This study aimed to examine the changes in dry matter yield and growth characteristics of alfalfa (Medicago sativa L.) in response to variations in sowing dates during the autumn season of 2021-22 in a dry paddy field of Chilbo-myeon, Jeongeup-si, Jeollabuk-do. Treatments comprised four sowing dates at 10-day intervals, i.e., October 8, October 18, October 28, and November 8, 2021. The winter survival rate of alfalfa showed a significant difference between different treatments but was at a satisfactory level for all (p<0.05). The winter survival rate for the fourth sowing date, a month later than the first sowing date, was approximately 11.7% lower than that for the first sowing date. The plant height ranged between 82.3–93.1 cm and 60.5–63.7 cm at the first and second harvest, respectively, smaller at the second harvest than at the first harvest. The total dry matter yield of alfalfa was the highest at 13,316 kg/ha for the first sowing date, and the later the sowing date, the lower the dry matter yield. The protein content of alfalfa ranged between 13.6–17.3% in the first harvest, lower than the standard alfalfa protein content of 20% or more. In relative feed value, the first sowing (Oct. 8) was the most significantly higher in the first harvest (p<0.05). These results suggest that the early and mid-October sowing dates are optimum for sowing alfalfa during autumn and result in improved plant growth, dry matter yield, protein content, and winter survival compared to those at later sowing dates. Therefore, dry paddy fields can be safely employed for alfalfa cultivation with sowing dates in early and mid-October during autumn.

The periodic occurrence of biological population is affected by several biological and environmental factors and ancient literature survey offers insight into ecological process related to the cyclicity. The periodic occurrence of a Lepidopteran species, the pine caterpillar (Dendrolimus spectabilis), was estimated based on ancient literature survey. The pine caterpillar was one of the most injurious defoliators of pine trees in northeast Asia, especially Korea during 1960s and 1970s. Outbreaks of this species have long history in Korea. Since about 900 years ago, damages of pine forest by this species and its control were recorded both in History of Corea dynasty which cover 475 years (918-1392) of the history of the Corea Dynasty and in the Annals of Joseon Dynasty (Joseon Wangjo Shillok) which cover 472 years (1392-1863) of the history of the Joseon Dynasty, respectively. At least over 20 and 30 occurrences of pine caterpillar were recorded during Corea dynasty and Joseon Dynasty, respectively. These results showed that the pine caterpillar had been one of the most severe forest pests during Corea and Joseon Dynasty. Our result showed that the ancient literature survey is useful to understand the long-term periodic occurrence of the pine caterpillar.

Naringenin and its glycoside naringin (naringenin-7-O-glycoside) belong to this series of flavonoids and were well-known strong antioxidant activity. This study was conducted to flavonoid constituents and antioxidant activity of Pleurotus ostreatus and Pleurotus cornucopiae. In order to determine active ingredient contents of Pleurotus ostreatus and Pleurotus cornucopiae, we were carried out total polyphenolic content (TPC) and flavonoid content (TFC) analyses. As a result, TPC (31.05 ± 0.03 g GAE/kg extract) and TFC (13.25 ± 1.24 g NE/kg extract) of Pleurotus cornucopiae were found significantly higher as compared to Pleurotus ostreatus. The IC50 values based on the DPPH (56.50 ± 0.73 μg/ml) and ABTS (86.53 ± 3.86 μg/ml) for Pleurotus cornucopiae were generally stronger showing potential antioxidant properties compared to Pleurotus ostreatus. In addition, naringin and naringenin content were analyzed by high-performance liquid chromatography analysis. A great amount of naringin and naringenin was found in Pleurotus cornucopiae. These results indicate that the Pleurotus cornucopiae can be used as an antioxidant therapeutic agent.

Nanopowders provide better details for micro features and surface finish in powder injection molding processes. However, the small size of such powders induces processing challenges, such as low solid loading, high feedstock viscosity, difficulty in debinding, and distinctive sintering behavior. Therefore, the optimization of process conditions for nanopowder injection molding is essential, and it should be carefully performed. In this study, the powder injection molding process for Fe nanopowder has been optimized. The feedstock has been formulated using commercially available Fe nanopowder and a wax-based binder system. The optimal solid loading has been determined from the critical solid loading, measured by a torque rheometer. The homogeneously mixed feedstock is injected as a cylindrical green body, and solvent and thermal debinding conditions are determined by observing the weight change of the sample. The influence of the sintering temperature and holding time on the density has also been investigated. Thereafter, the Vickers hardness and grain size of the sintered samples have been measured to optimize the sintering conditions.

A aderid genus Phytobaenus Sahlberg is reported from Korea for the first time based on P. amabilis amabilis Sahlberg. In Korea, only one aderid species, Hylophilus praescutellaris Pic, has been recorded in Korea. A redescription of the species and illustrations of diagnostic characteristics including male genitalia are provided.

As a replacement for activated carbon, biochar was synthesized and used for the adsorptive removal of formaldehyde and nitrogen oxide. Biochar was produced from the fast pyrolysis of the red marine macro alga, Pyropia tenera. The P. tenera char was then activated with steam, ammonia and KOH to alter its characteristics. The adsorption of formaldehyde, which is one of the main indoor air pollutants, onto the seaweed char was performed using 1-ppm formaldehyde and the char was activated using a range of methods. The char activated with both the KOH and ammonia treatments showed the highest adsorptive removal efficiency, followed by KOH-treated char, ammonia-treated char, steam-treated char, and non-activated char. The removal of 1000-ppm NO over untreated char, KOH-treated char, and activated carbon was also tested. While the untreated char exhibited little activity, the KOH-treated char removed 80% of the NO at 50°C, which was an even higher NO removal efficiency than that achieved by activated carbon.

