E 499524'(적색), 'E 499526'(황색) 및 'E 499531'(주황색) 3 품종(Enza Zaden, The Netherlands)의 소과형 파프리카를 이용하여 여름철에 코이어배지경으로 시험을 수행하였다. 양액공급은 오전 7시부터 오후 4시까지 TDR센서를 이용하여 공급하였으며 배지 내 함수량(관수개시점)을 생육단계별로 설정하였다. 초장은 배지함수량이 높을수록 길었으며 품종 간에는 '적색', '황색', '주황색' 순이었다. 평균과중은 배지함수량이 많을수록 무거웠으나 품종 간에는 차이가 없었다. 주당 착과수는 함수량이 높을수록 많았으며 품종 간에는 '적색', '황색', '주황색' 순이었다. 상품수량은 배지함수량이 높을수록 증가하였고 배지함수량 55~65~60% 처리에서 가장 많았으며 품종 간에는 '적색' 품종이 8,348kg/10a, '황색' 품종이 6,916kg/10a, '주황색' 6,916kg/10a, 순으로 많았다. 과실의 당도는 배지수분 함량이 적을수록 높았으며 품종 간에는 '주황색'이 7.8~9.3˚Brix로 가장 높았다. 과육의 두께는 배지 수분함량 간에는 차이가 없었으나 품종 간에는 '황색'이 가장 두꺼웠다. BER, 과병무름증 및 일소과 발생율은 배지함수량이 많을수록 낮았으며 품종 간에는 차이가 없었다. 이상의 결과에서 여름철 소과형 파프리카 수경재배 시 코이어 배지의 관수개시점을 정식부터 제1그룹 착과까지는 55%, 제1그룹부터 2그룹수확까지는 65%, 제3그룹착과 이후부터는 60%로 설정하는 것이 가장 좋은 것으로 판단되었다.

한국의 중부에 위치한 평창, 영월 지역은 석회암 지역이며 생물지리학적으로 매우 중요한 지역이다. 2010년 3월부터 10월까지의 조사로 평창, 영월 지역의 식물상을 밝혀 석회암 지역 식물 연구의 기초자료로 활용하고자 한다. 이 지역의 식물상은 134과 503속 1,010종 11아종 110변종 10품종 4잡종의 1,145분류군으로 확인되었다. 환경부 법적보호인 멸종위기야생식물은 7분류군이며, 한국고유종은 50분류군이었다. 식물구계학적특정식물은 238분류군으로 5등급 24분류군, 4등급 30분류군, 3등급 60분류군, 2등급 45분류군, 1등급 79분류군으로 나타났다. 귀화식물은 82분류군이었으며, 본 조사지에서 다른 지역에 비해 특이하게 분포하는 식물은 53분류군이 확인되었다. 이 중 석회암 지역에서만 분포가 확인되는 식물은 35분류군이며, 격리되어 분포하는 북방계 식물은 15분류군, 해안성 식물은 3분류군이었다.

Zinc oxide as an optoelectronic device material was studied to utilize its wide band gap of 3.37 eV and high exciton biding energy of 60 meV. Using anti-site nitrogen to generate p-type zinc oxide has shown a deep acceptor level and low solubility. To increase the nitrogen solubility in zinc oxide, group 13 elements (aluminum, gallium, and indium) was co-added to nitrogen. The effect of aluminum on nitrogen solubility in a 3×3×2 zinc oxide super cell containing 72 atoms was investigated using density functional theory with hybrid functionals of Heyd, Scuseria, and Ernzerhof (HSE). Aluminum and nitrogen were substituted for zinc and oxygen sites in the super cell, respectively. The band gap of the undoped super cell was calculated to be 3.36 eV from the density of states, and was in good agreement with the experimentally obtained value. Formation energies of a nitrogen molecule and nitric oxide in the zinc oxide super cell in zinc-rich conditions were lower than those in oxygen-rich conditions. When the number of nitrogen molecules near the aluminum increased from one to four in the super cell, their formation energies decreased to approach the valence band maximum to some degree. However, the acceptor level of nitrogen in zinc oxide with the co-incorporation of aluminum was still deep.

