The introduction of coastal vessel traffic services enables vessels in coastal waters to navigate in safety or to get her position with ease and prevents the vessel from becoming cause of casualties. But it needs relatively huge amount of cost to construct and operate and maintain. Thus we must be checked with economical adequacy of the the proposed coastal vessel traffic services by comparing the cost of the construction, operation and maintenance with the expected benefit made by the expected decrease in marine casualties. In previous paper, a proper cost-benefit analysis model for the Korean practice will be suggested. In this Paper, the proposed the cost-benefit analysis model of coastal vessel traffic services was applied to the Koje coastal waters 20mi1es from the top of Maemul-Do and Yokchi-Do. As the result, we confirmed the propriety of the cost-benefit analysis with the application of the proposed model to Koje waters. Also, it is verified that the introduction of coastal vessel traffic services, as proposed, is adequate and economical. The cost-benefit analysis model proposed in this study could be used to investigate the economic Propriety of new aids to navigation and traffic safety facilities in the future.

국내 연안의 대표적인 갈조류인 다시마로부터 효과적인 알긴산을 추출하기 위해 다시마 추출액의 전처리 추출공정인 열수 추출공정, 당 또는 염첨가에 의한 추출 및 효소 첨가추출공정에 따른 다시마 추출액의 물성변화를 조사하였다. 열수 추출 및 효소 첨가 추출공정의 경우 추출시간이 증가할수록 점성이 증가함을 보였으며, 추출시간 l시간 이후부터는 비교적 완만한 증가치를 보였다. 당 또는 염첨가에 의한 추출공정시 첨가된 농도가 증가할수록 점성이 증가하였으며, EDTA-2Na의 경우는 첨가농도에 관계없이 매우 낮은 정성치를 나타내었다.

Durable softening water-repellenting agent such as PODCW, PDDCW and PEDCW were prepared by blending cationized compound such as poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate)[PODC], poly(2-dodecyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PDDC] and poly(2-ethylhexyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PEDC], and cationized compound of fatty carbamide, of which synthetic methods were reported in the previous paper, waxes, and emulsifiers. The results of physical tests of the P/C blended fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed a remarkable improvement of the physical properties. The prepared water-repellenting agents, PODCW-6 and PDDCW-1, were treated on P/C blended fabrics with and without resin. For any cases, there are a little changes between initial water repellency and repellency after 3 times washing of the fabrics. Therefore, the water-repellenting agents proved to be a durable agents, and initial water 100+ and 90+ point, respectively.

공진기형 제 2고조파소자(SHG)는 레이저 빔의 에너지 밀도가 높아 고내구성 박막이 필요하다. 본 연구에서는 광학박막 재료로 고융점 산화물인 ZrO2, TiO2, SiO2를 사용하였다. 반응성 스퍼터링 방법으로 제작한 ZrO2, TiO2, SiO2 박막을 XRD, SAM을 사용하여 분석하였고, 박막의 광학적 특성을 평가하였다. SHG 소자의 KTP 및 Nd:YAG 결정의 반사방지막(A/R 코팅)구성은 ZrO2와 SiO2를 사용하여 컴퓨터로 계산하였는데 기본파인 1064nm와 제 2고조파인 532nm에서 각각 0.1%, 0.5%이하의 반사율을 갖도록 하였다. 또한 고반사막(H/R 코팅)의 경우 1064nm에서 99.9%의 반사율을 갖도록 TiO2와 SiO2로 디자인하였다. 제작한 광학박막의 광학적 특성, 레이저 내구성(laser damage threshold), 온습도 안정성 실험 등을 통해 광학박막을 평가하였다.

Cinnamoyl ester(PGEFC) of poly(phloroglucinol-formaldehyde) glycidyl ether which has photosensitive functional group was prepared to apply to photoresist. Photosensitivity of PGEFC was estimated by the solubility difference in organic solvent before and after exposure to light. The yield of residual film was calculated by immersing the sample-coated quartz plates in the solvent which was used in coating. The yield of the residual film which was closely related to the sensitivity of the film, was affected by the degree of polymerization of the backbone resin, sensitizers and their concentration. The sensitivity was depended upon the degree of polymerization. Most of effective sensitizer for PGEFC among the sensitizers was 2, 6-dichloro-4-nitroaniline.

