주변 토지이용과 수질이 서로 다른 도시하천인 양재천(서울)과 산지하천인 사기막천(경기도)에서 부착조류 동태 파악을 위해 1996년 3월부터 1998년 10월까지 월별 및 격월별로 조사를 실시하였다. 양재천의 영양염류 농도는 총질소가 8.9 mg/l 총인이 0.42 mg/l로 사기막천 (총질소 농도: 1.9 mg/l, 총인농도: 0.13 mg/l)보다 3~4배 가량 높았다. 부착조류 생체량 역시 양재천에서 평균 62±67 mg/l로 평균 17±11 mg/l인 사기막천 보다 매우 높게 나타났다. 두 지점 모두 봄에 높은 생체량을 보였고 여름동안은 생체량이 낮은 것으로 조사되었으며 여름동안의 집중호우에 의한 탁류 유입 및 하상구조의 교란의 영향이 큰 것으로 나타났다. 양재천의 경우 전체 출현종 중 호오탁성종이 50.0%, 광적응성종이 48.8%를 차지하였고 호청수성종은 1.2%로 현저히 낮은 출현율을 나타내었다. 사기막천에서는 전체 출현종 중 호청수성종이 54.6%, 광적응성종이 44.6%, 호오탁성종은 0.8%의 출현율을 나타내어 양재천과는 대조적이었다. 조사기간 중 종조성 역시 양재천에서는 호오탁성종으로 분류되는 Navicula subminuscula과 Nitzschia palea가 사기막천에서는 호청수성종으로 분류되는 Achnanthes convergens와 광적응성종으로 분류되는 Cymbella minuta가 우점종으로 조사되어 큰 차이를 나타내었다.

자기공명영상검사는 조직의 대조도 와 해상력이 우수하지만, 인공물이 발생 될 경우 진단에 영향을 주어 판독이 불가능한 영상을 생성하기도 한다. 치아에 삽입된 금속은 강자성체 또는 상자성체로 되어있는 경우 가 대부분이며 자화율 차이로 인하여 기하학적 왜곡을 유발하여 영상진단에 저해되는 경우가 많으며 이를 저감시킬 필요가 있다. 이에 본 연구는 반자성 물질을 사용에 따른 금속 인공물 분석을 실시하고자 한다. 자성 물질로는 치아교정용 와이어와 브라켓인 스테인리스 스틸이 사용되었고 반자성 물질은 구리, 아연, 비스무트를 사용하였다. 검사장비는 1.5T, 3T가 사용되었으며 사용된 시퀀스는 SE, TSE, GE, EPI을 사용하여 측정하였다. 자체 제작된 팬텀을 물질은 균등한 신호를 위하여 아가로스 겔(10%)을 사용하였으며 인공물 유발 물질은 스테인리스 스틸은 팬텀의 정중앙에 위치시켜 검사하고 각 길이 10mm의 정 육면체 반자성 물질의 씌워 검사하였다. 인공물 측정은 Image J를 사용하여 순수한 팬텀 영상에서 자성물질을 포함한 영 상을 감산하여 얻은 영상에서 Low Threshold 값을 10으로 설정 한 후 Wand tool을 사용하여 인공물 영역 설정 후 면적을 구하였다. 스테인리스 스틸에서 발생한 금속 인공물은 반자성 물질 중 비스무트를 사용한 영상에서 금속 인공물이 가장 많이 감소하였으며 구리와 아연은 약간은 감소하지만, 그 정도의 차이는 크지 않다고 하겠다. 이러한 이유는 비스무트의 반자성 자화율이 가장 작아서 강자성체에서의 자화율을 가장 많이 상쇄하였기 때문이라고 생각된다. 1.5T 와 3T 모두에서 비스무트를 사용한 영상의 인공물이 가장 적 게 나왔다. 시퀀스별 인공물 감소는 1.5T에서는 TSE에서 가장 많이 인공물이 감소하였으며 3T에서는 SE에 서 가장 많은 인공물이 감소하였다. 따라서 반자성물질의 따른 인공물 변화의 결과는 자화율(χ)이 가장 낮은 비스무트를 사용한 영상에서 금속인공물이 기준인 Implant 인공물 보다 줄어든 양상을 보여 자화율이 낮은 물질일수록 금속 인공물이 줄어든다는 것을 알 수 있었으며, 기존 금속 인공물의 해결 방법의 단점으로 지적되어온 스캔 시간의 증가 등이 나타나지 않으면서도 인공물을 줄일 수 있는 방법으로 향후 치아 교 정 물질뿐만 아니라 치아 보철물 전체에 대한 금속 인공물 저감에 관한 연구의 기초 자료로 사용될 것으로 사료된다.

