Voltinism could be used as an index assessing the global warming effects on insect phenology. In many cases, however, the voltinism could not be defined explicitly as a numerical scale especially when it should be calculated over the various climatic conditions. In addition, calculation of insect voltinism is much difficult when only a small portion of its population emerge as adults in the late season. In this study, a degreeday model, a simplified phenology model and a population model for the peach fruit moth, Carposina sasakii, were used to predict their voltinism. To evaluate the model performance, we assumed a continuously host providing system. Daily maximum and minimum temperatures in Suwon in 2015, and 2℃ increase in the daily maximum and minimum temperatures were used to describe current and future climate conditions, respectively. The merits and limits for three models for evaluating insect voltinism are discussed.

Oxalic acid has a nematicidal activity against the root-knot nematode Meloidogyne incognita. High producer of oxalic acid was isolated, and then named as Aspergillus niger F22. Oxalic acid production was investigated under various temperatures from 20 – 33oC and rotational speeds in 5 L jar fermenters. Yield of oxalic acid increased with decreasing temperature. The highest yield was obtained at 23oC, showing the yield of oxalic acid of 8.7 g/L, whereas oxalic acid production was least at 33oC. At 20oC, the yield was lower than that of 23oC. At a rotational speed of 300 rpm, serious oxygen depletion was present from 48 - 72 h, resulting in low productivity of 26.2 mg /L·h. When a rotational speed was set at 600 rpm, dissolved oxygen tension was over 40% and oxalic acid production increased up to approximately 55%. Viscosity during the culture differed with temperatures. Viscosity increased with the increment of temperatures. When A. niger F22 was cultured at 23oC, viscosity was 810 cP, which was favorable for oxalic acid production.

Exportation of sweet persimmon has been grown up recently, but the growth was accumulated because of quarantine and shelf life issues. Herein, we've investigated the concurrent processing of ethyl formate (EtF), a MeBr alternative quarantine fumigant, and 1-methylcyclopropene (1-MCP), an anti-ethylene compound, on sweet persimmon and suggested proper fumigation methods. An important quarantine pest, Tetranychus urticae, was inoculated on sweet persimmon, and then 70 g m-3 of ethyl formate has been fumigated for 6 h before and after 1 ppm of 1-MCP treatment for 24 h at 5°C condition. These concurrent processing showed the promise that efficacy of EtF was enough to meet quarantine guideline and shelf life of fruits was extended in terms of the hardness, surface color and sugar contents when treated fruits were stored for four weeks at 5°C.

The acaricidal activity of Asarum heterotropoides root-derived principles, methyleugenol, safrole, 3-carene, α-asarone, pentadecane and A. heterotropoides root steam distillate constituents was tested against poultry red mites Dermanyssus gallinae (De Geer). All active principles were identified by spectroscopic analysis. Results were compared with those of two conventional acaricides, benzyl benzoate and N,N-diethyl-3-methylbenzamide (DEET). Methyleugenol (24 h LC50 = 0.57 μg/cm2) and safrole (24 h LC50 = 8.54 μg/cm2) were the most toxic compounds toward D. gallinae, followed by 3,4,5-trimethoxytoluene, 3,5-dimethoxytoluene, estragole, α-terpineol, verbenone, eucarvone, linalool, and terpinen-4-ol (LC50 = 15.65–27.88 μg/cm2). Methyleugenol was 16.7× and 11.0× more toxic than benzyl benzoate (LC50 = 9.52 μg/cm2) and DEET (LC50 = 6.28 μg/cm2), respectively; safrole was 1.1× and 0.73× more toxic. Asarum heterotropoides root-derived materials, particularly methyleugenol and safrole, merit further study as potential acaricides. Global efforts to reduce the level of highly toxic synthetic acaricides in indoor environments justify further studies on A. heterotropoides root extract and steam distillate preparations containing the active constituents described as potential contact-action fumigants for the control of mites.

