FePt nanoparticles for high-density magnetic recording media were synthesized by the simultaneous chemical reduction of Fe(acac) and Pt(acac) with 1,2-hexadecanediol as the reducing reagent. TEM images showed that the shape of as-synthesized FePt nanoparticle was spherical and average particle size was 3 nm. Also, SAD pattern showed that crystal structure was disordered FCC (face centered cubic). These FCC structured nanoparticles were transformed FCT (face centered tetragonal) structure by annealing at 55 for 30 min in Ar atmosphere. XRD analysis revealed that as-synthesized FePt nanoparticles were transformed from disordered FCC to ordered FCT. Finally, the coercivity of 2 kOe for FePt nanoparticles with FCT structure was obtained by VSM measurement.

본 실험은 한우 400두를 공시하여 사양조건에 따른 blood urea nitrogen(BUN)의 농도가 암소의 번식에 미치는 영향을 조사하였으며 또한 body condition score(BCS)가 번식효율에 미치는 영향을 조사하였다. 1 화본과 식물이 주종인 초지에서 방목을 하였을 때 BUN의 평균농도는 7.392.65 mg/㎗ 이었으며 발정이 육안적으로 확인된 암소의 58.2%가 4∼8 mg/㎗ 사이에 분포하였으며 수태율도 높은 경향을 보였다. 2

본 시험은 한우에서 연령에 따라 혈청성분들의 변화를 알아보기 위하여 한우 866두(거세 638, 비거세 228)에 대하여 혈청 농도를 분석하여 채혈시 일령을 독립 변량으로 하고 혈청 성분들을 종속변수로 하는 다항 회귀방정식으로 추정한 결과는 다음과 같다. 거세우나 비거세우 모두 같은 차수의 회귀방정식이 접합한 혈청 성분은 IGF- I (3차식) calium(1차식) 및 IP(1차식)이었고 거세우에서는 1차식이 적합하고 비거세우에서는 3차식이 적합한 혈청

혈액성분과 경제형질들 간의 상관관계를 규명하는 일은 한우의 능력을 예측하고 예견되는 능력에 맞추어 사양관리와 판매처를 결정할 수 있고, 기존의 종축선발 체계와 결합시킴으로서 선발의 정확도를 향상시킬 수 있는 효과를 기대할 수 있으므로 나름대로 중요한 의미를 갖는다. 본 연구는 축산기술연구소에서 사육하고 있는 한우 866두의 혈액 중 호르몬과 대사물질을 분석하여 혈액성분과 경제형질과의 표현형 상관관계를 분석하고 혈액 내 유용한 생리적인 형질을 발굴하여 능

Synthesis and characteristics of Cu nanopowder were considered by in-situ characterization method using SMPS in pulsed wire evaporation process. With increasing pressure in chamber, particle size and degree of agglomeration increased by increase of collision frequency. Also, it was found from the XRD analyses and BET measurements that crystallite size and particle size decreased with elevating applied voltage. However, SMPS measurements and TEM observation revealed the increase of particle size and degree of agglomeration with increase of applied voltage. These results suggested that particle growth and agglomeration depend on overheating factor in chamber at the early stage and thermal coagulation in filtering system during powder formation until collection.

nanopowder was synthesized by chemical vapor condensation (CVC) process and its photocatalytic property depending on microstructure was considered in terns of decomposition rate of organic compound. In order to control microstructure of nanopowder such as particle size and degree of agglomeration, precursor flow rate representing number concentration was changed as a process variable. In TEM observation, spherical nanoparticles with average size of 20 nm showed gradual increases in particle size and degree of agglomeration with increase of precursor flow rate. Also decomposition rate of organic compound increased with decreasing precursor flow rate. Thus, it was concluded that photocatalytic property was enhanced by targe surface area of disperse nanoparticles synthesized at lower precursor flow rate condition in CVC process

The synthesis and characteristics of W-Ni-Fe nanocomposite powder by hydrogen reduction of ball milled W-Ni-Fe oxide mixture were investigated. The ball milled oxide mixture was prepared by high energy attrition milling of W blue powder, NiO and for 1 h. The structure of the oxide mixture was characteristic of nano porous agglomerate composite powder consisting of nanoscale particles and pores which act as effective removal path of water vapor during hydrogen reduction process. The reduction experiment showed that the reduction reaction starts from NiO, followed by and finally W oxide. It was also found that during the reduction process rapid alloying of Ni-Fe yielded the formation of -Ni-Fe. After reduction at 80 for 1 h, the nano-composite powder of W-4.57Ni-2.34Fe comprising W and -Ni-Fe phases was produced, of which grain size was35nm for W and 87 nm for -Ni-Fe, respectively. Sinterability of the W heavy alloy nanopowder showing full density and sound microstructure under the condition of 147/20 min is thought to be suitable for raw material for powder injection molding of tungsten heavy alloy.