Animal experiments have demonstrated the effectiveness of fermented rice germ and soybean extracts in lowering blood alcohol concentration. A compound primarily derived from fermented soybean extract constitutes the principal component of DA-5521, an experimental dietary substance examined in this study. We investigated the possible hangover-alleviating effects of DA-5521 in individuals aged 19 to 50 who had previously experienced hangovers. Moreover, we enrolled 22 participants who met the eligibility criteria and conducted a double-blind, randomized, placebo-controlled crossover trial. Six hours after alcohol consumption, the test group exhibited a statistically significant reduction in blood acetaldehyde concentration compared with the placebo group. Further, our results displayed significantly lower levels in the DA- 5521 group at 0.50 and 0.75 h post-ingestion and substantially lower peak breath alcohol concentration compared to the placebo group. These findings confirm that consumption of DA-5521 can significantly ameliorate hangover symptoms by diminishing blood acetaldehyde concentration and reduce breath alcohol concentration.

The emergence of ferrous-medium entropy alloys (FeMEAs) with excellent tensile properties represents a potential direction for designing alloys based on metastable engineering. In this study, an FeMEA is successfully fabricated using laser powder bed fusion (LPBF), a metal additive manufacturing technology. Tensile tests are conducted on the LPBF-processed FeMEA at room temperature and cryogenic temperatures (77 K). At 77 K, the LPBF-processed FeMEA exhibits high yield strength and excellent ultimate tensile strength through active deformation-induced martensitic transformation. Furthermore, due to the low stability of the face-centered cubic (FCC) phase of the LPBFprocessed FeMEA based on nano-scale solute heterogeneity, stress-induced martensitic transformation occurs, accompanied by the appearance of a yield point phenomenon during cryogenic tensile deformation. This study elucidates the origin of the yield point phenomenon and deformation behavior of the FeMEA at 77 K.

Pitfall traps that use ethylene glycol as a preservative solution are commonly used in arthropod research. However, a recent surge in cases involving damage to these traps by roe deer or wild boars owing to the sweet taste of ethylene glycol has prompted the addition of quinone sulfate, a substance with a pungent taste, to deter such wildlife interference. This study aimed to assess the effects of quinone sulfate on arthropods collected from pitfall traps containing ethylene glycol. We strategically positioned 50 traps using ethylene glycol alone and 50 traps containing a small amount of quinone sulfate mixed with ethylene glycol in a grid pattern for systematic sampling at the Gwangneung Forest long-term ecological research (LTER) site. Traps were collected 10 days later. The results revealed a notable effect on ants when quinone sulfate was introduced. Specifically, it decreased the number of ants. In a species-specific analysis of ants, only Nylanderia flavipes showed a significant decline in response to quinone sulfate, whereas other ant species remained unaffected. Additionally, among the arthropod samples obtained in this survey, we identified species or morpho-species of spiders, beetles, and ants and assessed species diversity. Consequently, the utilization of quinone sulfate should be undertaken judiciously, taking into account the specific species composition and environmental characteristics of the monitoring site. Our study also highlighted the significant response of various arthropod groups to variations in leaf litter depth, underscoring the crucial role of the leaf litter layer in providing sustenance and shelter for ground-foraging arthropods. Furthermore, we have compiled comprehensive species lists of both spiders and ants in Gwangneung forest by amalgamating data from this investigation with findings from previous studies.

This study aimed to prepare kombucha, a fermented tea beverage, containing Dendropanax morbiferus (DM) leaves and roots, and analyze its antioxidant and intracellular activities. We compared the pH change, total acidity, radical scavenging activity, and oxygen radical absorbance capacity (ORAC) of kombucha fermented with black tea alone and that with added DM leaves or roots during fermentation. Using RAW 264.7, we evaluated the effects of kombucha containing different DM parts on nitric oxide (NO) production and inflammation-related cytokine content in cells. Kombucha containing ethanol extracts of DM leaves (BTK-E-DML) and roots (BTK-E-DMR) showed higher radical scavenging activity and ORAC 3 d after fermentation than that prepared from black tea alone (BTK-Ori). In an in vitro experiment using RAW 264.7, samples were treated with 8 mg/mL kombucha considering cytotoxicity; the lipopolysaccharide (LPS)-induced NO content significantly reduced after BTK-E-DML and BTK-EDMR treatments compared with that after BTK-Ori treatment. Additionally, the levels of interleukin-6 and tumor necrosis factor-alpha, which were LPS-stimulated inflammatory cytokines, significantly decreased in cells treated with BTK-E-DML and BTK-E-DMR 15 d after fermentation compared with those treated with BTK-Ori. In conclusion, these results demonstrate that kombucha fermented with the leaves and roots of DM increases antioxidant activity and can significantly regulate inflammatory responses at the cellular level.

