disposal facility for High-Level radioactive Waste (HLW) uses a multi-barrier system to prevent the leakage of radionuclide. As a part of the engineered barrier, bentonite is primarily considered as the main buffering material. This is due to the adsorption and swelling properties of the bentonite, which are expected to effectively impede leakage of the radionuclide. In many cases, adsorption is generally regarded as occurring only within the buffer zone. However, several research has been conducted to explore the possibility of bentonite intrusion into the Excavation- Damaged Zone (EDZ) generated during excavation processes, because of the swelling properties of the bentonite. Generally, for host rock near the deep disposal facility such as granite, groundwater flows through the fracture network. Therefore, analysis of the characteristics of the fracture network is essential for predicting the behavior of radionuclide in groundwater. Accordingly, the bentonite intrusion into the fracture network is critical for safety assessment of the deep disposal facility. To analyze this, hydro-geochemical model was established utilizing COMSOL Multiphysics and PHREEQC, observing changes of the behavior of U (VI) along fracture network due to the swelling of bentonite. Modeling was conducted with progressively changing intrusion depth of the bentonite. According to the results, the behavior of U (VI) exhibited significant changes depending on the connectivity of the fractures. Based on the distribution characteristics of the fracture network, heterogeneous groundwater flow was observed. U (VI) was transported through the preferential pathway, which indicates high connectivity, due to the rapid groundwater flow. Notably, when changing the intrusion depth of bentonite, significant differences in behavior of U (VI) were observed in the 0-20 cm case. In contrast, as the intrusion depth increased, it was observed that differences became less evident. These results indicate that changes in the properties of fracture network in EDZ due to the swelling of bentonite significantly influence the behavior of U (VI).

High level radioactive waste (HLW) final disposal repository is faced thermos-hydro-mechanical - radioactive condition because it is placed over 500 m in depth and waste emits decay heats for decades. Repository will be operated around 100 years and will be closed after all the wastes are disposed. The integrity of engineered barriers including buffer, backfill, concrete plug and canister and natural barrier (natural rock mass) will be stood during operating periods. Monitoring sensors for concrete and rock mass is conducted using piezo based sensors such as accelerometer or acoustic emission (AE) sensors. Typical accelerometer for harsh conditions is commonly expensive and data/power cable can be a potential groundwater inflow and nuclide outflow path. The fiber optic accelerometer whose data and power cable are united and has limited volume. Therefore, it can be a potential alternative sensor of piezo based sensors. The temperature limits and accelerated tests for fiber optic sensors are conducted. Most of sensors gives a malfunction around 130°C. The results of these experimental tests give a possibility of communications in compacted bentonite buffer and will be utilized for the design of monitoring systems for the repository.

The occurrence of shear failure in a rock mass, resulting from the sliding of joint surfaces, is primarily influenced by the surface roughness and contact area of these joints. Furthermore, since joints serve as crucial conduits for the movement of water, oil, gas, and thermal energy, the aperture and geometric complexity of these joints have a significant impact on the hydraulic properties of the rock mass. This renders them critical factors in related industries. Therefore, to gain insights into the mechanical and hydraulic behavior of a rock mass, it is essential to identify the key morphological characteristics of the joints mentioned above. In this study, we quantified the morphological characteristics of tensile fractures in granitic rocks using X-ray CT imaging. To accomplish this, we prepared a cylindrical sample of Hwang-Deung granite and conducted splitting tests to artificially create tensile fractures that closely resemble rough joint surfaces. Subsequently, we obtained 2D sliced X-ray CT images of the fractured sample with a pixel resolution of approximately 0.06 mm. By analyzing the differences in CT numbers of the rock components (e.g., fractures, voids, and rock matrix), we isolated and reconstructed the geometric information of the tensile fracture in three dimensions. Finally, we derived morphological characteristics, including surface roughness, contact area, aperture, and fracture volume, from the reconstructed fracture.

