Background: This study was conducted to acquire basic information on the phenotypic and genotypic characteristics of the germplasm of Panax ginseng C. A. Meyer collected from China and Korea, and identify the variations that can be utilized in ginseng breeding programs. Methods and Results: Quantitative parameters were evaluated, and used to compare and analyze on genetic polymorphisms in the germplasm. The genetic characteristics and classifications were compared and analyzed for each character. Stem length followed a normal frequency distribution ranging from 15.5 ㎝ to 40.5 ㎝, with showing approximately 40% having a stem length of 20 - 30 ㎜. Stem diameters ranged from 2.7 ㎜ to 11.3 ㎜. Stem number per plant ranged from 1 to 3; approximately 50% had a single stem, and 45% had two stems. A non-normal frequency distribution was observed for petiole number, with approximately 60% of the germplasm having 3 - 5 petioles. Petiole length exhibited a normal frequency distribution, raging from 4.5 to 10.6. Petiole angle in the germplasm ranged from 28° to 89° and seedstalk length ranged from 5.6 ㎝ to 27.3 ㎝. Conclusions: The genetic polymorphisms identified by complete linkage clustering based on the quantitative characteristics of Panax ginseng C. A. Meyer collected from Korea and China were classified to 6 groups, namely I, II, III, IV, V, and VI with frequencies of 6.7%, 20.0%, 31.7%, 8.3%, 6.7%, and 26.7%, respectively.

The purpose of this study is determining the effects of flexural behavior of aramid fibers in ultra high performance concrete. The 10 kinds of aramid fibers with different length, diameter and twisting were used. The flexural behavior was determined by bending tests on specimens, which was prepared by mixing 1 % of volume fractions of aramid fibers into ultra high performance concrete mortar. Consequently, the load-displacement relationship curves were obtained by using the test results for each kinds of aramid. While the specimen that contains the small diameter of aramid fiber gives the strong flexural strength due to large contact area between the fiber and concrete matrix, that specimen by small diameter of aramid fiber does not guarantee the ductile behavior of specimen like the steel fiber. But the length and twisting of aramid fiber gives the ductile behavior of ultra high performance concrete flexural specimen.

Background : This study was carried out to survey the effect of IBA (indole-3-butric acid) concentration on root development characteristics in Viburnum dilatatum cuttings. Methods and Results : The cuttings were collected on July 28, 2016 from plants growing in Korea National Arboretum. Cuttings were treated with different IBA concentrations [0 (control), 10, 100, 1000, 2000 ㎎⋅L-¹] for 10 seconds. Rooting parameters (root number, the longest root length, root fresh weight, root dry weight, rooting percentage, and survival rate) were observed at 8 weeks after cuttings. Rooting percentage was 43, 33, 17, 47, and 40 % at 0, 10, 100, 1000, and 2000 ㎎⋅L-¹ of IBA, respectively. Root number (13.4) was highest under 1000 ㎎⋅L-¹ IBA. Root length (9.4 ㎝) and Root weight (fresh and dry) were highest under 1000 ㎎⋅L-¹ IBA. Conclusion : According to the results, 1000 ㎎⋅L-¹ IBA was the best treatment for increasing percentage rooting percentage and other root development characteristics of V. dilatatum cuttings.

Background : Clematis trichotoma is a deciduous climber belonging to the family Ranunculaceae. This study was carried out to survey the effect of shading levels on growth characteristics in Clematis trichotoma seedling. Methods and Results : Seeds were collected from plants growing in the Mt. Kariwang Jeongseon, Gangwon-do in October 2013, and they were sown to 96 cell plug tray filled with Peatmoss (TKS-2) soil at March, 2015. The experiment was performed with four different shading levels (0, 30, 60, 90%) at July, 2015. According to the experiment, plant height was the highest under 90% of shading. It was found that fresh weight and dry weight of clematis trichotoma were the highest under 90% of shading. The leaf number was the highest under 30% of shading. The leaf number decreased as the shading level increased. Root number and length were the highest under 90% of shading. Conclusion : According to the results, Clematis trichotoma seedling showed the highest growth under 90% shading.

Background : Scrophularia koraiensis is a herbaceous perennials belonging to the family Scrophulariaceae. This study was carried out to survey the effect of LED on root develop characteristics in Scrophularia koraiensis seedling. Methods and Results : Seeds were collected from plants growing in the Mt. Kariwang Jeongseon, Gangwon-do in September 2014, and they were sown to 128 cell plug tray filled with Peatmoss (TKS-2) soil at March, 2015. The experiment was performed with three different LED (Blue, Red, Blue + Red) at July, 2015. Morphological characteristics of root (total root length, root projet area, root surface area, root diameter and root volume) were analyzed with WinRHIZO software. Seedling root growth of scrophularia koraiensis was surveyed to be the highest at the Blue + Red LED in all measuring. Total root length was measured high in the order of Blue + Red, Red, Blue LED. Conclusion : According to the results, Scrophularia koraiensis seedling showed the highest root growth in Blue + Red LED.