1, 3-Di(2-dodecanoylaminoethyl)-2, 7-dioxy-1, 3, 6, 8-tetraazacyclodecane[DDTD] and sorbitan monostearate(SMS) were synthesized as a main component for softner. O/W type softner(DSA) was prepared by blending of DSA, SMS, polyoxyethylene(10) castor oil, glyceryl monooleate, and polyoxyethylene(7) stearyl ether. After treatment of DSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DSA was found to be durable softner with good softness.

1, 3-Di(dodecanoyl)-2, 7-dioxy-6, 8-di(2-hydroxyethyl)-1, 3, 6, 8-tetraazacyclodecane(DDDT) and pentaerythritol monostearate(PMS) were synthesized as a main component for softner. O/W type softner(DPSA) was prepared by blending DDDT and PMS with polyoxyethylene(10) castor oil, polyoxyethylene(20) oleyl ether, and polyoxyethylene(10) monolaurate. After treatment of DPSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured. As a result of the measurement, DPSA was proved to be durable softner with good softness.

K6P4 O13 flux로부터 30×40×70㎣ 크기의 inclusion이 없는 KTP 단결성을 성장시켰다 성장된 KTP 결정의 SHG 출력 특성 측정 결과 위상정합각은 θ=90˚, φ=23.3˚이었고, φ방향의 angular acceptance는 약 2˚이었다. KTP 결정내 굴절율 변화에 따른 위상정합각 편차는 최대 0.17˚까지 변하였다. 또한 Nd : YAG와 brewster plate를 채용한 내부공진형의 diode pumped SHG module에 KTP 결정을 삽입하여 20mW의 녹색 laser를 얻었다.

S-2유리섬유직물과 폴리에스터 수지로 구성된 적충복합재료를 케블라 49 Thread로 1/2인치, 1인치 2인치 간격으로 스티칭하여 스티칭 간격에 따른 물성과 충격 강도의 변화로부터 최적스티칭 조건을 구하였으며 또한 스티칭하지 않은 적층복합재료와의 물성차를 비교연구하였다. 인장실험과 3점굽힘실험을 통해 시편의 종류별 기본 물성을 알아보았고, 234.7J의 충격에너지를 가해 시편의 파단 현상과 에너지 흡수 능력을 조사하였다. 파단에너지의 약 50% 정도인 110.2J의 충격에너지로 3회 반복실험하여 시편의 손상정도와 충격강도를 비교 검토하였다. 인장실험과 굽힘 실험의 결과 1인치 간격으로 스티칭한 시편이 가장 높은 강도를 보였으며, 충격실험에서도 가장 뛰어난 에너지 흡수능력 및 손상에 대한 저항을 보였다. 반복충격 실험의 결과 스티칭하지 않은 시편은 현저한 충격강도의 감소를 보인 반면 스티칭한 시편은 반복충격에도 에너지 흡수능력이 우수하게 유지되었다. C-scanning으로 손상부위를 관찰한 결과 스티칭으로 인해 손상영역의 확산이 억제되어 현저히 감소함을 보여주었다. 스티칭 간격이 너무 조밀한 경우 강도의 향상보다는 스티칭으로 인한 손상이 더 커져서 1/2인치 간격으로 스티팅한 시편의 경우는 인장강력이나 충격에너지 흡수가 스티칭하지 않은 시편에 비해 오히려 감소하는 결과를 나타내었다. 그러나 이러한 감소에도 불구하고 외부충격에 의한 손상영역의 확산은 효과적으로 억제되어 국부적인 손상만이 발생함을 알 수 있었다.

