The occurrence of shear failure in a rock mass, resulting from the sliding of joint surfaces, is primarily influenced by the surface roughness and contact area of these joints. Furthermore, since joints serve as crucial conduits for the movement of water, oil, gas, and thermal energy, the aperture and geometric complexity of these joints have a significant impact on the hydraulic properties of the rock mass. This renders them critical factors in related industries. Therefore, to gain insights into the mechanical and hydraulic behavior of a rock mass, it is essential to identify the key morphological characteristics of the joints mentioned above. In this study, we quantified the morphological characteristics of tensile fractures in granitic rocks using X-ray CT imaging. To accomplish this, we prepared a cylindrical sample of Hwang-Deung granite and conducted splitting tests to artificially create tensile fractures that closely resemble rough joint surfaces. Subsequently, we obtained 2D sliced X-ray CT images of the fractured sample with a pixel resolution of approximately 0.06 mm. By analyzing the differences in CT numbers of the rock components (e.g., fractures, voids, and rock matrix), we isolated and reconstructed the geometric information of the tensile fracture in three dimensions. Finally, we derived morphological characteristics, including surface roughness, contact area, aperture, and fracture volume, from the reconstructed fracture.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.

For safe management of spent nuclear fuels, they should be delivered to repository or waste disposal site. As the amount of spent nuclear fuel transportation is expected to increase in the future due to the provision of an intermediate storage facility, the necessity to secure transportation cask is emerging. In order to secure the spent nuclear fuel transportation cask, it is necessary to analyze the regulatory processes for domestic and foreign spent nuclear fuel transportation cask. In this study, the regulatory processes for domestic and foreign spent nuclear fuel transportation cask was analyzed. In this study, the IAEA, US, and Korea spent nuclear fuel transportation cask regulatory processes were analyzed. The domestic and foreign spent nuclear fuel transportation cask regulatory processes consist of design phase, manufacturing phase, and operation phase. In the design stage, the transport requirements are designed in accordance with the safety requirements of international organizations and countries. The application to be submitted when applying for approval should include a safety analysis report, evidence proving compliance with safety requirements et al. In the manufacturing stage, it is a stage to check whether the safety requirements are satisfied before the first use after manufacturing the transportation cask. Inspections include welding inspection, leakage inspection, shielding inspection, and thermal inspection. In the operation stage, it is a stage of periodically performing inspections for continuous maintenance of the package when the transportation cask is used. The inspection items to be performed are similar to the manufacturing stage and typically include performance inspection of components and leakage inspection. In this study, domestic and foreign spent nuclear fuel transportation cask regulatory processes were analyzed. It was found that the domestic and foreign spent nuclear fuel transportation cask regulatory processes consist of the design phase, the manufacturing phase, and the operation phase. The results of this study can be used as basic data for policy decision-making for the spent nuclear fuel cask.

This study was aimed to determine the effects of hybrid and inoculant on in vitro rumen digestibility and rumen fermentation indices of corn silage. Two corn hybrids(Kwangpyeongok (KW) vs. Pioneer 1543(PI)) were ensiled for 100 days with two inoculants(L. plantarum(LP) vs. L. buchneri(LB)) applied at 1.2 × 105 cfu/g of fresh forage. Silages were incubated in rumen fluid medium at 39℃ for 72 hours. Both of KW and PI had no difference(p>0.05) on in vitro digestibility of dry matter(IVDMD) and neutral detergent fiber(IVNDFD), while application of LB produced higher(p<0.05) IVDMD and IVNDFD than LP. Hybrid and inoculant applications did not affect(p>0.05) total gas volume, ammonia-N, total VFA, and acetate concentrations in the rumen. Applied LB was higher(p<0.05) propionate concentration than LP, while hybrids had no effect(p>0.05). Furthermore, the interaction effect(p<0.05) was occurred in propionate concentration. Butyrate concentration did not affected(p>0.05) by hybrid and inoculant applications, but there was an interaction effect between hybrid and inoculant(p<0.05). Applications of hybrid and inoculant had effects(p<0.05) on iso-butyrate and valerate, without any interaction effects(p>0.05). This study concluded that application of KW and PI has no effects on in vitro rumen digestibility and rumen fermentation indices of corn silage, while application of LB increase the rumen digestibility in both of corn hybrids.