The operation time of a disposal repository is generally more than one hundred years except for the institutional control phase. The structural integrity of a repository can be regarded as one of the most important research issues from the perspective of a long-term performance assessment, which is closely related to the public acceptance with regard to the nuclear safety. The objective of this study is to suggest the methodology for quantitative evaluation of structural integrity in a nuclear waste repository based on the adaptive artificial intelligence (AI), fractal theory, and acoustic emission (AE) monitoring. Here, adaptive AI means that the advanced AI model trained additionally based on the expert’s decision, engineering & field scale tests, numerical studies etc. in addition to the lab. test. In the process of a methodology development, AE source location, wave attenuation, the maximum AE energy and crack type classification were subsequently studied from the various lab. tests and Mazars damage model. The developed methodology for structural integrity was also applied to engineering scale concrete block (1.3 m × 1.3 m × 1.3 m) by artificial crack generation using a plate jacking method (up to 30 MPa) in KURT (KAERI Underground Research Tunnel). The concrete recipe used in engineering scale test was same as that of Gyeongju low & intermediate level waste repository. From this study, the reliability for AE crack source location, crack type classification, and damage assessment increased and all the processes for the technology development were verified from the Korea Testing Laboratory (KTL) in 2022.

In environments where buffer materials are exposed to increased temperature due to the decay heat emitted by radioactive waste, it is crucial to assess the performance of the buffer material in relation to temperature effects. In this study, we conducted experiments using Bentonil-WRK, a calcium-type bentonite, compacted to a dry density of 1.65 g/cm3 and an initial water content of 15%. The experimental temperature conditions were set to 30, 60, 90, 110, and 130°C. We observed that the swelling pressure of the compacted bentonite buffer decreased as the temperature increased. The findings from this study can provide valuable guidance for the design of high-level waste repository in Korea.

The disposal of spent nuclear fuel (SNF) in a deep geological repository (DGR) is a widely accepted strategy for the long-term sequestration of radiotoxic SNF. Ensuring the safety of a DGR requires the prediction of various reactions and migration behaviors of radionuclides (RNs) present in SNF within its geochemical surroundings. Understanding the dissolution behaviors of mineral phases harboring these RNs is crucial, as the levels of RNs in groundwater are basically linked to the solubility of these solid phases. Accurate measurements of solubility demand the use of welldefined solid materials characterized by chemical compositions and structures. Herein, we attempted the synthesis of sklodowskite, a magnesium-uranyl (U(VI))-silicate, employing a twostep hydrothermal synthetic approach documented previously. Subsequently, we subjected this synthesized sklodowskite to various analytical techniques, including powder X-ray diffraction (pXRD), scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDX), and vibrational spectroscopies (FTIR and Raman). Based on our findings, we confidently identify the obtained mineral phase as sklodowskite (Mg[UO2SiO3OH]2·5H2O). This identification is primarily based on the similarity between its pXRD pattern and the reference XRD pattern of sklodowskite. Furthermore, the measured infrared and Raman spectra show the vibrational modes of UO2 2+ and SiO4 4- ions, particularly within the 700~1,100 cm-1 region, which support that the synthetic mineral has a characteristic layered uranyl-silicate structure of crystalline sklodowskite. Finally, we utilized synthetic minerals to estimate its solubility up to about three months in a model groundwater, where the dissolved species composition is analogous to that of granitic groundwater from the KAERI Underground Research Tunnel. In this presentation, we will present in detail the results of spectroscopic characterizations and the methodology employed to assess the solubility of the U(VI)-silicate solid phase.