The purpose of this study is to present theoretical and experimental evidence for a niche strategy for small and medium online shopping malls to run business against large famous shopping malls prevailing the E-commerce market. For this, the present study demonstrates how chronic construal levels of consumers may affect their alternative choice for online shopping via various contexts (Experiment 1-3) and categories (Experiment 3-5). This series of experiments suggests that consumers with high construal level can be defined as a group that is relatively less susceptible to reputation of the shopping malls. Thus, strategically targeting this group of consumers will help small and medium-sized online malls lacking store reputation to mitigate their competitive disadvantage. Based on both existing literature and the experimental results as above, this research discusses possible methods for small and medium-sized online shopping malls to target high-construal segmentation.

Refuse-derived fuel (RDF) produced using municipal solid waste was pyrolyzed to produce RDF char. For the first time, the RDF char was used to remove aqueous copper, a representative heavy metal water pollutant. Activation of the RDF char using steam and KOH treatments was performed to change the specific surface area, pore volume, and the metal cation quantity of the char. N2 sorption, Inductively Coupled Plasma-Atomic Emission Spectrometer (ICP-AES), and Fourier transform infrared spectroscopy were used to characterize the char. The optimum pH for copper removal was shown to be 5.5, and the steam-treated char displayed the best copper removal capability. Ion exchange between copper ions and alkali/alkaline metal cations was the most important mechanism of copper removal by RDF char, followed by adsorption on functional groups existing on the char surface. The copper adsorption behavior was represented well by a pseudo-second-order kinetics model and the Langmuir isotherm. The maximum copper removal capacity was determined to be 38.17 mg/g, which is larger than those of other low-cost char adsorbents reported previously.

In this study, the anti-oxidant, anti-tumorigenic, anti-hypertensive, anti-thrombic, anti-diabetic, and anti- inflammatory properties of 18 different species of genus Pleurotus were investigated. In addition, the amino acid, β-glucan, and polyphenol contents were also measured. The β-glucan and polyphenol contents were the highest in Pleurotus cornucopiae var. citrinopileatus (yellow Pleurotus) of all species. The yellow Pleurotus also exhibited the highest physiological activity as assessed by the DPPH IC, Cytotoxic activity, ACE activity and so on. To confirm the mechanism for the physiological activity of the yellow Pleurotus, we performed further examinations within ICR mice. The yellow Pleurotus reduced glucose, triglyceride and total cholesterol levels in the ICR mice blood for 4 weeks after feeding, and also significantly lowered both GOT and GPT levels. Taken together, our data indicates the yellow pleurotus is a promising functional food ingredient.

In this study, we evaluated the antioxidant activity and anti-inflammatory effects of Abeliophyllum distichum (A. distichum) leaves that were prepared via air-drying. Fresh and air-dried A. distichum leaves were examined via 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) radical scavenging assay and measurements of the reducing power. The suppression effects on inflammation of the leaves were analyzed by a western blot and RT-PCR on LPS-induced RAW 264.7 cells. As a result, the antioxidant activity of the fresh leaves was found to be more effective than that of the air-dried leaves. Also, the fresh leaves were more effective in suppressing the protein and mRNA levels of iNOS and COX-2 than the air-dried leaves, thereby indicating the better anti-inflammatory effects. In addition, the contents of phenolic compounds and acteoside were analyzed by high-performance liquid chromatography (HPLC). The results showed that the acteoside content decreased with the use of the air-drying method, while there was no change in the content of phenolic compounds. Therefore, this study indicated that fresh A. distichum leaves potential antioxidant and suppression activities of various factors that are involved in the production of NO, which were found to be better than those of air-dried A. distichum leaves. These biological activities were also found to be independent of the content of phonolic compounds and were assumed to be directly or indirectly related to the content of acteoside.

Backgoound : This study was conducted to evaluate the quality variation of Ixeris dentata on the antioxidant contents and antioxidant activities according to the different producing area. Methods and Results : The samples were extracted with 70 % EtOH and then analyzed for total flavonoid contents, polypenol contents, DPPH radical scavenging activity, and ABTS radical scavenging activity. Luteinol 7-O-β-D-glucoside, an index component of the Ixeris dentata, was analyzed by HPLC. The leafs of Ixeris dentata in Jinan had the highest concentration of polyphenols (23.91 ㎎/g), followed by Jinbu (22.63 ㎎/g) and Eumseong (21.36 ㎎/g). Flavonoid content was highest in Jinan (15.27 ㎎/g), but there was no significant difference between Jinbu (14.05 ㎎/g) and Eumseong (13.99 ㎎/g). The contents of luteinol 7-O-β-D-glucoside were confirmed in Jinan (0.68%), Jinbu (0.49%) and Eumseong (0.36%), respectively. Conclusion : The comparison of antioxidant contents and antioxidant activities of Ixeris dentata according to the different producing area, Jinan was had the highest concentration, followed by Jinbu and Eumseong. Our results showed that the content of luteoline-7-D-glucoside varied among the different producing area.