This study was conducted to examine the effect of new inoculants on in vitro digestibility and fermentation characteristics of high moisture rye silage. Rye was harvested at heading stage and divided into 5 treatments, following: No additives(CON); L. plantarum R48-27(NI1); L. buchneri R4-26(NI2); mixture of NI1 and NI2 at 1:1 ratio(MIX); and L. buchneri(LB). The rye forage was ensiled into 10 L bucket silo for 100 days. In vitro digestibility of dry matter and neutral detergent fiber were highest(p<0.05) in NI2 silage. The pH in NI2 and LB silages were lower(p<0.05) than CON silage. Lactate concentration was highest(p<0.05) in NI1 silage. While concentrations of acetate and propionate were highest(p<0.05) in MIX silage. Lactates : acetate ratio was highest(p<0.05) in NI1 silage, but lowest in LB silage. Butyrate concentrations of NI2 and LB silages were lower(p<0.05) than that in CON and NI1 silages. Lactic acid bacteria (LAB) count in all inoculated silages was higher(p<0.05) than that in CON silage, while yeast count in LB silage was lower than in CON, NI1, and MIX silages. In conclusion, application of NI2 inoculant could improve potentially fermentation quality and digestibility of high moisture rye silage.

The yellow-legged hornet, Vespa velutina nigrithorax (Hymenoptera: Vespidae), invaded into South Korea in 2003. Currently, V. velutina is distributed throughout South Korean regions,. A genetic trait of invasive species provides important data for environmental risk assessment. In this study, we analysed the genetic variation of the V. velutina among the populations of South Korea and other foreign countries using partial sequences of mitochondrial COI, CytB and 16S rRNA. We further developed intergenic spacers (IGS2 and IGS3) to detect genetic variation among Korean populations. Each single haplotype was recovered from the domestic V. velutina from each coding gene sequence. Korean individuals shared the haplotype with that of Japan and China. Phylogenetic analysis (excluding 16S rRNA) using available sequences and ours showed the presence of two groups: the Indonesia and Malaysia group and another group (Korea, Japan, China, France, Vietnam and Thailand). The newly developed IGS2 and IGS3 markers resulted in each seven and four haplotypes, providing better resolution than coding gene sequences. Analysis of Molecular Variance using the combined sequences of IGS2 and IGS3 showed that the majority of variance was allocated to each population and only minority of variance is allocated to among-populations. This result may indicate that the V. v. nigrithorax invaded in Korea shows a single panmictic population and this possibly suggest that Korean population may have originated from small founder individuals.

The dung beetle, Copris tripartitus, has been listed as an endangered insect in Korea. In contrast to typical genomic characteristics, the 15,457-bp long, the complete mitochondrial genome (mitogenome) of C. tripartitus has a few unusual characteristics. The genome has the trnP-trnT arrangement at the ND4L-ND6 junction, which is found only in two species of Scarabaeoidea, including C. tripartitus, in 53 available species. Twelve protein coding genes (PCGs) have typical ATT and ATG start codons, whereas COII had the start codon GTA, which is unprecedented in Scarabaeidae. The 297-bp A + T-rich region, which is the shortest available in Scarabaeidae, harbors three repeat units (26, 29, and 21 bp), each consisting of duplicated identical sequences interspersed in the A + T-rich region. Phylogenetic analyses were performed using the concatenated sequences of the 13 PCGs and two rRNA genes using both the Bayesian inference (BI) and maximum likelihood (ML) methods for the families Scarabaeidae and Lucanidae that are available for their mitogenomes in Scarabaeoidea. Our consensus phylogeny yielded monophylies of each family and the subfamily Scarabaeinae in Scarabaeidae with the high nodal supports (0.99-1 by BI and 79-100 by ML). Among the three tribes, represented by multiple genera in Scarabaeinae each Oniticellini and Onitini was supported as monophyletic groups with the highest nodal supports (1 by BI and 100 by ML), whereas Onthophagini was non-monophyletic group, presenting the tribe relationships: ((((Oniticellini + Onthophagini [Caccobius, Milichus, Onthophagus]) + Onthophagini [Digitonthophagus, Phalops]) + Onitini) + (Phanaeini + Eurysternini) + Coprini).

