The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

Microstructural analysis of a (α+β) Ti alloy was investigated to consider phase transformation in each step of thethermo-mechanical process using by SEM and TEM EDS. The TAF (Ti-6Al-4Fe) alloy was thermo-mechanically treated withsolid solution at 880oC, rolling at 880oC and annealing at 800oC. In the STQ state, the TAF microstructure was composedof a normal hcp α and metastable β phase. In a rolled state, it was composed of fine B2 precipitates in an α phase, whichhad high Fe segregation and a coherent relationship with the β matrix. Finally, in the annealing state, the fine B2 precipitateshad disappeared in the α phase and had gone to the boundary of the α and β phase. On the other hand, in a lower rollingtemperature of 704oC, the B2 precipitates were more coarse in both the α and the boundary of α and β phase. We concludedthat microstructural change affects the mechanical properties of formability including rolling defects and cracks.

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructureand diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and thediffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific latticerelationship. The modulated structure may be induced by short distance slip or atom movement during a very short intervalof solution treated and quenched (STQ) materials. The athermal ω phase, which could be precipitated at low temperature aging,is also analysed by the metastable phase. The metastable phases including athermal ω phase had a common characteristic ofhardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atommovement at the metastable state.

The intracellular endosymbiont bacterium Wolbachia is currently considered the most abundant in arthropods and has also been isolated from nematodes, amphipods, isopods, mites and spiders. Recently, Wolbachia-based research was focused on the control of disease vector-population, such as several mosquitoes such as genus Aedes and Anopheles which cause dengue fever and malaria, respectively. For the analysis of regional difference between vector mosquito Aedes albopictus and Wolbachia, we selected different regions and collected Ae. albopictus which were distinguished with mountain chain and waterway. Whole genomic DNA were extracted from collected specimens with 9 regions. PCR analysis and sequencing were accomplished in each specimen for Wolbachia detection and identification using WSP gene. As a results, almost mosquitoes were infected with two strain of Wolbachia both wAlbA and wAlbB. However, regional separation of vector mosquitoes, wAlbA strain of Wolbachia were showed more than 98% sequence similarity. In this study, we first reported that Wolbachia infection and type of Wolbachia in Korea and endosymbiont Wolbachia was showed highly sequence homologies.

The intracellular endosymbiont bacterium Wolbachia is currently considered the most abundant in arthropods. Many Wolbachia manipulate host reproductive systems, it lead to male-killing, cytoplasmic incompatibility, parthenogenesis and feminization of genetic males with large impact on host ecology and evolution in arthropods. In this study, we investigated the distribution of Wolbachia infection in Ae. albopictus according to geographical distribution. We selected 9 areas and collected Ae. albopictus, these areas were distinguished with mountain chain and waterway. Whole genomic DNA were extracted from collected specimens and PCR analysis were accomplished in each specimen using Wolbachia specific primers such as 16S and WSP genes. As a results, we collected 730 Ae. albopictus at least 30 specimens in each area. Wolbachia infection rate showed different patterns between geographical region. Cheonbook, Cheonnam and Yeongdong showed 100% infection rate followed by Jeju (97%), Chungchung (88%), and Gyungnam (85%) with two Wolbachia marker genes. Our results indicated that Ae. albopictus are commonly infected with Wolbachia, it is possible that Wolbachia may act as endosymbiont in Ae. albopictus regardless of geographical region. Although, low infection rate of Wolbachia, we need continuous survey for the evaluation of Wolbachia strain within Ae. albopictus as a vector of dengue fever.

Habitats for migratory birds provide good blood source for blood sucking insects including mosquitoes, which may lead to high population mosquito species. This study was intended to know mosquito fauna in habitats for migratory birds that have preference for bird’s blood. We selected 7 locations for migratory birds (Ansan: a great reedy marsh in lake of Shihwa; Cheonan, Gyeongju, and Pyeongtaek: pine forest; Seosan: a reclaimed land near bay of Cheonsu ; Ulsan: great bamboo forest around Teahwa river) and subdivided each location with four habitats (forest, swamp, cow shed and downtown area) as mosquito collecting site. We used two types of trap for mosquito collection such as CDC black light trap and BG Sentinel trap. Additionally, we use black light and dry ice as an attractive source, respectively. A total of 27,615 mosquitoes representing 9 genera and 18 species were collected. In Ansan, 9 genera and 17 species were collected and in the other locations only 11 to 12 species. Representing by habitats shows this; in forest 9 genera and 17 species, in swamp 8 genera and 16 species, in cow shed 6 genera and 12 species, in downtown 8 genera and 17 species. The dominant species was Culex pipiens (60%) followed by Aedes vexans (11%), Anopheles spp. (8%), Aedes albopictus (7%), and Armigeres subalbatus (5%).

배관 내부의 방사성 오염도를 측정하기 위한 ZnS(Ag)/플라스틱섬광체 조합의 알파/베타선 동시측정용 phoswich 검출기를 개발하였다. 알파/베타선 동시측정용 phoswich 검출기의 오염위치에 따른 검출 성능을 PSD (Pulse shape discrimination) 방법을 이용하여 평가하였다. 또한, 검출기를 방사성 오염물질로부터 보호하기 위한 오염방지용 필름에 대한 방사선 감쇄 정도를 실험적으로 평가하였다. PSD 방법으로 알파/베타선 분리 정도를 측정한 결과 충분히 알파와 베타선이 분리되었으며 오염방지용 필름의 적용 가능성을 확인하였다.