In this study, we investigated the in vitro anti-biofilm activities of plant extracts of chives (Allium tuberosum), garlic (Allium sativum), and radish (Raphanus sativus L.) against environment harmful bacteria (gram-positive Staphylococcus aureus and, gram-negative Salmonella typhimurium and Escherichia coli O157:H7). In the paper disc assay, garlic extracts exhibited the highest anti-biofilm activity. The Minimal Inhibitory Concentration (MIC) of all plant extracts was generally higher for gram-negative bacteria than it was for gram-positive bacteria. Gram-negative bacteria were more resistant to plant extracts. The tetrazolium dye (XTT) assay revealed that, each plant extract exhibited a different anti-biofilm activity at the MIC value depending on the pathogen involved. Among the plant extracts tested, garlic extracts (fresh juice and powder) effectively reduced the metabolic activity of the cells of food-poisoning bacteria in biofilms. These anti-biofilm activities were consistent with the results obtained through light microscopic observation. Though the garlic extract reduced biofilm formation for all pathogens tested, to elucidate whether this reduction was due to antimicrobial effects or anti-biofilm effects, we counted the colony forming units of pathogens in the presence of the garlic extract and a control antimicrobial drug. The garlic extract inhibited the E. coli O157:H7 biofilm effectively compared to the control antimicrobial drug ciprofloxacin; however, it did not inhibit S. aureus biofilm significantly compared to ciprofloxacin. In conclusion, garlic extracts could be used as natural food preservatives to prevent the growth of foodborne pathogens and elongater the shelf life of processed foods.

In the industrial wastewater that occupies a large proportion of river pollution, the wastewater generated in textile, leather, and plating industries is hardly decomposable. Though dyeing wastewater has generally been treated using chemical and biological methods, its characteristics cause treatment efficiencies such as chemical oxygen demand (COD) and suspended solids (SS) to be reduced only in the activated sludge method. Currently, advanced oxidation technology for the treatment of dyeing wastewater is being developed worldwide. Electro-coagulation is highly adapted to industrial wastewater treatment because it has a high removal efficiency and a short processing time regardless of the biodegradable nature of the contaminant. In this study, the effects of the current density and the electrolyte condition on the COD removal efficiency in dyeing wastewater treatment by using electro-coagulation were tested with an aluminum anode and a stainless steel cathode. The results are as follows: ① When the current density was adjusted to 20 A/m2, 40 A/m2, and 60 A/m2 under the condition without electrolyte, the COD removal efficiency at 60 min was 62.3%, 72.3%, and 81.0%, respectively. ② The removal efficiency with NaCl addition was 7.9% higher on average than that with non-addition at all current densities. ③ The removal efficiency with Na2SO4 addition was 4.7% higher on average than that with non-addition at all current densities.

최근 해상교통량이 증가하고 선박교통 관제구역이 확대됨에 따라 관제사의 업무 부하가 증가하고 있으며, 이로 인해 교통량이 급증하는 경우 관제사가 위험을 인지하지 못하는 상황도 발생하게 된다. 이러한 배경에서 본 논문에서는 관제 업무의 지원을 위해 이상 거동 선박을 자동으로 식별하는 방법을 제안한다. 본 방법은 누적된 AIS 데이터를 이용하여 관제구역 내의 통항 패턴을 학습하고, 학습된 모델과 의 비교를 통해 이상치를 계산하여 이상 거동 선박을 식별한다. 특히, 선박의 거동 상태에 대한 분류 정보가 없더라도 비지도 학습법을 기반으로 항적 데이터를 자동으로 분류하여 통항 패턴을 학습할 수 있으며, 항적의 군집화와 분류 과정을 통해 이상 거동 선박을 실시간으로 식별 할 수 있는 특징을 가진다. 또한, 본 논문에서는 선박운항 시뮬레이터 및 실제 AIS 항적 데이터를 이용한 식별 실험을 수행하였으며, 이를 통해 선박교통관제 시스템에의 활용 가능성을 고찰하였다.

The purpose of this study was to develop environmentally friendly black dye by comparing Ketapang and Gallnut, that have been traditionally used as a black dye. As a result of FT-IR and UV-Vis spectrophotometer analysis, Ketapang was characterized by condensed tannin, while Gallnut showed hydrolyzable tannin. Due to the dyeability characteristic analysis, the color fastness of the non-mordant dye was slightly lowered to grades 1-3. In the dry-cleaning fastness test, both non-mordant and iron mordant were excellent, in grade 4-5, and the daylight fastness was excellent grade 3-5 too. The L* values of Ketapang were 26.93 (pre-mordant) and 29.39 (post-mordant), which were higher than those of Gallnut, 41.90 (pre-mordant) and 43.02 (post-mordant), indicating that Ketapang was more easily colored as a black dye than Gallnut.