This study was carried out to estimate the effect of selected inoculants on chemical compositions and fermentation characteristics of rye silage. Rye was harvested at dough stage and divided into 5 treatments, following: No additives (CON); L. plantarum R48-27 (LP27); L. buchneri R4-26 (LB26); Mixture of LP27 and LB26 at 1:1 ratio (MIX); and L. buchneri (LB). The rye forage was ensiled into 10 L bucket silo for 100 days. The contents of NDF and ADF were lowest (P<0.05) in LB26. The pH in LB26, MIX, and LB were lower (P<0.05) than CON and LP27. Lactate content in LB was higher (P<0.05) than the others, while acetate content in LB26 and LB were higher (P<0.05) than that in CON and LP27. Lactate to acetate ratio was highest (P<0.05) in LB, but lowest in LB26. Lactic acid bacteria (LAB) count in LB was higher (P<0.05) than that in CON, while yeast count in CON was lower than in all silages applied inoculants. In conclusion, silages inoculated with LB26 could improve potentially the aerobic stability caused by increases of acetate and propionate concentrations.

동남아시아에 발생하던 등검은말벌은 최근 국내 뿐만 아니라 프랑스와 일본, 유럽 전역으로 확산되어 전 세계 양봉 산업에 극심한 피해를 주고 있다. 등검은말벌을 방제하기 위해 다양한 방제 방법들이 연구되고 있으며, 그 중 말벌 유인제에 대해 국제적으로 많은 연구가 진행되어 왔으나 이 역시 지속적인 개발이 필요한 실정이다. 따라서 본 연구에서는 시판 유인제와 최근 (주)다목에코텍에서 새롭게 개발한 신규 개발 유인제에 대한 효능 검정을 수행하였 고 양봉장에 출현하는 국내 발생 말벌속의 발생양상을 조사하였다. 담양 1개소와 곡성 2개소에 기존 유인제과 신규 유인제를 장착한 포획기를 각 3쌍씩 설치하여 2016년 9월부터 11월말까지 주 1~2회 관찰하였다. 그 결과 국내 발생 말벌속 중 등검은말벌(7,787 개체)이 가장 많이 포획되었고, 다음으로 장수말벌, 말벌, 좀말벌, 꼬마장수말벌, 털보말벌 순으로 포획되었다. 두 유인제의 포획력 검정 결과, 신규 개발 유인제가 통계적으로 유의하게(P < 0.01) 등검은말벌 포획력이 높음을 보였다.

Previous phylogenetic results often showed fluctuating positions of Geometroidea in Macroheterocera, particularly from mitochondrial genome (mitogenome)-based analyses. In this study, we sequenced mitogenomes of four geometrid moths to increase taxon diversity for the inference of phylogenetic positions of Geometroidea in Macroheterocera. The general genomic features found in Macroheterocera also were found in the four geometrid moths. Phylogenetic analyses using 71 representative mitogeneome sequences in Macroheterocera yielded the consensus superfamilial relationships (((((Bombycoidea + Lasiocampoidea) + Geometroidea) + Noctuoidea) + Drepanoidea) + Mimallonoidea), confirming the sister relationship of Geometroidea to (Bombycoidea + Lasiocampoidea) in both Bayesian Inference and Maximum-likelihood method.

Dendrolimus superans (Lepidoptera: Lasiocampidae) has long been acknowledged to present in South Korea under the circumstance of a substantial change in species names of Dendrolimus. In the present study, we found that specimens of D. superans collected from South Korea were D. sibiricus, rather than D. superans. Comparison of Korean specimens to the D. superans from Japan and the D. sibiricus from Russia in terms of wing morphology, female and male genitalia, a partial COI gene sequence, and a partial internal spacer sequence 2 (ITS2) consistently supported the presence of D. sibiricus in South Korea. Phylogenetic analyses using concatenated sequences of COI and ITS2 from available individuals of D. sibiricus and D. superans both by Bayesian inference and maximum likelihood methods the Korea samples to be D. sibiricus.

The purpose of this study was to examine the degree of knowledge of care workers working at long term care hospitals and nursing homes on pressure ulcer. A total of 81 care workers including 34 at long term care hospitals and 47 at nursing homes were surveyed. 24 questions were used to evaluate their degree of knowledge on pressure ulcer. Their knowledge on pressure ulcer scored 12.84 out of the total score of 24 points(SD=3.40), which was equal to 53.50 (SD=24.23) out of 100 points. Their knowledge on the prevention of pressure ulcer was highest among the subareas of evaluation. Their knowledge on pressure ulcer statistically significantly differed according to education on pressure ulcer(P<.05). A pressure ulcer is a skin disorder that may be prevented and cured. At this point when long term care facilities are rapidly increasing, care workers highlevel knowledge on and good management of pressure ulcer is very important. Practically educating them on pressure ulcer including the provision of recent, updated relevant knowledge will be necessary.