Background: The Rosa multiflora, a well-known plant belonging to Rosacea, is widely used in orthodox medicine in worldwide. However, its biological activity and cosmetic preservative efficacy have not yet been studied. Thus, this species is yet to be defined as a functional cosmetic material. Accordingly, an investigation of the above mentioned atrributes was performed on a 50% ethanol extract of Rosa multiflora. Methods and Results: The antioxidant activity was assessed through free radical scavenging assays with 2,2-diphenyl-1-picrylhydrazyl (DPPH). Additionally, the contents of total phenols and flavonoids were analyzed. The phenolic compounds were detected using HPLC. The antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Candida albicans was assessed using the disc diffusion assay. The preservative effect (challenge test) on a formulation of soothing gel was performed for 28days. The DPPH radical scavenging ability, denoted by the SC50 (half maximal inhibitory concentration for DPPH radical scavenging) value was found to be 131.63 ㎍/㎖. The content of total polyphenol and flavonoid content were 202 ㎎/g and 86.77 ㎎/g, respectively. In additon, astragalin and gallic acid were identified in the extract. The antimicrobial activity of the extract against S. aureus and E. coli was observed to be 5 - 0.5%, and no significant activity was noted against C. albicans. The ethanol extracts (5% and 10%) met the preservation standards of the Cosmetics, Toiletry, and Fragrance Association (CTFA). Conclusions: Thus the ethanol extract of R. multiflora can be used in cosmetics as a natural preservative and antioxidant.

의료수준의 향상과 더불어 환자들의 첨단의료장비에 대한 기대수준이 증가하고 있으며 특히 자기공명영상(Magnetic Resonance Image : MRI)은 현재 모든 임상 분야에서 가장 핵심적인 영상진단 도구로서 사용되고 있다. 그러나 검사 중에 발생하는 심각한 소음으로 많은 환자가 심리적인 불안을 경험한다고 한다. 이에 본 연구에서는 자기공명영상검사실의 기존 헤드셋 흡음재에서 차음재를 추가한 헤드셋의 소음저감평가와 차음재별 영상 아티팩트(artifact) 유무를 알아보고자 하였다. 3D 프린팅한 헤드셋 내부에 흡음재(스펀지)와 차음재(아크릴판, 구리판, 3D copper plate)를 교차 배열하여 MRI 검사소음을 녹음하여 스피커로 같은 dB 값의 소음을 발생시키며 3D 프린팅 된 두부모형의 내부에 소음측정기로 dB 값을 측정하여 정량분석을 하며 자체 제작한 헤드셋을 물팬텀에 밀착시킨 후 MRI영상 아티팩트 유무를 검사한다. 드셋의 정량평가를 한 결과, 헤드셋 평균 dB 값은 81.8 dB 로 나타났으며, 차음재를 추가한 헤드셋에서 가장 방음효과가 뛰어난 재료조합(구리, 아크릴판, 스펀지, 스펀지) 헤드셋의 평균 dB 값은 70.4 dB 값이 측정되었지만 MRI 시뮬레이션 결과 구리가 반자성체이기 때문에 아티팩트가 나타나 배제하였고 두 번째로 방음효과가 뛰어난 (스펀지, 아크릴판, e-copper plate, 스펀지) 헤드셋의 평균 dB 값은 70.6 dB 값이 측정되었고 MRI 시뮬레이션 결과 인공물 나타나지 않았다. 구리분말이 약 40%가 포함된 e-copper PLA로 출력한 재료를 동일하게 시뮬레이션을 한 결과 인공물 나타나지 않았으므로 3D 프린팅 재료의 사용이 적합하였고 구리보다 경제성이 우수하며 가공이 용이하므로 적합한 재료로 선정하였다. MRI관련 연구에 있어 3D 프린팅을 이용한 상호발전이 매우 기대된다.

