Metarhizium은 대표적인 곤충병원성 진균 중 하나로, 종에 따라 매우 다양한 곤충에게 병원성을 일으키는 폭 넓은 기주범위를 형성한다. 이들이 주로 생성하는 것으로 알려진 destruxins (DTXs)이라는 2차 대사산물은 살충 활성 뿐만 아니라 항바이러스, 항증식, 항암 등 다양한 분야에서 효능이 연구되고 있어, 해당 물질에 대한 관심이 집중되고 있다. 살충 물질로서의 DTXs는 여러 곤충에 있어 병원성을 나타내는 것이 확인되었으나, 해충 으로서 전 세계적으로 심각한 경제적 피해를 일으킴과 동시에, 화학 살충제 저항성 문제가 야기되고 있는 목화진 딧물에 대해서는 아직 DTXs의 역할이 연구되지 않고 있는 실정이다. 본 연구에서는 목화진딧물에 대해 곤충병원 성 진균 Metarhizium spp.의 병원성 발현에 DTXs가 미치는 역할을 간접적으로 확인하기 위해, qPCR을 활용하여 진균 처리 후 목화진딧물 사망 시간과 관련하여 충체 내 DTX 합성효소의 발현을 비교 분석하였다.

Mycoviruses are a group of viruses that infect filamentous fungi. While most hosts infected with mycoviruses do not show any symptoms. In some cases, mycoviruses induce various phenotypic changes include alterations in morphology, drug resistance, pathogenicity, virulence, sporulation, and growth. Entomopathogenic fungi are one of the integrated pest management agents as an alternative to conventional insecticides. Mycoviruses have the potential as supportive agents, enhancing the efficiency of the insecticidal activity of the fungi. Studies about mycoviruses themselves and their interaction with their hosts, especially entomopathogenic fungi, are needed to realize their full potential. In this work, the sequence of the dsRNA element isolated from the entomopathogenic fungus Metarhizium pinghaense 4-2 strain was determined. Through this study, we report the sequence of a dsRNA virus isolated from the Metarhizium pinghaense for the first time. In further studies, the ORF of the mycovirus that induces a phenotype change in the host will be researched.

Aphis gossypii is a representative pest that transmits plant viral diseases. It is difficult to control with chemical pesticides alone due to their high pesticide resistance. Entomopathogenic fungi are biological control agents that can replace chemical pesticides and have characteristics of high host specificity and safety to humans. Therefore, we investigated the immune pathways of aphids against initial infection by entomopathogenic fungus. We treated aphids with the Beauveria bassiana JEF 544 strain and examined the immune response in early infection by qPCR. furthermore, we also studied changes the molting time of nymphs and changes in adult nymphal production caused by entomopathogenic fungi.

마이코바이러스는 곰팡이를 감염시키는 바이러스로 자낭균류, 담자균류 및 난균류에서 주로 발견되며 일부 의 경우 곰팡이의 표현형에 영향을 끼치는 것으로 알려져 있다. 이번 연구에서는 대한민국 토양 샘플에서 분리된 65개의 자낭균류 및 접합균류 균주의 전체 핵산을 추출하고, 전기영동을 통해 바이러스 특이적 밴드를 스크리닝 하였다. 스크리닝 결과 65개의 균주 중에서 Tolypocladium spp. 균주 2개와 Marquandomyces marquandii 균주 1개에서 바이러스 특이적 밴드를 발견하였다. 그 후, Cellulose Chromatography를 이용하여 double-stranded RNA 를 분리하고 DNase I 및 S1 Nuclease 처리를 통해 DNA와 single-stranded RNA를 제거하여, Tolypocladium sp. 균주 1개와 Marquandomyces marquandii 균주에서 발견한 특이적 밴드가 dsRNA임을 확인하였다. 추후 virus-free isogenic line을 확보하여 virus 유무에 따른 표현형 변화를 확인하고, 마이코바이러스와 곰팡이 간의 상호작용에 관해 연구할 계획이다.

Aphids are well-known insect pests that, due to their feeding habits, affect various crops' productivity and marketability. Additionally, they cause significant damage worldwide as vectors of viruses. Chemical pesticides are widely used to control these agricultural pests. However, due to resistance to various chemical pesticides, pest control is becoming difficult in agricultural environments. Entomopathogenic fungi such as the genus Metarhizium and Beauveria are being extensively researched as alternatives to these chemical pesticides. In this study, the mycological properties of isolated from soil Metarhizium pemphigi IPBL-H and the insecticidal activity of this strain against Myzus persicae and Aphis gossypii were evaluated for potential of development as a biopesticide.

