In order to support start-ups effectively with limited resources, it is necessary to provide support tailored to start-up companies. Businesses that are operating in local incubation centers may have different demands for the support depending on the region characteristics. This study was worked on companies that have entered into the incubation center 'Youth Cube', which is operated by Ansan City. We investigated the perception of importance in the field of support to identify support policy priorities, and the satisfaction level of each field of support currently supported. Then We conducted an IPA analysis to derive the direction of support. The Ansan area has regional characteristics that it is located in the metropolitan area with well-equipped start-up infrastructure and many innovative institutions, As a result of the importance survey, technology commercialization was recognized as the most important, and education/mentoring was recognized as the least important. Satisfaction with the space and facilities that can be used free of charge was the highest, and the satisfaction was the lowest for entrepreneurship education/mentoring, as was the degree of importance. In addition, according to each quadrant, we derived support that should be maintained, support that should be intensively improved, support that should be given a low policy priority, and support directions that should be kept in mind to avoid excessive support.

NDF (No Defect Found) is a phenomenon in which defects have been found in the manufacturing, operation and use of a product or facility, but phenomenon of defects is not reproduced in the subsequent investigation system or the cause of the defects cannot be identified. Recently, with the development of the fourth industrial revolution, convergence of hardware and software technologies in various fields is spreading to products such as aircraft, home appliances, and mobile devices, and the number of parts is increasing due to functional convergence. The application of such convergence technologies and the increase in the number of parts are major factors that lead to an increase in NDF phenomena. NDF phenomena have a significant negative impact on cost, reliability, and reliability for both manufacturers, service providers and operators. On the other hand, due to the nature of NDF phenomena such as difficult and intermittent cause identification and ambiguity in judgment, it is common to underestimate the cost of NDF or fail to take appropriate countermeasures in corporate management. Therefore, in this paper, we propose a methodology for estimating NDF costs by the PAF model which is a quality cost analysis model and ABC (Activity Based Costing) technique. The methodology of this study suggests a detailed procedure and the concept to accurately estimate the NDF costs, using ABC analysis, accounting system information, and IT system data. In addition case studies have validated the methodology. We think this could be a valid methodology to refer to when estimating the cost of other parts. And, it is meaningful to provide important judgment information in the decision-making process based on quality management and ultimately reduce NDF costs by visualizing them separately by major variable factors.

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

The dynamic capabilities of sensing market signals, creating new opportunities and reconfiguring resources and capabilities to new opportunities in a rapidly changing economic environment determines the competitiveness of the enterprise to create added value and survival. This study conceptualized a two-stage performance measurement framework based on the casual model of resource (input)-process-performance (output). We have developed a ‘Process capability index’ that reflect the dynamic capabilities factors as a key intermediary product linking resource inputs and performance outputs in enterprise performance measurement. The process capability index consists of four elements : manpower (level of human resource), operation productivity, structure and risk management. The DEA (Data Envelopment Analysis) model was applied to the developed performance indicators to analyze the branch office performance of a telecom company. Process capability efficiency (stage 1) uses resource inputs to reach a certain level of process capabilities. In performance result efficiency (stage 2), the process capabilities are used to generate sales revenues and subscribers. The two-stage DEA model derives intermediate output values that optimize the individual stages simultaneously. Some branch offices in the telecom company have focused on process capability efficiency or some other branch offices focused on performance result efficiency. Positioning map using two-stage efficiency decomposition and benchmarking can help identify the sources of inefficiencies and visualize strategic directions for performance optimization. Applications of two-stage DEA in conjunction with the case study that are meaningfully used in performance measurement areas have been scarce. In particular, this paper has the contribution to present a new performance measurement model considering the organization theory, the dynamic capabilities.

Recently, with the increase in demand for big data analysis, related techniques and tools are being developed, which makes it possible to utilize data that was difficult to analyze by traditional methods. Topic modeling is a useful technique for deriving topics from a vast amount of text, and is often used in research on trends and predictions of academic research or science and technology. However, the topic derived from the topic modeling is a combination of words presented on the basis of the frequency and probability of simultaneous occurrence, and cannot describe the importance or priority of each word. Therefore, in this study, we applied AHP (Analytic Hierarchy Process) technique to evaluate the priority of the result derived from topic modeling (Topic). In this study, bibliographic data (total of 15,888 articles) of academic researches related to consulting were collected and used in the analysis of this study in order to suggest prioritization method using Topic-Modeling and AHP.

