Entomopathogenic fungi are used to produce raw materials by applying solid culture technology using grains. But there are various problems such as low production efficiency and cross-contamination. Solvum Co., Ltd. conducted research on liquid culture technology to develop a method that can overcome these shortcomings of solid culture technology. We conducted research and development on using Beauveria bassiana 331R to observe the culture according to the seed inoculation amount in a 30 L fermenter, it was carried out at 1.0 % (v/v) and 10.0 % (v/v). Although there was a difference of 1 day, 1.0 %(v/v) seed inoculation was observed to be more than twice that, and active blastospores and yield were observed at over 95.0 %. As a results, it was determined that cost and efficient production would be possible during the culture process in mass production. Based on these experiments, a 300 L fermenter was cultured with 1.0 % (v/v) seed inoculation, resulting in a yield of 1.24E+09 CFU/mL on the 6th day of cultivation. As a result of freeze-drying using the final culture medium, it was confirmed that the production yield was improved by 113.0 % compared to the control.

Mucosa-associated lymphoid tissue (MALT) lymphoma (ML) is a type of non-Hodgkin’s lymphoma involving MALT, commonly the stomach or salivary glands, although virtually any mucosal site can be affected. ML originates from B cells in the marginal zone of MALT, and is also called extranodal marginal zone B cell lymphoma. It is a slow-growing cancer that usually responds well to treatment. A 59-year-old female presented with a 1-day history of quadriparesis and dysarthria. Up arrival at the hospital, motor power in the right upper and lower extremities was grade 3/5 according to the Medical Research Council scale, while that in the left leg was 4/5. The patient had been diagnosed with gastric ML 1 year prior, and had received antibiotics during the previous 2 weeks. The emergency magnetic resonance imaging of the brain performed at the time of presentation showed multifocal embolic infarction in the cerebral hemisphere bilaterally, which did not have a cardiac origin. Magnetic resonance angiography revealed no stenotic or occlusive lesions. Secondary prophylaxis with daily administration of 300 mg aspirin was prescribed. The patient was discharged with residual right hemiparesis 2 weeks after the onset of symptoms. Herein, we present a rare case of multifocal cerebral infarction in a gastric ML patient.

Sustainability issue has received growing attention from various stakeholders. To engage more people to participate in sustainable actions, the United Nations has promoted #actnow campaign since 2019. Among various sustainability initiatives and approaches, the UN’s #actnow campaign focuses on food and fashion sustainability since these two industries encompass various sustainability issues from production and post-consumption. By analyzing Twitter's big data, the study findings demonstrate that negative sentiment messages are powerful in driving the public’s engagement in social media message dissemination. The findings suggest that practitioners may use assertive and strong voice messages to lead consumers’ participation in sustainable message dissemination.

The major concern in the deep geological disposal of spent nuclear fuels include sulfide-induced corrosion and stress corrosion cracking of copper canisters. Sulfur diffusion into copper canisters may induce copper embrittlement by causing Cu2S particle formation along grain boundaries; these sulfide particles can act as crack initiation sites and eventually cause embrittlement. To prevent the formation of Cu2S along grain boundaries and sulfur-induced copper embrittlement, copper alloys are designed in this study. Alloying elements that can act as chemical anchors to suppress sulfur diffusion and the formation of Cu2S along grain boundaries are investigated based on the understanding of the microscopic mechanism of sulfur diffusion and Cu2S precipitation along grain boundaries. Copper alloy ingots are experimentally manufactured to validate the alloying elements. Microstructural analysis using scanning electron microscopy with energy dispersive spectroscopy demonstrates that Cu2S particles are not formed at grain boundaries but randomly distributed within grains in all the vacuum arc-melted Cu alloys (Cu-Si, Cu-Ag, and Cu-Zr). Further studies will be conducted to evaluate the mechanical and corrosion properties of the developed Cu alloys.

