As nuclear power plants are operated in Korea, low and intermediate-level radioactive wastes and spent nuclear fuels are continuously generated. Due to the increase in the amount of radioactive waste generated, the demand for transportation of radioactive wastes in Korea is increasing. This can have radiological effect for public and worker, risk assessment for radioactive waste transportation should be preceded. Especially, if the radionuclides release in the ocean because of ship sinking accident, it can cause internal exposure by ingestion of aquatic foods. Thus, it is necessary to analyze process of internal exposure due to ingestion. The object of this study is to analyze internal exposure by ingestion of aquatic foods. In this study, we analyzed the process and the evaluation methodology of internal exposure caused by aquatic foods ingestion in MARINRAD, a risk assessment code for marine transport sinking accidents developed by the Sandia National Laboratory (SNL). To calculate the ingestion internal exposure dose, the ingestion concentrations of radionuclides caused by the food chain are calculated first. For this purpose, MARINRAD divide the food chain into three stages; prey, primary predator, and secondary predator. Marine species in each food chain are not specific but general to accommodate a wide variety of global consumer groups. The ingestion concentrations of radionuclides are expressed as an ingestion concentration factors. In the case of prey, the ingestion concentration factors apply the value derived from biological experiments. The predator's ingestion concentration factors are calculated by considering factors such as fraction of nuclide absorbed in gut, ingestion rate, etc. When calculating the ingestion internal exposure dose, the previously calculated ingestion concentration factor, consumption of aquatic food, and dose conversion factor for ingestion are considered. MARINRAD assume that humans consume all marine species presented in the food chain. Marine species consumption is assumed approximate and conservative values for generality. In the internal exposure evaluation by aquatic foods ingestion in this study, the ingestion concetration factor considering the food chain, the fraction of nuclide absorbed in predator’s gut, ingestion rate of predator, etc. were considered as influencing factors. In order to evaluate the risk of maritime transportation reflecting domestic characteristics, factors such as domestic food chains and ingestion rate should be considered. The result of this study can be used as basis for risk assessment for maritime transportation in Korea.

Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.

Level measurement of liquid radwaste is essential for inventory management of treatment system. Among various methods, level measurement based on differential pressure has many advantages. First, it is possible to measure the liquid level of the system regardless of liquid type. Second, as the instrument doesn’t need to be installed near the tank, there is no need to contact the tank when managing it. Therefore, workers’ radiation dose from the system can be decreased. Finally, although it depends on the accuracy, the price of the instrument is relatively low. With these advantages, in general, liquid radwaste level in a tank is measured using differential pressure in the treatment system. Not only the advantages described above, there are some disadvantages. As the liquid in the system is waste, it is not pure but has some suspended materials. These materials can be accumulated in tanks and pipes where the liquids move to come into direct contact with pneumatic pipes that are essential in differential pressure instruments. As a result, in case of a treatment using heat source, the accumulated materials may become sludge causing interference in pneumatic pipes. And this can change the pressure which also affects the level measured. In conclusion, in case of liquid storage tanks in which the situation cannot be checked, the proficiency of an operator becomes important.

The timescale of safety assessment for a geological disposal system is considered up to hundreds of thousands of years when the radionuclides in spent nuclear fuel decay to levels comparable to natural radioactivity. During this long period, a variety of climate changes are expected to occur, including variations in temperature and precipitation as well as long-term sea level changes and glacial cycles. These climate changes can either directly affect water balance components or indirectly affect water balance by altering terrain and vegetation that have an impact on water balance. Water balance is a significant element of safety assessment, because it affects the radionuclide transport via groundwater flow, which in turn affects the radiological risk to humans and other biotas. Therefore, it is important to understand the hydrologic response to climate changes for proving the long-term safety of the disposal system. To this end, this study performed hydrological simulations using the SWAT (Soil and Water Assessment Tool) for several climate change scenarios. SWAT is the watershed-scale hydrological model developed by the USDA-ARS (United States Department of Agriculture - Agricultural Research Service) and has been widely used to quantify the water balance in a watershed. It calculates the hydrologic cycle based on the water balance equation with different physical processes for water balance components such as evapotranspiration, surface runoff, and groundwater recharge. This study assumed several climate change scenarios (e.g., variations in temperature and precipitation, sea level change, and formation of permafrost) and analyzed how the components of the water balance would respond under different scenarios and which scenarios would have the greatest impact on the water balance. These findings can provide valuable insights for future long-term safety assessments on the Korean Peninsula and can also be used as input data for the biosphere module of APro (Adaptive process-based total system performance assessment framework).

