When the parent radionuclide decays, the progeny radionuclide is produced. Accordingly, the dose contribution of the progeny radionuclide should be considered when assessing dose. For this purpose, European Commission (EC) and International Atomic Energy Agency (IAEA) provide weighting factors for dose coefficient. However, these weighting factors have a limitation that does not reflect the latest nuclide data. Therefore, in this study, we analyzed the EC and IAEA methodology for derivation of weighting factor and used the latest nuclide data from ICRP 107 to derive weighting factors for dose coefficient. Weighting factor calculation is carried out through 1) selection of nuclide, 2) setting of evaluation period, and 3) derivation based on ICRP 107 radionuclide data. Firstly, in order to derive the weighting factor, we need to select the radionuclides whose dose contribution should be considered. If the half-life of progeny radionuclides sufficiently short compared to the parent radionuclide to achieve radioactive equilibrium, or if the dose coefficient is greater of similar to that of the parent radionuclide and cannot be ignored, the dose contribution of the progeny radionuclide should be considered. In order not to underestimate the dose contribution of progeny radionuclides, the weighting factors for the progeny nuclides are taken as the maximum activity ratio that the respective progeny radionuclides will reach during a time span of 100 years. Finally, the weighting factor can be derived by considering the radioactivity ratio and branch fraction. In order to calculate the weighting factor, decay data such as the half-life of the radionuclide, decay chain, and branch fraction are required. In this study, radionuclide data from ICRP 107 was used. As a result of the evaluation, for most radionuclides, the weighting factors were derived similarly to the existing EC and IAEA weighting factors. However, for some nuclides, the weighting factors were significantly different from EC and IAEA. This is judged to be a difference in the half-life and branch fraction of the radionuclide. For example, in the case of 95Zr, the weighting factor for 95mNb showed a 35.8% difference between this study and previous study. For ICRP 38, when 95Zr decays, the branch fraction for 95mNb is 6.98×10-3. In contrast, for ICRP 107, the branch fraction is 1.08×10-2, a difference of 54.7%. Therefore, the weighting factor for the dose coefficient based on ICRP 107 data may differ from existing studies depending on the half-life and decay information of the nuclide. This suggests the need for a weighting factor based on the latest nuclide data. The results of this study can be used as a basis for the consideration of dose contributions for progeny radionuclides in various dose assessments.

한국형아유르베다 성격유형과 의류 구매만족과 어떤 관계가 있는지를 분석함으로써 성격특성을 고려한 마케팅 전략에 대해 논의하는 것이다. 본 연구의 자료는 수도권 여성 20대 이상을 대상으로 다음과 같은 통계 분석을 실시하였다. 첫째, 조사대상자의 일반적 특성을 파악하기 위해 빈 도분석을 실시하였고, 둘째, 측정도구의 타당성 분석을 위해 탐색적 요인 분석을 실시하였다. 또한 Cronbach's α 계수를 이용하여 요인을 구성 하는 항목들의 신뢰도를 분석하였다. 셋째, 한국형 아유르베다 기본심리 유형에 대해 알아보고, 조사대상자의 일반적 특성에 따라 차이가 있는지 파악하기 위해 교차분석을 실시하였다. 넷째, 한국형 아유르베다 기본심 리유형에 따라 고객만족에 차이가 있는지를 알아보기 위하여 일원변량분 석(one-way ANOVA) 및 Scheffe의 사후검정을 실시하였다. 본 연구는 한국형아유르베다 기본심리유형과 고객만족의 관계에서는, 전반적인 고 객만족과 하위요인별 서비스만족에 있어서도 카파형(K)이 상대적으로 높 은 것을 알 수 있었지만, 품질만족에 있어서는 통계적으로 유의미한 차 이가 나타나지 않았다는 것을 알 수 있었다.

Until now, in case of Palaearctic region, only one species, Nesendaeus monochrous in this genus was recorded from China. but the biology and life cycle are not clearly known, yet. This species collected from the bud of Glochidion chodoense in Korea for the first time and closely related to Heterochyromera imerodeus Kojima & Morimoto which was recorded only in Japan,. But Nesendaeus monochrous is easily distinguishable from H. imerodeus by the relatively longer elytra with bisinuately round apices. Heterochyromera imerodeus Kojima & Morimoto can be found from Eurya emarginata and Glochidion obovatum in Japan. So, this two species are closely related each other and need more taxonomic study about the generic synonymy or changing the generic position.

모기는 감염병을 매개하는 종으로 전염병 확산 억제를 위해서는 개체수의 감시와 정확한 예측이 필요하다. 본 연구에서는 모기 개체수 및 기상 및 현장 자료를 활용해 모기 개체수 머신러닝 모델을 개발하였다. 모기 개체수는 디지털 모기 측정기(Digital Mosquito Monitoring System, DMS)의 2015 년~2022년의 5월~10월의 자료를 활용하였다. 기상 자료는 기온, 강수량, 풍속, 습도를 사용하였으며, 현장 조사 자료는 현장을 명목척도와 서열척도로 나누어 기록하여, 명목 척도의 경우 원핫 인코딩으 로 변환해 수치화하여 사용하였다. 분석에 사용된 머신러닝 모델은 Artificial Neural Network, Random Forest, Gradient Boosting Machine, Support Vector Machine이며 성능지표로 R2, RMSE를 사용하였다. 연구 결과, Gradient Boosting 모델이 R2 0.4, RMSE 22.45로 가장 좋은 성능을 나타냈다. 현장 조사 자료 를 분석에 활용하였을 때 R2는 증가하였고, RMSE는 감소하였다. 본 연구 결과 모기 개체수에 현장 조사 자료가 예측 정확도를 향상시킬 수 있음을 확인하였다.