In every summer, cicadas emerge and become numerically and ecologically dominant in Korean penninsula. Especially, cicada emergence is affected by the environmental factors. In order to evaluate the effect of environmental factors in cicada species, we analyzed the temporal changes in cicada exuviae based on meteorological and non-meteorological factors such as artificial light intensity and habitat characters on urban park area surrounded by residential houses. Combined multivariate analyses with a cluster analysis and a principal component analysis (PCA) were conducted. Samples were classified into 3 different cluster based on differences of meteorological factors such as temperature and humidity. Moreover, Random Forest model (RF) showed a high predictability of daily mean temperature on species peak abundance. These results provide a strong evidence that meteorological factors have significant effects on cicada emergences. Regarding the non-meteorological factors, we found no relationship in cicada emergence.

Recently, many habitat corridors have been constructed in Korea, but the effect of corridor types, i.e. overpasses and underpasses, on arthropods was poorly examined. Therefore, we compared the effect of habitat corridor types in terms of abundance, species richness, and composition of carabid beetles. As a result, 3,737 ground beetles belonging to 60 species were collected by pitfall trapping across the northwestern forest–habitat corridor–southeastern forest transects in 2015. Abundance and species richness of total carabid beetles in underpasses were significantly lower than overpasses. And species composition of underpasses corridors was significantly different compared to other habitats, such as overpasses and forests. Although more samples are needed to understand the effect of corridor types, the current underpasses may be unfriendly structures to movement of ground dwelling arthropods as well as carabid beetles.

Even though plant protections using chemical pesticides have several advantages, non-specific toxicities to other beneficial insects and humans and rapid development of tolerance and/or resistance of target pests to chemicals are major disadvantages. Recent researches suggested that using double stranded RNA (dsRNA) could be species specific and environmental friendly pest management protocols. However, efficiency of dsRNA treatments are known to be variable according to its application methods. For example, injections of dsRNAs to pests were known to be effective in all species. However, efficiencies of oral application of dsRNAs were known to be dependent on species. Thus, development of tools that could enhance the efficacy of orally treated dsRNAs are utmost important for widening usages of dsRNAs in plant protection. Recently, we found that the efficacy of oral treated dsRNAs to target pests could be enhanced by nano-technologies. I will show how applying nano-technology to dsRNAs enhance the efficiency of dsRNAs. (This work was carried out with the support of the Cooperative Research Program for Agriculture Science & Technology Development (Project title: Studies for biological characteristics of and control methods against the migratory locust, Locusta migratoria, Project No: PJ011630042016), Rural Development Administration).

Leafhopper subfamily, Typhlocybinae (Hemiptera: Auchenorrhyncha: Cicadellidae), caused direct damage by sap-sucking or indirect damage by transmission of viruses or diseases on the host plants, so typhlocybinae is one of the important pest groups in the world. Typhlocybinae distribute worldwide and a total of 471 genera and more than 4,300 species have been described. so far, 38 genera and 102 species were recorded in the Korean Peninsula. In this talk, we provide several taxonomic studies for the Korean typhlocybene fauna based on the genus-level reviews of the subfamily from the Korean Peninsula.

Biological control has been tried for integrated pest management. It is often comparable, safe, and environment-friendly, making itself an alternative for chemical agents. Filamentous microorganisms, i.e., fungi and streptomystes, produce many kinds of useful metabolites, and some of them have been developed as a biocontrol agent. However, they still have a long way because of the concern of manufacturing cost. Therefore, process development was intensively studied to meet cost-effectiveness. Operating conditions of bioreactor, e.g., agitation and aeration, had an effect on biological and physiological responses such as mycelial morphology, oxygen and nutrient transfer. Understanding relationship between operating parameters and microbial responses in terms of growth, substrate and oxygen consumption, and production yield was critical for process development. This study dedicated to build strategies for mass production of biological control agent using aerobic filamentous microorganisms.

