This study was conducted to evaluate the efficacy of mulberry leaf mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry leaves to oak fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 5%, 10% and 20% of mulberry leaves, the cumulative proportion of larvae over 2.5g was 93.1% at 65 days, 95.6% at 55 days, and 93.9% at 55 days after rearing at 25±1℃, respectively. Also, heavy metals were not detected in larvae of P. brevitarsis fed on mulberry leaves.

This study was conducted to evaluate the efficacy of mulberry cake mixed diet on larval growth of Protaetia brevitarsis. As a result of adding mulberry cake to oak fermented sawdust and mulberry fermented sawdust, the survival rate of P. brevitarsis larvae were higher than those of the control when mass rearing larvae. When fed oak fermented sawdust with 3, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 92.9% at 65 days, 90.8% at 55 days, and 96.3% at 45 days after rearing at 25±1℃, respectively. When fed mulberry fermented sawdust with 3%, 5% and 10% of mulberry cake, the cumulative proportion of larvae over 2.5g was 86.2% at 85 days, 90.7% at 75 days, and 91.5% at 75 days after rearing at 25±1℃, respectively.

In order to develop the D. adamsi breeding technique that is highly likely to be used as an emotional pet insect, the results of the D. adamsi was collected in the large exhibition Jang Tae-san in Daejeon to the indoor breeding began to spawn after 10 days after the training, the egg laying period was 33.6 days, the average number of spawn per female was 27.7, and the period was 11.8 days. D. adamsi larvae bred with food of oak-boiled molted two times, the duration of 1st larvae development was 11.8 days, 2nd larvae 14.5 days, and the third larvae was 29.4, and the larvae were used to build houses using Masato(soil) and in the pupae, and then in April of the following year. D. adamsi has a characteristic to build a house with fallen leaves and spawn one or two eggs in the fallen leaves, and the results of the spawn mat test using fallen leaves, leaf mold and a sawdust, etc., and the number of spawn was high in the Masato was spread about 3 ~ 5cm, and a fallen leaves on a 10 cm or so, and the growth and survival rate of the larvae were also high. Larvae breeding density was 2 ~ 3 ℓ in the container size to raise the object was normal growth, the higher the density mortality was high and the growth was sluggish. Larvae feeding conditions were normally developed in dry fallen leaves and fermented fallen leaves, compared to the sterile fallen leaves, oak sawdust, sterile fallen leaves and oak sawdust was abnormal, the mortality rate was higher than 50%.

This investigates the microstructure and mechanical properties of Al hybrid material prepared by electromagnetic duo-casting to determine the effect of heat treatment. The hybrid material is composed of an Al-Mg-Si alloy, pure Al and the interface between the Al-Mg-Si alloy and pure Al. It is heat-treated at 373, 573 and 773K for 1h and T6 treated (solution treatment at 773K for 1h and aging at 433K for 5h). As the temperature increases, the grain size of the Al-Mg-Si alloy in the hybrid material increases. The grain size of the T6 treated Al-Mg-Si alloy is similar to that of one heat-treated at 773K for 1h. The interface region where the micro-hardness becomes large from the pure Al to the Al-Mg-Si alloy widens with an increasing heat temperature. The hybrid material with a macro-interface parallel to the tensile direction experiences increased tensile strength, 0.2% proof stress and the decreased elongation after T6 heat treatment. On the other hand, in the vertical direction to the tensile direction, there is no great difference with heat treatment. The bending strength of the hybrid material with a long macro-interface to the bending direction is higher than that with a short macro-interface, which is improved by heat treatment. The hybrid material with a long macro-interface to the bending direction is fractured by cracking through the eutectic structure in the Al-Mg-Si alloy. However, in the hybrid material with a short macro-interface, the bending deformation is observed only in the limited pure Al.

