As a result of globalization process and TBT agreement, KS is also being revised, reestablished and some are abolished according to international standards such as ISO, IEC, etc. Conventional KS sampling inspection standards contained many different proce

The air bridge that connects an airplane with air terminal is important facilities that help people get in and out an airplane safely and conveniently. As the number of people who takes airplane has been increasing, an unexpected accident or a disorder on an air bridge can lead to the loss of passenger's lives or a great damage of airplane. This paper suggests a method to secure the safety of an air bridge.

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also End step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100 % inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0-3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100% inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0~3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

The purpose of the research is to discuss the product safety procedures for the food area. The producer and supplies of the products should be able to satisfy the needs of the increasing consumer safety. The products, for the purpose of developing and making safe products, must perform Hazard Finding and Risk Analysis to detect potential danger to mike sure the final safety measures are in place. The purpose of Product liability rests finally with the consumer safety and the manufacturer's capability compete in the marketplace. Especially this is important for the food industry. But, our domestic middle and small food industries, it is relatively weak in this are. Thus this research would like to present a easily usable product safety procedures.

As a result of globalization process and TBT agreement, KS is also being revised, reestablished and some are abolished according to international standards such as ISO, IEC, etc. Conventional KS sampling inspection standards contained many different procedures from ISO, but recently, to match with international standards, all the rest of the standards except KS A 3102, 3104, 3151 were abolished, and the even the ones being in use still are also scheduled and be revised. Especially, KS A 3101, KS A 3105, KS A 3109, which were used most frequently in Korea were abolished, and the KS A ISO 2859-0~3 which coincide with ISO standards were established 3 years ago, but the implementation rate is very slow. Starting next year the national examination for qualification process for the product quality related item will the started and the preparation is underway. This study will investigate the recent sampling inspection process of KS as well as SPC related KS overhaul problem and present the data to help workers in SPC related field. One of the main example will be on KS A ISO 2859-3 and will attempt to help those medium and small sized companies with examples.

The trends in building construction these days are moving towards having better work space and greater suitability for the use of information technology, Therefore people can work in a more relaxed, delightful and pleasant environment. So accidents like fire could cause the mass destruction of human beings. In this paper, we estimated the escape time from a building and simulated the study results on computer to see how safe it would be in a real situation.

In this study, it was researched a kind of the press machines which had been retained in the domestic press working companies. And then it was analyzed the present conditions with the working types, companies size, the aging types and the continuous working periods. Specially, the purpose of this paper is decreased the industrial accidents of the domestic press working companies by the proposing the safe prevention which are obtained by the analysing the accidential reasons.

In this study, it was researched a kind of the press machines which had been retained in the domestic press working companies. And then it was analysed the present conditions with the working types, the size of companies, the aging types and the continuous working periods. Specially, the purpose of this paper is decreased the industrial accidents of the domestic press working companies by the proposing the safe prevention which are obtained by the analysing the accidential reasons.

In this paper, computer simulation was used for researching into the estimate of flash over result from compartment fire and the characteristics operation of sprinkler RTI. Computing simulation, we analyzed and verified the path of the flame in compartment fire and the adaptation of sprinkler system concerned with sprinkler RTI.

The purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related system(security) standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestic biometrics industry based on the suggested standards.

The purpose of this study is to carry out comparative analysis of the differences between the trend of biometrics-related product standardization in the world and that of Korea, and to suggest ideal directions and building plans for domestic biometrics industry. Its purpose also includes constructing promptly a standardization of domestic biometrics industry based on the suggested standards.

This paper describes "the remote automatic diagnosis and repair system which automatically reads the problems such as "out of order" occurred on equipment at customer's equipment from a remote computer center using HTTP(hyper text transfer protocol). It shows the scheme of the network configurations and features of the system. In addition, a way to implement the overall system, the specific functions of unit, and the operational specifications between the center's computer and customer's computer are also presented.also presented.

The purpose of this paper is to supply the principal methods for the safety in the press industrial accident preventions and the basic analyzing theory in the press industrial accidents. It was reached the press machine installed companys and was analyzed the accident characteristics, types, the worker's working period and the distributed worker's age of the happened the press machine industrial accidents. The direct reasons are almost reasons of the press industrial accidents. But it should be not ignore the indirect reasons of the accidents In this study, it was presented that the safety devices is selected by the amalyzed reasons in the press industrial accidents for the principal accident prevention.

These days, there are many companies who are concerned with "Safety Management System"", which enables them to not only evaluate their safety but also control and prevent the risk of accidents. As plenty of institutes are developing and providing it for companies in addition to testing its operation, such companies take that system into account in a very positive way. This paper makes it possible for our company to introduce an appropriate program into its workplace by comparing and analyzing such Safety Management Evaluation Systems.uation Systems.

The purpose of this paper is to supply the principal methods for the safety in the press industrial accident preventions and the basic analyzing theory in the press industrial accidents. It was reached the press machine installed companys and was analyzed the accident characteristics, types, the worker's working period and the distributed worker's age of the happened the press machine industrial accidents. The direct reasons are almost reasons of the press industrial accidents. But it should be not ignore the indirect reasons of the accidents In this study, it was presented that the safety devices is selected by the analyzed reasons in the press industrial accidents for the principal accident prevention.

These days, there are many companies who are concerned with "Safety Management System", which enables them to not only evaluate their safety but also control and prevent the risk of accidents. As plenty of institutes are developing and providing it for companies in addition to testing its operation, such companies take that system into account in a very positive way. This paper makes it possible for our company to introduce an appropriate program into its workplace by comparing and analyzing such Safety Management Evaluation Systems.n Systems.

Increased complexity of products and their manufacturing processing demans higher quality control and monitoring than ever before. Therefore, flexible automatization or flexible manufacturing systems (FMS) offer numerous advantages over alternative manufacturing methods. In this state, a in-process monitoring is one of the important flexible automatino system. And as use of NC and CNC machine tool has been increasing, cutting work has automating and it is necessary to develop the automatic production system combined a couple of machine tool. Thus, in this paper to search examination it can measure the tool wear and the tool life and can be more practical research subject.

Increased complexity of products and their manufacturing processing demans higher quality control and monitoring than ever before. Therefore, flexible automatization or flexible manufacturing systems (FMS) offer numerous advantages over alternative manufacturing methods. In this state, a in-process monitoring is one of the important flexible automation system. And as use of NC and CNC machine tool has been increasing, cutting work has automating and it is necessary to develop the automatic production system combined a couple of machine tool. Thus, in this paper to search examination it can measure the tool wear and the tool life and can be more practical research subject.