The purpose of this systematic review is to investigate the effects of tape application on improving body conditions. The search strategy for this review included a literature search by members of the International Kinematic Academy in 12 countries between January 2014 and February 2015 using PubMed, CINAHL, Cochrane, Google Scholar, websites and national journals. The search words included“Kinesiotape, Kinesio tape, kinesiotaping, elastic taping, taping, functional taping, myofascial taping, sensomotor taping”. The review included all articles, even those published in different languages. These searches resulted in 821 publications. There are several effects of tape application were revealed such as improving blood circulation, lymphatic circulation, body range of motion, activation of mechanoreceptor and joint stability, and decreasing pain. No one negative about the positive effects of taping, however the more effort is required to find evidence of effects of tape application.

The work presented in this report was a detailed comparative study of the electrochemical response exhibited by graphite anodes in Li-ion batteries having different physical features. A comprehensive morphological and physical characterization was carried out for these graphite samples via X-ray diffraction and scanning electron microscopy. Later, the electrochemical performance was analyzed using galvanostatic charge/discharge testing and the galvanostatic intermittent titration technique for these graphite samples as negative electrode materials in battery operation. The results demonstrated that a material having a higher crystalline order exhibits enhanced electrochemical properties when evaluated in terms of rate-capability performance. All these materials were investigated at high C-rates ranging from 0.1C up to 10C. Such improved response was attributed to the crystalline morphology providing short layers, which facilitate rapid Li+ ions diffusivity and electron transport during the course of battery operation. The values obtained for the electrical conductivity of these graphite anodes support this possible explanation.

We developed a polymerase chain reaction (PCR)-based molecular method for sexing and identification using sexual dimorphism between the Zinc Finger-X and -Y (ZFX-ZFY) gene and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) for mitochondrial DNA (mtDNA) cytochrome B (CYTB) gene in meat pieces and commercial sausages from animals of different origins. Sexual dimorphism based on the presence or absence of SINE-like sequence between ZFX and ZFY genes showed distinguishable band patterns between male and female DNA samples and were easily detected by PCR analyses. Male DNA had two PCR products appearing as distinct two bands (ZFX and ZFY), and female DNA had a single band (ZFX). Molecular identification was carried out using PCR-RFLP of CYTB gene, and showed clear species classification results. The results yielded identical information on the sexes and the species of the meat samples collected from providers without any records. The analyses for DNA isolated from commercial sausage showed that pig was the major source but several sausages originated from chicken and Atlantic cod. Applying this PCR-based molecular method was useful and yielded clear sex information and identified the species of various tissue samples originating from livestock.

Background: Prone hip extension (PHE) can be performed to measure the lumbopelvic motor patterns and motions. Imbalances in lumbopelvic muscle activity and muscle weakness can result in instability including pain in lumbopelvic region. The posterior oblique sling (POS) muscles contribute to dynamic lumbopelvic stability. In addition, POS are anatomically aligned with the trapezius muscle group according to shoulder positions. Objects: This study compared the electromyography (EMG) activity of POS and pelvic compensations during PHE with and without pre-activation of lower trapezius muscle (lowT). Methods: Sixteen healthy males were recruited. PHE was performed in randomized order: PHE with and without lowT pre-activation. Surface EMG signals were recorded for biceps femoris (BF), gluteus maximus (GM) (ipsilateral), lumbar multifidus (MF) (bilateral), and the lowT (contralateral). An electromagnetic tracking motion analysis was used to measure the angle of pelvic rotation and anterior tilting. Results: The ipsilateral GM and bilateral MF EMG amplitudes were greater during PHE with lowT pre-activation compared to PHE without lowT pre-activation (p<.05). The BF amplitude during PHE without lowT pre-activation was significantly greater than that during PHE with lowT pre-activation (p<.05). The angles of pelvic rotation and anterior tilting during PHE with lowT pre-activation were significantly smaller compared to PHE without lowT pre-activation (p<.05). Conclusion: PHE with lowT pre-activation, which is aligned with the POS, showed more increased MF and GM muscular activity with smaller lumbopelvic compensations in rotation and anterior tilting compared to PHE without lowT pre-activation.

