We have extracted the natural pine-needles to use ethanol in solvent, and could obtain the refined oil component from pine-needles extract. We have tested the antimicrobial effect from microbe experiment and analyzed with ICP/OES, GC/MS. we could obtain the next conclusion from the result of this experiment. In the first result of this experiment we could know that in case of increasing concentration of pine-needles, the number of microbe decreased more and more. Also we could know that the refined oil component of pine-needles appeared the sterilization effect of S-aureus and E-coli after 96hrs and 120hrs. So we could know that the refined oil component of appeared effect to microbe. In the second result of this experiment we could know that inorganic materials of Ca, Mg, V, Mn etcs from pine-needles detected to ICP/OES analysis and the aromatic compounds from refined oil component of pine-needles was certificated to GC/MS analysis.

The adsorption of heavy metals in the waste water carried out on the various domestic clays and waste pottery. The effect of parameters such as pH, temperature, adsorption time and coexisting cations on the adsorption ability and characteristics were investigated to find out whether the clays could be used as adsorbents. Adsorption equilibrium was reached within 20 minutes on all the clays. The optimum pH was found to be above 5. When other cations such as Cu(II) or Zn(II) coexisted with Pb(II), the adsorption amount of Pb(II) decreased because of competing adsorption.

According to increase of using quantity, people interested in the environmental influence by synthetic detergent. The main visible form when synthetic detergent dissolved in water is generating foams. This foam makes coating over water surface and prevents oxygen penetrating in water and make water more polluted with that result. To analyze, components and origins of the foam, and to make clear its environmental influence in this study. The analyzing objects are introducing water of sewage treatment plant from the a tributary to the Han River. After analysis, reached the conclusion like below, Analyzing foams and introducing water by sublation method, average return rate of standard LAS (1.0ppm) is 90%. LAS contents of foams analyzed by UV photometric method and HPLC method are 35.0ppm and 44.5ppm each, and AOS contents of foams analyzed by the same method are 0.6ppm and 0.4ppm each. We can find out by this study's analyzing results that the main components of foams are anion surfactant, it's content and in case of capric acid linoleic acid, it's contents.

Zirconium nitride powders were synthesized at a relatively lower temperature using methane as a reducing agent in the nitridation of zircoia. ZrO2 powder was prepared by a sol-gel technique. The resulting sol-gel was centrifuged, and the gel was washed with deionized water. Anhydrous ammonia was used as the nitrogen source and methane was used as the reducing agent. Conversion diagrams show the equilibrium solid phase as a function of reagent concentrations for a specific temperature and gas pressure for the reagent system NH3-ZrO2-CH4. The reagent concentration ranges within which pure ZrN is formed increase with increasing reaction temperature. Low pressure with an excess of hydrogen decreases the reaction temperature at which pure ZrN is formed. Low pressure together with the introduction of excess hydrogen into the reaction system increases Zr and N conversion efficiency and retards C deposition.

Extraction of Natural Artemisia by using super critical carbon dioxide is operated under 40-50℃ and 200-250 atm, thus, conversion rate is very low as 7wt% while high energy is being wasted. When Natural Artemisia Extract is applied in the control of microbe, concentration and reaction time greatly affected to the growth of microbe. Especially, when refined oil concentration from Natural Artemisia added more than 1,000ppm, staphylococcus aureus and fungi are terminated completely. Thus, it is proven that Natural Artemisia Extract has antimicrobial effect.

Garlic extract using super-critical carbon dioxide is influenced by temperature and pressure, and the optimum condition can make under super-critical state. We can know the defects in process of super-critical extration, It can indicate the drop of product rate, energy loss and equipment expense etcs. The minimum inhibition concentration of microbe which garlic extract contains has apperared the concentration more than 800ppm in this experiment. According to the result of this experiment, we can know that the antibiosis effect in the microbe of staphylococcus and fungus has disappeared in the incubation time more than 12 hours.

The liquid body foam which added the garlic extract, differs for clothes and kitchen detergent, industrial and domestic detergent, and it has various characteristics as a soft detergent for bath and hair product. The contents of various characteristics in this experiment have tested for the foam formation force, the moisture force and the antimicrobial force. In case of this product adding garlic extrat, we could know the three characteristics. In first case to increase the concentration of Sunfom-S, we could know that the foam formation force increases following to it. In second case to increase the concentration of propylene glycol, we could know that the moisture force increases following to moisturing agent. In third case to increase the concentration of garlic extract, we could know that the antibiosis and preservation efficacy appears between 3.0-4.0wt% and the sterilization efficacy appears more than 5.0wt%. According to the result of this experiment, we could recognize the characteristics concerning to quality of this product.