Background : The purpose of this study was to evaluate methods to high quality food ramie rice cake, thereby increasing farm income. This study investigated the effects of different Split Application and Adapted Fertilizer Culture for Stable Production with Edible Leaf in Ramie (Boehmeria nivea L.). Methods and Results : Method of fertilizer application were conducted under three condition compose to standard application (N-P-K-Compost applied at 27-9-27-1,500 ㎏․ 10 a−1), 25% increased application (N-P-K-Compost applied at 34-11-34-1,500 ㎏․10 a−1), 50% increased application (N-P-K-Compost applied at 41-14-41-1,500 ㎏․ 10 a−1) cultivation. Compost and fused phosphate applied at 100% of basal fertilizer in March 25. The split application level of standard application (N-K) applied at 50% of basal fertilizer in March 25, 50% of top dressing were five times application (N-K) in May 4, July 5, September 5, October 5, 20% respectively. Transplanting with Yeongkwang varieties in April 12 by growing pot seedling for 35 days in 2011. Planting density were spaced 60 ㎝ apart in rows 25 ㎝ apart with rice straw cutting covered open cultivation. Plot design randomized block 3 repetition. Conclusion : Organic matter, available phosphate, K2O, CaO, and MgO of soil increased in all plots with the addition of fertilizers culture, specifically in 25% and 50% increased application. Growth characteristics by 50% of top dressing were five times application (N-K) in May 4, July 5, September 5, October 5, compared to standard application (N-K) applied at 100% basal fertilizer, aerial part as a result were so many such amount of growth as number of branch and leaf per plant, etc., Length, width of leaf and leaf colorimetry of aboveground part growth increment rising highest. Green leaf yields compared to standard fertilizer 100% application (1,344 kg․ 10 a−1). 25% and 50% increased application (N-K) applied at 50% basal fertilizer, 50% of top dressing were five times application increased by 9%, 17%. respectively.

Background : The purpose of this study is to investigate the effect of split application and adapted fertilization application cultivation in stable medicinal herbs production of Angelica acutiloba K. And it accomplished one’s purpose to GAP guide manual established standard method of cultivation technology, contribute to the enlargement of farm’s income. Methods and Results : Method of fertilization application were conducted under four condition compose to standard application (N-P-K-Compost: fermented mixed oil cake fertilizer applied at 14-10-10-600 ㎏․10 a−1cultivation. Compost and fused phosphate applied at 100% of basal fertilizer in April 14. The split application level of standard application (N-K) applied at 100%, 50%, 40%, 30% of basal fertilizer in April 14, 50%, 40% and 30% of top dressing were two, three times application (N-K) in June 1, July 15, August 15, 25% and 20% respectively. Sowing dates with Jangsung varieties in April 28 of the year 2015. Planting density were spaced 30 ㎝ apart in rows 15 ㎝ apart with black color non-woven cloth covering open cultivation by level row 90 ㎝. Plot design randomized block 3 repetition. Conclusion : Growth characteristics by 50%, 70% and 60% of top dressing were two, three times application (N-K) in June 1, July 15, August 15 compared to standard application (N-K) applied at 100% basal fertilizer, aerial part as a result were so many such amount of growth as number of leaf per plant, etc., Length of leaf and main root of aboveground, subterranean part growth increment rising highest. Dried roots yields compared to standard fertilizer 100%application (217 kg․10 a−1) treatment. 50%, 70% and 60% of top dressing were two, three times application (N-K) increased by 6%, 14%, and 18%. respectively.

Background : The purpose of this study was to evaluate methods to high quality medicinal vegetables, thereby increasing farm income. This study investigated the effects of different green manures crop and application culture stable foliage production in Peucedanum japonicum Thunberg. Methods and Results : Method of application with green manure crop were conducted under four condition compose to control (non application), single cropping in barley, hairy vetch and mixed cropping in hairy vetch (60%) + barley (40%)culture. Sowing dates of green manure crop were October 14 in 2014. Transplanting with Jeonam Yeosu varieties in Junel 28 by growing pot seedling for 45 days in 2015. Method of application were standard application (N-P-K-Compost applied at 20-12-10-600 ㎏․10 a−1). Plants were spaced 10 ㎝ apart in rows 10 ㎝ apart with open cultivation. Conclusions : The utilization effect of nitrogen supplied by green manure crop was highest with the hairy vetch by 21.1% in single cropping and hairy vetch + barley by 29.8% in mixed cropping. Organic matter, available phosphate, K2O, CaO, and MgO of soil increased in plots with the mixed cropping hairy vetch + barley culture. Non application < barley < hairy vetch < hairy vetch + barley in mixed cropping, aerial part as a result were so many such amount of growth as number of leaf per plant, etc., green leaf yields is untreated control plot (1,876 kg․10 a−1) compared to 7% from using barley culture, hairy vetch culture 10% higher and hairy vetch + barley culture increased to 15% of the most.

