Most of the C-14 produced is in the organic form, generated as methane (14CH4), methanol (14CH3OH), formaldehyde (14CH2O), and formic acid (14CO2H2). When analyzing C-14, it is transformed into the form of 14CO2, and its concentration is determined using LSC. Typical examples include the wet oxidation method, the combustion or Pyrolysis. The wet oxidation method uses strong acids and involves repeated operations, which generates large amounts of acid waste and secondary radioactive waste. The combustion method uses high temperatures, which requires an oxygen device. Pyrolysis also requires high temperature in a vacuum and catalysts. Catalysts are expensive because they are platinum-based. To compensate for these shortcomings, a C-14 analysis method using UV irradiation was developed. In this study, 100 mL of distilled water mixed with formic acid (CO2H2), potassium persulfate (K2S2O8), and silver nitrate (AgNO3) was irradiated with a 320-390 nm UV lamp to conduct a CO2 production reaction experiment. The UV range was measured using a photometer (UV Power puck II). The beaker was made of quartz in 150 mL size with three inlets : a temperature measurement, a sample inlet, and a collection tube connector. We changed the UV lamp used from a 450 W halogen lamp to a 100 W LED, which has a lower temperature and is safer. As a result of the experiment, CO2 bubbles were generated in the collection tube, due to the UV irradiation react, which uses oxidizer and catalysts. The maximum temperature of the solution irradiated with the LED UV lamp was less than 56°C. It confirmed the rate of bubble generation changed depending on the lamp distance, the amount of sample, oxidizer, and catalyst. In an experiment to confirm the reaction caused by heat, it was found that although a reaction occurred due to heat, the reaction was significantly lower than when using a UV lamp. The reproducibility experiment was conducted three times in total under the same conditions. It showed the same pattern. In the future, we plan to select mock samples, collect 14CO2 in Carbo- Sorb, and analyze them using LSC. The results of this research will be used as a technology to recover C-14 more safely and efficiently and will also be used to expand its application to the treatment of other wastes such as waste liquid and waste resin through simulated samples.

Molten Salt Reactor (MSR) is one of the 4th generation nuclear power systems which is its verified technology in physically and chemically. Among the various salts used for MSR system, the eutectic composition of NaCl-MgCl2 system maintains the liquid state at around 450°C, in the same time, it has high solubility for nuclear fuel chlorides. This characteristic has high advantage for lowering the operating temperature for the MSR, which could reduce the problem of hightemperature corrosion by salt for structural materials significantly. In particular, since MgCl2 has the similar standard reduction potential with nuclear fuel, is used as a surrogate for, many basic researches have been conducted for verifying characteristic of MgCl2. It is well-known that main short-advantage of MgCl2 is hygroscopic properties. MgCl2 changes to MgCl2-xH2O state easily by absorbing moisture in air condition. The hydrated MgCl2 is producing MgOHCl by thermally decomposing at high temperature, the formed MgOHCl corrodes structural materials, even small amount of MgOHCl gives significant damage. Therefore, the purification of MgCl2 has been required for long-term operation of MSR using MgCl2 as a base salt. In this study, the purification of eutectic composition salt for NaCl-MgCl2 has been mainly performed by considering its thermodynamic properties and electrochemical characteristic, and the experimental results have been discussed.

The inorganic scintillator used in gamma spectroscopy must have good efficiency in converting the kinetic energy of charged particles into light as well as high light output and high light detection efficiency. Accordingly, various studies have been conducted to enhance the net-efficiency. One way to improve the light yield has been studied by coating scintillators with various nanoparticles, so that the scintillation light can undergo resonance on surface between scintillators and nanoparticles resulting in higher light yield. In this study, an inorganic scintillator coated with CsPbBr3 perovskite nanocrystals using dip coating technique was proposed to improve scintillation light yield. The experiment was carried out by measuring scintillation light output, as the result of interaction between inorganic scintillator coated with CsPbBr3 perovskite nanocrystals and gamma-ray emitted from Cs-137 gamma source. The experimental results show that the channel corresponding to 662 keV full energy peak in the Cs-137 spectrum shifted to the right by 14.37%. Further study will be conducted to investigate the detailed relationships between the scintillation light yield and the characteristics of coated perovskite nanoparticles, such as diameter of nanoparticles, coated area ratio and width of coated region.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