The biggest jewel beetle in Korea, Chrysochroa coreana, has been nominated as the Natural Monument No. 496 and also classified as Category I of Endangered Species by the Red Data Book. Due to the invisible feature of a saproxylic larval hood inside the host tree for years, the whole life history was hitherto been unknown to the academic world. In order to clarify the period of larval-hood and record images of the process of the final stage of emergence, we obtained sample eggs from two mated couples of adults that emerged from a dead tree of Celtis sinensis on Wando Island, which is well-known as the habitat of C. coreana. Larvae were hatched on four pieces of timber (Celtis aurantiaca) in July 2018 and kept in a growth chamber under the conditions of 25°C, 65% humidity, and in a 12-hour light/dark cycle. The development of larvae was monitored via the non-destructive C/T method every month. Six adults were emerged between February and March 2024. As a result, we obtained the fact that the larval period of C. coreana is minimum 66 months (5.5 years) under lab conditions.

Amorphous In-Ga-Zn-O (a-IGZO) thin film transistors (TFTs) with a coplanar structure were fabricated to investigate the feasibility of their potential application in large size organic light emitting diodes (OLEDs). Drain currents, used as functions of the gate voltages for the TFTs, showed the output currents had slight differences in the saturation region, just as the output currents of the etch stopper TFTs did. The maximum difference in the threshold voltages of the In-Ga-Zn-O (a-IGZO) TFTs was as small as approximately 0.57 V. After the application of a positive bias voltage stress for 50,000 s, the values of the threshold voltage of the coplanar structure TFTs were only slightly shifted, by 0.18 V, indicative of their stability. The coplanar structure TFTs were embedded in OLEDs and exhibited a maximum luminance as large as 500 nits, and their color gamut satisfied 99 % of the digital cinema initiatives, confirming their suitability for large size and high resolution OLEDs. Further, the image density of large-size OLEDs embedded with the coplanar structure TFTs was significantly enhanced compared with OLEDs embedded with conventional TFTs.

Two newly recorded sea stars, Henricia densispina (Sladen, 1879) and H. reniossa asiatica Djakonov, 1958, collected from the East Sea of Korea using fishing nets, were described in this study. Morphologically, H. densispina is characterized by the shape (sub-triangular) similarity of the intermarginal plates to the superomarginal plates. Henricia reniossa asiatica Djakonov, 1958, has long and slender arms (R/r=7.2- 9.1); clustered abactinal paxillae with 3-13 abactinal spinelets; a denuded abactinal skeleton made up of crescentic, elongated cross-shaped, the presence of small ossicles that divided the papular areas; and an adambulacral armature comprised of 14-17 spinelets. This study provides the first occurrence of H. densispina and H. reniossa asiatica in the Korean fauna and a detailed morphological description of these species’ key characteristics is provided.

If radioactive plumes are released outside due to loss of containment building integrity during a nuclear power plant accident, these materials might travel with the wind, affecting both the surrounding environment and neighboring countries. In China, most nuclear power plants are located on the eastern coast. Consequently, a radioactive plume generated during an accident could negatively impact even the western part of the Korean Peninsula due to westerly winds. To detect such problems early, respond quickly, and protect residents, a system that can monitor aerial radiation under normal conditions is needed. Additionally, a detection system that can operate in real-time in an emergencies conditions is required. The current method for aerial radiation measurement takes environmental radiation data from a monitoring post 1.5 m above the ground and converts it to altitude. To measure actual aerial radiation, an expansive area is surveyed by aircraft. However, this approach is both time-consuming and expensive. Thus, to monitor radioactive plumes influenced by environmental factors like wind, we need a radiation detector that can gauge both radioactivity and directionality. In this study, we developed a radiation detector capable of assessing both the radioactivity and directionality of a radioactive plume and conducted its performance evaluation. We miniaturized the radiation detector using a CZT (Cadmium Zinc Telluride) sensor, enabling its mounting on unmanned aerial vehicles like drones. It is configured with multi-channels to measure directionality of a radioactive plumes. For performance evaluation, we positioned two-channel CZT sensors at 90 degrees and measured the energy spectrum for angle and distance using a disk-type radioactive isotope. Using this method, we compared and analyzed the directionality performance of the multi-channel radiation detector. We also confirmed its capability to discern specific radioactivity information and nuclide types in actual radioactive plumes. Our future research direction involves mounting the multi-channel radiation detector on a drone. We aim to gather actual aerial radiation data from sensors positioned in various directions.