강원도농업기술원에서는 2003년 무름병에 비교적 강하고 화색과 화형이 우수하고 장미 분홍색을 가진 Zantedeschia rehmanni × hybrid ‘Super Gem’과 연한 노랑색 품종 Z. × hybrid ‘Black Magic’을 각각 모본과 부본으로 하여 인공 교배 하였다. 2006년에 개화특성을 검정하여 화색과 화형이 좋은 ‘GZ0616’를 선발하였으며, 2007년에 포장 재배하여 자구 증식률, 초장과 초세 등 1차 특성검정 후 2차 선발하였다. 2013부터 2015년까지 특성검정과 재배시험을 통하여 균일성과 안정성이 인정되어 ‘강교C4-6호’로 최종 선발되었으며, 2017년 2월에 ‘립스마일(Lip Smile)’로 품종등록 되었다. 화포 외부의 주 색은 연노랑바탕 적자색(Y2C+RP79C)이며, 화포 높이는 8.5cm, 폭은 6.2cm로 대형화이다. 개화소요일수는 64.3일, 초장은 66.0cm, 괴경은 80.0g이다. 기호도 평가에서도 ‘Captain Rosette’와 유사하였으며, 절화용으로 이용 가능하다.

To be better fit for highways, pavement systems are required to provide comfortable and safe driving and be structurally durable. Composite pavements can be an effective option as they are more durable by placing a high functional asphalt overlay on a rigid concrete base layer. In order to apply a composite pavement system to the field, it is necessary not only to develop technologies that prevent reflecting crack and deterioration of the base layer, but also to improve bonding performance of materials and ensure structural performance as a pavement system against traffic loading. In advanced countries like Japan, USA and Europe, high-functional composite pavement systems are being put into practice across new highway networks. In this study, we evaluated structural performance (rutting, reflecting crack, and deflection) by applying traffic loads of actual highways through an accelerated pavement tester (APT) of a composite pavement section made up of a quiet porous surface laid over a water-proofing layer, a continuously reinforced concrete base, and a lean concrete sub-base layer, which was developed with new pavement methods used for each layer prior to field application. The APT specimen was constructed with paving materials and equipment actually used on site in the same dimensions (W3.5m*L14m*H2m) as actual highway sections in Korea, and 3-axle double-wheel heavy load (45ton) cart type KALES(Korean Accelerated Loading and Environmental Simulator) traveling on the specimen in both directions was used to simulate traffic loading. After applying around 8,574,000 ESALs of traffic loads, no reflecting crack occurred on the asphalt surface of the composite pavement, without surface distress except for rutting. In order to examine what causes rutting of pavements, we surveyed thickness of pavements by layer and measured asphalt density.

In Korea, concrete pavements were first applied to highways in 1981 and as a result of continued increase in length over the past years, 2,592 km of concrete pavement network is currently in service, of which 1,399 km(54%) of concrete pavements is 10 years or older, and 233km(9%) is 20 years or older. The length of concrete pavement sections nationwide has been steadily on the rise every year (EXTRI, 2017). Approximately 54% of current concrete pavement highway network will reach the service life limit in 2025 which means around 660 billion won is needed for future pavement repair project (EXTRI, 2017). Given that concrete pavements beyond design life still have a remaining service life, it is economically advantageous to repair them before reconstruction. Asphalt overlays are a major repair method for older concrete pavements. Depending on the concrete pavement condition, thickness and mixture of asphalt overlays are determined. Service life of asphalt overlays varies by the presence, time and size of cracks in existing concrete pavements and reflecting crack at joints. Temperature change of concrete pavement is among the major reaction parameters of reflecting crack. Reflecting crack develops when asphalt bottom-up cracking by longitudinal shrinkage and expansion due to temperature change of the concrete base layer, top-down cracking by temperature difference between top and bottom of concrete, and shear stress by traffic loading are combined (Baek, 2010). Crack and joint behaviors of concrete pavement vary between the base layer and the concrete surface of composite pavement system, and different conductivity by mixture and thickness of asphalt overlay leads to temperature change of concrete base course. This study measured temperatures of each layer of diverse composite pavements in place on site and analyzed differences in temperature change of concrete base layer depending on mixture and thickness of asphalt overlays. Overlay thickness parameters were 5cm and 10cm, two values most widely used, while mixture parameters were SMA and porous asphalt. Based on temperature change of concrete surface, this study also evaluated the difference of temperature change in concrete base layer with an asphalt overlay on top. Findings from this study are expected to be utilized for studies on mechanism and modeling of reflecting crack in old concrete pavements with asphalt overlays.

