This study examines the effects of the public’s perception of emergency medical service (EMS) on the public health system’s brand equity and the moderating effect of governance on this relationship using Keller’s customer-based brand equity model. It uses four EMS functions: rescue/first-aid and transfer activities; disaster prevention, preparation, and response activities; educational activities in urgent situations; and medical treatment in emergency rooms to examine the effects of them on brand meaning of the public health system. Our findings are important for understanding the public as customers of the public health system and devising and/ or adapting healthcare policies and marketing strategies to develop brand equity and increase customers’ loyalty to the public health system.
이 연구는 교실상황에서 실현되는 성공적인 탐구활동을 위한 중요한 변수에는 무엇이 있으며 또한 학생들이 실시하는 과학탐구의 실행능력은 그 수준 정도가 어떻게 되는지를 조사하였다. 이 연구를 위해서 7학년 및 8학년의 과학 영재학생들이 설문지를 작성하고 과학탐구의 실행능력 평가를 위해 탐구문제제기 및 탐구설계를 직접적으로 할 수 있도록 하였다. 설문지는 성공적인 과학탐구 활동에 영향을 주는 요소를 개인적 및 상호적 변수로 나눠 파악하였으며, 240명의 과학영재학생들이 설문에 응답하였다. 이 외에 두 개의 다른 질문지에는 탐구문제를 제기할 수 있는 능력과 탐구설계과정 능력을 측정할 수 있는 문항이 포함되어 있었다. 결과는 다음과 같다. 개인적 변수로는 그룹활동 및 탐구 활동을 잘 할 수 있다는 확신과 과학탐구 가치를 높이 평가하고 있는 학습동기가 중요한 변수로 파악되었다. 또한 학생들의 성공적인 탐구활동에는 상호성 변수에는 그룹 편성, 과제종류, 물리적 환경, 그리고 교사의 역할이 중요한 성공 변수로 파악되었으며, 특히 그룹 편성은 학생들이 그룹탐구활동을 하는데 있어서 가장 중요하게 생각하는 변수로 파악되었다. 하지만 학생들의 탐구문제를 개발하는 능력이나 탐구설계를 하는 능력은 제한적으로 나타났다.
This study experimentally investigated dicyclohexylammonium 2-cyanoacrylate (CA) as a potential comonomer for polyacrylonitrile (PAN) based carbon fiber precursors. The P(AN-CA) copolymers with different CA contents (0.19-0.78 mol% in the feed) were polymerized using solution polymerization with 2,2-azobis(isobutyronitrile) as an initiator. The chemical structure and composition of P(AN-CA) copolymers were determined by proton nuclear magnetic resonance and elemental analysis, and the copolymer composition was similar to the feeding ratio of the monomers. The effects of CA comonomer on the thermal properties of its copolymers were characterized differential scanning calorimetry (DSC) in nitrogen and air atmospheres. The DSC curves of P(AN-CA) under nitrogen atmosphere indicated that the initiation temperature for cyclization of nitrile groups was reduced to around 235℃. The heat release and the activation energy for cyclization reactions were decreased in comparison with those of PAN homopolymers. On the other hand, under air atmosphere, the P(AN-CA) with 0.78 mol% CA content showed that the initiation temperature of cyclization was significantly lowered to 160.1℃. The activation energy value showed 116 kJ/mol, that was smaller than that of the copolymers with 0.82 mol% of itaconic acids. The thermal stability of P(AN-CA), evidenced by thermogravimetric analyses in air atmosphere, was found higher than PAN homopolymer and similar to P(AN-IA) copolymers. Therefore, this study successfully demonstrated the great potential of P(AN-CA) copolymers as carbon fiber precursors, taking advantages of the temperature-lowering effects of CA comonomers and higher thermal stability of the CA copolymers for the stabilizing processes.
Sr2Ta2O7, a layered perovskite compound, has been reported to possess most excellent photocatalytic properties among the layered perovskite materials. Recently, we have demonstrated that Ba5Ta4O15 that was prepared under a mol ratio of Ba: Ta=1:1 has high photocatalytic performance as well as Sr2Ta2O7. In this study, the photocatalyst samples with a mol ratio of Sr: Ba: Ta = (1-x): x: 1 were prepared. The maximum photocatalytic performance was obtained for x= 0.2, which is three times as high as that of undoped Sr2Ta2O7.
The performance of Li-ion system based on LiCoO2 and Graphite is well optimized for the 3C applications. The charge-discharge mode, the manufacturing process, the cell performance and the thermal reactions affecting safety has been explained in the engineering point of view. The energy density of the current LIB system is in the range of 300~400 Wh/l. In order to achieve the energy density higher than 500 Wh/l, the active materials should be modified or changed. Adopting new high capacity anode materials would be effective to improve energy density.