Background:The purpose of improving the quality of oriental medicinal herbs is to contribute to the improvement of the income of farm. The present study investigated the effect of reasonable drying methods, different storage conditions and packageing materials on quality and stability of Scutellaria baicalensis Georgi and for developing GAP (good agricultural practice) guide book.Methods and Results:Three methods of drying Scutellaria baicalensis roots produced over two years were used to estimate loss rate owing to drying, storage, and packaging. The methods of drying were categorized into natural drying (36 - 60 h by sunshine), drying with heat dryer (2 - 10 h), or drying with gas bulk dryer (2 - 10 h). After cleaning, and initial drying for a few days under controlled temperature conditions, the second phase of drying was carried out at 35, 45 and 55°C. Changes in hunter color values and quality under the two studied storage treatments (at 20°C indoors and at 4°C in a refigerator) were evaluated. Storage period for 60, 120, and 180 days in three packaging materials, PE (polyethylene package), PP (polypropylene gunnysack), and WP (watertight packing paper) were studied.Conclusions:Initial cleaning, reasonable gas drying and hot air drying, and drying in an oven at 35 and 45°C after cutting the roots resulted in the lowest loss rates in S. Baicalensis root. Hunter color valuse indicated that stroage of dry roots at room temperature was better than PP packaging, and that cold stroage was better than PE packaging for long-term stability.

MRI검사는 조직의 대조도가 우수하여 근골격계 진단에 유용한 검사방법이다. 근골격계 검사 시 환자상태에 따라 보조기구가 이용되는 보조기구의 종류가 다양하지 않을 뿐 아니라 비용도 비싸다. 이에 본 연구는 3D 프린팅 기술의 활용하여 MRI 검사 보조기구를 제작하였다. 보조기구 제작과정으로는 3D 모델링(3D MAX.2014, Fusion360)을 사용해 STL파일로 변환 후 슬라이싱 프로그램(Cubicreater 2.1ver., Cura 15.4ver)을 통해 G-code로 변환시킨 후 FDM방식의 프린트(Cubicon Style, MICRO MAKE)로 출력하였다. 출력물이 MRI영상에 미치는 SNR을 평가하기 위해 FDM에서 사용하되는 PLA, ABS, TPU를 두께 3mm로 된 Water Phant om 케이스를 제작하여 case 사용 전, 후를 시험을 실시하여 비교하였으며, 보조기구 사용 전, 후의 임상영상을 정성적으로 평가 하였다. 영상을 획득하여 나타난 Warter Phantom의 SNR은 T1 NON 123.778 ± 28.492, PLA 123.522 ± 28.373, ABS 124.461 ± 25.716, TPU 124.843 ± 27.272 로 평가되었다. T2 NON 127.421 ± 26.949, PLA 124.501 ±2 7.768, ABS 128.663 ± 26.549, TPU 130.171 ± 25.998 로 평가되었다. 그 결과 통계 적으로 유의미한 차이를 보이지 않았다. 보조기구의 사용 전, 후의 임상영상 평가 결과 고식적 방법 3.20 ± 0.88, 보조기구 사용 3.95 ± 0.76 으로 보조기구 사용 후 영상의 질이 향상되었다. 향후 3D프린팅을 이용한 보조기구의 제작은 임상적으로 사용이 가능할 것으로 생각되고, 환자들의 검사 시 보다 안전하고 편안한 보조기구제작을 할 수 있어 기존에 쓰이는 보조기구의 문제점들을 개선하는 대안이 될 것으로 전망된다.

Background : The purpose of this study was to big strong and root in the disease, many high quality seed of Achyranthes japonica N. selection by fostering, expanding the spread on a farm and raw materials medicines of sources deployment for process is to contribute to increasing farm income. Methods and Results : Collected variety into the mass selection breeding method by head-to-row cultivation, native variety of Hwasoon and Jangheung Jeonnam, was conducted in 2007. Three individual selection in 2010 as it produces the 27 and five individual in 2008 and 2009. From 2010 to 2011, pure line isolation as it cultivated and one foundation group. Promising in 2012, select one system. Replicated yield trial for two years beginning in 2013 a result of the stem length, multiple No. of branches and providing high -quality “No. 1, Jeollanam-do” majority by assigning system name. Naju-si, Yeongam-gun, local excellence by implementing a local adaptability test recognized in two years. To breed a new variety named as a dwelling “ Woogang” of Achyranthes japonica N. the review by fostering december 2015 to be registered. Conclusions : Leaf type is the broad lancet, flowering time is new variety two days than Jangheung native variety delayed. New variety of stem length and main root length are check variety (89㎝, 13.5㎝) of 9㎝ and 2㎝ tall respectively. Seed yields has native variety as much as 35 % compared to the many into 43.5 kg/10a. The ecdysteroids contents of roots was 1.2 times higher compared to check variety (668.1ppm). The dried root yields of the new variety are 285kg/10a a many native variety than 20%.

