In the powder bed fusion (PBF) process, a 3D shape is formed by the continuous stacking of very fine powder layers using computer-aided design (CAD) modeling data, following which laser irradiation can be used to fuse the layers forming the desired product. In this method, the main process parameters for manufacturing the desired 3D products are laser power, laser speed, powder form, powder size, laminated thickness, and laser diameter. Stainless steel (STS) 316L exhibits excellent strength at high temperatures, and is also corrosion resistant. Due to this, it is widely used in various additive manufacturing processes, and in the production of corrosion-resistant components with complicated shapes. In this study, rectangular specimens have been manufactured using STS 316L powder via the PBF process. Further, the effect of heat treatment at 800 °C on the microstructure and hardness has been investigated.

본 연구는 지역별로 수집한 유채 균핵병 균주에 대해 등록 된 3종의 약제를 사용하여 저항성 검정을 실시하였고, 저항성 발생 가능성이 있는 약제의 작용 기작과 관련한 유전자를 분석하여 변이 유무를 확인하였다. 1. Carbendazim-diethofencarb 약제배지의 경우, 0.1 ppm 농도에서 균사 생장 억제율은 13.3~41.9% 범위로 나타났으며, 1 ppm 이상의 농도에서는 모든 균주에서 96.1% 억제율을 보여 균주의 저항성이 확인되지 않았다. 2. Fludioxonil 약제배지는 0.1 ppm 농도에서 균사의 생장이 94.2% 이상 억제되었으며, 1 ppm 농도에서부터 100%의 억제 율을 보여 가장 약제 효과가 우수한 것으로 나타나 수집한 모든 균주에서 약제의 감수성을 확인하였다. 3. Boscalid 약제배지는 앞선 2종의 약제에 비해 균주의 균사 생장 억제가 뚜렷하지 않았다. 특히 10 ppm 농도에서 무안 수집 균주는 93.9%, 나주 수집 균주는 79.3%로 지역 간 차이가 있었으며, 1000 ppm의 높은 약제 농도에서도 균사의 생장을 100%까지 억제하지 못해 약제에 대한 균주의 저항성 발생 가능성을 추측하였다. 4. 3종의 시험 약제 농도별 균핵병 균주의 균사 생장을 50% 억제하는 농도(EC50)를 분석한 결과, Fludioxonil, Carbendazim-diethofencarb, Boscalid 약제순이었으며, 그 값은 각각 0.06, 0.16, 0.43 ppm으로 나타났다. 5. 또한, 3종의 시험 약제 농도별 발생한 균주의 균핵 형성 능력은 1 ppm 농도에서 Carbendazim-diethofencarb는 5.6개, Fludioxonil은 0개로 나타난 반면, Boscalid는 최대 11.3개의 균핵이 형성되어 차이를 확인할 수 있었다. 6. Boscalid 약제에 대한 균주의 저항성을 확인하기 위해 해당 약제의 작용 기작인 SDHI와 관련된 유전자 SdhB를 염기 서열 분석하였다. 염기서열 분석 결과 무안 및 부산에서 수집 한 균주의 경우 SdhB 표준 염기서열과 일치하여 감수성이었으나, 나주, 당진, 제주, 영암에서 수집한 균주는 32번째 염기 가 C→T로 치환되어 GCA(Alanine)→GTA(Valine) 점 돌연변이를 확인하였다.

The present study is aimed at examining in multilateral ways the structural relationship among technological orientation, market orientation and product development performance of manufacturing companies, which are deemed to be key factors for them to increase absorptive capacities. From the study, it was revealed that: First, in terms of the relationship between market orientation and absorptive capacities, it was made clear by the analysis that the market orientation sought after by manufacturing companies has influence upon their absorptive capacities. Second, with regard to the relationship between technological orientation and absorptive capacities of manufacturing companies, the analysis found that the technological orientation pursued by them affects their absorptive capacities. Third, as for the relationship between absorptive capacities and product development performance, the analysis made it clear that the absorptive capacities of manufacturing companies exerts influence upon their product development performance. Fourth, in respect to the relationship between market orientation and product development performance, it was concluded from the analysis that market orientation produces effect upon product development performances like technological innovation and acquisition of new technologies needed for product development. Finally, regarding the relationship between technological orientation and product development performance of manufacturing companies, it became obvious from the analysis that the technological orientation affects the product development performance.