Dynamical analysis of compact groups provides important tests of models of compact group formation and evolution. By compiling 2066 redshifts from FLWO/FAST, from the literature, and from SDSS DR12 in the fields of compact groups in McConnachie et al. (2009), we construct the largest sample of compact groups with complete spectroscopic redshifts in the redshift range 0.01 < z < 0.22. This large redshift sample shows that the interloper fraction in the McConnachie et al. (2009) compact group candidates is  42%. A secure sample of 332 compact groups includes 192 groups with four or more member galaxies and 140 groups with three members. The fraction of early-type galaxies in these compact groups is 62%, higher than for the original Hickson compact groups. The velocity dispersions of early- and late-type galaxies in compact groups change little with groupcentric radius; the radii sampled are less than 100 h−1 kpc, smaller than the radii typically sampled by members of massive clusters of galaxies. The physical properties of our sample compact groups include size, number density, velocity dispersion, and local environment; these properties slightly differ from those derived for the original Hickson compact groups and for the DPOSS II compact groups. Differences result from subtle differences in the way the group candidates were originally selected. The abundance of the compact groups changes little with redshift over the range covered by this sample. The approximate constancy of the abundance for this sample is a potential constraint on the evolution of compact groups on a few Gigayear timescale.

To improve photocatalytic efficiency, graphene/Ag/TiO2 nanotube catalyst was synthesized, and its surface characteristics and photocatalytic activity investigated. For deposition of Ag nanoparticles on the TiO2 nanotubes, a polymer compound containing CH3COOAg/poly(Llactide) was utilized, and the silver particles were precipitated by reducing the silver ions during the annealing process. Graphene deposition on the Ag/TiO2 nanotubes was achieved using an electrophoretic deposition process. Based on the dye degradation results, it was determined that the photocatalytic efficiency was significantly affected by deposition of silver particles and graphene on the TiO2 catalyst. Highly efficient destruction of the dye was obtained with the new graphene/Ag/TiO2 nanotube photocatalyst. This may be attributed to a synergistic effect of the graphene and Ag nanoparticles on the TiO2 nanotubes.

This review presents current progress in the preparation methods of liquid crystalline nanocarbon materials and the liquid crystalline spinning method for producing nano-carbon fibers. In particular, we focus on the fabrication of liquid crystalline carbon nanotubes by spinning from superacids, and the continuous production of macroscopic fiber from liquid crystalline graphene oxide.

Using reverse micelle processing, ZnAl2O4 nanopowders were synthesized from a mixed precursor(consisting of Zn(NO3)2 and Al(NO3)3). The ZnAl2O4 was prepared by mixing the aqueous solution at a molar ratio of Zn : Al = 1 : 2. The average size and distribution of the synthesized powders with heat treatment at 600 oC for 2 h were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized powders increased with increasing water to surfactant molar ratio. The XRD diffraction patterns show that the phase of ZnAl2O4 was spinel(JCPDS No. 05-0669). The synthesized and calcined powders were characterized using a thermogravimetric - differential scanning calorimeter(TG-DSC), X-ray diffraction analysis (XRD), and high resolution transmission electron microscopy(HRTEM). The effects of the synthesis parameter, such as the molar ratio of water to surfactant, are discussed.