This study was conducted to improve the postharvest storage techniques of managing and storing seeds, totest qualities and viabilities of the seeds and to examine the germination rate and the protein expression of Achyranthesjaponica Nakai. The seeds collected from different areas of Je-Cheon and Gwang-Ju were stored with different temperaturesand durations. Two plant growth regulators and two seed priming were treated to investigate their effect on the germinationrates and the days required for germination. The weight of one hundred seed collected in Gwang-Ju was heavier than thosein Je-Cheon. Seed length collected in Gwang-Ju was also longer about 5.12㎜ than those in Je-Cheon about 4.90㎜ andseed width was longer in Gwang-Ju than those in Je-Cheon. The rates of seed germination in two different collection areaswere higher about 2.9 to 13.0% in Gwang-Ju compared to those in Je-Cheon. Comparing its rates with the storing tempera-tures and durations, they were not clearly different in between 4℃ and 25℃ and they also were gradually decreased withgetting longer storing durations. The germination rates treated by plant growth regulators were higher with GA3 than thosewith Kinetin. The highest seed germination rate was appeared at 50 ppm of GA3. Comparing its rates with different seedpriming, they were relatively higher with KNO3 than those with PEG6000. In protein expression patterns between before thegerminating and after the germinating of seeds, more and clear bands were appeared in the seed after the germination com-pared to those before the germination of seeds, especially 10~20kDa. These results showing more and clear bands weremore clearly appeared in Gwang-Ju compared to Je-Cheon. Comparing the protein expression with plant growth regulatorsand seed primings, GA3 was better expression than those with Kinetin and KNO3 was better than those with PEG6000. Moreand clear bands were closely related to the germination rates of seeds and more detailed studies would be required.

본 연구는 강우, 지반 진동을 고려한 토사재해 발생위치 예측 모델 개발을 위한 기초 연구로 기존에 토사재해 위험도 예측에 사용되어진 결정론적 기법 모델(SINMAP, SHALSTAB, TRIGRS)을 실제 토사재해가 발생했던 현장에 적용하여 분석 과정 및 결과를 비교하여 각 모델별 특징을 분석하였다. 이를 위하여 검토지역을 경상남도 밀양시 상동면 신곡리 일대, 강원도 춘천시 신북읍 천전리 일대, 경기도 여주시 북내면 상교리 일대, 서울특별시 서초구 서초동 우면산 일대로 총 4곳을 선정하였으며, 토사재해 위험도 분석 결과, 각 모델 별로 정확도의 차이가 나타나는 것으로 분석되었다.

The effect of the metal oxide catalyst in the dimerization of waste vegetable oil was investigated. The high efficiency and recyclability has allowed different metal oxides to be used as catalysts in numerous synthetic reactions. Herein, clay, aluminum, titanium, calcium, magnesium and silicon oxide micro/nanoparticles are used in a Diels-Alder reaction to catalyze the production of the dimer acids. The metal oxides assist the electron transfers during cyclization to produce the desired product. Liquid chromatography mass spectroscopy (LC-MS) and gel permeation chromatography (GPC) were used to verify the production of dimer acids. For the confirmation of cyclization, compounds were analyzed using the nuclear magnetic resonance (NMR) spectroscopy. From the analysis, silylated or pristine clay showed its effectiveness as a catalyst in dimerization. Furthermore, alumina and alumina/silica composite showed successful performance in the reaction to yield cyclic dimer acids. These result suggested that metal oxides and montmorillonite might be used in synthesis of dimer acids for the recycle of waste vegetable oils.

This study was conducted to investigate the quality of seeds, the germination rates and the days required for germination, to examine the patterns of protein expressions during the germination and to improve the techniques of managing and storing seeds and viability of the seeds of Lithospermum erythrorhizon Sieb. et Zucc. After collecting and harvesting seeds, they were classified to white and brown colors of seed coat through testing their seed size, weight, and quality. The germination rates, the days required for germination, and the protein expressions were examined with different colors of seed coats, storing temperatures and durations by treating the different plant growth regulators and primings. One hundred seed weight of white color was heavier about 1.17 g than those of brown one about 0.81 g. The germination rates in white color of seed coat was higher, 3.05 ~ 5.75%, than those in brown one. Its rates were decreased with getting longer in storage durations. There was no big differences on germination rates between storage temperatures. The plant growth regulator of GA3 and Kinetin was affected to improve the seed germination. GA3 increased the seed germination clearly at 25 ppm level, while kinetin increased it gradually from 25 to 100 ppm levels. In germination by seed primings, PEG6000 made higher germination rate with increasing their levels, whereas KNO3 increased the germination until 100 mM level and then decreased it with 200 mM unlike PEG6000. The protein expressed during the seed germination were appeared more and clearer bands in the seed after germination, especially 20 ~ 30 kDa, compared to those in the seed before germination. These results showing more and clearer bands were positively related to the germination rates which were different by seed colors, storage temperatures and durations, and plant growth regulators and primings.

For the seismic performance assessment of a building, a lot of time and manpower are needed. In this paper, alternative procedure based on modeling transformation for the effective seismic performance assessment of the buildings is suggested. The suggested procedure is applied for the seismic performance assessment of an apartment building consisted of the ordinary reinforced concrete shear walls as the example model and its effectiveness is reviewed

Hepatocellular carcinoma (HCC) is the fifth most common cancer and the third leading cause of cancer-related deaths worldwide. The radiologic findings of liver abscess, HCC, and metastatic tumor to the liver may be quite similar, and a specific diagnosis cannot be made using procedures such as serum tumor marker assay, computerized tomography, and ultrasonography of the liver. We report on a case of HCC successfully diagnosed and treated by surgery which was misconceived as a liver abscess.