Wasteform is the first barrier to prevent radionuclide release from repositories into the biosphere. Since leaching rates of nuclides in wasteform significantly impact on safety assessment of the repository, clarifying the leaching behavior is critical for accurate safety assessment. However, the current waste acceptance criteria (WAC) of the Gyeongju repository only evaluates leachability indexes for Cs, Sr, and Co, which are tracers for nuclear power plant waste streams. Furthermore, ANS 16.1, the current leaching test method used in WAC, applies deionized water (DI) as leachant. However, the interactions between wasteform and groundwater environment in the repository may not be reflected. Therefore, it is necessary to review the current leaching test method and nuclides that may require the extra evaluation of leachability beyond the Cs, Sr, and Co. Tc and I are key nuclides contributing to high radioactive dose in safety assessment due to their high mobility and low retardation factor. The groundwater conditions within the repository, such as pH and Eh significantly affect the chemical form of Tc and I. For example, Tc in H2O system tends to form hydroxide precipitates in neutral pH condition and TcO4 - in strong alkaline environments according to the Pourbaix diagram. In case of I, it generally exists in the form of I-, while it exists as IO3 - as Eh increases. Although the current leaching test at the Gyeongju repository applies DI as a leachant, the actual repository is expected to have a highly alkaline environment with a substantial amount of various ions in the groundwater. Consequently, the leaching behavior in the ANS 16.1 test and the actual disposal condition is different. Thus, it is necessary to analyze the leaching behavior of Tc and I with reflecting the actual disposal environment. In this study, the leaching behavior of Tc and I is investigated by following ANS 16.1 leaching test method. The solidified waste specimens containing 10 mmol of Re and I were manufactured with cement, which is widely used as a solidification material. Re was applied instead of Tc, which has similar chemical behavior to Tc, and NH4ReO4 and NaI were used as surrogates for Re and I. As a leachant, deionized water and cement-saturated groundwater were prepared and the concentration of nuclides in the leachant is analyzed by ICP-OES. As the result of this study, experimental data can be applied to improve the WAC and disposal concentration standards in the future.

Spent ion exchange resins have been generated during the operation of nuclear facilities. These resins include radioactive nuclides. It is needed to fabricate them into a stable form for final disposal. Cement solidification process is a useful method for the fabrication of them into a waste form for final disposal. In this study, proper conditions for the fabrication of them into a stable waste form were determined using the cement solidification process. In-drum waste forms were then produced at the conditions, where the stability of representative samples was evaluated for final disposal. The samples were satisfied to the Waste Acceptance Criteria for low and intermediate level radioactive waste disposal sites. This result can be utilized to derive optimal conditions for the fabrication of spent ion exchange resins into a final disposal form.