The time variations in relative humidity observed at the Gangjeong (Goryeong) Reservoir in the Nakdong River over a one-year period (September 2012–August 2013) were analyzed with the Bowen ratio. The thermal vertical scale of the reservoir was also evaluated following Yamamoto’s method. The study’s results showed that the relative humidity at the reservoir was higher than that of the Daegu Meteorological Observatory (inland) all year round. The difference was slightly larger at nighttime (17–20 %) than at daytime (13–15 %) in all seasons except summer. The quantitative order of latent heat flux was summer, spring, autumn, and winter. This finding signifies that the thermal vertical scale of the reservoir corresponds to that of a shallow lake. The Bowen ratio was smallest at midday of the summer season. In other words, the net radiation energy was converted more as latent heat flux than sensible heat flux during a higher temperature period.
Different with other fishes, the guppies (Poecilia reticulata) is ovoviviparity, which retain their fertilized eggs within the follicle throughout gestation. The synchronously growing diplotene oocytes store nutrients in droplets and yolk, before their maturation and fertilization. The lecithotrophic strategy of development entails the provisioning of embryos with resources from the maternal yolk deposit rather than from a placenta, it allows the extracorporeal culture of guppy embryo. Studies on their early development of live bearers like the guppy including lineage tracing and genetic manipulations, have been limited. Therefore, to optimize conditions of embryo in vitro culture, explanted embryos from pregnant females were incubated in embryo medium (L-15 medium, supplemented with 5, 10, 15, 20% fetal bovine serum, respectively). We investigated whether the contents of FBS in vitro culture medium impact the development of embryos, and whether they would hatch in vitro. Our study found that in 5% of FBS of the medium, although embryos developed significantly slower in vitro than in the ovary, it was impossible to exactly quantify the developmental delay in culture, due to the obvious spread in developmental stage within each batch of eggs, and embryos can only be maintained until the early-eyed. And although in culture with 20% FBS the embryos can sustain rapid development of early stage, but cannot be cultured for the entire period of their embryonic development and ultimately died. In the medium with 10% and 15% FBS, the embryos seems well developed, even some can continue to grow after follicle ruptures until it can be fed. We also observed that embryonic in these two culture conditions were significantly different in development speed, in 15% it is faster than 10%. But 10% FBS appears to be more optimizing condition than 15% one on development process of embryos and survival rate to larvae stage.
We examined urban heat island intensity in Seongseo, Dae gu, South Korea, where a large area of water is located within the suburb. We found a maximum urban heat island intensity of 4.2℃, which occurred around 7 PM in the summer season. Throughout the remainder of the year, we observed the largest heat island intensity levels during late night hours. In contrast, the winter season displayed the smallest values for heat island intensity. Our results conflicted with heat island intensity values for cities where suburbs did not contain water areas. Generally, cities with suburbs lacking water displayed the largest heat island intensity levels before sunrise in the winter season. We also observed negative urban heat island intensity levels at midday in all seasons except for the summer, which is also in contrast with studies examining suburbs lacking water areas. The heat island intensity value observed in this study (4.2℃) was relatively large and fell between the averages for, Asia and Europe according to the relationship between urban population and heat island intensity.
This study has assessed the anti-oxidative activities and cytotoxic effects of Lithospermum erythrorhizon ethanol extract and measured the effects of tyrosinase inhibition activities with a goal of estimating the usage of the medicinal plant as an ingredient of cosmetics. First, to perform a basic test on the extract, pH and UV-spectrum were measured. According to the measurement, the extract had control functions at pH 5.5, and maximum absorbance occurred at 530nm. In particular, DPPH (1-1-diphenyl-2-picryl-hydrazyl)-inhibiting activity (IC50) and polyphenol content were 149.81 μg/mL and 51.28±2.52 mg/mL respectively. In addition, as extract concentration increased, tyrosinase inhibition activities improved as well. In raw 264.7 cell-based MTT assay, cell survival rates were 98% at 1000 ppm and 153% at 100 ppm. Therefore, it's been confirmed that there is almost no cytotoxin. According to the test results above, it appears that the Lithospermum erythrorhizon ethanol extract would be effective in anti-oxidation and application as a cosmetic ingredient.
The ovarian cycle, the biological minimum size, and artificial spawning frequency by artificial spawning induction of the female hard clam, Meretrix petechialis, were investigated by histological observations and morphometric data. The ovarian cycle of this species can be classified into five successive stages: early active stage, late active stage, ripe stage, partially spawned stage, and spent/inactive stage. The spawning period was from June to September, and the main spawning occurred between July and August when the seawater temperature exceeds over . The biological minimum size (shell length at 50% of first sexual maturity) in females were 40.39 mm in shell length (considered to be two years of age), and all clams over 50.1 mm in shell length sexually matured. In this study, the mean number of the spawned eggs by spawning induction increased with the increase of size (shell length) classes. In case of artificial spawning induction for the clams > 40.39 mm, the number of spawned eggs from the clams of a sized class was gradually decreased with the increase of the number of the spawning frequencies (the first, second, and third spawning). In the experiments of artificial spawning induction during the spawning season, the interval of each spawning of this species was estimated to be 15-18 days (approximately 17 days).