Theoretical model has been studied for the transport phenomena of molecules in the system where an electric potential is applied to the system in the axial direction. The effect of electrophoretic convection in the polymeric media is significantly contributed to separate large ionic-molecules because the conformation of large ionic-molecule quickly orients in the field direction. The dependence of the transport in the polymeric media upon field intensity and molecular size aids in understanding the transport of large ionic-molecule in the system, since the convective velocity of large ionic-molecule is accelerated inside a porous material. The transport distance of individual large ionic-molecule can be predicted using the reptation theories.

The influences of fluorophor, scatterer, and absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength. The molecular properties have been studied by laser induced fluorescence spectroscopy in phantom. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(μa, μa, μt). Experimental and Monte Carlo Simulation method for modelling light transport in tissue was applied. The experimental results using a phantom were discussed and compared with those obtained through Monte Carlo Simulation. It may also aid in designing the best model for oil chemistry, medicine and application of medical engineering.

In this study, the relation of the preservation efficacy reduction with methyl paraben of parahydroxybenzoic acid derivatives was investigated using the dialysis membrane method with tween-80 of surfactant and TiO2/Talc of inorganic powder meterial from emulsion system. It was found that the preservation efficacy of tween-80 and TiO2/Talc from emulsion system was reduced due to the adsorption of methyl paraben. According to the microbe test, In case of tween-80, MBC appeared in 0.19 w/v% and in case of TiO2/Talc, MBC appeared in 0.22w/v% / 0.23w/v%. In general, the equation of Talc's adsorption weight(A·W) has a tendency to show in A·W=11.5C0.745

The natural body foam product which palm oil is added to this product, differs from products for clothes and Kitchen detergent, industrial and domestic detergent, and It has a various characteristics as a soft detergent for bath and hair product. Up to now, vidal sassoon product which imports form overseas and sells in our country, increases every year in consumption quantity. The development of this product tested to consider the quality of product in the effect of import transfer. First of all, the experiment of this product tested the fundamental items of pH, foam formation force, the moisture effect of product, the biodegradation degree of product. In case of palm oil, when it was added to this product in 0.25wt%, we could get experiment results that pH appeared in 6.2, foam formation force in product 1wt% solution appeared in 104ml per 30sec, the skin moisture effect of product appeared in incleasing from 82 a.u to 90 a.u within one hour since we have used the product, the biodegradation degree of surfactant appeared in 96.7%. According to the experiment result of product, we could know the fact that it has a high quality in comparison with other products.

The propagation of light radiation in a turbid medium is an important problem that confronts dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. Scattered light is measured as a function of the position(distance r, depth z) between the axis of the incident beam and the detection spot. Turbid sample yields a very forward-directed scattering pattern at short range of position from source to detector, whereas the thicker samples greatly attenuated the on-axis intensity at long range of position. The portions of scattered light reflected from or transmitted throughphantom depend upon internal reflectance and absorption properties of the phantom. Monte Carlo simulation method for modelling light transport in tissue is applied. It uses the photon is moved a distance where it may be scattered, absorbed, propagated, internally reflected, or transmitted out of tissue. The photon is repeatedly moved until it either escape from or is absorbed by the phantom. In order to obtain an optimum therapeutic ratio in phantom material, optimum control the light energy fluence rate is essential. This study is to discuss the physical mechanisms determining the actual light dose in phantom. Permitting a qualitative understanding of the measurements. It may also aid in designing the best model for laser medicine and application of medical engineering.

Isothiazoline derivatives is widely used to food, medical drug and industrial goods, cosmetics etcs, and it makes to restrain and to sterilize a breeding of microbe as a preservative and a sterilizing agent. It differs with the raw material of paraoxybenzoic acid derivatives or imidazolydinyl urea to be in use at present, on the efficacy and effect, and has various characteristics. This synthesis makes 3,3'-dithiodipropionic chloride to add a thionyl chloride in 3,3'-dithiodipropionic acid, and 3,3'-dithiodipropionic methyl amide makes to synthesize in a reflux reaction the mono methyl amine to 3,3'-dithiodipropionic chloride. And last synthesis becomes to make chlorination-cyclization molecule doing a reflux reaction in the temperature of 90~100℃ to mix excessively thionyl chloride and ethylene dichloride to 3,3'-dithiodipropionic methyl amide. The last synthesis material has got in the mixture of 5-chloro-2-methyl-4-isothiazoline-3-one and 2-methyl-4-isothiazoline-3-one, and it is so-called isothiazoline derivatives. The purification of isothiazoline derivatives makes to fuse in ethyl acetate, and makes to decolorize and to deodorize in recrystallization. This experiment has been in synthesis and purification of isothiazoline derivatives, and has tried to measure on the antisepsis and sterilization function of microbe according to pH or content change.