This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.

In factory automation, efforts are being made to increase productivity while maintaining high-quality products. In this study, a CNN network structure was designed to quickly and accurately recognize a cigarette located in the opposite direction or a cigarette with a loose end in an automated facility rotating at high speed for cigarette production. Tobacco inspection requires a simple network structure and fast processing time and performance. The proposed network has an excellent accuracy of 96.33% and a short processing time of 0.527 msec, showing excellent performance in learning time and performance compared to other CNN networks, confirming its practicality. In addition, it was confirmed that efficient learning is possible by increasing a small number of image data through a rotation conversion method.

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

본 연구는 탄소 흐름 관점에서 기존 농촌경관 시스템 구조를 분석하고 이를 토대로 탄소중립 농촌경 관으로 전환하기 위한 자연기반해법을 제시하였다. 농촌경관 시스템은 생산경관, 자연경관, 생활경 관 하위 시스템으로 구성되어 있었으며, 각 하위 시스템을 인과지도 작성하고 이를 통합하였다. 통합 인과지도를 분석한 결과, 토지 이용 및 인간 활동 관리와 피드백 루프의 재구축을 위한 자연기반해법 전략이 필요하다는 것을 확인하였다. 이를 기반으로 본 연구는 ‘토양유기탄소 보존을 위한 탄소 농 업’, ‘탄소 흡수원 경관 관리’, ‘기후스마트 농업’, 그리고 ‘신재생에너지 기반 순환 농업’을 제안하였 다. 본 연구 결과는 기존 생산과정 중심의 농촌지역의 탄소중립 정책에서 벗어나 농촌경관 시스템의 전반적인 탄소 흐름을 확인하여 자연기반해법을 제시하였다는 데에 의의가 있다.

본 연구는 360도 파노라마 동영상을 활용하여 해상풍력 경관의 유형을 분류하고 유형별 경관 선호 매 트릭스 요소에 따른 경관 선호도를 분석하고자 한다. 이를 위해 첫째, 연구대상지로 제주 탐라해상풍력 단지로 선정하였으며, 연구대상지를 조망할 수 있는 지점들을 추출하고 방문하여 360도 파노라마 동영 상을 촬영하였다. 둘째, 구축된 360도 파노라마 동영상 자료를 바탕으로 경관의 미학적 특성을 분석하 고 해상풍력 경관의 유형을 분류했다. 셋째, 해상풍력 경관의 유형별로 경관 선호 매트릭스 요소와 경관 선호도를 설문조사했다. 넷째, 수집된 데이터를 활용하여 해상풍력 경관 유형별 선호 매트릭스 요소에 따른 경관 선호도 관계를 분석했다. 분석 결과 해상풍력 경관 유형이 High Continuity(HCN), High Color (HCL), Low Visual Impact(LVI), High Visibility(HVI)로 분류되었다. 또한, HCN경관 선호도에 영향을 주 는 요소로는 응집성이, HCL경관 선호도에 영향을 주는 요소로는 응집성과 신비성이, LVI경관 선호도 에 영향을 주는 요소로는 응집성과 복잡성이, HVI 경관 선호도에 영향을 주는 요소로는 응집성과 가독 성이 도출되었다. 본 연구 결과를 바탕으로 해상풍력 경관 선호도 향상을 위한 전략으로 (1)시각적 영향 을 줄일 수 있는 식재계획 및 동선설계, (2)해상풍력 터빈의 생상 대비 극대화, (3)해상풍력 터빈 설치전 경관 시뮬레이션을 제안하였다.

Kori unit 1, the first PWR (Pressurized Water Reactor) in Korea, was permanent shut down in 2017. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. Solid radioactive waste depending on the characteristics of the generation was classified into reactor vessel and reactor vessel internal, large components, small metals, spent nuclear fuel storage racks, insulation, wires, concrete debris, scattering concrete, asbestos, mixed waste, soil, spent resins and filters, and dry active waste. Radiological characterization of solid radioactive waste is performed to determine the characteristics of radioactive contamination, including the type and concentration of radionuclides. It is necessary to ensure the representativeness of the sample for the structures, systems and components to be evaluated and to apply appropriate evaluation methods and procedures according to the structure, material and type of contamination. Therefore, the radiological characterization is divided into concrete and structures, systems and components, and reactor vessel, reactor vessel internal and bioshield concrete. In this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. The results of this study can be used as a basis for the preparation of the FDP for the Kori unit 1.

