Chrysanthemums (Dendranthema grandiflorum ‘Iwanohakusen’) were grown in a greenhouse with complete nutrient solution system to investigate the effect of silicon (Si) supplement on salt induced deleterious effects in chrysanthemum plants. The experiment was conducted in plastic pots supplemented with a mixture of upland soil : leaf mold : river sand (3:3:4, v:v:v). Si and salinity were treated in combination with two levels of NaCl (0 and 100 mM) and two sources of silicon (K2SiO3, KSi and silicate fertilizer, SiF) at the same concentration (1.8 mM Si) by weekly-drenching for 12 weeks. Chrysanthemum plants supplemented with Si increased in fresh and dry matter enhancing water content and salinity tolerance. The plants grown under salt stress produced less fresh and dry matter than control plant. However, Si supplement to plants under salt stress ameliorated negative effects of salt stress. In soil, EC and NaCl increased by salt stress were mitigated by Si supplement. Salt stress significantly decreased the contents of K and P in leaf, but Si supplement under salt stress significantly recovered the decreased contents with enormous desorption of K and P in soil. Added Si significantly increased content of available SiO2 with its adsorption by salt stress in soil, which was directly related to Si accumulation in leaf. However, Si uptake by roots was suppressed by salt stress irrespective of Si supplement. Si supplement did not ameliorated the negative effects of salt stress on chlorophyll content and membrane integrity in leaf of chrysanthemum plant although significantly increased Si content in leaf, but reversed pest (Liriomyza trifolii) resistance to above-control level.

A powder injection molding process is developed and optimized for piezoelectric PAN-PZT ceramics. Torque rheometer experiments are conducted to determine the optimal solids loading, and the rheological property of the feedstock is evaluated using a capillary rheometer. Appropriate debinding conditions are chosen using a thermal gravity analyzer, and the debound specimens are sintered using sintering conditions determined in a preliminary investigation. Piezoelectric performance measures, including the piezoelectric charge constant and dielectric constant, are measured to verify the developed process. The average values of the measured piezoelectric charge constant and dielectric constant are 455 pC/N and 1904, respectively. Powder injection molded piezoelectric ceramics produced by the optimized process show adequate piezoelectric performance compared to press-sintered piezoelectric ceramics.

Osmia cornifrons is a cavity-nesting solitary species used as an apple pollinator in Korea. To elucidate the developmental characteristics of O. cornifrons, we investigated its development from the egg to adulthood, including a dormant prepupal phase and mating through indoor rearing (25 °C, 65% R.H.). The egg durations of the female and male bees were 3.6 ± 0.8 days and 3.1 ± 1.3 days, respectively. During larval development, the head widths of the 1st to 5th instars ranged from 0.7 ± 0.1 mm to 1.3 ± 0.1 mm. The peak of the growth in head width was the 2nd instar. The larval lengths ranged from 3.7 ± 0.6 mm to 13.6 ± 1.3 mm. The peak of growth was the 4th instar. The larval weights ranged from 4.5 ± 1.2 mg to 78.3 ± 16.1 mg. The peak of growth was the 3rd instars. The total larval durations of from the 1st to 5th instars for the females and males were 14.0 ± 6.0 days and 13.2 ± 5.8 days, respectively. The spinning durations of the females and males were 2.2 ± 0.7 days and 2.3 ± 0.8 days, the prepupation durations were 55.5 ± 5.9 days and 55.8 ± 2.9 days, and the pupation durations were 26.4 ± 2.1 days and 25.3 ± 2.3 days, respectively. The average longevity of the female adults and male adults was 21.8 ± 8.7 days and 24.4 ± 12.4 days, respectively. The total duration of from the egg to an adult bee of the O. cornifrons females and males was 123.5 days and 124.1 days, respectively. Mating consisted of the three following phases: the precopulatory (courtship and attempting copulation), copulation and postcopulatory phases. The mating times of the precopulatory, copulation and postcopulatory phases were 159.6 ± 288.9, 8.4 ± 7.1, 12.9 ± 4.5, and 198.8 ± 69.8 seconds.

