본 연구의 목적은 간호대학생의 성격 5요인과 그릿이 학업소진에 미치는 영향요인을 확인하기 위한 서술적 조사연구이다. 대상자는 S시 소재 E대학 간호학과에 재학 중인 간호대학생 285명으로 2023년 4월 11일부터 2023년 6월 13일까지 자가보고형 설문지를 통해 자료를 수집하였다. 수집된 자료는 SPSS/WIN 29.0 프로그램을 이용하여 descriptive statistics, t-test, ANOVA, Pearson’s correlation, multiple regression 분석을 실시하였다. 연구결과, 학업소진은 그릿(r=-.425, p<.001), 친화성 성격 (r=-.330, p<.001)과 음의 상관관계를 보였다. 반면, 신경증 성격과는 양의 상관관계를 보였다(r=.384, p<.001). 간호대학생의 학업소진에 두 가지 성격 요인(신경증, 친화성), 전공만족도, 그릿이 유의한 영향을 미치는 것으로 나타났다. 따라서 간호대학생의 성격 5 요인을 활용하여 학업소진을 예방할 수 있는 상담법 개발과 전공만족도와 그릿을 높이고 학업소진을 감소시킬 수 있는 프로그램 개발이 필요하다.

The purpose of this study is to classify the body types of obese men in their 50–60s and compare them with those of obese middle-aged men in their 30–40s. The 3D anthropometric data of obese men aged 50 to 60 years from the 6th Size Korea. The data are analyzed using SPSS 25.0 for Windows, and descriptive statistics, χ2 test, correlation analysis, and cluster analysis are used to classify obese body types. As a result of the study, five factors are extracted to determine body types, which are classified into three obese body types through cluster analysis. 1) a large physique and consequently large circumference and height; 2) A short upper body length, short height, and thick belly; 3) the lowest rate of obesity and relatively flat abdominal curve. For the 30–40s group, Type1 showed the highest rate at 55.6%, whereas for the 50s group, Type3 showed the highest rate at 49.3%, and for 60s group, Type2 showed the highest rate at 41.2%. The classification accuracy of the discriminant function for each type is 94.7%, indicating relatively high accuracy. Furthemore, the recently changed obese body type are analyzed by comparing it with the 3D anthropometric data of 8th Size Korea, which will contribute to the utilization of basic data for manufacturing apparel for obese men.

Heterogeneous nuclear ribonucleoprotein A2/B1 (hnRNPA2/B1) is an N6-methyladenosine (m6A) RNA modification regulator and a key determinant of premRNA processing, mRNA metabolism and transportation in cells. Currently, m6A reader proteins such as hnRNPA2/B1 and YTHDF2 has functional roles in mice embryo. However, the role of hnRNPA2/B1 in porcine embryogenic development are unclear. Here, we investigated the developmental competence and mRNA expression levels in porcine parthenogenetic embryos after hnRNPA2/B1 knock-down. HhnRNPA2/B1 was localized in the nucleus during subsequent embryonic development since zygote stage. After hnRNPA2/B1 knock-down using double stranded RNA injection, blastocyst formation rate decreased than that in the control group. Moreover, hnRNPA2/B1 knock-down embryos show developmental delay after compaction. In blastocyste stage, total cell number was decreased. Interestingly, gene expression patterns revealed that transcription of Pou5f1, Sox2, TRFP2C, Cdx2 and PARD6B decreased without changing the junction protein, ZO1, OCLN, and CDH1. Thus, hnRNPA2/B1 is necessary for porcine early embryo development by regulating gene expression through epigenetic RNA modification.

We applied column experiments to investigate the environmental fate and transport of silver nanoparticles(AgNPs) in fully saturated conditions of porous media. These column experiments were performed to emphasize oxidation method with H2O2 concentration and acidic conditions. The mobility of AgNPs was decreased with the increasing ionic strength that the surface charge of AgNPs(zeta potential) was neutralized with the presence of positive ions of Na+. Additionally, it was also affected due to that not only more increased aggregated size of AgNPs and surface charge of quartz sand. The decreased breakthrough curves(BTCs) of bisphenol-A(BPA) and 17α-ethynylestradiol(EE2) were removed approximately 35.3 and 40%. This is due to that endocrine disrupting chemicals(EDCs) were removed with the release of OH․ radicals by the fenton-like mechanisms from acidic and fenton-like reagent presenting. This results considered that higher input AgNPs with acidic conditions is proved to realistic in-situ oxidation method. Overall, it should be emphasized that a set of column experiments employed with adjusting pH and H2O2 concentration in proved to be effective method having potential ability of in-situ degradation for removing organic contaminants such as BPA and EE2.

Fumigation activity of Frankliniella occidentalis, western flower thrips, and phytotoxicity were evaluated with phosphine(PH3) and ethyl formate (EF) in the asparagus. Fumigation activity of PH3 and EF showed in the order of egg (64.7 mg·h/Land 132.9 mg·h/L), nymph (5.5 mg·h/L and 14.8 mg·h/L), and adult (3.8 mg·h/L and 14.7 mg·h/L) respectively at 5˚C in12 L desiccator. The adsorption of PH3 was 24% at 5˚C. However, the adsorption of EF increased sharply to 98% at 5˚C.PH3 showed 100% control for all development stage of F. occidentalis with 4g/m3 in 0.65m3 at 2˚C for 48h exposure. Thephytotoxicity was not found. The results revealed that the EF is highly absorbable in asparagus, so it is not suitable as afumigant, but PH3 is considered to be suitable as an alternative MB fumigant for control of the F. occidentalis in asparagus.