The aim of the study was to investigate the effects of incentive spirometry and Ujjayi breathing technique on the pulmonary function of smokers. Subjects were individuals who had a smoking habit of at least a year. Subjects were randomly divided into 3 groups: the incentive spirometry group (n=8), Ujjayi breathing technique (n=9), and a group applying both incentive spirometry as well as Ujjayi breathing technique (n=8). Each intervention was performed twice a day, 5 times a week, for a total of 8 weeks whereupon the change in pulmonary function was evaluated. A spirometer was used to measure FVC, FEV1, and FEV1/FVC. The survey used for this study included the Fagerström Test of Nicotine Dependence (FTND) and the Shortness of Breath Questionnaire (SOBQ). Study results for the comparison within groups showed that in the group that performed both the incentive spirometry and Ujjayi breathing technique, FEV1 improved with statistical significance (p<.05). Furthermore, within this comparison the FEV1/FVC improved with statistical significance. Comparison amongst the groups showed no statistically significant differences in all areas. Following, to effectively increase pulmonary function in young adult smokers, both incentive spirometry and Ujjayi breathing technique should be employed together.

The purpose of this study is to improve practical skill evaluation method of mushroom - trained certified technician's practical skill evaluation which is one of national qualification tests based on national incompetency standards. One of the current National Competency Standards (NCS), mushroom - trained certified technician uses NCS based practical assessment method. In order to improve the current practical evaluation method, we try to improve practical evaluation method based on field customized problem solving ability and improve the practical evaluation method, various evaluation methods should be constructed. On the purpose of identify the diversity and problems of the evaluation method, the experts of the group consultation, the mushroom-related research institute and the related industry collaborated to identify the problems of the actual mushroom - trained certified technician practicum test, This study on the evaluation improvement method was carried out. In this study, the contents of practical test of the current mushroom traits were analyzed and the trends of the latest mushroom industry were widely reflected.

This study is investigated the growth characteristics(number of available stipe, pileus diameter, pileus thickness, stipe length, stipe thickness, object weight, comparison yield ability of 1 cycle) and storage characteristics of ‘Sanjo 701’ (S7) cultivars according to relative humidity. The S7 growth characteristics were investigated by quantifying the growth and the characteristics according to the relative humidity, The storage stability was investigated every 5 days and freshness was measured by ‘Minamide Method’. S7 pileus diameter is The higher the relative humidity was confirmed becomes larger and the more increased relative humidity also increase the comparison yield ability of 1 cycle. However, pileus diameter or stipe length This could not see the big difference in the three treatment groups, the plieus thickness was no significant difference in the treatment of 80% and 95%. The fresh weight of S7 decreased significantly at 80% and 95% relative humidity after 10 days of storage, but decreased continuity in 65% humiditiry. The elongation percentage of S7 pileus was observe in 95% relative humidity, values of L, a and b (SCI), showed the highest L value in 65% and the a value in 95%. b values were similar in 65%, 80% and 95% treatments. On the ‘Minamide Method’ measure freshness was changed from the 10th day of storage at relative humidity of 95%, but humidity of 65% and 80% treatments, it changed after 15 days of storage. In this study growth characteristics and yield were increased at higher relative humidity, but storage stability was decreased. Therefore, it is deemed necessary to change the relative humidity to produce high quality mushrooms.