목적: 본 연구의 목적은 여러 산업의 선행연구들을 통하여 고객에게 제공되는 관계효익의 개념을 경제적 효익, 고객화효익, 사회적효익, 심리적효익으로 구분하여 전환장벽과 재구매의도에 미치는 영향에 대하여 확인하고자 하였다. 방법: 본 연구는 안경원에서 안경테, 안경렌즈, 콘택트렌즈를 구입하였던 347명의 고객을 대상으로 설문 조사하고 그 데이터를 분석하였다. 데이터 분석은 SPSS 18.0 통계프로그램을 이용하여 빈도분석, 요인분석, 회귀분석을 실시하여 안경원의 관계효익과 전환장벽, 재구매의도에 관한 연구 가설을 검증하였다. 결과: 첫째, 관계효익 중 심리적효익과 고객화효익이 전환장벽 형성에 긍정적인 영향을 미쳤다. 둘째, 관 계효익 중 세 요인, 즉 심리적효익, 경제적효익, 고객화효익이 재구매의도에 긍정적인 영향을 미치는 것으로 나타났다. 셋째, 전환장벽이 재구매의도에 긍정적인 영향을 미치는 것으로 나타났다. 결론: 본 연구에서는 안경원의 관계효익 중에서 심리적효익이 전환장벽과 재구매의도에 중요한 역할을 하 는 것과 관계효익의 네 요인 중 고객화효익이 전환장벽 형성과 재구매의도에 영향을 주는 것을 발견하였다. 경제적효익은 재구매의도 형성에만 영향을 미치므로 안경원 경영자는 안경사의 장기 근무를 위한 노력과 재 교육을 제공하여 고객관계관리를 통한 전환장벽 형성과 재구매의도를 높이려는 노력을 기울여야 할 것이다.

In this work, we studied the effects of electrochemical oxidation treatments of carbon fibers (CFs) on interfacial adhesion between CF and epoxy resin with various current densities. The surface morphologies and properties of the CFs before and after electrochemical-oxidation-treatment were characterized using field emission scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and single-fiber contact angle. The mechanical interfacial shear strength of the CFs/epoxy matrix composites was investigated by using a micro-bond method. From the results, electrochemical oxidation treatment introduced oxygen functional groups and increased roughness on the fiber surface. The mechanical interfacial adhesion strength also showed higher values than that of an untreated CF-reinforced composite.

Subcutaneous emphysema is a rare but serious side effect of dental and oral surgery procedures. The condition is characterized by air being forced underneath the tissue, leading to swelling, crepitus on palpation, and with potential to spread along the fascial planes to the periorbital, mediastinal, pericardial, and/or thoracic spaces. A wide range of causes have been documented for the origin of subcutaneous emphysema during dental treatment including: crown preparations, other operative procedures, endodontic therapy, extractions, as well as oral surgery procedures. The patient was a 58-year-old woman who presented to the Seoul Saint mary’s hospital emergency department with a chief complaint of facial edema, dyspnea and chest discomfort after periodontal treatment using an air-flow equipment in local dental clinic. During treatment in the emergency department, oxygen therapy and intravenous injection of steroid and anti-histamine was done. it was noted that the patient had pain and swelling on left lower molar region, pus discharging on same site. Severe edema was observed on periorbital region to neck with heatness. An audible crepitus sound was heard during palpation on facial area. Neck CT scan and antibiotic therapy was done, as symptom suggesting dental abscess is observed. 3 hours after injection of antibiotics, the patient’s symptom was relieved, but she felt chest discomfort continuously. CT scan with constrast depicted confluent and extensive soft tissue emphysematous changes involving face and deep neck spaces and pneumomediastinum. The patient was refered to thoracic surgery department, oxygen therapy was decided continuously. After 10 hours, patient’s chief complaint was resolved, and discharged. After 1 week, all symptom was disappear and follow-up neck CT scan finding was disappearance of edema and pnuemomediastinum. We report a case of cervical subcutaneous emphysema and pneumomediastinum occurring after periodontal treatment using an air-flow equipment and case on the diagnosis and treatment of subcutaneous emphysema and pneumomediastinum, along with a review of the literature.