Wolsong unit 1, the first PHWR (Pressurized Heavy Water Reactor) in Korea, was permanent shut down in 2019. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, activation assessment and waste classification of the End shield, which is a major activation component, were conducted. MCNP and ORIGEN-S computer codes were used for the activation assessment of the End shield. Radioactive waste levels were classified according to the cooling period of 0 to 20 years in consideration of the actual start of decommissioning. The End shield consists of Lattice tube, Shielding ball, Sleeve insert, Calandria tube shielding sleeve, and Embedment Ring. Among the components composed for each fuel channel, the neutron flux was calculated for the components whose level was not predicted by preliminary activation assessment, by dividing them into three channel regions: central channel, inter channel, and outer channel. In the case of the shielding ball, the neutron flux was calculated in the area up to 10 cm close to the core and other parts to check the decrease in neutron flux with the distance from the core. The neutron flux calculations showed that the highest neutron flux was calculated at the Sleeve insert, the component closest to the fuel channel. It was found that the neutron flux decreased by about 1/10 to 1/20 as the distance from the core increased by 20 cm. The outer channel was found to have about 30% of the neutron flux of the center channel. It was found that no change in radioactive waste level due to decay occurred during the 0 to 20 years cooling period. In this study, activation assessment and waste classification of End Shield in Wolsong unit 1 was conducted. The results of this study can be used as a basis for the preparation of the FDP for the Wolsong unit 1.

디지털로 시작된 세대 간의 지식전복과 이에 따른 격차는 게임이라는 콘텐츠를 통해 그 차이점을 드러낼 것이라는 것을 가정하고 본 연구를 수행하였다. 이를 증명하기 위해 실제 부모의 게임에 관한 인식이 자녀 의 삶에 중요한 변수로 자리를 잡고 있는지 분석해 보는 것이 본 연구를 통해 알아보고자 하는 것이 주요 내용이었다. 분석 결과, 부모의 게임인식은 자녀의 삶에 직접적으로 영향을 미치진 않았다. 하지만 자녀가 판단했을 때 부모의 게임인식 수준은 자녀의 삶의 만족도에 상당한 영향을 미치고 있는 것으로 확인이 되 었다. 이는 부모가 스스로 판단하는 게임인식보다, 디지털 세대인 자녀의 게임 활동과 문화를 어떻게 인식 하고 대하는지에 따라 자녀의 행복에 영향을 미친다는 것이다. 본 연구의 결과는 자녀가 인식하는 부모의 게임인식과 자녀의 게임인식 간의 격차는 청소년 자녀의 행복에 매우 중요한 요인으로 작용을 하며, 이는 청소년 자녀의 게임 활동을 부모세대가 꼭 배우고 습득하는 것만이 자녀 세대를 이해하는 길이 아니라, 자 녀와 함께 소통하면서 현재의 상황을 이해하는 것이 보다 중요한 요인으로 나타났다고 할 수 있다. 시대적 상황에 의하여 한 가정 내에 부득이하게 발생한 문화적 취향의 차이지만, 이를 부모가 인정하고 이해하는 방향으로 소통을 진행한다면 자녀의 삶에 매우 긍정적인 영향을 줄 수 있다는 것을 의미하기도 한다.

Currently, low and intermediate-level radioactive wastes and spent nuclear fuels are continuously generated in Korea. For the disposal of the radioactive wastes, the transport demand is expected to increase. Prior to transportation, it is necessary to evaluate the radiation risk of transportation to confirm that is not high. In Korea, there is no transportation risk assessment code that reflects domestic characteristics. Therefore, foreign assessment codes are used. In this study, before developing the overland transportation risk assessment code that reflects domestic characteristics, we analyzed the radiation risk assessment methodology in transportation accident codes developed in other countries. RADTRAN and RISKIND codes were selected as representative overland transportation risk assessment codes. For the two codes we analyzed accident scenarios, exposure pathways, and atmospheric diffusion. In RADTRAN, the user classifies accident severity for possible accident scenarios, and the user inputs the probability for each accident severity. On the other hand, in the case of RISKIND, the accident scenarios are classified and the probabilities are determined according to the NRC modal study (LLNL, 1987) in consideration of the cask impact velocity, cask impact angle, and fire temperature. In the case of RISKIND, the accident scenarios are applied only to transportation of spent nuclear fuel, and cannot be defined for low and intermediate-level radioactive waste. However, in the case of RADTRAN, since the severity and probability of accidents are defined by user, it can be applied to low and intermediate-level radioactive wastes. As the exposure pathways considered in transportation accident, both RADTRAN and RISKIND consider external exposure (cloudshine and groundshine), and internal exposure (inhalation, resuspension inhalation and ingestion). In the case of RADTRAN, additionally, external exposure due to loss of shielding (LOS) is considered. Atmospheric diffusion calculation is essential to determine the extent to which radioactive materials are diffused. In both RADTRAN and RISKIND, atmospheric diffusion calculations are based on Gaussian diffusion model. Users must input Pasquill stability class, release height, heat release, wind speed, temperature and mixing height, etc. Additionally, RADTRAN can input weather information relatively simply by inputting only the Pasquill stability class fraction and selecting the US average weather option. This study results will be used as a basis for developing radioactive waste overland transportation risk assessment code that reflects domestic characteristics.