여름철 파프리카 2품종 'Special'과 'Cupra'를 이용하여 코이어 배지 수경재배시 양액공급방법은 오전 7시부터 오후 4시까지 TDR센서를 이용하여 공급하였으며 배지 내 함수량(관수개시점)을 생육단계별로 설정하여 처리하여 다음과 같은 결과를 얻었다. 초장은 두 품종 모두 배지함수량이 높을수록 길었으며 'Special' 보다 'Cupra' 품종이 긴 경향이었다. 평균과중은 배지 함수량과 배지종류 간에는 차이가 없었으나 'Special'품종이 153~164g으로 'Cupra' 품종보다 무거웠다. 주당 착과수는 함수량이 높을수록 많았으며 'Cupra' 품종이 'Special'보다 많은 경향을 띄었다. 상품수량은 배지함수량이 높을수록 증가하였고 배지 함수량 I(55-65-60%) 처리가 'Cupra' 품종이 7,247kg/10a, 'Special' 품종이 6,837kg/10a으로 가장 많았다. BER, 꼭지무름증 및 일소과 발생률은 배지함수량이 많을수록 낮았으며 'Cupra'가 'Special' 품종보다 낮았다. 꼭지무름과의 질소함량은 과실 및 꼭지에서 정상과보다 적었으나 여타 무기성분 함량은 차이가 없었다. 이상의 결과에서 관수개시점을 정식부터 제1그룹 착과까지는 55%, 제1그룹부터 3그룹수확까지는 65%, 제4그룹착과 이후부터는 60%로 설정하는 것이 가장 좋은것으로 판단되었다.

In this paper, low birth rate due to aging in adramatic increase in the older population diversified modern social welfare services to meet the demand of the Ubiquitous Network approach to the introduction of social welfare through feasibility studies, modern social welfare facilities for the operation of the future direction and development of alternative to evaluate the present

The concrete mixer truck which is in charge of raw materials in civil engineering construction of the concrete loading, transport, placement, is used 6m3, 7m3 class in domestic(Korea). But in the case of the international construction fields are utilized 9m3 or above class because of the large-scale engineering and construction circumstances. In this paper, to develop a large 9m3 class mixer drum and the mixer drum in order to complement the technical and discharge that is responsible for stirring the blades by applying optimal design through implementation of the optimal shape of the concrete in the drum maintenance and placement of high-quality effects on increasing discharge such as advanced conventional drum mixer is to secure and differentiated technology. Large, heavy weight in development and uphold the drum mixer vehicle sub-frame is required to settle the design of the existing class mixer drum frames per 6m3 changed to account for changes in slope and length using CATIA V5 3D modeling work was performed.

The aim of this study was to develop a standard to estimate safety factors of corrugated fiberboard containers used for agricultural products. This study is limited to fresh agricultural products packaged in the corrugated fiberboard containers and further work needs to be done, but we believe the data and results obtained by this research will greatly help to set proper package design for boxes. Especially, safety factor would be practically helpful for researchers for future study and packaging users to save packaging costs.

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as -50℃~+85℃. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form -50℃ to +85℃ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best CO2 reduction Green product.

We studied the initial reaction mechanism of Zn precursors, namely, di-methylzinc (Zn(CH3)2, DMZ) and diethylzinc (Zn(C2H5)2, DEZ), for zinc oxide thin-film growth on a Si (001) surface using density functional theory. We calculated the migration and reaction energy barriers for DMZ and DEZ on a fully hydroxylized Si (001) surface. The Zn atom of DMZ or DEZ was adsorbed on an O atom of a hydroxyl (-OH) due to the lone pair electrons of the O atom on the Si (001) surface. The adsorbed DMZ or DEZ migrated to all available surface sites, and rotated on the O atom with low energy barriers in the range of 0.00-0.13 eV. We considered the DMZ or DEZ reaction at all available surface sites. The rotated and migrated DMZs reacted with the nearest -OH to produce a uni-methylzinc (-ZnCH3, UMZ) group and methane (CH4) with energy barriers in the range of 0.53-0.78 eV. In the case of the DEZs, smaller energy barriers in the range of 0.21-0.35 eV were needed for its reaction to produce a uni-ethylzinc (-ZnC2H5, UEZ) group and ethane (C2H6). Therefore, DEZ is preferred to DMZ due to its lower energy barrier for the surface reaction.