It is the problem point of stability for this study to produce cosmetics and to occur in the circulation process, and specially in a case of alcoholic toilet water the precipitation materials to float on content materials has study on the solubility of perfume, and it has practiced in order to examine the problem point whether the raw materials of plastic vessel is or not harmful in content materials. In testing result, A study on stability of alcoholic toilet water is above all the precipitation materials which floats in content materials, and It is appeared by combination ratio to the raw materials of perfume, ethanol, solubilizer and refining water etcs, and in second the alkali degree which has gushed out of glass vessel can understand the thing that the change of PH is largely increased following to the passage of time, and in third the harmful component of content materials out of raw material in plastics vessel must certainly consider a stability and a safety in quality control of products.

Thermograms of methylene blue(MB) in L-α-lecithin vesicle and incorporated purple membrane vesicle(InPM) systems have been studied by photochemical reaction differential scanning calorimetry at 25~55℃. Phase transition temperatures of lecithin vesicle, purple membrane(PM), and InPM were found to be independent of illumination of light(436nm) at 39~40℃, but endothermic phase transition was found in InPM vesicle. In MB-InPM system, endothermic phase transition was found on unillumination of light at 40~42℃, but exothermic phase transition was found on steady illumination of light at 48~52℃. It was estimated that the light energy absorbed from MB on vesicular surface was transferred to PM, and the transferred energy was redistributed to hydrophobic site of membrane. Therefore, the exothermic phase transition was measured at high temperature because of the increased hydrophobicity of acyl chain.

The excess volumes of mixing of benzyl alcohol, ethyl alcohol, halothane, and procaine in vesicle and suspensions of several lipids have been determined at 25℃ using a excess volume dilatometer. The potency of general anesthetics has long been known to be correlated with lipid solubility. Denaturations of the bacteriorhodopsin, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by UV/Vis absorption changes. The excess volumes of mixing of benzyl alcohol and procaine in egg lecithin were all found to be negative and this result was confirmed as Miller's supposition.

The influences of fluorophor, scatterer, absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it has been studied the molecular properties by laser induced fluorescence spectroscopy. It has been found that the effects of optical properties in scattering media by the optical parameters(μs, μa, μt). The value of scattering coefficient μs is large by means of the increasing particles of scatterer, it has been found that the slope decays exponentially as a function of distance from laser source to detector. It may also aid in designing the best model for oil chemistry, laser medicine and application of medical engineering.

The Kinetics velocity for hydrolysis reaction of vanillylidene imine derivatives has been measured by ultra-violet ray spectrophotometer in 20wt% dioxane-H2O at 25℃. It was measured the reaction rate Constant of vanillylidene imine derivatives that can be applied widely following to pH-change at 25℃. Final products that hydrolyzed the vanillylidene imine certified in vanillin and aniline derivative, and the effect of substitution radical that has affected on hydrolysis reaction was largely promoted to reaction rate by electron attrating group in acidity and electron donoring group in basic. From the results of rate constant to hydrolysis reaction, substituent radical effect and final products. It has certified the hydrolysis reaction mechanism of vanillylidene imine derivatives.

The kinetics of the addition of 1-benzylindole-3-(p-substituted) acetophenone derivatives was investigated by ultraviolet spectrophotometery in 30% dioxane -H2O at 25℃. A rate equation which can be applied over wide pH range was obtained. The Substituent effects on 1-benzylindole-3-(p-substituted) acetophenone derivatives were studied, and addition were facilitated by electron attracting groups. On the base of the rate equation, substituent effect, and general base effect the plausible addition mechanism was proposed : Below pH 3.0, only neutral thiourea molecule was added to the carbon-carbon double bond, and in the range of pH 0.0~14.0, netural thiourea molecule and thiourea anion competitively attacted the double bond. By contrast, above pH 10.0, the reaction was dependent upon only the addition of thiourea anion.