The mother machine makes the necessary shape by processing materials such as metal. The SCFs are applied to the processing surface when the mother machine processes the material, thereby improving the cutting conditions. SCFs contain high concentrations of organic components and nitrogen compounds, which can cause problems such as eutrophication and algae bloom. Therefore, proper treatment is required. Electrochemical treatment is expected to be an alternative to conventional processes, and to be useful in various wastewater treatments. Moreover, it is an efficient elimination technique for contaminants and has a simple equipment composition. In this study, the removal efficiency of the T-N contained in the waste SCF using electrochemical treatment is analyzed. The electrode was made of titanium and iridium, made into a perforated metal sheet to prevent an imbalance of the sample concentration in the reactor. Experiments were conducted to examine the effects of current density and the concentration of the supporting electrolyte (NaCl, Na2SO4) on removal efficiency. In the cases with 60 A/m2, 80 A/m2, and 100 A/m2 current densities, the removal efficiencies of the T-N contained in the waste SCF were 51.03%, 68.83%, and 79.58%. Comparing between the addition and non-addition of NaCl, the removal efficiency with the addition of NaCl (5 ~ 10 mM) was higher than for no addition at 60 min for all current densities. The addition of Na2SO4 increased the removal rate of the T-N, but it was less effective than NaCl addition.

As industry continues to develop, the amount of various recalcitrant substances that cannot be removed by conventional wastewater treatment has increased in modern society. The SCFs (Soluble Cutting Fluids) used in metalworking processes contain many chemical substances, such as mineral oils, anticorrosive agents, extreme-pressure additives and stabilizers, as well as high concentrations of organics. Recently, electrolysis has been expected to become an alternative to conventional processes and to be useful in various wastewater treatments. Electrolysis is a highly adaptable industrial wastewater treatment method, having a high efficiency, short processing time, and simple equipment composition, regardless of the biodegradable nature of the contaminants. The effects of operating time, current density, and electrolyte on COD removal of waste SCFs have been studied using the stainless steel (SUS316) electrode in a batch type reactor. The results were as follows. ① Without electrolytes, when the current density was adjusted to 40 A/m2, 60 A/m2, and 80 A/m2, the removal efficiencies of the COD were 25.0%, 37.7%, and 49.1% after 60 min, respectively. ② In the comparison between NaCl (5 ~ 10 mM) addition and non-addition, the removal efficiency with NaCl was higher than for without after 60 min for all current densities. ③ In the comparison between Na2SO4 (5 ~ 10 mM) addition and nonaddition, the removal efficiency with Na2SO4 showed no significant difference to that with NaCl at all current densities.

우리나라 경제의 성장을 이끈 기계산업은 2015년 현재 생산액 100조원, 사업체수 9,526개사, 종사자수 31만 5천명, 부가가치 39조원으로써 제조업 중 생산액 5위, 사업체수 2위, 종사자수 3위, 부가가치 4위에 위치하고 있다. 이러한 기계산업에 있어 공작기계를 이용해 금속을 원하는 모양으로 만드는 금속가공은 반드시 필요한 공정으로 금속가공 시 가공 장비의 수명 연장 및 가공물의 품질 향상을 위해 칩이 형성되는 영역에 적용되어 윤활 및 냉각작용을 하는 절삭유(Soluble Cutting Fluids, SCF)가 이용되고 있다. 절삭유는 수용성 및 비수용성으로 나뉘는데 비수용성 절삭유의 경우 윤활성은 우수하나 경제성 및 발연, 발화등의 문제점이 있으며, 수용성 절삭유는 윤활성은 비교적 떨어지나 냉각성과 경제성이 우수하다는 장점이 있다. 또한 절삭유는 기능 향상을 위해 PAH, 방부제, 파라핀계 염소, 아질산염 등 20~30개의 첨가제가 사용된다. 이는 중추신경계 장애, 이비인후 자극, 피부염 발생 등을 일으킬 위험성이 크다고 알려져 있으며, 고농도의 유기성분 및 질소화합물로 인해 수계에 유출시 부영양화, 녹조현상 등과 같은 문제를 일으킬 수 있다. 따라서 본 연구에서는 전기화학적 처리를 통해 반응시간에 따른 폐수용성 절삭유의 COD 및 T-N의 제거율 변화를 분석하였다. 전기화학적 처리의 중요 인자인 전극은 비교적 가격이 저렴하고 용출량이 낮은 것으로 알려져 있는 SUS316전극을 이용하였으며 자세한 실험 조건을 Table 1에, 연구에 사용한 장치의 모식도를 Fig. 1에 나타내었다.