The high-level nuclear waste (HLW) repository disposes of high-level nuclear waste at a depth of 500 m to 1,000 m underground. Structural health monitoring must be accompanied by the complex environmental conditions of high temperature, high humidity, radiation, and mechanical stress. A thermocouple for measuring temperature, total stress meter and pore pressure meter for measuring stress and water pressure, relative hygrometer and electrical resistivity sensor (TDR or SUS) for measuring humidity, accelerometer for measuring crack signals, and strain gauge for measuring displacement are used. For safety, after disposing of HLW in the HLW repository, access to the disposal tunnel gets blocked, making it impossible to replace or remove the monitoring sensors. So, it is necessary to evaluate the effect of the HLW repository’s environmental conditions on the monitoring sensors and enhance their durability through quantitative life evaluation and shielding. Before evaluating the life of accelerometers and strain gauges used in the HLW repository, an experimental study is conducted to determine failure modes and failure mechanisms under radiation conditions, which are unique environmental conditions of the HLW repository.

The seven-year research project entitled “Development of workflow for integrated 3D geological site descriptive modeling” is being carried out from 2023. This research is funded by Ministry of Trade, Industry, and Energy (MOTIE). Progress of the research is discussed here. The integrated 3D geological SDM (site descriptive model; GSDM hereafter) consists of three part; 1) three dimensional representation of geologic elements, 2) database for material properties and modeling results from SDMs of other disciplines (e.g., rock mechanics), and 3) a visualization tool for geology, material properties and modeling results. The GSDM is comparable to the GDSMs of SKB and POSIVA in its representation of geology by volume of geologic elements. However, our GSDM is different in that extra information of material properties and an extra tool for visualization is included in the GDSM. The rationale for incorporating material properties and a visualization tool into the GSDM is to expedite the development of the GSDM and SDMs of other disciplines by allowing single institution to integrate database and visualization with the GSDM. SKUA-GOCAD is used for representation of geologic surfaces for ductile and brittle shear zones, and also for surfaces for delineation of volumes of rock units. We have adopted SKUAGOCAD because the program offers powerful functions of interpolation including borehole data and geophysical prospecting. So far, we have tested the program for five different geologies, including sedimentary, high-grade metamorphic, and intrusive igneous geology. The test results are promising. Incorporation of data and modeling results for the SDMs of other disciplines is at conceptual stage. The working conceptual model involves the following steps, 1) to provide the modeler of other disciplines with surface information representing geologic elements, 2) the modeler returns not only material properties but the results of numerical analysis, and 3) incorporation of material properties and modeling results into database. Since the numerical codes in other disciplines adopt different types of formats for 3D geology, we plan to adopt the widely used FEM format prepared by Gmsh. The visualization tool will also adopt Gmsh for graphical representation of 3D geology as well as database for material properties and modeling results. When the working model of GSDM becomes available, rapid and significant progress is expected in the SDMs of other disciplines and related areas, for example, geotechnical investigation for deep geological repository.

In the nuclear environment, sensors ensure safety, monitoring, and operational efficiency under various operating conditions. These sensors come in various forms, each tailored to specific purposes, including nuclear safety and security, waste treatment and storage, gas leak detection, temperature and humidity monitoring, and corrosion detection. Ensuring the longevity of sensors without the need for frequent replacements is a vital goal for researchers in this field. This paper explores materials that can act as shields to protect sensors from harsh environmental conditions (high radiation and temperatures) to enhance their lifetime. The types of material that had been explored were divided into categories: metal and non-metal. Fourteen types of metal and seven different plastic materials were studied and focused on their characteristics and current applications. Considering properties like melting point, intensity, and conductivity, plastic materials are chosen to be examined as sensor shielding material. A preliminary experiment was conducted to verify signal characteristics changes by shielding material. Metal material and plastic material each were placed in the middle of the granite and the target sensor. The result showed that when metal is between the granite and the sensor, the density and impedance are higher in granite than in the metal. This leads to signal attenuation and a shift in resonance frequency, while plastic does not. Therefore, PPS (Polyphenylene sulfide) and PAI (Polyamide-imide) have lower density and impedance than granite while also possessing heat, moisture, and radiation resistance for effective shielding.