The presence of organic components in spent scintillation liquid should be considered during all steps of radioactive waste processing for final disposal. Scintillation liquids often referred to as cocktails are generated form radiochemical analyses of radionuclides, which mainly consists of mixtures of liquid organic materials such as toluene and xylene. Typical features of these liquid organic materials are volatility, combustibility and toxicity. These are the reason why special attention must be paid to the management of liquid organic radioactive wastes. To select an appropriate waste management strategy and to design the treatment process of spent scintillation cocktails, it is required to investigate the nature of the waste such as specific radioactivity and moisture content. The analysis results of spent scintillation liquid generated at Wolsong nuclear power plants will be discussed. An overview of the technical approaches available for the treatment of organic radioactive waste will be additionally provided.

The operation time of a disposal repository is generally more than one hundred years except for the institutional control phase. The structural integrity of a repository can be regarded as one of the most important research issues from the perspective of a long-term performance assessment, which is closely related to the public acceptance with regard to the nuclear safety. The objective of this study is to suggest the methodology for quantitative evaluation of structural integrity in a nuclear waste repository based on the adaptive artificial intelligence (AI), fractal theory, and acoustic emission (AE) monitoring. Here, adaptive AI means that the advanced AI model trained additionally based on the expert’s decision, engineering & field scale tests, numerical studies etc. in addition to the lab. test. In the process of a methodology development, AE source location, wave attenuation, the maximum AE energy and crack type classification were subsequently studied from the various lab. tests and Mazars damage model. The developed methodology for structural integrity was also applied to engineering scale concrete block (1.3 m × 1.3 m × 1.3 m) by artificial crack generation using a plate jacking method (up to 30 MPa) in KURT (KAERI Underground Research Tunnel). The concrete recipe used in engineering scale test was same as that of Gyeongju low & intermediate level waste repository. From this study, the reliability for AE crack source location, crack type classification, and damage assessment increased and all the processes for the technology development were verified from the Korea Testing Laboratory (KTL) in 2022.

In 2012, POSIVA selected a bentonite-based (montmorillonite) block/pellet as the backfilling solution for the deposition tunnel in the application for a construction license for the deep geological repository of high-level radioactive waste in Finland. However, in the license application (i.e. SC-OLA) for the operation submitted to the Finnish Government in 2021, the design for backfilling was changed to a granular mixture consisting of bentonite (smectite) pellets crushed to various sizes, based on NAGRA’s buffer solution. In this study, as part of the preliminary design of the deep geological repository system in Korea, we reviewed history and its rationale for the design change of Finland’s deposition tunnel backfilling solution. After the construction license was granted by the Finnish Government in 2015, POSIVA conducted various lab- and full-scale in-situ tests to evaluate the producibility and performance of two design alternatives (i.e. block/pellet type and granular type) for backfilling. Principal demonstration tests and their results are summarized as follows: (a) Manufacturing of blocks using three types of materials (Friedland, IBeco RWC, and MX-80): Cracking and jointing under higher pressing loads were found. Despite adjusting the pressing process, similar phenomena were observed. (b) 1:6 scale experiment: Confirmation of density difference inhomogeneity due to the swelling of block/pellet backfill and void filling due to swelling behavior into the mass loss area of block/pellet. (c) FISST (Full-Scale In situ system Test): Identification of technical unfeasibility due to the inefficient (too manual) installation process of blocks/pellets and development of an efficient granular in-situ backfilling solution to resolve the disadvantage. (d) LUCOEX-FE (Large Underground Concept Experiments – Full-scale Emplacement) experiment: Confirmation of dense/homogeneous constructability and performance of granular backfilling solution. In conclusion, the simplified granular backfill system is more feasible compared to the block/ pellet system from the perspective of handling, production, installation, performance, and quality control. It is presumed that various experimental and engineering researches should be preceded reflecting specific disposal conditions even though these results are expected to be applied as key data and/or insights for selecting the backfilling solution in the domestic deep geological repository.

