The thin cylindrical shell structure under compression should be checked with buckling stability. In DNV, there is a spacing criteria of stiffener which based on linear theory without initial imperfection. In this study, structural analysis, using geometry nonlinear analysis, of stiffened cylindrical buckling strength with various initial imperfection were performed and compared with DNV and FEM results.

The four buckling resistance steel dampers were tested under cyclic lateral load to investigate the relationship of lateral load and displacement. The main variables are the existence of cover plate for preventing from buckling of out-of-plane and thickness of sim plate with 3.2 mm, 4.5 mm and 7.0 mm. The test showed that steel damper with cover plate had the wider area of its hysteresis loop than that of without.

In this study, judging criteria of buckling modes and theoretical functions of several researchers are compared with experimental studies to obtain valid buckling values of corrugated steel plates. The results shows that the judging criterion of Moon J. (2003) is the most reasonable criterion among those of several researchers. The theoretical function of Moon, J. (2008) in the local and the global buckling mode and that of Cafolla, J. (1997) and that of Hyun, K. (2003) in the interactive buckling mode provide proper buckling values of corrugated steel plates.

Steel box girder has not only an excellent constructability but is also a lightweight structure. Compression flanges of steel box girder under negative moment need stiffeners to increase buckling strength, thereby increasing the construction cost. In this study, compression flanges using trapezoidally bended plates were investigated to replace existing flat flanges.

Elasto-plastic buckling strength is evaluated based on the procedure given by DNV-RP-C208. To calculate the safety margin of an irregular-shaped steel plates, usage factor in DNV-RP-C201 is modified then used.

종래 브레이스시스템은 횡력저항 및 층변위제어에 효율적이며 골조물량 감소에 따른 경제성이 향상되어 일반적인 강구조 횡력저 항시스템으로 적용되고 있다. 그러나 압축측에서 항복응력에 도달하기 전 가새의 좌굴이 발생하여 충분한 내력을 발휘하지 못하고, 내력열화 형의 이력거동으로 불안정상태가 된다. 좌굴에 의한 내력저하 개선시스템으로 중심재를 구속하여 좌굴방지가 가능한 비좌굴가새는 심재의 항 복 이후에도 안정적인 이력특성을 나타내어 종래 브레이스에 비하여 에너지흡수능력이 우수하다. 최근 10년간 미국, 일본 및 대만에서 매우 다 양한 형상의 비좌굴가새가 제안되었으나, 기존의 실험연구에서는 그 형상이 매우 제한적인 경향을 보이고 있다. 본 연구에서는 조립형 Precast RC 보강재를 가지는 비좌굴가새를 제작하고 이력특성을 평가하기 위한 부재실험을 수행하였다. 또한 실험결과를 AISC(2005)의 요구조항과 비교하였다.

TLP (Tension Leg Platform) is the marine structure for the buckling evaluated to ensure the safety. ABAQUS program was conducted the buckling of TLP. A global model which simulated entire TLP structure has too many elements. This leads a large consumption of time and the hardware for analysis. Therefore, dividing the global model into the detailed models and the local models are significant. In this study, the buckling strength evaluation of the TLP structure members was proceed via non linear finite element analysis presented in DNV-RP-C208.

In this paper, the buckling analysis was performed to compare the buckling mode and the buckling load for siffened plates having ㄷ, Reverse T, corrugated wave, ㄹ, honeycomb and ㅁ types of ribs. In the case of the rib space S=300mm, various types of buckling modes were appeared according to the rib types. In the case of the rib space S=450 and 600mm, the buckling loads of ㄹ, ㅁ and honeycomb were bigger than that of ㄷ and ㅁ type was the biggest.

In this study, trapezoidal corrugate plate were subjected to cyclic loading under displacement control. And then, results from the experiment, the behavioral characteristics and mechanism of energy dissipation were investigated. This result were different to the cumulative size of energy dissipation capacity in load-displacement curve. Based on these results, Influence of the shape is very large and it is determined the define an appropriate shape for the size.

TLP is an offshore structure which should be tested for the buckling strength for safety. In this paper, DNV-RP-C208 are used to analyze a stress resultant of buckling phenomenon for complicated structures by using nonlinear finite element methods.

In this study, the shear buckling strengths of the trapezoidal and sinusoidal corrugated plates with the same self-load were compared, and their characteristics and tendencies were analyzed. In the preceding comparative study of corrugation shapes, the corrugation wave depth and the corrugation wave angle were the same. As these target, A linear buckling analysis was conducted, and the differences in the shear buckling mode and the buckling stress were analyzed.

