The objective of this study is to evaluate the mechanical behaviors and structural integrity of the weldment of high strength steel by using an acoustic emission (AE) techniques. Monotonic simple tension and AE tests were conducted against the 3 kinds of welded specimen. In order to analysis the effectiveness of weldability, joinability and structural integrity, we used K-means clustering method as a unsupervised learning pattern recognition algorithm for obtained multi-variate AE main data sets, such as AE counts, energy, amplitude, hits, risetime, duration, counts to peak and rms signals. Through the experimental results, the effectiveness of the proposed method is discussed.

This study was various sensitive to a customer requirement and sensitive to the market environment of cosmetics with the manufacture company the low. Consequently we arrange the making line properly and are there even though we make a productivity enhance with the personnel expenses reduction to the quality enhance. We do the supplementation with existing U-line the defect of Cell-line of the making method. We try we substitute and to present the improvement direction to apply at the characteristic of the making company so that we are soft.

The objective of this study is to evaluate the mechanical behaviors and structural integrity of the weldment of high strength steel by using an acoustic emission (AE) techniques. Simple tension and AE tests were conducted against the 3 kind of welding test specimens. In order to analysis the effectiveness of weldability, joinability and structural integrity, we used K-means clustering method as a unsupervised learning pattern recognition algorithm for obtained multivariate AE main data sets, such as AE counts, energy, amplitude, hits, risetime, duration, counts to peak and rms signals. Through the experimental results, the effectiveness of the proposed method is discussed.

This study is to develop and operate the R-FCE(Real-time Fuzzy Control Expert System) model on the SBR(Sequency Batch Reactors) type sewage disposal facility which is for the environmental problem of future and the effective treatment. It is the system that regularly handles the input, output information in real time by the Fuzzy control IF-THEN rule. Nowadays the water pollution caused by the increase of population and the industrialization already exceeds the purifying ability of nature and is getting worse. The sewage disposal facility needs an expert having wide experience and know-how because the quality or quantity of inflow water is so irregular that the process of sewage disposal is difficult. In the nation, however, the accumulation of technology is so weak because field-operators avoid the long-term duty. So the accurate and speedy decision or control of field are difficult in the case of emergency situation.

국내의 제조환경에 적합하고 다운사이징 및 개방형의 개발특성을 갖추고, 특히 기업 내의 타 시스템인 생산관리, 품질관리, 자재 및 재고관리 등과도 연계성을 높인다. 현장의 가동상태정보를 품질정보, 생산정보와 인터페이스 하여 실시간적으로 저장, 조회, 분석할 수 있는 관리시스템을 산학연 연구를 통해 구현한다.

온실의 차광설계에 필요한 기초자료를 제시하기 위하여 온실모형과 실험온실을 이용하여 외부차광재의 적정 설치간격 분석, 차광재별 광투과율 분석, 차광율에 따른 온실내부온도의 변화 분석, 차광의 온실내부의 지온변화에 미치는 영향 분석 및 외부차광과 내부차광의 차광효과 비교를 실시하였다. 외부경사차광시 온실 지붕과 차광재의 설치간격은 10~30 cm에서 차광효율이 가장 좋은 것으로 나타났으나 환기창의 개폐를 위한 공간이 필요하지 않는 온실에서는 10cm 정도이면 충분한 간격이 될 것으로 판단된다. 경사차광의 온도차가 수평차광보다 높게 나타나 무환기 상태에서는 경사차광의 차광성능이 수평차광보다 더우수함을 알 수 있었다. 차광재 제작사에서 제시한 투과율과 실제 온실에서 계측한 투과율이 상당한 차이가 있으므로 차광재를 온실의 온도환경제어 목적으로 이용하고자 할 경우에는 차광재의 투과율을 미리 측정하여 검증할 필요가 있었다. 자연환기와 무환기 조건 모두에서 85% 차광온실이 55%차광온실 보다 최대 약 4℃, 평균 약 2℃ 정도의 승온억제효과가 더 있었다. 차광온실 내무의 지온변화는 차광율과 차광방법에 따른 차이는 매우 작았으나 무차광온실과는 큰 차이가 있었기 때문에 온실내부의 지온변화는 차광율과 차광방법 보다는 차광의 유무에 큰 영향을 받는다는 사실을 알 수 있었다. 50%인 차광재가 55% 차고아재보다 광투과율이 높음에도 불구하고 차광율 50%인 외부차광온실이 차광율 55%인 내부차광온실보다 승온억제효과가 더 우수한 것으로 분석되었다. 이러한 결과는 외부차광시 차광재가 흡수한 열이 온실내부로 전달되지 않을 뿐만 아니라 천장을 통한 환기효율이 내부차광보다 양호하기 때문인 것으로 판단되었다.

This study aim is analysis device development for design of experiment with calcium chloride relation used a hardener to search cause of product crack, product reliability improvement building data-base program for computer system of mixture rate, product improvement, and new product development.

This paper reviews and classify fault-tree analysis methods developed since 1960 for system safety and reliability. Fault-tree analysis is a useful analytic tool for the reliability and safety of complex systems. The literature on fault-tree analysis is, for the most part, scattered through conference proceedings and company reports. This paper classify the literature according to system definition, fault-tree construction, qualitative evaluation, quantitative evaluation, and available computer codes for fault-tree analysis.

This study deals with the application of knowledge engineering and a methodology for the assessment and measurement of reliability, availability, maintainability, and safety of industrial systems using fault-tree representation. A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach (insufficient information concerning the relative frequence of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations. The purpose of this study is to describe the knowledge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.

건축물의 인조석 외장재를 생산하고 업체의 품질분석을 하기 위한 연구과제이다. 인조석은 자연석과 동일한 구성성분으로 거의 완벽한 자연석 그대로의 자연스러운 질감과 아름다움이 함께 하며 다양한 종류의 패턴과 세련된 색상 그리고 품위 있는 질감으로 최상급 건축마감재로 선택되어지고 있다. 하지만, 고유기술 및 관리기술의 미흡으로 제작과정 자체가 원시적이며, 제품의 신뢰성 자체를 객관적으로 보증 받을 수 있는 기준이 마련되어 있지 않다. 그리고 본사에서 생산하고 있는 외장재용 인조석은 KS규격도 전혀 이루어져 있지 않을 뿐만 아니라, 자체 시험 자료가 전혀 이루어져 있지 않는 관계로 새로운 로트를 장착했을 때 골재, 안료 및 혼화재 간의 배합비를 어떻게 구성하여야 할 것인가를 순수 기술자의 know-how에만 의존해야 하는 실정이다.

This study deals with the application of knowledge-engineering and a methodology for the assessment & measurement of reliability, availability, maintainability, and safety of industrial systems using fault-tree representation. A fuzzy methodology for fault-tree evaluation seems to be an alternative solution to overcome the drawbacks of the conventional approach(insufficient information concerning the relative frequences of hazard events). To improve the quality of results, the membership functions must be approximated based on heuristic considerations. The purpose of this Is to describe the knowlwdge engineering approach, directed to integrate the various sources of knowledge involved in a FTA.