‘Consulting’, which is the main research topic of the knowledge service industry, is a field of study that is essential for the growth and development of companies and proliferation to specialized fields. However, it is difficult to grasp the current status of international research related to consulting, mainly on which topics are being studied, and what are the latest research topics. The purpose of this study is to analyze the research trends of academic research related to ‘consulting’ by applying quantitative analysis such as topic modeling and statistic analysis. In this study, we collected statistical data related to consulting in the Scopus DB of Elsevier, which is a representative academic database, and conducted a quantitative analysis on 15,888 documents. We scientifically analyzed the research trends related to consulting based on the bibliographic data of academic research published all over the world. Specifically, the trends of the number of articles published in the major countries including Korea, the author key word trend, and the research topic trend were compared by country and year. This study is significant in that it presents the result of quantitative analysis based on bibliographic data in the academic DB in order to scientifically analyze the trend of academic research related to consulting. Especially, it is meaningful that the traditional frequency-based quantitative bibliographic analysis method and the text mining (topic modeling) technique are used together and analyzed. The results of this study can be used as a tool to guide the direction of research in consulting field. It is expected that it will help to predict the promising field, changes and trends of consulting industry related research through the trend analysis.

Improving efficiency of the telecommunication is crucial to the development and growth of Korean economy. Recently, it has become important with the huge development of information technology and its greater potential for extensive impact on the rest of the economy. Hence, it is useful to determine the factors that help enhance efficiency in telecommunication and consider them in improving the evaluation model. This study applies DEA (data envelopment analysis) to evaluate the relative efficiency of 51 branches of a Korean telecommunication company. Using the super-efficiency approach, we tested outliers which may affect the results and ranked the efficient branches. A method of deriving key variables applied to business operation is proposed to identify the key performance indicators for evaluation that takes environmental (non-discretionary) factors into account. We used the extended CCR model proposed by Banker and Morey to investigate the influence of non-discretionary factor. The information provided by the model (slacks, weights) and the sensitivity analysis shows that the most important indicator that affects the branch performance is operating cost. The results of sensitivity analysis show that average efficient score decreases from 0.972 (base case) to 0.863 for CASE2-COST. The average score of the data proves the priority of operating cost over other indicators. The effect of environmental (non-discretionary) variable was found to be significant. The population effect was positive and improved overall efficiency by 0.91% on average. Non-discretionary factor plays a meaningful role explaining the performance of branches. The performance optimization report can help a manager of an inefficient branch to develop branch strategies. Managers can identify the top-performing units, study best practices and adopt the strategy to the organization.

The study aims at quantifying the effect of nano technology in the fields of economics and social aspects by using the methodology of system dynamics. A case study which using selenium oxide nanoparticles as additive agent in order to enhance fuel efficiency was selected as an example of nano technology in economic and societal benefits. Additionally, models for exhaust gas from combustion of fuel (diesel) and related issues are developed to evaluate real-time assessment of the effect of nano technology. It was found that the selenium oxide nanoparticles increase fuel efficiency, and it also affects on the amount of exhaust gas and the respiratory disease related issues. The results of this study which give quantitative value for the effect of nano technology can be used as objective references in development of national policy.

It is difficult to make an accurate estimate of the economic value and effects on societal economy of Nano-technologies. This research measures an economic value of Nano-technologies quantitatively and analyzes its influences on societal economy. This paper chooses some major industries as analysis targets and adapts the DEFRA comparative methodology model which has been developed in the UK and recommended by OECD. For this reason, some industries which are in range of economic value assessment were investigated and related data were collected. Also, the economic value and societal influences of Nano-technologies were calculated, through the procedure of the model. In addition, this study conducts a questionnaire to experts for the validity of measurement results and procedures. This paper suggests a guideline for economic value and effects on societal economy of Nano-technologies assessments through quantitative Defra comparative methodologies.

Because of the changing educational environments, Korean universities have to stand up to the challenge of enhancing their performances in educational activities. Therefore, Korean universities should seek ways to improve its competitiveness. The evaluation of Korean universities has been conducted by the Government and other media agencies like JoongAng’s Daily to promote the development of universities. The purpose of this study is to evaluate and compare the relative efficiency of Korean universities using DEA (Data Envelopment Analysis) and AHP (Analytic Hierarchy Process) models. To produce reasonable results, major input and output variables have been determined in a step using a Profiling method, Spearman correlation analysis and AHP model. Also, this study shows that the relative efficiency for Korean universities is obtained not only based on quantity of output, but also on the basis of the quality of the output. Drawing upon the results of the analysis, this study provides a comprehensive and practical method for evaluating the performance of universities in terms of efficiency.