본 연구는 정현형 주름과 마름모형 주름 형상의 전단좌굴 특성을 비교, 분석하는 것이 목적이다. 이를 위해서 동일한 길이의 마름모꼴주름과 정현파주름을 해석대상모델로 채택하였으며, 선형좌굴해석을 통한 전단좌굴특성과 이론식에 의한 특성을 분석하였다. 일반적으로 주름강판의 전단좌굴 형태는 국부좌굴, 전체좌굴 및 두 좌굴에 의한 연성좌굴로 분류된다. 그러나 마름모꼴주름과는 달리 정현파주름형상은 평평한 면이 없기 때문에 전단좌굴의 양상에 대한 경향이 달라진다. 특히 국부좌굴과 전체좌굴의 경계에서 나타나는 전단응력변화와 양상은 주름형태에 의해 차이가 난다. 분석 결과에서 볼 때, 제형 (마름모꼴)의 경우는 이론식내의 전체좌굴과 국부좌굴의 경계에서 연성좌굴모드가 발생했다. 그러나 정현파형의 경우 전체좌굴이 발생하는 구간에서 연성좌굴모드가 발생하는 양상을 보였다. 또한 국부좌굴 구간에는 제형형상이 그리고 전체좌굴 구간에서는 정현파형상이 전단좌굴에 저항하는데 유리하게 작용하였다.

The conventional brace system is generally accepted lateral load resisting system for steel structures due to efficient story drift control and economic feasibility by frame materials decrease. But the lateral stiffness of the brace decreases following buckling in this system and buckling causes unstable structures with strength deterioration hysteresis performance. Buckling restrained brace system that performs stable behavior after yielding of core element prevented from buckling by tube element is better than conventional brace system in point of earthquake energy absorbing capacity. In this study, the seismic performance of the multi-story steel frames applied for brace and buckling restrained brace is respectively analyzed, so that, the damage of two systems is quantitatively evaluated by analyzing energy absorption capacity.

This study analyze the buckling characteristics of trapezoidal and sinusoidal corrugation shapes with same weight. To do this, analyze the shear buckling characteristics through linear buckling analysis and on its theory.

These days System supports are generally used at the construction sites. But the Structural capacity and Stability of the System Supports are not reviewed properly. The structural capacity of System Support should be evaluated by considering unbraced buckling length.

파형강판은 제형, 정현형 등의 형상으로 얇은 강판을 주름지게 가공한 것으로 두꺼운 평판을 대신하여 사용하여도 높은 면외방향의 강성을 확보할 수 있다. 또한, 아코디언효과로 축방향 강성이 거의 없어 플레이트거더의 웨브에 적용할 경우 웨브가 전단력만을 부담하는 방법으로 쉽게 설계할 수 있다. 그러나 파형강판의 전단좌굴은 평판과는 달리 국부좌굴과 전체좌굴 외에도 이들의 연성에 의해서도 좌굴이 발생하는 매우 복잡한 특성이 있으며, 이러한 연성좌굴에 대한 원인과 특성의 규명은 정현형의 경우 제형보다 연구결과가 부족한 실정이다. 따라서 본 연구에서는 정현형 파형강판의 전단좌굴 특성과 연성좌굴이 발생하는 경향에 대해서 연구하였다. 전단좌굴강도를 계산하기 위해서는 유한요소프로그램을 이용하였고 해석결과를 정해와 비교하였다. 또한, 주름의 두께와 형상 파라메타에 따른 좌굴응력 변화의 특성과 좌굴모드형상의 변화를 분석하였으며, 이들의 결과를 이론식의 결과와 비교하여 좌굴양상의 변화시점에 대해서 분석하였다.

The conventional brace system is generally accepted lateral load resisting system for steel structures due to efficient story drift control and economic feasibility by frame materials decrease. But the lateral stiffness of the brace decreases following buckling in this system and buckling causes unstable structures with strength deterioration hysteresis performance. Buckling restrained brace system that performs stable behavior after yielding of core element prevented from buckling by tube element is better than conventional brace system in point of earthquake energy absorbing capacity. This system has the advantages of maintenance, economics and satisfying the performance objective for seismic design. So recently, research and technology development of buckling restrained brace system increase. The existing buckling restrained braces have been developed in various sections and connection types with structures while the research considering production and construction availability, lateral constraints of core-end and matching with the construction plan is insufficient. Accordingly in this study, the optimum alternative system of the buckling restrained brace satisfying the above conditions and system application expansion possibility is suggested.

Corrugated steel plates have been used in civil engineering applications such as buildings and bridges, and many studies. These corrugated plate has geometrical characteristic – accordion effect. This study analyzed the elastic shear buckling about geometric parameters of sinusoidal and trapezoidal corrugated plate.

Corrugated plate is occurrence that the local buckling, global buckling and interactive buckling because of the geometric properties. However, It was difficult to predict the shear buckling behavior. This study analyzed the elastic shear buckling about geometric parameters of sinusoidal and trapezoidal corrugated plate.

In this paper, the dry solution for restraining the buckling failure of steel brace with the semicircle springs is presented. Finite element analysis shows that the effects of restraining the bucking of brace can be achieved if the structure of semicircle springs is designed appropriately.