This study investigated the effect of solvent on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid and compared the alloy particles fabricated by three different methods (PWE in liquid, PWE in Ar, plasma arc discharge), for high temperature oxidation-resistant metallic porous body for high temperature soot filter system. Three different solvents (ethanol, acetone, distilled water) of liquid were adapted in PWE in liquid process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. The alloy powder synthesized by PWE in ethanol has good particle size and no surface oxidation compared to that of distilled water. Since the Fe-based alloy powders, which were fabricated by PWE in Ar and PAD process, showed surface oxidation by TEM analysis, the PWE in ethanol is the best way to fabricate Fe-based alloy nano powder.

This study investigated the effect of wire diameter and applied voltage on the fabrication of Ni-free Fe-based alloy nano powders by employing the PWE (pulsed wire evaporation) in liquid, for high temperature oxidation-resistant metallic porous body for high temperature particulate matter (or soot) filter system. Three different diameter (0.1, 0.2, and 0.3 mm) of alloy wire and various applied voltages from 0.5 to 3.0 kV were main variables in PWE process, while X-ray diffraction (XRD), field emission scanning microscope (FE-SEM), and transmission electron microscope (TEM) were used to investigate the characteristics of the Fe-Cr-Al nano powders. It was controlled the number of explosion events, since evaporated and condensed nano-particles were coalesced to micron-sized secondary particles, when exceeded to the specific number of explosion events, which were not suitable for metallic porous body preparation. As the diameter of alloy wire increased, the voltage for electrical explosion increased and the size of primary particle decreased.

본 연구는 전자 및 반도체 산업의 각종 에칭공정에서 발생되는 중금속 함유 산성 폐에칭액을 NF 막분리법을 이용하여 에칭액 회수와 중금속 처리를 효율적으로 수행하기 위한 NF 막공정의 운전조건을 설정하기 위한 기본 자료를 확보하는데 있다. 이를 위해 3가지 종류의 상용 NF 막(General Electric Co. Duraslick NF-4040 막, Dow Co. Filmtec LP-4040 막 및 Koch Co. SelRO MPS-34 4040 막)을 대상으로 Pb+2 중금속을 함유한 모의 질산 폐에칭액의 회분식(dead-end) 막여과 실험을 수행하여 폐에칭액의 투과 플럭스와 Pb+2 중금속 이온의 총괄 배제도를 측정하여 폐에칭액 처리에 우수한 NF 막을 선정하였다. 실험결과 질산용액에의 막 보관기간이 길수록, 질산용액의 pH가 낮을수록 산에 의한 막의 손상이 심해졌으며, 질산에 의한 막의 손상은 SelRO MPS-34 4040 < Duraslick NF-4040 < Filmtec LP-4040 막의 순서로 심하게 일어났다. 또한 질산용액에의 막 보관기간이 길수록, 질산용액의 pH가 낮을수록 Pb+2 이온의 배제도가 낮아졌으며, 배제도 값은 Duraslick NF-4040 막의 경우에는 95% 수준의 초기 배제도 값에서 질산용액에의 4달 보관 후에는 20% 수준으로, SelRO MPS-34 4040 막의 경우에는 초기 85% 수준에서 4달 후 65% 수준으로, Filmtec LP-4040 막의 경우에는 초기 90% 수준에서 4달 후 10% 이하 수준으로까지 감소하였다. 3종류의 상용 NF 막 중 내산성 용도로 개발된 SelRO MPS-34 4040 막이 중금속 함유 산성 폐에칭액의 재생에 가장 적합하였다.

Fe based (FeCSiBPCrMoAl) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The Fe-based amorphous powders and the Fe-Cu composite powders were compacted by a spark plasma sintering (SPS) process. Densification of the Fe amorphous-Cu composited powders by spark plasma sintering of was occurred through a plastic deformation of the each amorphous powder and Cu phase. The SPS samples milled by AGO-2 under 500 rpm had the best homogeneity of Cu phase and showed the smallest Cu pool size. Micro-Vickers hardness of the as-SPSed specimens was changed with the milling processes.

