Plasma Arc Melter (MSO) system has been developed for the treatment and the stabilization of various kinds of hazardous and radioactive waste into the readily disposable solidification products. Molten salt oxidation system has been developed for the for the treatment of halogen- and sulfurbearing hazardous and radioactive waste without emissions of PCDD/Fs and acid gases. However, PAM system has showed some difficulty in the off-gas treatment system due to the volatilization of radionuclides and toxic metals at extremely high-temperature plasma arc melter and the emissions of acid gases. MSO system has also showed the difficulty in the treatment of spent molten salt into the disposable waste form. Present study discussed the results of organics destruction performance tests for the PAM-MSO combination system, which is proposed and developed to compensate the drawbacks of each system. The worst-case condition tests for the organics destruction were conducted at lowest temperatures and the worst-case condition tests for the retention of metals and radionuclides were conducted at highested temperatures under the range of normal operating condition. For the worst-case organic destruction test, C6H5Cl was selected as a POHCs (Principal Organic Hazardous Constituents) because of its high incinerability ranking and the property of generation of chlorine gases and PCDD/Fs when incompletely destroyed. Simulated concrete waste spiked with 1 L of C6H5Cl was treated and the emissions of 17 kinds of PCDD/Fs and other hazardous gases such as CO, THCs, NOx, SO2 and HCl/Cl2 were measured. For the worst-case condition tests for the retention of metals and radionuclides, Pb and Cs were selected because of its high volatility characteristics. The emissions of PCDD/Fs was extremely lowered than the emission limit and those of other hazardous constituents were below their emission limit. The results of performance tests on the organics destruction suggested that tested PAM-MSO combination system could readily treat PCBs-bearing spent insulation liquid, spent ion-exchange resins used for the treatment of spent decontamination liquid in the decommission process and the concreted debris bearing hazardous organic coating materials. The decontamination factor of Cs and Co were 1.4×105, 1.4×105, respectively. The emisison of Pb was 0.562 ppm. These results suggested that tested PAM-MSO system treated low-level radioactive and pb-bearing mixed waste.

Present study investigated the waste form integrity of melted products generated from PAM-MSO system, which is proposed and developed to compensate the drawbacks of each system. The disposal suitability of the melting solidification products generated from the plasma arc melting treatment of pulverized cement debris spiked by Pb, Cd and Cs, as indicators of typical hazardous metals and radionuclides existed in the low-level mixed waste in the KHNPPs. The final waste form obtained by the test was evaluated for suitability for disposal. The compressive strength was 261.10 MPa, showing much higher values when compared to other waste form products. The compressive strength of both the sample after irradiation with 107 Gy radiation and that after long-term submersion test (90 days) satisfied the disposal criteria. As a result of the leaching test conducted according to the ANS 16.1 test method, it was confirmed that the leaching index satisfies the disposal criteria.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

Background: The PyeongChang 2018 Winter Paralympic Games (WPG) being one of the most successful Paralympic Games (PG) in modern athletic world history, hosted the largest number of elite athletes representing 49 National Paralympic Committees (NPCs). Objects: The present investigation highlighted the demographic and clinical characteristics of injured athletes and non-athletes and the physiotherapy services provided during the PyeongChang 2018 WPG. Methods: Prospective descriptive epidemiology study, in which the study group comprised of 201 participants (51 athletes and 150 non-athletes) who were admitted to and utilized the polyclinic physiotherapy service of 2018 PyeongChang WPG in Physiotherapy Department of Paralympic Village from March 1, 2018 to March 20, 2018. Results: Qualitative frequency analysis of injury type demonstrated highest number of chronic injuries (51%, n = 100) in athletes and non-athletes. Anatomical injury site analysis revealed that the spine and shoulder areas were affected with equal frequency for athletes (54.9%, n = 14), whereas for non-athletes, the frequencies of spine and shoulder area injuries were 36.7% (n = 55) and 26% (n = 39), respectively. The Pyeongchang WPG showed a high rate of athletes visiting the physiotherapy service during the pre-competition period (33.3%, n = 50), which may have led to smaller incidence rate of traumatic injury. The physiotherapy treatment service analysis demonstrated that manual therapy (35.4%, n = 230) was most commonly utilized, followed by transcutaneous electrical nerve stimulation/interference current therapy (TENS/ICT), therapeutic massage and therapeutic exercise. Conclusion: We established the importance of prophylactic and preventive physiotherapy services to reduce the risk of sports injuries during WPG.