The ultrastructural characteristics of germ cell differentiations during spermatogenesis and mature sperm morphology in male () were evaluated via transmission electron microscopic observation. The accessory cells, which contained a large quantity of glycogen particles and lipid droplets in the cytoplasm, are assumed to be involved in nutrient supply for germ cell development. Morphologically, the sperm nucleus and acrosome of this species are ovoid and conical in shape, respectively. The acrosomal vesicle, which is formed by two kinds of electron-dense or lucent materials, appears from the base to the tip: a thick and slender elliptical line, which is composed of electron-dense opaque material, appears along the outer part (region) of the acrosomal vesicle from the base to the tip, whereas the inner part (region) of the acrosomal vesicle is composed of electron-lucent material in the acrosomal vesicle. Two special characteristics, which are found in the acrosomal vesicle of A. () in Pinnidae (subclass Pteriomorphia), can be employed for phylogenetic and taxonomic analyses as a taxonomic key or a significant tool. The spermatozoa were approximately in length, including a sperm nucleus (about in length), an acrosome (about in length), and a tail flagellum (about ). The axoneme of the sperm tail evidences a 9+2 structure.
Korean Japonica resistant rice cultivars mainly posses one of the genes, Xa1 or Xa3 for BB resistance. These resistance genes are becoming susceptible to K3a, resulting in the breakdown of resistance of Japonica cultivars. Especially, glutinous rice cultivars exhibit high susceptibility to bacterial blight(BB) in Korea. This study was carried out to develop glutinous Japonica near-isogenic lines(NILs) conferring useful single gene such as Xa2, Xa3, xa5, Xa21, etc. Six NILs conferring Xa2, Xa3, xa5, xa8, Xa14 and Xa21 genes were developed. Six NILs with Sangjuchalbyeo genetic background were selected by DNA markers and inoculation of K1, K2, K3 and K3a race. NILs having Xa14 was resistant to K1 and susceptible to K2, K3 and K3a. NILs with Xa2 and xa8 was resistant to K1, K2 and susceptible to K3 and K3a. NIL with Xa3 was resistant to K1, K2, K3, but susceptible to K3a. NIL with xa5 was resistant to K1, K2, K3, and K3a. NIL having Xa21 was susceptible to K1, while resistant to K2, K3 and K3a. Identification of xa5 and Xa21 genes were carried out by STS markers. Heading date of NILs ranged from Jul. 31 to Aug. 6. Culm length, No. of grains per panicle and ratio of ripened grain of NILs were a little different to those of Sangjuchalbyeo. Milled rice of NILs were ranged from 437kg/10a to 463. Agronomic traits of NILs containing Xa2, Xa3, xa5, xa8, Xa14 and Xa21 were similar or a little different to those of recurrent parent. These NILs would be useful to develop durable resistant glutinous varieties in Korea.
Japonica rice cultivars exhibit high susceptibility to BB disease due to genetic vulnerability in Korea. Korean Japonica rice cultivars mainly posses the genes, Xa1 and Xa3 for BB resistance. These resistance genes are becoming susceptible to K3a, new races of BB, resulting in the breakdown of resistance in high yielding Japonica cultivars. It is imperative to look for novel R-genes for improvement of japonica rice resistant to BB races. This study was carried out to conform useful single gene resistant to 24 BB isolates (including K3a, HB01009) breaking down Xa3 gene. Cultivars and near-isogenic lines (NILs) carrying Xa1, Xa2, xa8, Xa10, Xa11, xa13 genes were susceptible to 24 isolates, whereas IRBB4 carrying Xa4 gene was moderate resistance. IRBB5 and IRBB21 having xa5 and Xa21 genes, respectively, expressed resistance to these isolates. IRBB7 having Xa7 gene showed resistance response to 24 BB isolates, whereas JBB-107 carrying Xa7 gene was susceptible to 10 BB isolates and moderate resistant to 14 BB isolates. Xa7 gene showed different resistance response according to genetic background of used recurrent parent. With these findings, Xa4, xa5, and Xa21 would be the most prospective genes to 24 isolates used in screening.
This study was carried out to investigate the antioxidative enzymes and isozymes between chilling-tolerant and -susceptible varieties at the booting stage under cold water stress (13~circC) in japonica rice. Total SOD, CAT, POX, and GR activities on the basis of protein were found to be important factors to defend cold water stress. Especially, SOD and CAT activities showed distinctive differences between chilling-tolerant and -susceptible varieties. Chilling-tolerant varieties were higher than chilling-susceptible varieties for SOD and CAT activities. One of eight isozyme bands for SOD was a inducible isoform. Three isozymes for CAT and one isozyme for POX were closely correlated with defense to cold water stress. Total GR activities except Stejaree 45 on the basis fresh weight and POX were increased by cold water stress, but there was no difference between chilling-tolerant and -susceptible varieties.