Low- and intermediate level waste (LILW) repository in Gyeongju, Korea is in operation and the radioactive waste should satisfy the waste acceptance criteria (WAC) of the repository. Among the WAC of the Gyeongju LILW repository, the leachability index criterion is considered to be the criterion that is directly related to the isolation of the radionuclides from biosphere. Cesium, strontium, and cobalt should satisfy the leachability index larger than six by following the ANS 16.1 leaching test method. Several research were performed for the leachability index of Cs, Sr, and Co by following the ANS 16.1 leaching test method. However, the test condition of the previous research is expected to be different to the condition of the actual waste. Due to the radioactivity of the radionuclide such as Cs, Sr and Co, most of the research applied the surrogate of those radionuclides. The concentration of those nuclides was generally measured by the inductively coupled plasma (ICP) equipment, however, high concentration compared to the disposal limit of those nuclides due to the detection limit of the ICP was applied. From the Freundlich and Langmuir adsorption isotherms, the adsorption of the nuclides differs according to the concentration of the nuclides. As the leachability index of the nuclides is affected by the adsorption of the nuclides on the binding material, the effect of nuclide concentration is expected to be not ignorable. Therefore, the leachability index difference according to the nuclide concentration should be compared to avoid over- or underestimation of the leachability index. In this study, the difference in the leachability index according to the concentration of nuclides is aimed to be checked. Cs, Sr, and Co, which should satisfy the leachability index criterion in the WAC of the Gyeongju repository, were selected as target nuclides. Three concentrations were selected to compare the leachability index: 0.1 mol, 0.001 mol and below the regulatory exemption concentration. The concentration of non-radioactive nuclides in the leachant was measured by ICPOES and ICP-MS while the concentration of radionuclides was measured by HPGe. The result of this study can be applied as background data enhancing the WAC or disposal concentration limit of the radionuclides in Gyeongju LILW repository.

The effectiveness of a crystalline natural barrier in providing sealing capabilities is based on the behavior of numerous fractures and their intersections within the rock mass. It is important to evaluate the evolving characteristics of fractured rock, as the hydro-mechanical coupled processes occurring through these fractures play a dominant role. KAERI is actively developing a true tri-axial compression test system and concurrently conducting hydro-mechanical experiments using replicated fractured rock samples. This research is focused on a comprehensive examination of coupled processes within fractures, with a particular emphasis on the development of true tri-axial testing equipment. The designed test system has the capability to account for three-dimensional stress conditions, including vertical and both maximum and minimum horizontal principal stresses, realizing the disposal conditions at specific underground depths. Notably, the KAERI-designed test system employs the mixed true tri-axial concept, also known as the Mogi-type, which allows for fluid flow into fractures under tri-axial compression conditions. This system utilizes a hydraulic chamber to maintain constant stress in one direction through the application of oil pressure, while the other two directional stresses are applied using rigid platens with varying magnitudes. Once these mechanical stress conditions are established, control over fluid flow is achieved through the rigid platens in contact with the specimen section. This pioneering approach effectively replicates in-situ mechanical conditions while concurrently observing the internal fluid flow patterns within fractures, thereby enhancing our capacity to study these coupled phenomena. As future research, numerical modeling efforts will be proceeding with experimental data-driven approaches to simulate the coupled behavior within the fractures. In these numerical studies, two distinct fracture geometry domains will be generated, one employing simplified rough-walled fractures and the other utilizing mismatched rough-walled fractures. These investigations mark the preliminary steps in the process of selecting and validating an appropriate numerical model for understanding the hydro-mechanical evolution within fractures.

The solid-state chemistry of uranium is essential to the nuclear fuel cycle. Uranyl nitrate is a key compound that is produced at various stages of the nuclear fuel cycle, both in front-end and backend cycles. It is typically formed by dissolving spent nuclear fuel in nitric acid or through a wet conversion process for the preparation of UF6. Additionally, uranium oxides are a primary consideration in the nuclear fuel cycle because they are the most commonly used nuclear fuel in commercial nuclear reactors. Therefore, it is crucial to understand the oxidation and thermal behavior of uranium oxides and uranyl nitrates. Under the ‘2023 Nuclear Global Researcher Training Program for the Back-end Nuclear Fuel Cycle,’ supported by KONICOF, several experiments were conducted at IMRAM (Institute of Multidisciplinary Research for Advanced Materials) at Tohoku University. First, the recovery ratio of uranium was analyzed during the synthesis of uranyl nitrate by dissolving the actual radioisotope, U3O8, in a nitric acid solution. Second, thermogravimetric-differential thermal analysis (TG-DTA) of uranyl nitrate (UO2(NO3)2) and hyper-stoichiometric uranium dioxide (UO2+X) was performed. The enthalpy change was discussed to confirm the mechanism of thermal decomposition of uranyl nitrate under heating conditions and to determine the chemical hydrate form of uranyl nitrate. In the case of UO2+X, the value of ‘x’ was determined through the calculation of weight change data, and the initial form was verified using the phase diagram for the U-O system. Finally, the formation of a few UO2+X compounds was observed with heat treatment of uranyl nitrate and uranium dioxide at different temperature intervals (450°C-600°C). As a result of these studies, a deeper understanding of the thermal and chemical behavior of uranium compounds was achieved. This knowledge is vital for improving the efficiency and safety of nuclear fuel cycle processes and contributes to advancements in nuclear science and technology.