The permanent disposal of discharged spent nuclear fuel (SNF) and contaminated radioactive waste generated from the subsequent chemical treatments of SNF has become a serious pending issue in many countries that operate the nuclear power plants. Among the diverse engineering solutions proposed for the disposal of high-level radioactive waste (HLW), deep geological disposal (DGD) has been considered as the most proven and safe option to prevent any significant release of radionuclides into the biosphere and to predictably ensure the long-term performance of disposal system. The DGD system consists of multiple structural components; the bentonite clay-based buffer and tunnel backfills are designed to perform the primary hydrogeochemical functions of 1) inhibiting the ingress of groundwater and reactive substances that could compromise the integrity of canister and 2) retarding the migration of released radionuclides into biosphere by providing the sufficient chemisorption sites. Montmorillonite, which is a 2:1 phyllosilicate mineral belonging to smectite group, constitutes the majority of bentonite, and it mainly predominate the swelling and chemisorption capacities of the clay material. Thus, it is essentially required to thoroughly understand the chemical interactions of major radionuclides and other important substances with montmorillonite in advance to accurately evaluate the long-term retention performance of engineered barriers and to reduce the uncertainties in the safety assessment of a deep geological repository (DGR) ultimately. Thus far, sorption of dissolved species onto mineral adsorbents has been generally described and quantified using the simple sorption-desorption distribution coefficient (Kd) concept; since any specific reaction mechanisms are not considered and reflected in the Kd concept, an empirical Kd value is intrinsically dependent on the aqueous conditions under which it was measured. In this framework, substantial scientific efforts have been made to develop a robust basis for geochemically parametrizing the sorption phenomena more reliably, and the application of thermodynamic sorption modeling (TSM), which is based on the chemical principle of mass action laws, has been studied with the aim of improving overall confidence in the description of radionuclide migration under a wide range of aquatic conditions. The disposal performance demonstration R&D division of KAERI introduced a new reference Ca-bentonite clay called Bentonil-WRK (Clariant Korea) for HLW disposal research in 2021 as the domestic Ca-bentonite sources have being depleted. We successfully separated and purified Ca-montmorillonite from the Bentonil-WRK clay, and its geochemical characteristics were meticulously studied by means of XRD, BET, CEC, FT-IR analyses and controlled acid-base titration. In this work, chemical sorption behaviors of aqueous iodide and benzoate, which are a major fission product in HLW and a model ligand of complex natural organic matters present in the deep geological environment, onto the purified Camontmorillonite were assessed under ambient conditions of S/L = 5 g/L, I = 0.01 M CaCl2, pH = 4- 9, pCO2 = 10-3.4 atm, and T = 25°C. Further, their unique adsorption envelopes and corresponding thermodynamic reaction constants refined from the diffuse double layer model (DDLM)-based inverse modeling of experimental sorption data were discussed.

The PRIDE scale mechanical decladder is decladding apparatus for separating and recovering fuel material and cladding hull by horizontally slitting rod-cut. In order to enhance mechanical decladdng efficiency, the main requirements were considered as follows. Decladding of the fuel rods may be performed by rotation of three circular cutting blades inserted among the rollers arranged at 120° portion. In a mechanical decladder, a slitting assembly as a unit for slitting the cladding tube may include cutting blades for slitting and rollers for guiding extrusion of the cladding tube. Rotation of the cutting blades may be caused by the fuel rods being extruded from a plurality of rollers. Slitting intervals of rod-cuts having different diameters may be controlled by adding or removing a spacing plate between the cutting blade and a ranch bolt for fixing the slitting blade to the slitting assembly. An extrusion velocity with respect to the fuel rods may be controlled by a hydraulic pressure applied to the fuel rods. A force for cutting the fuel rods may be adjusted by controlling steel plates. Forces applied to a plurality of rollers may be generated by the hydraulic cylinder. The hydraulic pressure may be controlled by hydraulic pressure controller. The PRIDE scale mechanical decladder mainly consists of auto feeding module, hydraulic cylinder module and blade module. A load cell was installed between the hydraulic cylinder and the extrusion pin to measure the decladding force and slitting velocity, and a data acquisition system capable of obtaining data by using the RSC 232 was constructed. Also, the control panel can control the forward and backward movement of the extrusion pin, the hydraulic flow rate, and the hydraulic velocity. In the mechanical decladding test, 40 pieces of simulated rod-cuts were loaded in two auto feeding basket and slit by utilizing the 3-CUT blade modules in the housing, and hulls and simulated pellets were collected in the collection container. As a result, 80 pieces of simulated rodcut (brass pellets + Zry4 tube) were slit continuously without any problem. About 35 min was required to slit 80 rod-cuts and average decladding force was 260 kg. The decladding force of the ceramic simulated rod-cuts (castable) requires 25 kg less force than the brass pellets. Therefore, it is estimated that the spent fuel rod-cut can be fully split into three pieces using the mechanical decladder.

