The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

The package loading process of the lumbering industry is an operation that after a pair of workers bind three or six lumbers into one unit and cut both ends of the lumbers, transports the weight cargo of 30-50kg by one meter, pack and load at a height of 1.2 meters. This package loading process causes lots of noise and wood dust when workers carry out the heavy work as the above. Therefore we developed the monolithic both ends cutting package loading equipment in order to prevent from getting musculoskeletal disease. An loading bar working system of this equipment is improved from pneumatic pressure system to oil pressure system, furnished the newly designed flow dividers, and developed the new system that a both end array is loaded identically. Also we developed the safety equipment of loading bar in order to prevent workers mistake and overload from malfunction during the package loading process. The main cause of job evasion on working place could be solved by preventing the musculoskeletal disease and improving the working environments.

  The package loading process of the lumbering industry is an operation that after a pair of workers binds three or six lumber into a unit and cut the both ends of the lumber, carry and pack and load the weight cargo of 30-50㎏. The package loading process

A multi axis whetstone polishing system, which uses the flow system of the stone polishing machine head, has been developed. The test results show that the defect by line contact polishing does not occur in both ends of the stone and that it came to trim smoothly. In terms of the surface roughness, the corresponding index was decreased by 3.6 times, improving the polishing effect greatly. It decreased significantly the dust and noise with the wet polishing. The factors of the duty evasion at production site can thus be solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

It compared quality characteristics for the stone surface treatment system and its products. With the result, the flame burner equipment was mainly used to the surface treatment of granite, but it occurred greatly the high temperature, the rock fragment, the noise and dust. For the other side, the whetstone polishing machine for the polishing was a maintenance for the specific physical properties of stone, and it did not occur the stone fragment and the dust. The durability of the stone products due to the flame burner was investigated with that it falls to 20~25% more than the surface treatment by the whetstone polishing. Share's hardness of the polishing products in the durability test showed more greatly index than the flame burner and conventional product. The polishing products of Pochon stone in the case of the abrasion resistance showed great more 15% than the general products, more 9% than the products by the flame burner.

It used the flow system of the stone polishing machine head and it developed a multi axis whetstone polishing system. With the result, the defect by line contact polishing does not occur in both ends of the stone, and it came to trim smoothly. As the index of the surface roughness decreased to 3.6 times, the polishing effect improved greatly. It decreased greatly the dust and a noise with the wet polishing, and the factors of the duty evasion at production site were solved with the work environment improvement against the polishing process of the stone industry and work intensive reduction.

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surf

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by water jet to development of equipment. There is to be down noise and dust. According to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor.

To comparison the surface treatment methods of stone board materials, the results of Dorry's abrasive test were 23.4 for water-jet system and 18.9 for flame-burner system. Therefore abrasive hardness, the stone board materials by the water-jet system was greater than one by flame-jet system. As a result of Shore's hardness test, the stone board materials by water-jet system was twice greater than one by flame-jet system. Authors carried out microscopic observation to survey a defection of the composition minerals for two methods, but all of the both methods have not founded a defection. Therefore, the stone board materials by water-jet system was greater durability than one by flame-jet for the surface treatment methods.

A study to analyze and solve problems of a stone surface process experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

First, in order to improve selecting method of quality characteristic level desired by customers, S/N(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight of EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.

First, in order to improve selecting method of quality characteristic level desired by customers, S/H(Signal-to-Noise) ratio of Taguchi in larger-the-better characteristics was applied. Second, the Matrix classification standard of ACE(Attribute Categorization Evaluation) is presented using KANO model on difference analysis of importance and satisfaction through questionnaire from customers. This is for reflecting the diverse EC which customers want in EC quality sufficiently. Also, establishing sales point will be helpful in business strategy through presenting types that are able to decide planning quality. Third, the important measure of EC about correlation among quality characteristics and a new weight o( EC are calculated depending on importance of EC and the weight of customer attribute and materials of relationship matrix through correlation matrix analysis.