Serine protease inhibitors play a critical role in physiological processes and immune responses by regulating serine protease activities. Here we describe the molecular cloning and antimicrobial activities of a serine protease inhibitor from the mason bee, Osmia cornifrons (OcSPI). OcSPI consists of 405 amino acid residues and contains a potential reactive center loop (RCL) region in its C-terminus. Recombinant OcSPI was produced as a 64-kDa glycoprotein in baculovirus-infected insect cells and exhibited inhibitory activity against chymotrypsin. Additionally, OcSPI demonstrated inhibitory activity against microbial serine proteases, such as subtilisin A and proteinase K, but not against tissue plasminogen activator, thrombin, or plasmin. Recombinant OcSPI bound directly to Escherichia coli, Bacillus subtilis, and Beauveria bassiana and exhibited antimicrobial activity against both bacteria and fungi. Our results demonstrated the antimicrobial functions of OcSPI and suggest a role for OcSPI in the immune response of O. cornifrons.

The two spotted mite, Tetranychus urticae Koch, is a global pest, and has developed severe resistance to several types of acaricides. This study compared the development in susceptible (S) and acequinocyl, bifenazate, pyridaben, abamectin and etoxazole-resistant (AcR, BR, PR, AbR and ER) strains of T. urticae by X-ray irradiation. When eggs were irradiated with 100 Gy, the egg hatching was completely inhibited in all strains. When nymphs were irradiated with 200 Gy, their hatching was completely inhibited in all strains. When adults were irradiated, the fecundity and egg hatching was decreased at 150 Gy and above, and hatchability of F1 generation was completely inhibited at 300 Gy in all strains. Adult longevity was slightly increase at 150 Gy and above. In addition, we performed quantitative real-time PCR on several genes. To examine the difference of all strains on radiation stress-induced gene expression, we performed quantitative RT-PCR (qPCR) of several known stress-induced genes.

In Korea, six mealybug species have been reported on pears. This study investigated the occurrence of mealybugs in 19 pear orchards from 2013 to 2014. Two species, Crisicoccus matsumotoi (Siraiwa) (Hemiptera: Pseudococcidae) and Pseudococcus comstocki (Kuwana) were mainly found. The dominant species was C. matsumotoi identified on 73% of infested fruit. Toxicities of 14 registered insecticides (7 single formulations and 7 mixed formulations) commonly used to control P. comstocki were evaluated to C. matsumotoi nymphs and adults at the recommended concentration. As a results, all insecticides exhibited strong insecticidal activity with 100% mortality of both nymphs and adults. These results indicate that the 14 insecticides can be used in control for C. matsumotoi in field.

Mealybugs (Hemiptera: Pseudococcidae) are major pests of a wide range of crops and ornamental plants worldwide, and represented by 56 species in Korea. Occurrence of, or damage by, the longtailed mealybug, Pseudococcus longispinus Targioni-Tozzetti has not been reported since 2002. However, for the first time in many years, P. longispinus was reported at Phalaenopsis orchids by Kim et al in 2015. Therefore, the present study aimed to investigate the distribution of P. longispinus which is usually found inside a greenhouse or a building where the host plants are. We have collected 129 mealybug samples at 254 sites from Korea. Among these, 27 of P. longispinus and 62 of an unidentified Pseudococcus species were found mainly in ornamental plants such as Heteropanax fragrans, commonly known as happy trees in Korea. Morphological characteristics of the unidentified mealybug were very similar to those of P. longispinus. However, the genetic variability in COI sequence comparison was significantly different between the two species. Further studies are needed to clarify the valid name for this unidentified species, and we are currently working on it.

Oxalic acid has a nematicidal activity against the root-knot nematode Meloidogyne incognita. High producer of oxalic acid was isolated, and then named as Aspergillus niger F22. Oxalic acid production was investigated under various temperatures from 20 – 33oC and rotational speeds in 5 L jar fermenters. Yield of oxalic acid increased with decreasing temperature. The highest yield was obtained at 23oC, showing the yield of oxalic acid of 8.7 g/L, whereas oxalic acid production was least at 33oC. At 20oC, the yield was lower than that of 23oC. At a rotational speed of 300 rpm, serious oxygen depletion was present from 48 - 72 h, resulting in low productivity of 26.2 mg /L·h. When a rotational speed was set at 600 rpm, dissolved oxygen tension was over 40% and oxalic acid production increased up to approximately 55%. Viscosity during the culture differed with temperatures. Viscosity increased with the increment of temperatures. When A. niger F22 was cultured at 23oC, viscosity was 810 cP, which was favorable for oxalic acid production.

As ubiquitous organisms entomopathogenic fungi may natually occur within environment including phylloplanes and soil or deposite and survive for a while after spraying a fungal suspension to control insect pest. The existence of pathogenic fungi is a threat to arthropods foraging for food and oviposition sites. The detection and avoidance of pathogens is important for host survival, longevity and ultimate fitness. Although entomopathogenic fungi are ubiquitous worldwide and act as common natural enemies of many invertebrate species, very few studies have conducted abiut the detection and avoidance of pathogenic fungi by insect pest. We have studied that an insect pest can recognize a high virulence fungi on crop surface, avoid oviposition and don’t enter the field treated their pathogen.