For safe and economical spent fuel management, assessing the integrity of the cladding, which is the first barrier to the escape of radioactive material, is very important. For the sake of risk assessment, it is essential to calculate the probability of failure of the spent fuel rods loaded inside the cask during the transportation or storage. However, due to the large amounts of calculations required, it is not practical to analyze every detail of the spent fuel rods and assemblies. This study presents a methodology to perform a cask-level analysis by sequentially simplifying the fuel rods and spent fuel assemblies for the calculation of fuel rod failure probability. A simplified single fuel rod model was generated by considering the material properties of a high burnup fuel rod stored in dry storage for approximately 5 years and the interfacial bonding conditions of the cladding tube. The simplified model produces the same deflection as the detailed model at the critical moment that produces a fracture plastic strain of 1%. The developed single fuel rod simplified model is assembled in a CE 16×16 configuration, and a methodology is presented in which the CE 16×16 assembly model is once again replaced by a simplified model with a cuboidal shape. Compression analyses were performed on each part of the CE 16×16 model to obtain isotropic property data, and a simplified model was created based on those data and the cross-sectional second moment values of the parts. A cask drop analysis was performed to validate the similarity of the CE 16×16 model and the simplified model by comparing important structural responses such as impact acceleration. The 20 simplified fuel assembly models and one detailed model were loaded into a cask to perform the drop analysis. For the detailed model, the impact acceleration was extracted for different loading positions and the corresponding impact load and pinch load were derived. The spring force and contact force corresponding to the pinch load were extracted by applying a Python script technique to extract the maximum value of them exerted on each fuel rod. The vulnerability of spent fuel rods to bending loads and the failure criteria were considered during the simplification process of a single fuel rod. From the extracted impact and pinch loads, the probability of failure of the spent fuel rods as a function of impact acceleration can be calculated.

Considering the domestic situation where all nuclear power plants are located on seaside, the interim storage site is also likely to be located on coastal site. Maritime transportation is inevitable and the its risk assessment is very important for safety. Currently, there is no independently developed maritime transportation risk assessment code in Korea, and no research has been conducted to evaluate the release of radioactive waste due to the immersion of transport cask. Previous studies show that the release rate of radionuclides contained in a submerged transport cask is significantly affected by the area of flow path generated at the breached containment boundary. Due to the robustness of a cask, the breach is the most likely generated between the lid and body of cask. CRIEPI investigated the effect of cask containment on the release rate of radioactive contents into the ocean and proposed a procedure to calculate the release rate considering the socalled barrier effect. However, the contribution of O-ring on the release rate was not considered in the work. In this study, test and analysis is performed to determine the equivalent flow path gap considering the influence of O-rings. These results will be implemented in the computational model to assess sea water flow through a breached containment boundary using CFD techniques to assess radionuclide release rates. To evaluate the release rate as a function of lid displacement, a small containment vessel is engineered and a metal O-ring of the Helicoflex HN type is installed, which is the most commonly used one in transport and storage casks. The lid of containment vessel is displaced in vertical and horizontal direction and the release rate of the vessel was quantified using the helium leak test and the pressure drop test. Through this work, the relationship between the vertical opening displacement and horizontal sliding displacement of the cask lid and the actual flow path area created is established. This will be implemented in the CFD model for flow rate calculation from a submerged transport cask in the deep sea. In addition, the compression of the O-ring causes very small gaps, such as capillaries. In these cases, Poiseuille’s law is used to calculate the capillary flow rate.

