AZO/Cu/AZO thin films were deposited on glass by RF magnetron sputtering. The specimens showed the preferred orientation of (0002) AZO and (111) Cu. The Cu crystal sizes increased from about 3.7 nm to about 8.5 nm with increasing Cu thickness, and from about 6.3 nm to about 9.5 nm with increasing heat treatment temperatures. The sizes of AZO crystals were almost independent of the Cu thickness, and increased slightly with heat treatment temperature. The residual stress of AZO after heat treatment also increased compressively from -4.6 GPa to -5.6 GPa with increasing heat treatment temperature. The increase in crystal size resulted from grain growth, and the increase in stress resulted from the decrease in defects that accompanied grain growth, and the thermal stress during cooling from heat treatment temperature to room temperature. From the PL spectra, the decrease in defects during heat treatment resulted in the increased intensity. The electrical resistivities of the 4 nm Cu film were 5.9 × 10-4 Ω ‧ cm and about 1.0 × 10-4 Ω ‧ cm for thicker Cu films. The resistivity decreased as the temperature of heat treatment increased. As the Cu thickness increased, an increase in carrier concentration resulted, as the fraction of AZO/Cu/AZO metal film increased. And the increase in carrier concentration with increasing heat treatment temperature might result from the diffusion of Cu ions into AZO. Transmittance decreased with increasing Cu thicknesses, and reached a maximum near the 500 nm wavelength after being heat treated at 200 °C.

본 연구에서는 보육시설 실내공기에서 분리된 식중독 균 주의 독소 유전자 분포와 항생제 내성을 분석하여 보육시설 실내공기에 의한 식중독 발생을 사전 예방하고 식중독 발생 시 적절한 치료를 위한 기초자료를 제공하고자 하였다. 어린이집 실내공기에서 분리된 Staphylococcus aureus 16주, Bacillus cereus 37주를 실험대상으로 하였다. S. aureus와 B. cereus 독소 유전자는 PCR 방법으로 검출하였다. 항생제 감수성 실험은 Clinical and Laboratory Standard Institute의 디스크 확산법에 따라 실험하였다. S. aureus 16 균주 중 11 균주(68.6%)에서 seg와 sei 독소 유전자가 검출되었다. B. cereus 37 균주 모두에서 nheA와 nheB 독소 유전자가 검출되었다. B. cereus 독소 유전자 패턴은 총 12개로 나타났으며 nheA-nheB-nheC 독소 유전 자가 가장 중요한 패턴으로 나타났다. S. aureus 16 균주의 항생제 감수성실험 결과 ampicillin과 penicillin 항생제 에 93.8%, 87.5% 내성을 나타내었으나 methicillin resistance Staphylococcus aureus와 vacomycin resistance Staphylococcus aureus는 검출되지 않았다. B. cereus 37 균주의 항생제 감수성 실험 결과 ampicillin과 penicillin 항생제에 100% 내성을 나타냈었다. 이러한 결과를 종합하여 볼 때 보육시 설 실내공기에 오염된 S. aureus와 B. cereus에 의한 식중독을 발생을 예방하기 위하여 주기적인 환기와 공기 질 관리가 필요한 것으로 판단되었다.

The purpose of this study was to evaluate microbiological contamination of knives and cutting boards in child-care centers. Materials used in this study were swabbed of cutting boards and knives (blade, handle of knife, and joint of handle and blade) in 129 child-care centers. Mean values of total aerobic bacteria of swabs of knives and cutting boards were 1.7±0.7 log cfu/100 cm2 and 1.7±0.9 log cfu/100 cm2, respectively. Contamination levels of coliform bacteria from knives and cutting boards were 1.5±0.6 log cfu/100 cm2 and 1.7±0.8 log cfu/100 cm2, respectively. Comparing microbiological contamination levels of knives and cutting boards according to type and size of child-care centers, there was no significant difference. Bacillus cereus was detected in knife handles and cutting boards. Diarrhea-type toxin gene (entFM) was detected in B. cereus isolates. Antibiotic resistance tests showed that B. cereus was resistant to β-lactam antibiotics. To reduce microbiological contamination levels of knives and cutting boards in child-care centers and prevent food poisoning from bacteria contamination, continuous education by children's food-service management center is needed for sterilization and disinfection of knives and cutting boards.