The purpose of this study was to investigate the relationship the quality of life, osteoarthritis and osteoporosis in the Republic of Korea. This study was utilized raw data from the 2010 KCHS. In total, 229,229 individuals participated in the 2010 survey. The final analysis was identified 22,545 individuals who had been diagnosed by a doctor with arthritis or osteoporosis. To identify the relationship between the quality of life - related after treated or treating of arthritis, osteoporosis, A multiple linear regression analysis was performed. Treating group for osteoarthritis of their quality of life has statistically been less than after treated group(B=-.068, p<.001). Treating group for osteoporosis of their quality of life has statistically been less than after treated group(B=-.083, p<.001). Non-treatment group who was diagnosed by doctor, but no treated subject for osteoarthritis of their quality of life has statistically been less than after treated group(B=-.075, p<.001). Non-treatment group that was diagnosed by doctor, but no treated subject for osteoporosis of their quality of life has statistically been less than after treated group(B=-.045, p<.001). Non-treatment group who was diagnosed by doctor, but no treated subject for osteoporosis and arthritis of their quality of life has statistically been less than after treated group(B=-.0121, p<.001). as a result of those data, we understand that the decision maker for treatment has been chosen by quality of life, including pain, mobility activity and so on.

Beauveria bassiana is one of universal insect pathogenic fungi that have been used for biocontrol agent against insect pests. This fungus has also been studied for medicinal use. To meet for commercial use, the artificial production of the fruit body of this fungus has been established by the Mushtech Co in Korea. This study was carried out to define the morphological features of the fruit body of B. bassiana developed through artificial cultivation. For the observation of mycelia growth, B. bassiana was cultured on the Sabouraud Dextrose agar plus Yeast Extract(SDAY), nut-supplemented medium, and Fe ion-supplemented SDAY at 25℃ for 15 days. The variation of colony color was observed between the different media. Strong pigmentation was observed on Fe ion-supplemented SDAY. To investigate morphological characteristics of fruit body, geminating ascospores and vegetative hyphae were observed though light microscopy and scanning microscope. During seven weeks of cultivation period, the development process of apical fertile part of stromata can be separated by the development stage of perithecia. To understand the developing process of fruit body at the transcript level, investigating process of distinct gene expression according to cultural condition and developmental stage was discussed.

To understand the oviposition biology of arrowhead scale, Unaspis yanonensis (Kuwana) (Homoptera: Diaspididae), the longevity and fecundity of the overwintered females were examined at various temperatures (16, 20, 24, 28, and 32℃). The total fecundity increased with rising temperature, showed a maximum of 260.9 crawlers per female at 24℃, and then declined thereafter. Females showed a periodical oviposition activity. The 1st cycle fecundity was identified at all temperatures examined, and was not significantly different between 16 and 28℃. However, the 2nd cycle fecundity and later cycle fecundity were much lower at 16, 20, and 32℃ than those at 24 and 28℃. The pre-oviposition period ranged from 49.0 d at 16℃ to 19.7 d at 32℃, and was the shortest 19.4d at 28℃. The linear lines of mean development rates (1/mean pre-oviposition period) against temperatures provided the estimate of low-threshold temperature 8.7℃ for pre-oviposition stage and the thermal constant of 358.1 DD. The lower threshold temperature and thermal constant for the completion of U. yanonensis pre-oviposition period well predicted the first crawler occurrences in the fields.

Multi-elements doped TiO2 was prepared as a new photocatalyst in order to decrease the band gap of TiO2 by sol-gel process which can provide the large active sites of TiO2. Multi-elements were doped by using a single precursor, tetraethylammonium tetrafluoroborate (TEATFB). By the benefit of large specific surface area of TiO2 prepared by sol-gel process, catalysts showed initial fast removal of dye. The photoactivity showed that the doped catalysts significantly promote the light reactivity than undoped TiO2. The commendable photoactivity of prepared catalysts is predominantly attributable to the doping of anions which may reduce the band gap.

A nanocomposite consisting of Fe3O4 and MWCNT was produced via sol-gel technique using FeCl3 along with MWCNT by calcination at 300℃. The degradation effect of rhodamine B dye has been investigated under UV illumination in a darkroom. The degradation reaction was studied by monitoring the discoloration of dye as a function of irradiation time using UV-visible spectrophotometeric technique. The Fe3O4-MWCNT samples have continuous degradation ability under the UV illumination with the first order kinetics and the dye removal was better than in the pristine Fe3O4. The resultant composite catalyst was found to be efficient for the photo-Fenton reaction of the dye.