Pyroprocessing technology has emerged as a viable alternative for the treatment of metal/oxide used fuel within the nuclear fuel cycle. This innovative approach involves an oxide reduction process wherein spent fuel in oxide form is placed within a cathode basket immersed in a molten LiCl-Li2O salt operating at 923 K. The chemical reduction of these oxide materials into their metallic counterparts occurs through a reaction with Li metal, which is electrochemically deposited onto the cathode. However, during process, the generation of Li2O within the fuel basket is inevitable, and due to the limited reduction efficiency, a significant portion of rare earth oxides (REOx) remains in their oxide state. The presence of these impurities, specifically Li2O and REOx, necessitates their transfer into the electrorefining system, leading to several challenges. Both Li2O and REOx exhibit reactivity with UCl3, the primary electrolyte within the electrorefining system, causing a continuous reduction in UCl3 concentration throughout the process. Furthermore, the formation of fine UO2 powder within the salt system, resulting from chemical reactions, poses a potential long-term operational and safety concern within the electrorefining process.Various techniques have been developed to address the issue of UO2 fine particle removal from the salt, utilizing both chemical and mechanical methods. However, it is crucial that these methods do not interfere with the core pyroprocessing procedure. This study aims to investigate the impact of Li2O and REOx introduced from the electrolytic reduction process on the electrorefining system. Additionally, we propose a method to effectively eliminate the generated UO2 fine powder, thereby enhancing the long-term operational stability of the electrorefining process. The efficiency of this proposed solution in removing oxidized powder has been confirmed through laboratory-scale testing, and we will provide a comprehensive discussion of the detailed results.

After the decision of the Wolsong unit 1 permanent shutdown (2019), spent fuel stored in the spent fuel bay (hereafter, SFB) should be transported to a dry storage facility (MACSTOR or Canister) in order to decommission Wolsong unit 1. Accordingly, KHNP has established a shipment schedule for damaged fuel of Wolsong Unit 1 and is trying to complete the shipment according to the schedule. Wolsong is equipped with transportation casks and dry storage facilities, but baskets need to be manufactured separately. In addition, license approval is required for baskets, transport cask, and dry storage facilities for legal grounds to contain, transport, and store damaged fuels. In this paper, the initial model, upgrade model, and automation model of encapsulation equipment planned to be introduced in Canada to handle PHWR’s damaged fuel were compared, and the optimal model was selected in consideration of KHNP’s planned spent fuel shipment schedule. The PHWR’s damaged fuel encapsulation system is a system developed the PHWR’s damaged spent fuel to be handled in the same way as the existing PHWR when storing it in the dry storage facility and loading a basket for capsulation into transport cask. At the Gentilly-2 nuclear power plant in Canada, a manually operated encapsulation system was used due to the low quantity of damaged fuel, which can be encapsulated two bundles a day, and this model is an initial model. In the case of Wolsong Unit 1, it has about 300 damaged fuels, so it takes about nine months to work when using the initial model. The upgrade model developed to improve work efficiency and reliability has increased work efficiency through some automation, but it would take about eight months to process the damaged spent fuels of Wolsong Unit 1, and this model has not yet been manufactured and applied. Lastly, the automation model changed the work location outside the SFB and automated drainage/drying operations. It is easy to maintain and replace consumables because the work is carried out by lifting the damaged fuel to a shuttle outside the SFB surrounded by a shielding chimney. Considering the reduction of drainage/drying time, it is possible to save about four times as much time as the initial model. That is, if the automation model is used, it is judged that the supply of Wolsong Unit 1 can be processed in about two months. However, in terms of license, initial model and upgrade model are expected to be easier and the period is expected to be shortened. However, if licensing is carried out as soon as equipment design is completed, it is believed that the period can be shortened by parallel equipment manufacturing and licensing. It is judged that the best way to comply with the target schedule is to select an automation model with excellent work performance, develop equipment, and proceed with licensing at the same time. Accordingly, KHNP is in the process of designing equipment with the aim of using the automation model to take out damaged fuel for Wolsong Unit 1.