Oyster mushroom is one of mushrooms that are cultivated and consumed a lot in Korea. P. ostreatus 'Suhan(ASI2504)' is a popluar cultivar because of high quality. But it is difficult for farmers to cultivate, so an alternative cultivar of ‘Suhan’ is demanded continuously. To develop a new variety, parental strains were selected using cultivation characteristics of Pleurotus ostreatus collected home and abroad. P. ostreatus 'Gosol' was developed by the method of Di-Mon crossing between dikaryotic strain P. ostreatus 'Mongdol(ASI0633)' and monokaryotic strain derived from P. ostreatus ‘Yasan(ASI0635)' in 2014. Analysis of the genetic characteristics of the new cultivar 'Gosol' showed a different DNA profile as that of the control strain, 'Suhan’ but a similar DNA profile as those of the parental strains, ‘Yasan’ and　'Mongdol’, when RAPD(Random Amplified Polymorphic DNA) primer URP 3 was used. The optimum temperature for mycelial growth was 25°C for ‘Gosol’ and ‘Suhan’. 'Gosol' was appropriate for middle high temperature to grow, especially 13~18°C. Fruiting body production per bottle was about 124.2g. When compared to the control strain 'Suhan’, the stipe was longer and the individual weight was heavier. But the stipe and the pileus were a little thinner than those of the control strain. ‘Gosol’ was more resistant at high CO2 concentration than the control strain. This new cultivar ‘Gosol’ of Pleurotus ostreatus was characterized dark bluish gray cultivar of oyster mushroom in the color of pileus and higer yield compared to those of other cultivar ‘Suhan’. Therefore, it is suggested that this new cultivar ‘Gosol’ be substitute for ‘Suhan’ in oyster mushroom’s farms.

The aims of the current study were to assess reliability of range of motion (ROM) measurement of glenohumeral internal rotation (GIR) with a pressure biofeedback stabilization (PBS) method and to compare the reliability between manual stabilization (MS) and the PBS method. In measurement of pure glenohumeral joint motion, scapular stabilization is necessary. The MS method in GIR ROM measurement was used to restrict scapular motion by pressing the palm of the tester’s hand over the subject’s clavicle, coracoid process, and humeral head. The PBS method was devised to maintain consistent pressure for scapular stabilization during GIR ROM measurement by using a pressure biofeedback unit. GIR ROM was measured by 2 different stabilization methods in 32 subjects with GIR deficit using a smartphone clinometer application. Repeated measurements were performed in two test sessions by two testers to confirm inter- and intra-rater reliability. After tester A performed measurements in test session 1, tester B’s measurements were conducted one hour later on the same day to assess the inter-rater reliability and then tester A performed again measurements in test session 2 for confirming the intra-rater reliability. Intra-class correlation coefficient (ICC) (2,1) was applied to assess the inter-rater reliability and ICC (3,1) was applied to determine the intra-rater reliability of the two methods. In the PBS method, the intra-rater reliability was excellent (ICC=.91) and the inter-rater reliability was good (ICC=.84). The inter-rater and intra-rater reliability of the PBS method was higher than in the MS method. The PBS method could regulate manual scapular stabilization pressure in inter- and intra-rater measuring GIR ROM. Results of the current study recommend that the PBS method can provide reliable measurement data on GIR ROM.

This study compared the effects of the initial head position (i.e., a HHP versus a relaxed head position) of subjects with and without a FHP on the thickness of the deep and superficial neck flexor muscles during CCF. The study recruited 6 subjects with a FHP and 10 subjects without a FHP. The subjects performed CCF in two different head positions: a HHP, with the head aligned so that the forehead and chin formed a horizontal line, and a relaxed head position (RHP), with the head aligned in a self-selected comfortable position. During the CCF exercise, the thickness of the longus colli (LCo) and the thickness of the sternocleidomastoid (SCM) were recorded using ultrasonography. The thickness of each muscle was measured by Image J software. The statistical analysis was performed with a two-way mixed-model analysis of variance. The thickness of the SCM differed significantly (p<.05) between the subjects with and without FHP. According to a post hoc independent t-test, the change in thickness of the SCM increased significantly during CCF in the subjects with FHP while adopting a HHP compared to that in the subjects without FHP. The change in thickness of the SCM was not significantly different between the two positions in subjects without FHP, and there was no significant change in thickness of the LCo muscle during the CCF exercise according to the initial position in both subjects with and without FHP. The results suggest that CCF should be performed in RHP to minimize contraction of the SCM in subjects with a FHP.