In this study, a genus Bruandella Tutt with B. niphonica (Hori, 1926) is reported for the first time from Korea. This study is aimed to report a newly recorded genus and species. All available information for the species including the distributional ranges and host plants were presented in this study. Also the larval characteristics and DNA barcode analysis for the species are provided.

A novel insect-infecting positive sense single-stranded RNA virus, Riptortus pedestris virus-1 (RiPV-1), was found in the Riptortus pedestris transcriptome data by de novo assembly and further confirmed by RACE method. The genome of RiPV-1 consists of 10,554 nucleotides (nt) excluding the poly(A) tail and contains a single large open reading frame (ORF) of 10,371 nt encoding a 3,456 aa polyprotein and flanked by 71 and 112 nt 5' and 3' noncoding regions, respectively. RiPV-1 genome contains the consensus genome organization of picorna-like RNA helicase, cysteine protease, and RNA-dependent RNA polymerase (RdRp) array in that order from the 5' to the 3' end. From the phylogenetic analysis, RiPV-1 was clustered with unassigned insect RNA viruses, APV and KFV, which suggests that these three insect picorna-like viruses might constitute a novel group of insect-infecting RNA viruses. Tissue tropism analysis revealed that RiPV-1 was relatively abundant in the thorax, abdomen, midgut and fat body. Interestingly, RiPV-1 replication was enhanced by Beauveria bassiana JEF-007 infection that was quantified using qRT-PCR. This study identified a novel insect-infecting virus and provided further insight into the relationship between virus, fungus and host.

Beauveria bassiana (Bb) is an entomopathogenic fungus with a wide host range, and is commonly used as an environment-friendly biopesticide. However, the molecular mechanisms of Bb-host interactions are not well understood. Here, RNA isolated from a highly virulent strain of B. bassiana (Bb JEF-007) and Riptortus pedestris (Hemiptera: Alydidae) (bean bug) infected with this strain were subjected to high throughput next generation sequencing (NGS) to analyze and compare transcriptomes. Differentially expressed gene (DEG) analysis showed that 2,381 genes were up-regulated and 2,303 genes were down-regulated upon infection. Most DEGs were classified into the categories of single-organism, cellular and metabolism processes by gene ontology (GO) analysis. Carbon metabolism-related enzymes in the glyoxylate cycle were significantly up-regulated, suggesting a possible role for them in Bb growth in the host. This work provides insight into how entomopathogenic B. bassiana occupies agriculturally harmful bean bug at the late stage, which might be essential during fungal infection.

Although expression of foreign genes in a crop species has been target techniques for powerful protection against insect pests, classical breeding programs using varietal resistance of a crop are still being processed. It is, however, frequently difficult to find key products expressed from resistance-related genes in the variety, and those action mechanism. Here, an unterminated story about seed of a mungbean (Vigna radiata) variety with high resistance against the adzuki bean weevil and the bean bug is introduced. The two insects cannot survive on seeds of the variety, although they well develop on susceptible ones. Molecular markers linked to the resistance were selected through BAC library screening and near isogenic lines, and finally a bruchid resistance gene was suggested after map-based cloning approaches. Starvation and chemicals were suggested for a resistant mechanism and a related factor through feeding and behavior experiments, respectively. The seed flour was extracted with organic solvents, and isolated into several fractions on chromatography. Several peaks on HPLC in a fraction were related with the high mortality of the bean bug. A partial structure in an isolated chemical was observed before full identification.

Biological control has been tried for integrated pest management. It is often comparable, safe, and environment-friendly, making itself an alternative for chemical agents. Filamentous microorganisms, i.e., fungi and streptomystes, produce many kinds of useful metabolites, and some of them have been developed as a biocontrol agent. However, they still have a long way because of the concern of manufacturing cost. Therefore, process development was intensively studied to meet cost-effectiveness. Operating conditions of bioreactor, e.g., agitation and aeration, had an effect on biological and physiological responses such as mycelial morphology, oxygen and nutrient transfer. Understanding relationship between operating parameters and microbial responses in terms of growth, substrate and oxygen consumption, and production yield was critical for process development. This study dedicated to build strategies for mass production of biological control agent using aerobic filamentous microorganisms.