Background: Although various conventional approaches have been employed to reduce spasticity in neurological rehabilitation, only a few studies have shown scientific evidence for its effectiveness. Thus, we introduced a different concept (Ueda method) of rehabilitation therapy that can complement the limitations of conventional therapy. Objects: This study aimed to investigate the immediate effects of the application of the Ueda method on patients with spasticity after stroke via an electrophysiological study. Methods: We conducted a randomized double-blind pilot study in two rehabilitation hospitals involving 30 stroke patients who were randomly allocated to the Ueda (n = 15) and convention (n = 15) groups. Electromyographic data of six examined muscles in both upper extremities of all patients were recorded. The A-ApA index and activation ratios of upper extremity muscles were evaluated and compared between the groups to confirm post-intervention changes in upper-extremity flexor spasticity and flexion synergies. Repeated-measures analysis of variance was conducted to confirm the therapeutic effect (2 × 2) as a function of group (Ueda vs. convention) and time (pre-/post-intervention) on all outcome measures (p < 0.05). Results: In the Ueda group, the mean A-ApA index values differed significantly before and after the intervention (p = 0.041), indicating a weak evidence level; however, the effect size was medium (d = –0.503). The interaction effects of the A-ApA index between the Ueda and convention groups and between pre-intervention and post-intervention stages were significant (p = 0.012). The effect size was large (np 2 = 0.220). In the Ueda group, the activation ratios of the anterior deltoid fiber significantly decreased after the intervention in all reaching tasks. Conclusion: The Ueda method reduces upper-extremity flexor spasticity and changes its synergy in stroke patients and should be considered a rehabilitation therapy for spastic stroke patients.

During the normal operation boron concentrates and spent resins are generated. The boron concentrates are treated by concentrated waste drying system (CWDS) and results in fine powder form. The solidification or application of high integrity container (HIC) is required for the disposal of the dried boron concentrates. The spent resin is stored in storage tank after the water treatment. The spent resin also requires solidification or application of HIC to satisfy the waste acceptance criteria (WAC) in Korea. The solidification process requires periodic validation. The repeated validation and complicated process hesitates the practical application. The application of HIC offers various advantages, including flexible free standing water requirement, higher waste loading compared to solidification, and simple process. The polymer concrete (PC), which is a primary component for PC-HIC exhibits good material stability. The expected transportation mechanism of nuclide in the PC-HIC are 1) diffusion by concentration, 2) permeation by pressure, and 3) capillary suction when considering the disposal condition. Since the PC-HIC effectively prevents the intrusion of neighboring water and volume of free standing water is lower than 1%, it seems that diffusion by concentration is the primary transportation mechanism. In this study, the property of PC is investigated based on Cl ion diffusion test to evaluate the material reliability. The results indicate that PC exhibits superior stability compared to ordinary portland cement. In addition, the reliable life time of PC is estimated base on the element transportation phenomena.

The bacterial soft-rot disease is one of the most critical diseases in vegetables such as Chinese cabbage. The researchers isolated two bacteria (Pseudomonas kribbensis and Pantoea vagans) from diseased tissue samples of Chinese cabbages and confirmed them as being the strains that cause soft-rot disease. Lactic-acid bacteria (LAB), were screened and used to control soft-rot disease bacteria. The researchers tested the treatments with hypochlorous acid water (HAW) and LAB supernatant to control soft-rot disease bacteria. The tests confirmed that treatments with the HAW (over 120 ppm) or LAB (Lactobacillus plantarum PL203) culture supernatants (0.5 mL) completely controlled both P. kribbensis and P. vagans.