Decommissioning waste is generated with various types and large quantities within a short period. Concrete, a significant building material for nuclear facilities, is one of the largest decommissioning wastes, which is mixed with aggregate, sand, and cement with water by the relevant mixing ratio. Recently, the proposed treatment method for volume reduction of radioactive concrete waste was proven up to scale-up testing using unit equipment, which involved sequentially thermomechanical and chemical treatment. According to studies, the aggregate as non-radioactive material is separated from cement components with contaminated radionuclides as less than clearance criteria, so the volume of radioactive concrete waste is decreased effectively. However, some supplementation points were presented to commercialize the process. Hence, the process requires efficiency as possible to minimize the interface parts, either by integration or rearranging the equipment. In this study, feasibility testing was performed using integrated heating and grinding equipment, to supplement the possible issue of generated powder and dust during the process. Previously, heat treatment and grinding devices were configured separately for pilot-scale testing. But some problems such as leakage and pipe blockage occurred during the transportation of generated fine powder, which caused difficulties in maintaining the equipment. For that reason, we studied to reduce the interface between the equipment by integrating and rearranging the equipment. To evaluate the thermal grinding performance, the fraction of coarse and concrete fines based on 1mm particle size was measured, and the amount of residual cement in each part was analyzed by wet analysis using 4M hydrochloric acid. The result was compared with previous studies and the thermomechanical equipment could be selected to enhance the process. Therefore, it is expected that the equipment for commercialization could be optimized and composed the process compactly by this study.

Entomopathogenic fungi are used to produce raw materials by applying solid culture technology using grains. But there are various problems such as low production efficiency and cross-contamination. Solvum Co., Ltd. conducted research on liquid culture technology to develop a method that can overcome these shortcomings of solid culture technology. We conducted research and development on using Beauveria bassiana 331R to observe the culture according to the seed inoculation amount in a 30 L fermenter, it was carried out at 1.0 % (v/v) and 10.0 % (v/v). Although there was a difference of 1 day, 1.0 %(v/v) seed inoculation was observed to be more than twice that, and active blastospores and yield were observed at over 95.0 %. As a results, it was determined that cost and efficient production would be possible during the culture process in mass production. Based on these experiments, a 300 L fermenter was cultured with 1.0 % (v/v) seed inoculation, resulting in a yield of 1.24E+09 CFU/mL on the 6th day of cultivation. As a result of freeze-drying using the final culture medium, it was confirmed that the production yield was improved by 113.0 % compared to the control.

Cryptotympana atrata belongs to the family Cicadidae, has long been recognized as a damaging plant-sucking pest, and is distributed in East Asian countries. In addition, their cries cause direct harm to us through noise pollution and also reported twig damage in the forest environments. In this study, we isolated strains of the entomopathogenic fungus Metarhizium that occurred from C. atrata collected this year. Here, we provide the morphological character and molecular phylogenetic relationship of this species. This is the first record of the entomopathogenic fungus Metarhizium viridulum isolated from C. atrata in Korea and provides a candidate strain with potential use for biological agents.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

Mucosa-associated lymphoid tissue (MALT) lymphoma (ML) is a type of non-Hodgkin’s lymphoma involving MALT, commonly the stomach or salivary glands, although virtually any mucosal site can be affected. ML originates from B cells in the marginal zone of MALT, and is also called extranodal marginal zone B cell lymphoma. It is a slow-growing cancer that usually responds well to treatment. A 59-year-old female presented with a 1-day history of quadriparesis and dysarthria. Up arrival at the hospital, motor power in the right upper and lower extremities was grade 3/5 according to the Medical Research Council scale, while that in the left leg was 4/5. The patient had been diagnosed with gastric ML 1 year prior, and had received antibiotics during the previous 2 weeks. The emergency magnetic resonance imaging of the brain performed at the time of presentation showed multifocal embolic infarction in the cerebral hemisphere bilaterally, which did not have a cardiac origin. Magnetic resonance angiography revealed no stenotic or occlusive lesions. Secondary prophylaxis with daily administration of 300 mg aspirin was prescribed. The patient was discharged with residual right hemiparesis 2 weeks after the onset of symptoms. Herein, we present a rare case of multifocal cerebral infarction in a gastric ML patient.

With the rise of social media platforms, influencer marketing has become an essential tool for marketers to promote their products and services. Value co-creation behavior of influencers involves collaborating with their followers and brands to create content that provides value to their audience. This approach can help to build stronger relationships with followers and drive engagement and sales for the brands they work with.