Adsorption of a water molecule on a Si (001) surface and its dissociation were studied using density functional theory to study the distribution of -OH fragments on the Si surface. The Si (001) surface was composed of Si dimers, which buckle in a zigzag pattern below the order-disorder transition temperature to reduce the surface energy. When a water molecule approached the Si surface, the O atom of the water molecule favored the down-buckled Si atom, and the H atom of the water molecule favored the up-buckled Si atom. This is explained by the attractions between the negatively charged O of the water and the positively charged down-buckled Si atom and between the positively charged H of the water and the negatively charged up-buckled Si atom. Following the adsorption of the first water molecule on the surface, a second water molecule adsorbed on either the inter-dimer or intra-dimer site of the Si dimer. The dipole-dipole interaction of the two adsorbed water molecules led to the formation of the water dimer, and the dissociation of the water molecules occurred easily below the order-disorder transition temperature. Therefore, the 1/2 monolayer of -OH on the water-terminated Si (001) surface shows a regular distribution. The results shed light on the atomic layer deposition process of alternate gate dielectric materials, such as HfO2.

Na+ ion conductivity can be improved by the substitution of an Mg atom for an Al atom to form a nonstoichiometric Na+ β-alumina. We performed a first principles study to investigate the most stable substitution site of an Mg atom and the resulting structural change of the nonstoichiometric Na+ β-alumina. Al atoms were classified as four different layers in the spinel block that are separated by conduction planes in the nonstoichiometric Na+ β-alumina. The substitution of an Mg atom for an Al atom at a tetragonal site was more favorable than that at an octahedral site. The substitution in the spinel block was more favorable than that close to the conduction plane. This result was well explained by the volume changes of the polyhedrons, by the standard deviation of the Mg-O distance, and by the comparison with bulk MgO structure. Our result indicates that the most preferable site for the Mg atom was the tetrahedral site at the spinel block in the nonstoichiometric Na+ β-alumina.

본 연구는 붉은꽃인동덩굴의 적심높이(60, 120, 180 cm) 가 가지길이, 측지수 및 피복에 미치는 적심높이별 영 향을 알아 보기 위하여 수행하였다. 인동덩굴의 줄기길 이는 고절위(180 cm) 적심이 저절위(60 cm) 적심보다 길 었고, 측지수는 저절위 적심이 고절위 적심보다 많았다. 그러나 분지수는 적심처리간에 큰 차이가 없었다. 퍼골라 벽면의 피복도는 저절위 적심이 85%, 중절위 적심이 74%, 고절위 적심이 62%를 보였다. 개화는 5월 중순부터 10월 중순까지 계속되었고, 첫 개화는 60 cm 적심이 5월 중순으로 가장 빨랐다. 대체로 적심 높이가 낮고 적심시기가 빠를수록 개화가 빨랐고, 개화최성기는 8월 중순이었다. 붉은꽃인동덩굴을 이용한 퍼골라 벽면의 가로 3.0 m ×높이 2.2 m 녹화를 하기 위해서는 퍼골 라당 6주(1m당 2주)를 재식하고, 60 cm 벽면 높이에서 1회 적심하면 당년에 85%의 벽면스크린 및 녹화가 가 능하였다.

Density functional theory was utilized to investigate the growth of an indium nanowire on a Si (001) buckled surface. A site between the edge of two Si dimers is most favorable when the first In atom is adsorbed on the surface at an adsorption energy level of 2.26 eV. The energy barriers for migration from other sites to the most favorable site are low. When the second In atom is adsorbed next to the first In atom to form an In dimer perpendicular to the Si dimer row, the adsorption energy is the highest among all adsorption sites. The third In atom prefers either of the sites next to the In dimer along the In dimer direction. The fourth In atom exhibited the same tendency showed by the second atom. The second and fourth In adsorption energy levels are higher than the first and third levels as the In atoms consume the third valence electron by forming In dimers. Therefore, the In nanowire grows perpendicular to the Si dimer row on the Si (001) surface, as it satisfies the bonding of the three valence electrons of the In atoms.