To evaluate parameters influencing on the dust removal of the High Temperature Filter(HTF) system, a computer simulation of fluid dynamics inside the system had been performed. The results showed that the optimum pulse jet periods were 50ms and 90ms for the 1000mm and 1500mm long filter elements respectively. Dust removal effect was very excellent under the pulse jet pressure of 3 bar. But the distance between the pulse jet nozzle and the venturi of a filter element had no meaningful effect on the performance with the variation from 5mm to 10mm. Compared to the dispersion mode of pulse jet, the collective mode of pulse jet flow was preferable in maintaining the pressure inside the system stable.

파일럿 규모의 유리화플랜트에서 일련의 시험을 통해 고온 세라믹 캔들 필터 시스템의 주요 운전 변수 및 성능을 평가하였다. 실증 시험결과 매 시험초기에는 필터 표면 먼지층(Dust cake)의 생성으로 인해 필터 매질에 걸리는 차압이 급격히 상승하였다. 그런 다음 차압은 곧 일정한 범위에서 안정되었고, 표면유속(Face velocity)에 비례하여 계속적으로 변화하였다. 이와 반대로, 필터 투과율(Permeability)은 매시험 초기에 급격히 감소하였다. 필터표면 먼지의 역세정은 공기압 3～5 bar범위 일때 효율적이었다. 필터 입구 및 출구에서 동시에 등속으로 채취한 먼지농도를 바탕으로 필터의 먼지 포집율(Dust collection efficiency)을 평가한 결과 필터 성능은 설계값인 99.9%과 같은 것으로 나타났다. 100시간의 장기시험을 포함한 일련의 실증시험을 수행하는 동안 고온 필터 시스템의 성능에 영향을 주는 특별한 문제점은 발견되지 않았다.

The application concept of using a fail safety filter on the filtering system is to prevent the particle leakage when the main filter element is broken at high temperature. In this study, the metal filters were fabricated by pressureless sintering method. The mixture of stainless steel powders and filler metal binder solved in the water solutions of 5% PVA was compacted to form the cylindrical filter without pressure. The compacted filter were sintered in the vacuum sintering furnace at 120 for 1 hour. The metal filter(produced with powder of 640-840 size) having more than above 50% porosity, 500 pore size, and permeability of 7.310m plugged within 2.5 minute to prevent the leakage of maximum slip particle size of less than 3.

본 논문은 축소 3층 건물의 최상층에 능동질량형 제어장치를 설치한 시스템에 관한 식별실향분석이다. OKID기법을 적용하여 진동대 및 제어장치의 가진 입력과 건물 및 제어장치의 응답인 출력관계를 분석하여 수학모델을 구하였다. 제어장치가 설치된 건물에 관한 입력은 진동대에 의한 지반가속도와 제어장치 모터의 구동신호이다 그리고 출력은 건물 각층과 제어장치의 가속도이다. 입출력 관계로 구하여진 수학모델을 바탕으로 제어장치의 최적설계를 수행하였으며 수치해석과 실험결과를 비교한바 서로 일치함을 확인할 수 있었다.

Decomposition of ozone at room temperature was investigated by comparing between commercial monolithic ozone decomposition catalyst (ODC, MnO2) filter and monolithic photocatalyst (TiO2) filter. The effects of residence time, UV (ultraviolet, A type) irradiation, and upstream ozone concentration on the ozone conversion were discussed. UV ray was irradiated using four BLB (black light blue) lamps (λ: 310∼ 400nm) of constant intensity. The upstream concentration of ozone was controlled by an electrostatic ozone generator. For ODC performance, the presence of UV irradiation slightly affected initial ozone conversion compared with no UV irradiation condition. However, for photocatalyst, the ozone was highly decomposed in the presence of UV irradiation. Long time performances of the both catalysts were evaluated by a real-time ozone monitoring system during 120 hours. The results show that the UV irradiation enhanced the ozone conversion for the both catalysts.

본 논문에서는 비선형 파라메트릭 사영필터를 이용한 2차원 트러스 구조물의 손상 검출에 대한 연구를 제시한다. 역문제의 해석은 최근 많은 관심을 끌고 있으며, 역문제 해석법으로서 필터이론을 사용한 접근법이 많은 관심을 받고 있다. 특히 칼만 필터는 신호 통신, 시스템 제어 등의 많은 분야에서 적용되어 왔으며 그 유효성이 입증되었다. 본 논문에서는 비선형 파라메트릭 사영필터를 2차원 트러스 구조물의 손상추정에 적용하고 손상된 구조물의 고유 진동수과 고유 모드를 관측 데이터로 채택하여 손상부재의 위치와 손상정도를 추정한다. 마지막으로 수치해석 예를 통하여 제안된 해석법의 유효성을 밝힌다.

The purpose of this work is to develop a new type of particle collection filter using electrical discharge technology. The new filter must be high efficiency and applicable to air conditioner to use for household, so we suggested the new type filter. The new type filter has a distinctive feature except characteristic of ESP, a thickness of collecting electrodes is thicker than that of existing type ESP. When particles come into the filter, the particles will collide with side surfaces of the collecting electrodes. At the same time of particle collision with side surface, the particles are charged by the collision and collected by electrical force. Therefore, we called this type "Ion Impactor". We optimized condition of thickness of collecting electrodes and applied voltage using six sigma method because thickness of collecting electrodes and applied voltage are very important to improve the collection efficiency. We analyzed distribution of electric field line, the electric field lines were uniformly distributed on the side surface of the collecting electrodes. From this analysis, we can see the improvement of the particle collection efficiency. We made the ion impactor type filter on a large scale to equip to the air conditioner, and measured the particle collection efficiency. For the 0.1∼0.2㎛ range particle, the collection efficiency was higher than that of existing type ESP by 30%. The collection efficiency of the 0.3∼0.4㎛ range particle was higher by 12%.

The contamination problem is getting worse now a day because of the industrial activities. Recently it has been announced that there's environmental hormone in river and lake which produces clean water, also there's too many of algae reproduces under the water and some virus in the drinking water. The quality of water is very important. pure and clean water is not only a precondition for human being to live but a basic factor to improve the quality of life. so a water purification system must be developed. This study is about the surface washing treatment technique. We tried to use a rotary nozzle to get a tush degree of efficiency, for it was not enough with present way of washing. The nozzle is run by water pressure. The results of the experiment are as follows. We got a clean and equal surface after washing. After washing, the water's maximum consistency was 330NTU and it shows that this way is better than before one with 215NTU. Clean level of the filter was 6˚and it's 2.8 times higher than 17˚with the old way. We can see the results that the new way of washing is more effective than old way based on this study.

In this paper, a study of 2-step damage detection for space truss structures using the extended Kalman filter theory is presented. Space truss structures are composed of many members, so it is difficult to find damaged member from the whole system. Therefore, 2-step damage identification method is applied to detect the damaged members. First, kinetic energy change ratio is used to find damage region including damaged member and then detect damaged member using extended Kalman filtering algorithm in damage region. The effectiveness of proposed method is verified through the numerical examples.