Once discharged, spent nuclear fuel undergoes an initial cooling process within deactivation pools situated at the reactor site. This cooling step is crucial for reducing the fuel’s temperature. Once the heat has sufficiently diminished, two viable options emerge: reprocessing or interim storage. A method known as PUREX, for aqueous nuclear reprocessing, involves a chemical procedure aimed at separating uranium and plutonium from the spent nuclear fuel. This separation not only minimizes waste volume but also facilitates the reuse of the extracted materials as fuel for nuclear reactors. The transformation of uranium oxides through dissolution in nitric acid followed by drying results in uranium taking the form of UO2(NO3)2 + 6H2O, which can then be converted into various solid-state configurations through different heat treatments. This study specifically focuses on investigating the phase transitions of artificially synthesized UO2(NO3)2 + 6H2O subjected to heat treatment at various temperatures (450, 500, 550, 600°C) using X-ray Diffraction (XRD) analysis. Heat treatments were also conducted on UO2 to analyze its phase transformations. Additionally, the study utilized XRD analysis on an unidentified oxidized uranium oxide, UO2+X, and employed lattice parameters and Bragg’s law to ascertain the oxidation state of the unknown sample. To synthesize UO2(NO3)2 + 6H2O, U3O8 powder is first dissolved in a 20% HNO3 solution. The solid UO2(NO3)2 + 6H2O is obtained after drying on a hotplate and is subsequently subjected to heat treatment at temperatures of 450, 500, 550, and 600°C. As the heat treatment temperature increases, the color of the samples transitions from orange to dark green, indicating the formation of different phases at different temperatures. XRD analysis confirms that uranyl nitrate, when heattreated at 500 and 550°C, oxidizes to UO3, while the sample subjected to 600°C heat treatment transforms into U3O8 due to the higher temperature. All samples exhibit sharp crystal peaks in their XRD spectra, except for the one heat-treated at 450°C. In the second experiment, the XRD spectra of the heat-treated UO2 consistently indicate the presence of U3O8 rather than UO3, regardless of the temperature. Under an oxidizing atmosphere within a temperature range of 300 to 700°C, UO2 can be oxidized to form U3O8. In the final experiment, the oxidation state of the unknown UO2+X was determined using Bragg’s law and lattice parameters, revealing that it was a material in which UO2 had been oxidized, resulting in an oxidation state of UO2.24.

참깨는 건전 유기 종자생산을 위해서는 Corynespora cassicola 등과 같은 종자전염 병원균의 감염을 최소화해 야 하므로 비가림하우스 내에서의 종자생산이 필수적이다. 그러나 비가림하우스 재배 시 진딧물의 대발생으로 참깨의 생산량 저하 되므로 본 연구에서는 참깨 비가림하우스 내 유기 재배 시, 진딧물에 대한 효과적인 유기농업 자재를 선발하고자 한다. 등록된 유기농업자재 8종 중 4종을 기내에서 선발하였으며 선발된 유기농업자재 4종을 참깨 재배기간 중 주 1회 처리한 결과, 처리 간 유의한 차이가 나타났다. 수확기인 8월 3일 기준 무처리구 대비 데리스추출물 70%와 데리스 20%+시트로넬라 30%+계피추출물 10%은 12.3%, 9.0%만이 고사하여 우수한 방제 효과를 나타냈다. 본 연구 결과는 참깨 재배 시 농림현장에서 발생하는 복숭아혹진딧물에 대한 유기농업자재 효과를 검정함으로써 유기재배 농가의 자재 선택에 대한 정보를 제공하고자 한다

A causality exists between insect density and plant health, where plant health is affected by both the plant’s potential and environmental factors. In other words, causality is possible between insect density and environmental factors, allowing for the analysis of insect density based on these environmental factors. Machine learning enables studying insect density alongside environmental factors, providing insights into the causality between insects, the environment, and plant health. Machine learning is a methodology that involves the design of models by learning patterns from input data. This study aims to predict F. occidentalis density by sampling environmental factors and applying them to machine learning models.