Background : Panax ginseng C. A. Meyer is a slow-growing perennial herb that is cultivated in shading condition. Climate change occur around the world that make a lot of problem such as damage of high temperature, drought, salinity and disease. The problems lower the ginseng productivity that cause income reduction of farmers. To achieve stable ginseng production, development of elite varieities resistant to abiotic and biotic stresses is consistently required. It is very time consuming process in order to develop new ginseng varieties because ginseng flowers after 3 years of growth. So, early selection system of elite line must be established. This study was conducted to develope efficient ginseng breeding techniques for early identification of heat or salinity resistance. Methods and Results : Ginseng petioles was soaked in mixed salts solution consisting of KNO3, KH2PO4, MgSO4․H2O in order to test resistant or susceptible salinity. The degree of resistance was quantified according to damage size. Also, ginseng lines transplanted in pot were treated 46℃ for 1 hour and then chlorophyll fluorescence reaction were measured in order to test resistant or susceptible high-temperature. The measured values such as Fm/Fo, Fv/Fm, Rfd were differentiated between resistant and susceptible line. Conclusion : Several lines showed that they are resistance to high temperature or salinity. The selected lines will be utilized for parents to develop new varieties.

Background : The purpose of this study is to investigate the effect of the ridge and mulching cultivation and adapted sowing(planting)time in stable medicinal herbs production of Lithospermum erythrorhizon Siebold et Zuc. And it accomplished one’s purpose to GAP guide manual established standard method of cultivation technology, contribute to the enlargement of farm’s income. Methods and Results : Method of cultivation type with the ridge and covering material were conducted under two condition compose to open cultivation (level row : 120㎝ ridging, black polyethylene mulching) and plastic greenhouse cultivation (high row : 90㎝ ridging, non-woven fabric mulching). Sowing with Daehong varieties in April 17, transplanting July 25 by growing pot seedling for 40 days in 2015. Planting density were spaced 30㎝ apart in inter-rows 10 ㎝ apart intra-row. Fertilizing level of N-P-K-Compost (fermented mixed oil cake fertilizer) applied at 6-4-6-300 ㎏․10 a−1, 60% of basal fertilizer in March 14, 40% of top dressing were four times application in April 14 ～July 15. Plot design randomized block 3 repetition. Conclusions : Compared to level ridging on black polyethylene mulching open cultivation for growing plastic greenhouse with the high ridging non woven mulching cultivation, seed yields havesting 1.4 times, the dried roots yields increased in 0.7 times. Also, Growth characteristics by sowing time in April 16. compared to planting time in July 25. Length of stem and main root of above-ground, subterranean part growth increment rising highest. Seed and dried roots yields with increased by 71%, 30%. respectively.

The optimum concentrations of clove oil as an anesthetic for olive flounder (Paralichthys olivaceus) and the stress response of the fish to clove oil anesthesia were determined over a range of water temperatures, and investigated in a simulated transport experiment using analysis of various water and physiological parameters. While the time for induction of anesthesia decreased significantly as both the concentration of clove oil and water temperature increased, the recovery time increased significantly (P<0.05). The plasma cortisol concentration in fish at each temperature increased significantly up to 12 h following exposure (P<0.05), then decreased to 48 h (P<0.05). The DO dissolved oxygen concentrations, pH values, and the fish respiratory frequencies decreased over 6 h following exposure to clove oil in all experimental groups (P<0.05), whereas the NH4 + and CO2concentrations in all experimental groups increased up to 6 h (P<0.05). The pH values and DO concentrations increased with increasing clove oil concentration (P<0.05) in the 6 h following exposure, and the CO2 and NH4 + concentrations and the respiratory frequencies decreased with increasing clove oil concentration (P<0.05). The results of this experiment suggest that clove oil reduced the metabolic activity of olive flounder, thus reducing NH4 + excretion and O2 consumption. In conclusion, clove oil appears to be a cost-effective and efficient anesthetic that is safe for use and non-toxic to the fish and users. Its use provides the potential for improved transportation of olive flounder.