In the manufacturing industry, fostering talented workers has become a core activity as well as an important resource leading to manufacturing enterprises’ innovative activities, which has come to the fore as one of the biggest success factors for innovat

Alloy 617, Ni-22Cr-12Co-9Mo base oxide dispersion strengthened alloy was fabricated by using mechanical alloying, hot isostatic pressing and hot rolling. Uniaxial tensile tests were performed at room temperature and at . Compared with the conventional Alloy 617, ODS alloy showed much higher yield strength and tensile strength, but lower elongation. Fracture surfaces of the tensile tested specimens were investigated in order to find out the mechanism of fracture mode at each test temperature. Grain adjustment during tensile deformation was analyzed by electron backscattered diffraction mapping, inverse pole figures and TEM observation.

Yttrium oxide is one of the most thermo-dynamically stable materials, so that it is generally used as a dispersoid in many kinds of dispersion strengthed alloys. In this study, a nickel-base superalloy is strengthened by dispersion of yttrium oxide particles. Elemental powders with the composition of Ni-22Cr-18Fe-9Mo were mechanically alloyed(M.A.) with 0.6 wt% . The MA powders were then HIP(hot isotactic press)ed and hot rolled. Most oxide particles in Ni-22Cr-18Fe-9Mo base ODS alloy were found to be Y-Ti-O type. The oxide particles were uniformly dispersed in the matrix and also on the grain boundaries. Tensile test results show that the yield strength and ultimate tensile strength of ODS alloy specimens were 1.2~1.7 times higher than those of the conventional X(R), which has the same chemical compositions with ODS alloy specimens except the oxide particles.

한반도 서해 중부 안면도 사질 조석대의 퇴적 환경을 연구하기 위해서 142점의 표층 퇴적물을 분석하였고, 12개 측선에서 수준측량을 실시하였다. 표층퇴적물의 퇴적상은 소량역질사, 사, 소량역사질니 등 다양하게 나타났고 외해방향으로 세립해진다. 조직변수는 조상대와 조간대에서는 평균입도가 조립하고 분급이 양호하며 양의 왜도를 갖는 특징을 보이고, 조하대에서는 평균입도가 세립하고 분급이 불량하며 음의 왜도를 갖는 특징을 보인다. C-M도에 의하면 퇴적 기작은 조상대와 조간대의 퇴적물은 밑짐이동과 점이부유가 혼합된 형태로 이동하고, 조하대의 퇴적물은 점이부유와지속적부유의 형태로 이동하는 것으로 나타났다. 주상도표에서 하부조하대의 퇴적물은 밑짐과 뜬짐 2가지의 이동모드가 모두 나타나는 이중모드의 형태를 보인다.

Two kinds of oxide-dispersion-strengthened (ODS) 316L stainless steel were manufactured using a wet mixing process(wet) and a mechanical alloying method (MA). An MA 316L ODS was prepared by a mixing of metal powder and a mechanical alloying process. A wet 316L ODS was manufactured by a wet mixing with 316L stainless steel powder. A solution of yttrium nitrate was dried after being in the wet 316L ODS alloy. The results showed that carbon and oxygen were effectively reduced during the degassing process before the hydroisostatic process (HIP) in both alloys. It appeared that the effect of HIP treatment on increase in impact energy was pronounced in the MA 316L ODS alloy. The MA 316L ODS alloy showed a higher yield strength and a smaller elongation, when compared to the wet 316L ODS alloy. This seemed to be attributed to the enhancement of bonding between oxide and matrix particles from HIP and to the presence of a finer oxide of about 20 nm from the MA process in the MA 316L ODS alloy.

Austenitic oxide-dispersion-strengthened (ODS) stainless steel was fabricated using a wet mixing process without a mechanical milling in order to reduce contaminations of impurities during their fabrication process. Solution of yttrium nitrate was dried after a wet mixing with 316L stainless steel powder. Carbon and oxygen contents were effectively reduced by this wet processing. Microstructural analysis showed that coarse yttrium silicates of about 150 nm were formed in austenitic ODS steels with a silicon content of about 0.8 wt%. Wet-processed austenitic ODS steel without silicon showed higher yield strength by the presence of finer oxide of about 20 nm.

The introduction and application of IT(Information Technology) to a company has become to be viewed as a key factor for the business competitiveness and improved productivity. This study presents an approach to evaluation of a company's informatization le

공장 폐수로 인한 오염이 심한 경기 시화호에서 오염정도가 다른 두 지역으로부터 풀망둑을 채집하여 이들의 해독효소계 또는 항산화효소계의 반응을 비교하였다. 해독효소계에서 I상효소로는 CYP, P450R, b5R, EROD를, II상효소로는 GST를 조사하였다. 그리고 항산화효소계로는 CAT, GR, CPx의 활성 그리고 GSH및 CSSG농도를 조사하였다. 그 결과, 오염정도가 심한 지역에서 잡은 어류가 간장 중 P450R, b5R, GST의 활성이 높았으