Fe based (FeCSiBPCrMoAl) amorphous powder, which is a composition of iron blast cast slag, were produced by a gas atomization process, and sequently mixed with ductile Cu powder by a mechanical ball milling process. The experiment results show that the as-prepared Fe amorphous powders less than 90 m in size has a fully amorphous phase and its weight fraction was about 73.7%. The as-atomized amorphous Fe powders had a complete spherical shape with very clean surface. Differential scanning calorimetric results of the as-atomized Fe powders less than 90 m showed that the glass transition, T, onset crystallization, T, and super-cooled liquid range T=T-T were 512, 548 and 36, respectively. Fe amorphous powders were mixed and deformed well with 10 wt.% Cu by using AGO-2 high energy ball mill under 500 rpm.

This paper presents a novel single-step method to prepare the Ag nanometallic particle dispersed fluid (nanofluid) by electrical explosion of wire in liquid, deionized water (DI water). X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and transmission electron microscope (TEM) were used to investigate the characteristics of the Ag nanofluids. Zeta potential was also used to measure the dispersion properties of the as-prepared Ag nanofluid. Pure Ag phase was detected in the nanofluids using water. FE-SEM analysis shows that the size of the particles formed in DI water was about 88 nm and Zeta potential value was about -43.68 without any physical and chemical treatments. Thermal conductivity of the as-prepared Ag particle dispersed nanofluid shows much higher value than that of pure DI water.

The ultrafine titanium carbonitride particles () below 100nm in mean size were successfully synthesized by Mg-thermal reduction process. The nanostructured sub-stoichiometric titanium carbide () particles were produced by the magnesium reduction at 1123K of gaseous and the heat treatments in vacuum were performed for five hours to remove residual magnesium and magnesium chloride mixed with . And final phase was obtained by nitrification under normal gas at 1373K for 2 hrs. The purity of produced particles was above 99.3% and the oxygen contents below 0.2 wt%. We investigated in particular the effects of the temperatures in vacuum treatment on the particle refinement of final product.

Fe based () amorphous powder were produced by a gas atomization process, and then ductile Cu powder fabricated by the electric explosion of wire(EEW) were mixed in the liquid (methanol) consecutively. The Fe-based amorphous - nanometallic Cu composite powders were compacted by a spark plasma sintering (SPS) processes. The nano-sized Cu powders of 200 produced by EEW in the methanol were mixed and well coated with the atomized Fe amorphous powders through the simple drying process on the hot plate. The relative density of the compacts obtained by the SPS showed over 98% and its hardness was also found to reach over 1100 Hv.

The hypereutectic Al-20 wt%Si powders including some amount of Cu, Fe, Mg, Mn were prepared by a gas atomization process. In order to get highly densified Al-Si bulk specimens, the as-atomized and sieved powders were extruded at , Microstructure and tensile properties of the extruded Al-Si alloys were investigated in this study. Relative density of the extruded samples was over 98%. Ultimate tensile strength (UTS) in stress-strain curves of the extruded powders increased after T6 heat treatments. Elongation of the samples was also increased from 1.4% to 3.2%. The fracture surfaces of the tested pieces showed a fine microstructure and the average grain size was about

Ni based() bulk metallic glass(BMG) powders were produced by a gas atomization process, and ductile Cu powders were mixed using a spray drying process. The Ni-based amorphous powder and Cu mixed Ni composite powders were compacted by a spark plasma sintering (SPS) processes into cylindrical shape. The relative density varied with the used SPS mold materials such as graphite, hardened steel and WC-Co hard metal. The relative density increased from 87% to 98% when the sintering temperature increased up to in the WC-Co hard metal mold.

[ ] oxide layer on the surface of each W(tungsten) nanopowder produced by the electric explosion of wire(EEW) process were formed during the 1vol.% air passivation process. The oxide layer hindered sintering densification of compacts during SPS process. The oxide phase was reduced to the pure W phase during SPS. The W nanopowder's compacts treated by the hydrogen reduction showed high sintered density of 94.5%. after SPS process at .