Nanosized zeolites were prepared in an autoclave using tetraethoxysilane (TEOS), tetrapropylammonium hydroxide (TPAOH), and H2O, at various hydrothermal synthesis temperatures. Using transmission electron microscopy and particle size analysis, the nanopowder particulate sizes were revealed to be 10-300 nm. X-ray diffraction analysis confirmed that the synthesized nanopowder was silicalite-1 zeolite. Using atomic layer deposition, the fabricated zeolite nanopowder particles were coated with nanoscale TiO2 films. The TiO2 films were prepared at 300 oC by using Ti[N(CH3)2]4 and H2O as precursor and reactant gas, respectively. In the TEM analysis, the growth rate was ~0.7 Å/cycle. Zeta potential and sedimentation test results indicated that, owing to the electrostatic repulsion between TiO2-coated layers on the surface of the zeolite nanoparticles, the dispersibility of the coated nanoparticles was higher than that of the uncoated nanoparticles. In addition, the effect of the coated nanoparticles on the photodecomposition was studied for the irradiation time of 240 min; the concentration of methylene blue was found to decrease to 48%.

One hundred seventy two accessions of safflower, collected in four countries were investigated for their morphological and biochemical characters in 2014. The accessions were categorized into two groups; South-Central (S-C) Asia and South-West (S-W) Asia, and each group was represented the accessions of two countries. Variation in morphological and biochemical characters was observed between two groups of accessions. The average value of seed weight and range of variability were higher in S-C Asia accessions while S-W accessions exhibited the variation in plant height, leaf length and days to flowering. The average value of oleic and total oil content were higher in S-C Asia accessions, and the values were 19.8%, and 231.4 mg.g-1, respectively, while the range of variability for total oil content was higher in S-W accessions. Plant height exhibited a significant positive correlation with days to flowering (r = 0.625**). Palmitic acid had positively correlated with stearic acid (r = 0.282**) and linoleic acid (r = 0.444**). Oleic and linoleic acid showed a strong negative correlation (r = -0.977**). The first three principal components explained 57% of the total variation. Morphological and biochemical variation exist in different groups of accessions could be useful to breeder for developing new safflower cultivars with high oil quantity and quality.

Powder injection molding (PIM), which combines the advantages of powder metallurgy and plastic injection molding technologies, has become one of the most efficient methods for the net-shape production of both metal and ceramic components. In this work, plasma display panel glass bodies are prepared by the PIM process. After sintering, the hot isostatic pressing (HIP) process is adopted for improving the density and mechanical properties of the PIMed glass bodies. The mechanical and thermal behaviors of the prepared specimens are analyzed through bending tests and dilatometric analysis, respectively. After HIPing, the flexural strength of the prepared glass body reaches up to 92.17 MPa, which is 1.273 and 2.178 times that of the fused glass body and PIMed bodies, respectively. Moreover, a thermal expansion coefficient of 7.816 × 10−6/oC is obtained, which coincides with that of the raw glass powder (7.5-8.0 × 10−6/oC), indicating that the glass body is fully densified after the HIP process.

촉진수송은 기존의 고분자 막에서는 힘든, 투과도와 선택도를 동시에 향상시킬 수 있는 기술 중 한 가지이다. 촉진 수송 분리막을 이용한 올레핀/파라핀 분리는 기존의 증류공정을 대체할 수 있는 기술로써 많은 관심을 받아왔다. 본 연구에서 는 테트라플루오로붕산은/질산알루미늄의 혼합염이 포함된 고분자 블렌드 기반의 촉진수송 올레핀 분리막을 제조하였다. 자유 라디칼중합법을 이용하여 폴리다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체를 합성하였다. 또한, 폴리 다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 매질에 폴리에틸렌옥사이드를 다양한 비율로 혼합하였다. 폴리에틸렌옥사 이드를 폴리다이메틸실록세인-g-폴리옥시에틸렌 메타크릴레이트 가지형 공중합체 질량 대비 70%를 혼합하였을 때, 혼합기체 선택도 및 투과도는 5.6 및 10.05 GPU에 도달하였다. 이와 같은 복합막의 올레핀 분리 성능이 향상된 이유는, 분리막에 첨가 된 은이온이 올레핀 기체분자의 선택적인 촉진 수송을 하였고, 또한 고투과성의 고분자 블렌드가 사용되었기 때문이다. 또한 은이온의 은나노입자로의 환원을 억제시키는 질산알루미늄의 첨가로 인해 복합막의 장시간 안정도를 향상시킬 수 있었다.