Molten salt reactor (MSR) uses fluoride or chloride based molten salt as a coolant of the system, and fuel materials are dissolved in the molten salt, therefore it can be act as both coolant and nuclear fuel. A few issues have arisen from early-stage research and development program of MSR from Oak Ridge National Laboratory, including corrosion of structural materials and fission product management. For investigating the effect of additives on corrosion of structural materials, Mg(OH)2 and MgCl2*6H2O are added into the NaCl-MgCl2 eutectic salt. Prepared chloride salt is injected into the autoclave in the glove box, as well as corrosion coupons for candidate structural materials for molten chloride salt reactor, SS316, Alloy 600, and C-276 are also prepared. The temperature is set as 700°C. After 500 h corrosion experiment, the samples are taken out from the autoclave, and they are analyzed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). SS316 samples show weight loss with all salt conditions, while Alloy 600 and C-276 show weight gain after the corrosion experiment.

The Spent Nuclear Fuel (SNF) cladding serves as the first barrier that prevents the release of radioactive materials. It is very important to maintain cladding integrity in SNF management. It is known that the pinch load applied to the cladding can lead to Mode-3 failure and the cladding becomes more vulnerable to this failure mode with the existence of radial hydrides and other forms of mechanical defects. In this study, a numerical analysis process was proposed to scientifically and systematically evaluate the fracture resistance of cladding with reoriented hydrides under pinch load. The mechanical behavior and fracture of the irradiated cladding under pinch load can be evaluated by Ring Compression Test (RCT). Under the stress field generated by RCT, the cracks propagate more easily through radial hydrides than circumferential hydrides. The δ-hydride which form within the α-zirconium matrix causes a large expansion strain due to the volume difference and voids form at the interface between the hydride and the zirconium matrix. Chan demonstrated that the load needed to form voids and separate the hard hydride precipitates from the Zr matrix is considerably lower than that which initiates brittle fracture of hydrides using a micro-cantilever test. Therefore, we propose a microstructure crack propagation analysis method based on Continuum Damage Mechanics (CDM) that can simulate fracture of hydride, zirconium matrix, and Zr/hydride interface. CDM is possible to simulate the hydride, zirconium matrix, and interface cracking in a continuum model based on cladding deformation. The RCT simulation model was constructed from the microscopic images of irradiated cladding. A pixel-based finite element model was created by separating the hydride, zirconium matrix, and interface using the image segmentation method on a morphology operation basis. The appropriate element size was selected for the efficiency of the analysis and crack propagation using CDM. The force-displacement curves and strain energy from RCT were compared and analyzed with the simulation results of different element sizes. The finalized RCT simulation model can be used to evaluate the fracture resistance of the irradiated cladding under the quantified pinch load and to establish the failure criterion of fuel rods under pinch load. The advantages and limitations of the proposed process are discussed.

The Republic of Korea (ROK), as a member state of the IAEA, is operating the State’s System of Accounting for and Control (SSAC) and conducting independent national inspections. Furthermore, an evaluation methodology for the material unaccounted for (MUF) is being developed in ROK to enhance capabilities of national inspection. Generally, physical and chemical changes of nuclear material are unavoidable due to the operating system and structure of facilities, an accumulation of material unaccounted for (MUF) has been issued. IAEA developed statistical MUF evaluation method that can be applied to all facilities around the world and it mainly focuses on the diversion detection of nuclear materials in facilities. However, in terms of the national safeguard inspection, an evaluation of accountancy in facilities is additionally needed. Therefore, in this research, a new approach to MUF evaluation is suggested, based on the Guide to the Expression of Uncertainty in Measurement (GUM) that an evaluation of measurement uncertainty factors is straightforward. A hypothetical list of inventory items (LII) which has 6,118 items at the beginning and end of the material balance period, along with 360 inflow and outflow nuclear material items at a virtual fuel fabrication plant was employed for both the conventional IAEA MUF evaluation method and the proposed GUM-based method. To calculate the measurement uncertainty, it was assumed that an electronic balance, gravimetry, and a thermal ionization mass spectrometer were used for a measurement of the mass, concentration, and enrichment of 235U, respectively. Additionally, it was considered that independent and correlated uncertainty factors were defined as random factors and systematic factors for the ease of uncertainty propagation by the GUM. The total MUF uncertainties of IAEA (σMUF) and GUM (uMUF) method were 37.951 and 36.692 kg, respectively, under the aforementioned assumptions. The difference is low, it was demonstrated that the GUM method is applicable to the MUF evaluation. The IAEA method demonstrated its applicability to all nuclear facilities, but its calculated errors exhibited low traceability due to its simplification. In contrast, the calculated uncertainty based on the GUM method exhibited high reliability and traceability, as it allows for individual management of measurement uncertainty based on the facility’s accounting information. Consequently, the application of the GUM approach could offer more benefits than the conventional IAEA method in cases of national safeguard inspections where factor analysis is required for MUF assessment.

