공용 중인 교량의 건전성을 파악하고 유지관리에 활용하기 위해 서해대교 사장교 구간에는 구조건전성모니터링(structural health monitoring) 시스템이 설치되어 있다. 이를 통해 바람, 지진과 같은 작용하중(applied loads)과 함께 진동, 형상변화, 신축, 부재력, 응력(변형률)과 같은 구조응답(structural response)을 모니터링하고 있다. 2000년 준공 이후 현재까지 장기간 축적된 구조응답 데이터를 기반으로 분석 및 평가를 수행한 결과, 상시 거동뿐만 아니라 다양한 재난상황 시에도 교량 구조계의 거동은 건전한 상태임을 확인할 수 있었다.

To monitor structural responses and detect serious events, an image-based health monitoring technology for existing bridges has been developed. The image-based system allows users to connect and remotely control cameras in real-time. The developed system was successfully tested and verified in the test bed bridges. This paper presents the application examples of it.

To monitor structural responses and detect serious events, an image-based health monitoring technology for existing bridges has been developed. The image-based system allows users to connect and remotely control cameras in real-time. The developed system was successfully tested and verified in the test bed bridges. This paper presents the application examples of it.

To monitor static and dynamic responses of bridges, an image-based monitoring system using networking Pan-Tilt-Zoom IP (Internet Protocol) cameras has been developed. Verification testing is carried out during the human-excited vibration test of the stay cables in a cable-stayed bridge. As well as identifying the natural frequencies of the stay cable, the reasonable damping ratios are successfully extracted from the acquired images.

차량충돌은 가장 빈도가 높은 교량 붕괴의 원인 중 하나로 알려져 있으며, 최근 재해에 대하여 대책 수립 및 관리의 필요성이 공익 안전을 위해 제기되고 있다. 본 연구에서는 차량 충돌로 인한 교량 피해에 대하여 위험도 분석을 실시하였다. 위험도 분석 단계는 세 단계로 구 분하였고, 예비위험분석 단계에서는 충돌의 발생가능성을 확인하며, 기본위험분석 단계에서는 발생가능성, 취약성, 중요도에 대한 위험도 점 수평가를 통한 위험도 등급을 산정하였다. 마지막 상세위험분석 단계에서는 위험도가 높은 등급에 대하여 상세분석을 실시한다. 본 연구에서 는 예비위험분석과 기본위험 단계에 집중하여 위험도 등급 구분을 위한 네 가지의 급간분류법을 적용하였다. 충돌 사례와 분석 결과를 비교하 여 적절한 급간분류법을 결정하고자 하였다. 본 연구에서 사용된 위험도 분석법은 유사한 재난에 대한 대책수립을 위해 사용될 수 있을 것이다.

It is largely divided into two kinds in freezing phenomenon of the tunnel. Waterproof membrane damage inside the tunnel construction joints leaked into groundwater leak occurs in the icicle and despite the absence of damage to the waterproofing membrane, waterproofing membrane from the back of the ground water is frozen freeze by interfering with smooth

Bridges have been collapsed due to disaster, and this has required much of expenses. Vehicle collision cause critical damage on Bridges. This paper focus on vehicle collision risk level for highway bridges. In this study use 4 classification, Natural Break based Interval, Equal Interval, Standard Deviation based Interval and Reliability based Interval.

To monitor static and dynamic responses of bridges, an image-based monitoring system using networking PTZ IP (Pan-Tilt-Zoom Internet Protocol) cameras has been developed. Triggers to acquire video or still-images are performed when structural events like vibrations or excessive displacements occur. Also, periodic or user-defined triggers can be performed. When a trigger occurs, the system collects bridge members' images along the pre-defined touring route of a group of presets and extracts relative displacements between images.

This paper aims at optimizing fire risk assessment for highway bridges using different classification schemes. Based on results, highway bridges are categorized into three groups according to fire risk levels and compared to actual cases of fire incidents. From comparisons, it is required to determine the proper classification scheme according to type of risk and data.

This study examined the collapse of bridge under extreme events. As a result, numerous bridges collapsed by scour, collision, fire and earthquake. The research team studied four cases of previous bridge collapse and restoration following extreme events. Finally, the disaster type factor were selected.

To monitor dynamic responses of bridges, the vision-based system using commercial video-related equipment is developed. The research and development has been performed for dynamic characteristics extraction of external tendons in PSC box girder bridges. The vision-based dynamic measurement system consists of an industrial camera and notebook computer that can measure tendon's vibrations with 100 fps. The vision-based system was successfully tested and verified in the testbed bridge.

This study evaluates thermal movements of an existing bridge using digital image processing technologies. Digital images are acquired from smart phones. Thermal movements which extracted from bridge bearings' images are compared to the results of conventional displacement transducers. It is concluded that the image-based process for measuring thermal movements of bridges is accurate, practical and cost-effective.

In this study, measured data of cable-supported bridge’s thermal expansion and contraction were analyzed. To evaluate structural behaviors by temperature variations, measured data were compared with theoretical values by correlation analysis between thermal movements and temperatures. Additionally, the cumulative displacements were analyzed. Through the analysis of the results, the evaluation methods of cable-supported bridge's thermal expansion and contraction is suggested.