오리엔탈과실파리(Bactrocera dorsalis)는 주요 검역 대상으로 지정된 해충이다. 이 해충에 대한 고감도 모니터링과 진단 기술이 초기 방역 처리에 요구된다. 본 연구는 오리엔탈과실파리를 유인하여 치사시킬 목적으로 메틸유제놀과 생물농약을 혼합한 왁스형 방출기를 제작하였다. 본 연구는 또한 5종의 주요 검역 과실파리(오리엔탈과실파리, 오이과실파리, 퀸즐랜드과실파리, 말레이시아과실파리, 지중해과실파리)에 대한 PCR 진단프라이머를 개발하였다. 이상의 모니터링용 왁스방출기과 분자진단기술을 말레이시아 코타키나발루 지역에서 실증 시험하였다.

The investigation of effects on fouling propensity with various viscosity of feed solutions would be better understanding for forward osmosis (FO) performance since the fouling propensity was directly influenced with solution viscosity. Therefore, this study was focused on the FO fouling with model foultants (humic acid, alginate) by altering solution viscosity with change of ionic strength (I.S) and Ca2+ concentrations. In the comparison between humic acid and alginate, as expected, the alginate generally caused more severe fouling (almost 35.8 % of flux reduction) based on the solution characteristics (high viscosity) and fouling patterns (coil and gel layer). However, interesting point to note is that the fouling propensity of alginate was more severe even though it was applied with low viscosity of feed conditions (I.S = 20 mM, Ca2+ = 1 mM). This might be due to that crossed linked gel layer of alginate on the FO membrane surface could be best formed in the condition of Ca2+ presence and higher I.S, and that is more dominant to fouling propensity than the low viscosity of feed solutions.

In this study, an operational data set was analysed by establishing a path model to figure out the actual cause-effect relationship of a wastewater treatment plant (WWTP); in particular, for the effluent concentrations of T-N and T-P. To develop the path models, data sets of operational records including effluent concentrations and operational factors were obtained from a field scale WWTP of 680,000 m3 of treatment capacity. The models showed that the relationship networks with the correlation coefficients between variables for objective expressions indicated the strength of each relationship. The suggested path models were verified according to whether the analyzation results matched known theories well, but sophisticated minute theoric relationships could not be cropped out distinctly. This indicates that only a few paths with strong theoric casual relationships were represented as measured data due to the high non-linearity of the mechanism of the removal process in a biological wastewater treatment.

In this research, the target process was a modified type of a conventional aeration tank with four different influent feeding points and alternated aeration to obtain nitrogen removal. For more accurate switching of influent feeding, the process was operated under a designed control strategy based on monitoring of NH4-N and NOX-N concentrations in the tank. However, the strategy did have some limitations. For example, it was not sensitive to detecting the end of each reaction when losing the balance between nitrification and denitrification of each opposite part of biological tank. To overcome the limitations of the existing control strategy, a diagnosis-based control strategy was suggested in this research using the diagnosis results classified as normal (N), ammonia accumulation (AA) and nitrate accumulation (NA). Using the pre-designed rules for control actions, the aeration and volume of the aerated part of the reactor could be increased or decreased at a fixed mode time. In simulations of the suggested diagnosis-based control strategy, the NH4-N and NOX-N removal rates in the reactor were maintained at higher levels than those of the existing control strategy.

캐릭터 디자인에 있어 '패션'은 캐릭터의 정체성과 성격, 개성과 설정을 한눈에 뚜렷하게 제시해주는 강력한 도구이다. ‘특정한 시기에 유행하는 복식이나 두발의 일정한 형식’으로 정의되는 패션은 의상뿐만 아니라 다양한 장신구, 헤어를 포함한 메이크업 등을 아우르는 하나의 '이미지'를 창조해낸다. 현재의 트렌드를 선도하고 반영하는 실제 런웨이 위의 패션 디자인과 게임 업계 내의 캐릭터 디자인은 서로 영향을 주고 받을 수 밖에 없다. 하지만 이러한 패션의 중요성에 비해 캐릭터 디자인에서 패션 디자인에 대한 분석적인 접근과 접목은 잘 이루어지지 않고 있다. 본 논문에서는 게임 캐릭터 디자인과 패션 디자인 사이의 상호 영향에 대한 고찰을 하고, 패션 디자인에 대한 이론적 분석과 조형적 고찰의 접목이 보다 응용된 시각적 시도의 캐릭터 컨셉 디자인에 도움이 된다는 것을 제시하고자 한다.

The biological wastewater treatment plant, which uses microbial community to remove organic matter and nutrients in wastewater, is known as its nonlinear behavior and uncertainty to operate. Therefore, operation of the biological wastewater treatment process much depends on observation and knowledge of operators. The manual inspection of human operators is essential to manage the process properly, however, it is impossible to detect a fault promptly so that the process can be exposed to improper condition not securing safe effluent quality. Among various process faults, equipment malfunction is critical to maintain normal operational state. To detect equipment faults automatically, the dynamic time warping was tested using on-line oxidation-reduction potential (ORP) and dissolved oxygen (DO) profiles in a sequencing batch reactor (SBR), which is a type of wastewater treatment process. After one cycle profiles of ORP and DO were measured and stored, they were warped to the template profiles which were prepared already and the distance result, accumulated distance (D) values were calculated. If the D values were increased significantly, some kinds of faults could be detected and an alarm could be sent to the operator. By this way, it seems to be possible to make an early detecting of process faults.