Understanding the dispersion of xenon isotopes following a nuclear test is critical for global security and falls within the remit of both the Comprehensive Nuclear-Test-Ban Treaty (CTBT) and the International Noble Gas Experiment (INGE). This paper aims to show if it is possible to discriminate the source of xenon releases based on the atmospheric dispersion of xenon isotopes using HYSPLIT. Using ORIGEN and SERPENT simulations, four released scenarios are defined with four different fractionation times (i.e., 1 hour, 1 day, 10 days, and 30 days) after a 1kt TNT equivalent 235U explosion event. These time-delayed release scenarios were selected to certify the possibility of mis-determining xenon release source. We use the Lagrangian dispersion model for atmospheric dispersion to predict the concentration distribution of xenon isotopes under each scenario. The model allows us to better understand how these isotopes would distribute over time and space, offering valuable data for real-world detection efforts. To our knowledge, there have been no researches on the analysis of xenon isotopic ratios considering atmospheric dispersion. In this work, we focused on the atmospheric dispersion using HYSPLIT to characterize the xenon isotopic ratios from nuclear tests. In addition, we compared the xenon isotopic ratios obtained from the atmospheric dispersion with those from ORIGEN calculations, which would be helpful to discriminate the source of the xenon releases.

In this study, Bacillus velesensis TJS119, isolated from freshwater, demonstrated growth inhibition against insect pathogenic fungi. The culture medium of the B. velezensis TJS119 strain underwent sequential fractionation with n-hexane, chloroform, ethyl acetate, n-butanol, and water. Notably, the n-butanol fraction exhibited significant antifungal activity against Metarhizium anisopliae and Beauveria bassiana. LC/MS analysis of antifungal peaks identified the production of various lipopeptides by B. velezensis TJS119, including two types of iturin A (C14, C15), four types of fengycin A (C14, C15, C16, C17), and two types of fengycin B (C16, C17). The antifungal efficacy of Iturin A and Fengycin against insect pathogenic fungi was further validated using the paper disc diffusion method. These findings underscore the potential of B. velezensis TJS119 as a promising candidate for future research and applications in the realm of agricultural biological controls against fungal diseases.

Protaetia brevitarsis seulensis larvae from industrial insects are traditionally recognized as functional health foods in South Korea. We evaluated the immuno-modulatory effects of feeding beneficial microorganism (Bacillus velezensis TJS119) to P. brevitarsis larvae as a dietary source. In this study, we investigated the immune-enhancing activities of P. brevitarsis larvae hot-water extract (PLW) and PLW after treatment with B. velezensis TJS119 (PLWB) using the RAW 264.7 macrophage cell line. We examined the effects of PLWB on cell proliferation, cytokine production, and nitric oxide production in RAW264.7 cells. PLWB showed no cytotoxicity at concentrations ranging from 7.8 to 1,000 μg/mL in RAW264.7 cells. Treatment with PLWB increased the production of nitric oxide and pro-inflammatory cytokines [tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6), and interleukin-1β (IL-1β)] at doses of 62.5 to 1,000 μ g/mL in RAW264.7 cells. As a result, PLWB exhibited a stronger immune-enhancing effect compared to PLW. In conclusion, the results of this study offer experimental evidence to support the potential utilization of PLWB as an immunity-enhancing nutraceutical ingredient.