Purpose: To develop a tool for measuring peripheral intravenous catheter insertion performance. Methods: This was a cross-sectional descriptive study. Initial items were generated using existing guidelines and tools, and 19 experts assessed content validity. Data were collected from a tertiary hospital in D city from January 17, 2018, to October 20, 2019. The data of 365 nurses were used for principal component analysis with orthogonal rotation. Concurrent validity was confirmed using Pearson’s correlation between the developed tool and the nursing career period. Reliability was confirmed after evaluating internal consistency. Results: Initially, 16 items were generated, but three items were deleted in content validation. A two-factor solution was preferred in exploratory factor analysis and explained 48.2% of the variance. The two factors were named “point of care” and “follow-up care,” respectively. The tool’s reliability is .87. Conclusion: The developed tool was valid and reliable. It is composed of 13 items and can be used quickly and easily. Therefore, it can be utilized for the education and training of novice nurses and the self-reflection of experienced nurses. In addition, it will be useful to review the catheterization process in common clinical settings.

A sequential column experiment was conducted for uranium removal of excessively high or highly U-contaminated soils, simultaneously. Two pilot-scale acryl columns with a 24 cm ID and 48 cm length were uniformly packed with each U-contaminated soil (both < 2 mm, 119, and 22.4 Bq/g as initial U-238 activities). A column packed with soil contained very high U constant located first then sequentially located second columns with relatively lower U-contaminated soil. Thus the effluents which passed very high U-contaminated soil and having extremely high dissolved U concentration was directly inflowed the second columns. Both columns initially and respectively flushed with demi water (or condensing water of air conditioner generated from radiation controlled area) to saturate and displace the air from the pore space. Elution was carried out with alkaline and acidic solutions, respectively, and sequentially. The uranium removal efficiencies were found and a comparison was made with the pilot soil flushing experiments. During this study, a new approach to reducing acidic flushing waste which is considered the biggest defect of soil washing/flushing was established, and optimal factors were calculated to demonstrate industrial-scale uranium decontamination of soil with high uranium content.

High-intensity focused ultrasonic (HIFU) decontamination technology to decontaminate complex metal radioactive waste was developed and verified. Ultrasonic decontamination technology is a method widely used in this field, but its energy strength is weak, so it cannot be applied to fixed contamination. The HIFU developed in this study can eliminate a wide range of fixed contamination due to the advantage of maintaining a high frequency while having hundreds of times the energy intensity compared to conventional general ultrasonic method. In addition, there is a merit in that there is no work that generates a lot of secondary wastes such as chemical decontamination method or threatens the safety of workers. In particular, high ultrasonic energy is transmitted to curved parts and inside pipes that cannot be decontaminated with blasting method, so various types of metal wastes can be treated with the HIFU method. In this study, the performance of the HIFU was verified for zirconium chips, and the radioactivity after decontamination was reduced to less than MDA in all subjects.

This study empirically verified the effect of the characteristics of live commerce on consumer trust and purchase intention. An online survey was conducted targeting adult women in their 20s and 30s who watched videos relating to fashion products on the NAVER shopping live channel; 281 questionnaires were analyzed using the IBM SPSS statistics 23 and AMOS 21 software packages. Consequently, the four factors of interactivity, attractiveness, price discount, and playfulness were identified from the data as characteristics of live commerce. Whereas interactivity and playfulness positively affected trust in both the seller and the product, attractiveness did nor significantly affect trust in the seller and the product. Furthermore, price discount had a significant positive effect only on trust in the seller and had no significant effect on trust in the product. In addition, trust in both the seller and the product had a significant positive effect on consumers’ purchase intention; in particular, trust in the seller had a greater influence on consumers’ purchase intention than trust in the product did. Research on the characteristics of live commerce can contribute to extend the theorical framework of live commerce research. Finally, fashion companies using live commerce channels will be able to develop live commerce channels that can elicit positive consumer perceptions based on the results of this study.