본 논문에서는 전산구조 해석 데이터를 기반으로 인공 신경망을 활용하여 헬리데크 구조물에 대한 손상 추정 기법을 제안하였다. 헬리데크를 구성하는 트러스와 서포트 부재들에 대해서 절점을 공유하는 부재들을 70개의 모델로 그룹화 하였으며, 최대 3가지 부재 그룹에 무작위로 손상을 부여하여 총 37,400개의 손상 시나리오를 생성하였다. 이들 각각에 대해서 구조 해석 프로그램을 통해 모드 해석을 수행하였으며, 전체 손상 시나리오를 사용 목적에 따라 학습, 유효성 검사, 그리고 검증 시나리오로 분리하였다. 헬리데크의 손상 및 비손상 상태의 동적 응답 특성에 대한 패턴 인식을 위해 PyTorch 프로그램을 활용하여 3개의 은닉층을 가지는 인공 신경망을 구성하였으며, 이에 대해서 다양한 손상 시나리오를 반복 학습함으로써 손실 함수를 최소로 하는 인공 신경망을 도출하였다. 최종적으로 총 400개의 검증 시나리오에 대해서 인공 신경망이 추정한 손상률과 실제 부여된 손상률을 비교하였으며, 그 결과 본 연구를 통해 얻어진 인공 신경망이 손상 부재의 위치와 손상 정도를 매우 높은 정확도로 예측하는 것을 확인하였다.

본 논문에서는 AISC 표준 단면을 설계 변수로 하는 캔틸레버 타입 헬리데크 모델의 유전 알고리즘 최적설계를 소개한다. AISC 표준 단면을 단면 형상별로 분류하고 단면적 순으로 정렬한 후 정수 단면 번호를 부여하여 설계 변수로 최적설계를 수행하였다. 이 과정을 통하여 이산화된 설계 변수를 가지는 최적설계 문제를 해결하기 위해 유전 알고리즘을 적용하였다. 또한, 제약조건으로 허용응력 및 허용응력비 검사 조건을 모두 고려하여 구조물의 구조 안정성을 고려한 설계를 수행하였다. 최적설계 과정중 매 반복계산 마다 수행되는 구조해석 시간을 단축시키기 위해 선형 중첩법을 사용하였고, 이를 통해 구조 해석 시간을 약 75% 감소시킬 수 있었다. 또한 헬리데크 최적설계의 경량 효과를 높이기 위해 부재 그룹 세분화를 하였고, 그 결과를 선행 연구 모델, 기존의 부재 그룹 모델과 비교하였다. 그 결과 선행연구 대비 약 30톤의 부재를 절감할 수 있었으며, 구조적으로도 보다 안전한 헬리데크 설계를 얻을 수 있었다.

LED 혼합광에 따른 표고 품종별 특성을 1주기를 기준으로 조사한 결과 다음과 같다. ‘산조701호’의 경우 백 색광 보다 white+green에서 수량이 147g으로 가장 많았고, 유효경수도 4.7개로 백색광원 보다 많았다. 갓크기 는 white+blue에서 60.1로 다른 처리구에 비해 가장 컸고, 갓굵기도 26.4mm로 가장 컸다. 대길이와 대굵기는 처리구 모두 크게 차이가 나지 않았다. 갓의 명도값은 white+green에 34.4로 다른 처리구에 비해 다소 높았으 며, 황색도와 적색도에서는 크게 차이가 나지 않았다. 갓의 경도값도 처리간 차이가 크게 발생하지 않았다. ‘농진고’의 경우 수량은 white+green에서 80.3g으로 가장 많았고, 유효경수도 1.2로 다른 처리구에 다소 많은 경향이었다. 갓직경은 white+blue에서 68.3mm로 가장 컸고, 갓굵기는 white+green에서 24.8mm로 다른 처리구 에 비해서 크게 나타났다. 대길이는 white+green에서 43.3mm로 가장 컸고, 대직경은 White에서 16.1mm로 가 장 컸다. 갓의 명도, 황색도, 적색도는 모두 크게 차이가 나지 않았으며, 갓의 경도도 처리간 차이가 크게 발 생하지 않았다. 이상의 결과 수량성과 유효경수는 ‘산조701호’와 ‘농진고’ 모두 white+green에서 우수한 결과 가 나타났으나 갓의 생장특성에서는 다소 다른 차이가 나타났다.

A simulation method to estimate microstructure dependent material properties and their influence on performance for a honeycomb structured SiC heating element has been established. Electrical and thermal conductivities of a porous SiC sample were calculated by solving a current continuity equation. Then, the results were used as input parameters for a finite element analysis package to predict temperature distribution when the heating element was subjected to a DC bias. Based on the simulation results, a direction of material development for better heating efficiency was found. In addition, a modified metal electrode scheme to decelerate corrosion kinetics was proposed, by which the durability of the water heating system was greatly improved.