The engineered barrier system (EBS) is an indispensable element of a deep geological repository (DGR) designed to prevent the discharge of radioactive materials into the environment. The buffer material is a vital component of the EBS by creating a physical and chemical barrier that prevents the migration of radioactive materials. In the disposal environment, gases can be generated from the corrosion of the canister. When the gas generation rate exceeds the diffusion rate, the buffer material’s performance can deteriorate by the physical damage induced by the increase in pore pressure. Therefore, understanding the EBS’s behavior under gas generation conditions is crucial to guarantee the longterm safety and performance of the DGR. Lab-scale and field-scale experiments have been conducted to examine the stability of the buffer material concerning gas generation and movement by the previous researchers. To evaluate long-term stability for more than 100,000 years, it is essential to assess stability using a numerical model verified by these experiments. This study investigated the effect of interfacial characteristics on the numerical modeling accuracy of experimental simulation while verifying a numerical model through field-scale experimental results. The findings of this study are expected to furnish fundamental data for establishing numerical analysis guidelines for the longterm stability assessment of disposal systems.

The Korean Nuclear Safety and Security Commission has established a general guideline for the disposal of high-level waste, which requires that radiological effects from a disposal facility should not exceed the regulatory safety indicator, a radiological risk. The post-closure safety assessment of the disposal facility aims to evaluate the radiological dose against a representative person, taking into account nuclide transport and exposure pathways and their corresponding probabilities. The biosphere is a critical component of radiation protection in a disposal system, and the biosphere model is concerned with nuclide transport through the surface medium and the doses to human beings due to the contaminated surface environment. In past studies by the Korea Atomic Energy Research Institute (KAERI), the biosphere model was constructed using a representative illustration of surface topographies and groundwater conditions, assuming that the representative surface environment would not change in the future. Each topography was conceptualized as a single compartment, and distributed surface contamination over the geometrical domain was abstracted into 0D. As a result, the existing biosphere model had limitations, such as a lack of quantitative descriptions of various transport and exposure pathways, and an inability to consider the evolution of the surface environment over time. These limitations hinder the accurate evaluation of radiological dose in the safety assessment. To overcome these limitations, recent developments in biosphere modeling have incorporated the nuclide transport process over a 2D or 3D domain, integrating the time-dependent evolution of the surface environment. In this study, we reviewed the methodology for biosphere modeling to assess the radiological dose given by distributed surface contamination over a 2D domain. Based on this review, we discussed the model requirements for a numerical module for biosphere dose assessment that will be implemented in the APro platform, a performance assessment tool being developed by the KAERI. Finally, we proposed a conceptual model for the numerical module of dose assessment.

Spent Fuel Pool Island (SFPI) is a spent nuclear fuel storage pool that operates independently of existing nuclear facilities to safely manage SNF and minimize maintenance costs during the nuclear decommissioning process. Since the radiation controlled area can be dismantled before transporting SNF to a dry storage facility, the overall decommissioning period can be shortened, and the risk of occupational exposure during dismantling is reduced. In the US, various nuclear power plants have introduced SFPI for this reason. In this paper, to analyze the economic feasibility of application of SFPI to nuclear power plants to be decommissioned, several scenarios are established in consideration of the decommissioning plan and schedule, SFPI and dry storage facility application schedule. Cost and benefit list (SFPI application cost, SNF management cost, SNF dry storage cask cost, etc.) for each alternative were derived, and economic analysis was conducted by applying the Net Present Value (NPV). As a result of the analysis, it is found that the application of SFPI during decommissioning is economically effective as the NPV showed a positive number even when uncertainty was taken into account.

Molten Salt Reactor (MSR) is one of Generation-IV nuclear reactors that uses molten salts as a fuel and coolant in liquid forms at high temperatures. The advantages of MSR, such as safety, economic feasibility, and scalability, are attributed from the fact that the molten salt fuel in a liquid state is chemically stable and has excellent thermo-physical properties. MSR combines the fuel and coolant by dissolving the actinides (U, Th, TRU, etc.) in the molten salt coolant, eliminating the possibility of a core meltdown accident due to loss of coolant (LOCA). Even if the molten salt fuel leaks, the radioactive fission products dissolved in the molten salt will solidify with the fuel salt at room temperature, preventing potential leakage to the outside. MSR was first demonstrated at ORNL starting with the Aircraft Reactor Experiment (ARE) in 1954 and was extended to the 7.4 MWth MSRE developed in 1964 and operated for 5 years. Recently, various start-ups, including TerraPower, Terrestrial Energy, Moltex Energy, and Seaborg, have been conducting research and development on various types of MSR, particularly focusing on its inherent safety and simplicity. While in the past, fluoride-based molten salt fuels were used for thermal neutron reactors, recently, a chlorine-based molten salt fuel with a relatively high solubility for actinides and advantageous for the transmutation of spent nuclear fuel and online reprocessing has been developing for fast neutron spectrum MSRs. This paper describes the development status of the process and equipment for producing highpurity UCl3, a fuel material for the chlorine-based molten salt fuel, and the development status of the gas fission product capturing technologies to remove the gaseous fission products generated during MSR operation. In addition, the results of the corrosion property evaluation of structural materials using a natural circulation molten salt loop will also be included.