In order to investigate the effect of doping C, N, B and F elements on TiO2 for reducing the band gap, the heat treatment of TiO2 was carried out with tetraethylammonium tetrafluoroborate. Through XRD and XPS analysis, the C, N, B and F doped anatase TiO2 was confirmed. According to the increase of temperature during treatment, the particle size was increased due to aggregation of TiO2 with elements (B, C, N and F). To investigate the capacity of photocatalyst for degradation of dye under solar light, the degradation of acridine orange and methylene blue was conducted. The degradation of dyes was carried out successfully under solar light indicating the effect of doping elements (B, C, N and F) on TiO2 for reducing the band gap effectively.

Purpose: The purpose of this study examines the mediating effect of clan leadership in the relationship between hierarchy culture and organizational commitment. Most previous research focused on the relationship between organizational culture and organizational performance or organizational culture and job satisfaction. There are few empirical studies that focus on organizational commitment data because it is difficult to collect in many cases of export-driven small and medium sized enterprises. However, this research measures affective commitment, continuance commitment, and normative commitment differently than previous research, which is mostly focused on the hierarchy culture, clan leadership, and organizational commitment measurements. Research design, data, methodology: Conceptual research model is based on the studies of Cameron and Quinn (2011), and Gungor and Sahin (2018). The model is designed with three constructs such as hierarchy culture, organizational commitment, and clan leadership. The monitor culture and coordinator culture are as proxy for the hierarchy culture. The affective commitment, continuance commitment, and normative commitment are as proxy for the organizational commitment. And also the facilitator leadership and mentor leadership are as proxy for the clan leadership. Based on three hundred cases such as export-driven small and medium sized enterprises (SMEs), this study verify the hypothesis. Hypothesis was analyzed with the structural equation modeling. Results: In case of export-driven small and medium sized enterprises (SMEs), clan leadership acts as a mediator in the relationship between hierarchy culture and organizational commitment. In case of export-driven small and medium sized enterprises (SMEs) with high organizational commitment, clan leadership acts as a mediator in the relationship between hierarchy culture and organizational commitment. In case of export-driven small and medium sized enterprises (SMEs) with low organizational commitment, clan leadership did not act as a mediator in the relationship between hierarchy culture and organizational commitment. Conclusions: By controlling for the mediating effect of clan culture, this study have improved the academic contributions as well as policy and practical implications through empirical study of clan leadership that affect organizational commitment in the fields of hierarchy culture. In addition, this study means that the mediating effects on the variables of clan leadership were examined.

본 연구는 인터넷 개인방송의 이용동기와 수용자특성(초기수용자, 후기수용자)에 따른 만족도의차이를 분석하였다. 이를 위해 아프리카TV(AfreecaTV)를 이용하는 10~30대 283명을 대상으로 설문을 실시하였으며, 다음과 같은 결과를 도출하였다. 분석결과 사용자의 하루 평균 사용시간은 이용동기에 긍정적인 영향을 미쳤으며, 수용자특성에 따른 인구통계학적 특성차이에서는 학력에서만 차이가 있는 것으로 나타났다. 또한 만족도는 초기수용자의 경우 여가습관, 커뮤니케이션, 오락성, 접근성이 후기수용자는 접근성, 신뢰성, 여가습관, 최신성이 유의미한 요인으로 나타났다.

Background : This study was conducted to determine the optimal conditions of growth medium, temperature, and light quality for efficient propagation of Pyrrosia petiolosa spores. Methods and Results : P. petiolosa spores were collected from Andong-si area in February 2015, and the spores were subjected to a careful selection process. The selected spores were stored at the Korea National Wild Plant Seed Bank (4℃, RH 40%) and used as our experimental materials (GR0000182302). The spore germination rate and prothalium development were high in Knop media (24.5%), which had low mineral content. The germination rate increased with the increase in temperature and reached its maximum, 24.5%, at 25°C. The germination rate was also measured under different light conditions, and the highest rate of 28.7% was observed under LED blue light compared to fluorescent lights (24.5%). The germinated spores developed into heart-shaped prothallia under LED blue light; however, 3 weeks after sowing, prothallium development decreased compared to fluorescent lights. Conclusion : In conclusion, the optimal P. petiolosa In vitro propagation method include spore germination on Knop medium at 25°C under LED blue light, and the change in light source to fluorescent light 3 weeks after sowing for prothallium formation and proliferation.