This study estimated the prototype of Yangjindang at the time of its foundation by putting together the literature and discovered data and historical research on family related to Sangju Yangjindang, and looked at its architectural characteristics. These are summarized as follows: First, Yangjindang is an office building which was completed in three years [1629] after its start of construction when Keomgan Jojeong was at the age of 72 [1626] in his latter days and it was used for performing ancestral rites for Jojeong's forefathers of the head family of Pungyang Jo by family origin. Yangjindang was founded as a base of utopia for putting ancestral rites & commemoration, harmoniousness of a tribe, and educational idea into practice together with Ojakdang. Such a movement can be judged to interpret and apply the circumstances of the times realistically and flexibly where they tried to pursue the promotion of Confucianism & studies of the proprieties as well as the consciousness of practice, and to bring a tribe into harmony after the war through the retirement of Toegye School. Second, it is located at a topographically ideal spot on the edge of the Jangcheon-a tributary of Nakdong with a good physiology and landscape and its location was also the lot for a house of Jojeong's ancestor, which was burned down by war. Behind such a location and planning of Yangjindang, it is presumed, though not certain that it was modelled after Naeap village at Andong- Jojeong's parents-in-low's home. Third, as for its foundation size, it's a head house as much as about more than 100-kan, and its structure is composed of Samyo, Bonche, and Yangjindang. In addition, arrangements of buildings and its composition system and renovation procedures followed Chu-tzu Garyoe. Composition of Samyo can be restored to Yangjindang, Jugo, Woesammun, and Samyo; however, there has been no case of existence in case of Jugo building composition & arrangement takes on an aspect of a compromise between Gamyojido and Sandangjido of Garoe, which seems to be the result from flexibly interpreting and applying the rituals and studies of the proprieties of Toegye School in keeping with locational topography and realistic circumstances while making it a principle for them to observe by Toegye School. There exists a difference between Bonche and its counterpart of the upper class housing at Sangju district in that Bonche[main building] is a squre-shaped 'Ttuljip' typical of Andong setting a family ancestral ritual as a main function. Fourth, there existed a lot of hardships in raising money to cover repairs in time of doing repairs to this structure after 180 years since its establishment. In case of the repair work on Bonche, the level of renovation was limited to the replacement of old materials for rafters, doorpost, roof members and railings with new materials, together with partial alterations in case of window system. It is estimated that Yangjindang was renovated in 1808, and afterwards it was renamed Okryujeong after being re-built at another site. Through the repairs, the floor was expanded for the clan's meeting, and angle rafters and roof members were mended as well. Especially, the plane and structure of Okryujeong which was re-built at another site are expected to give clues to its restoration due to the resemblance to original appearance of Yangjindang at the time of its renovation in 1808.

The building site was presumed as the Howonjeokwon or the Dasiwonji established at the traffic route among western inland areas in old Pyeonghaegun. The groundwork was composed inclination terrace of two steps. The upper step was the territory of the main house of ceremony․ symbolic+lodging function and the down step was divided in the territory of both Ikrang-chae of boarding and lodging management function and the territory of Haengrang-chae․pavilion of rest․reception․management. The building composition by each territory formed space differentiation with the line of flow according to the thorough rule of court rank. The arrangement composition set the strong center axis in tandem, and it was the building arrangement interpreting the territory and the rule of court rank by function as the relationship of master and servant and was the building type emphasizing on the whole unity with the geometric symmetry structure. The Dasiwonji and the Hyeeumwonji had the common point which is the traffic architecture of semi-governmental management reinforcing the boarding lodging function in the place which a visitor stayed. The Haeeumwonji and Dasiwonji had the difference in the size, but was the same in the composition system of construction. The external space and the system of the line of flow decided from the functional territory separation and the hierarchical rank as thorough as the geometric arrangement focusing on the whole unity. Namely, it was the strict and unusual system of the line of flow depended on the thorough rule of court rank than the efficient approach or arrangement of the line of flow. After being established to be the Howonjeokwon at the end of Koryeo, it disappeared at the time of the invasion of Japanese pirates when it was the time of the King Woo in Koryeo. It is presumed that it was continued until both wars, Imjin․Byeongja, ago after changing its name to the Dasiwon, being restored to the small size at the end of Koryeo-at the early of Choseon.

In the present study, the focus is on the effect of cobalt oxide powder in the carbothermal reduction of the titanium-cobalt-oxygen based oxide powder by solid carbon for the optimizing synthesis process of ultra fine TiC/Co composite powder. The titanium-cobalt-oxygen based oxide powder was prepared by the combination of the spray drying and desalting processes using the titanium dioxide powder and cobalt nitrate as the raw materials. The titanium-cobalt-oxygen based oxide powder was mixed with carbon black, and then this mixture was carbothermally reduced under flowing argon atmosphere. Changes in the phase structure and thermal gravity of the mixture during carbothermal reduction were analysed using XRD and TGA. Titanium-cobalt-oxygen based oxide powder desalted at had a mixture of . And the one desalted at had a mixture of . In the case of the former powder, the reduction of cobalt oxide powder in the titanium-cobalt-oxygen based oxide powder occurred at lower temperature than the latter one. However, the carbothermal reduction of titanium dioxide powder in the titanium-cobalt-oxygen based oxide powder with a mixture of occurred at higher temperature than the one with a mixture of . And also, the former powder showed a lower TiC formation ability than the latter one.