For effective control of Frankliniella occidentalis, one of polyphagous pests with resistance to insecticides, necessitates the implementation of an integrated pest management strategy. Therefore, estimation of pest density is essential and this is achieved through the application of spatial statistical analysis methods. Because traditional methods often overlook the correlation between sampling locations and data, geostatistical analysis using variogram and kriging is introduced. Variogram provides information on the independent distance between data points. Kriging is a spatial interpolation technique for estimating the values at unsampled locations. For assessing model fitness, cross-validation is used by comparing predicted values with actual observations. This study focuses on the application of geostatistical techniques to estimate F. occidentalis density in hot pepper greenhouse, thereby contributing to making decision.

Climate change and biological invasions are the greatest threats to biodiversity, agriculture, health and the global economy. Tomato leafminer(Tuta absoluta) (Meyrick) (Lepidoptera: Gelechiidae) is one of the most important threats to agriculture worldwide. This pest is characterized by rapid reproduction, strong dispersal ability, and highly overlapping of generations. Plants are damaged by direct feeding on leaves, stems, buds, calyces, young ripe fruits and by the invasion of secondary pathogens which enter through the wounds made by the pest. Since it invaded Spain in 2006, it has spread to Europe, the Mediterranean region, and, in 2010, to some countries in Central Asia and Southeast Asia. In East Asia, Tomato leafminer was first detected in China in Yili, Xinjiang Uygur Autonomous Region, in 2017. There is a possibility that this pest will invade South Korea as well. This study provides this by the use of MaxEnt algorithm for modelling the potential geographical distribution of Tomato Leafminer in South Korea Using presence-only data.

Since the importance of integrated pest management to minimize environmental damage and maximize pest control effectiveness has emerged, efforts to put it into practice have continued. To implement IPM, it is necessary to estimate the economic injury level to determine the control method by identifying pests and weeds that damage the quantity and quality of crops in the field, investigating the occurrence level, and calculating the ratio of cost and effectiveness. Also, damage to host plants caused by increased density of insect pests appears to change plant’s health that key factor for managing crops. Therefore, understanding the relationship between the density of pests and the damage to the host plants is necessary. This study aims to analyze the causal relationship between the density of insect pests and damage to the host plants for estimating the economic injury level of insect pests on the host plants and investigating the possibility of pest control decision-making using plant health status.

Civil defense originally refers to the protection of civilians in the events of war-related disasters. Today, it encompasses a wide range of protection, rescue, and recovery activities not only aimed at minimizing the damage caused by war but also addressing natural and man-made disasters such as wildfires, typhoons, and floods. Civil defense uniforms are worn by volunteers who participate in civil defense training organized by practitioners, government officials, and military personnel. Therefore, more than 3,350,000 persons (+6.5 % of the Korean population) likely should wear civil defense uniforms. As such, the functionalities of civil defense uniforms need to be reexamined and improved in response to the wider and newer responsibilities of the civil defense system to protect the civil defense personnel from potential hazards and to help better serve the Korean citizens. The essential functions of civil defense uniforms were proposed by analyzing various civil defense activities. Per the level and type of safety hazards, the design and materials for civil defense uniforms should ideally differ, similar to civil defense uniforms in other countries. We surveyed the current Korean civil defense uniforms’ design, material compositions and important functionalities such as water repellency, water pressure resistance, and flame resistance. Compared to common functional workwear, we suggest room for improvement in the functional properties of civil defense uniforms. This research paves a new road for the functional design of civil defense uniforms to address a wider range of hazards, potentially leading to rational guidelines for protective workwear and government uniform development.