This paper analyzes the difference between theoretical cost of quality and real world cost. Examined are the theoretical cost structure of quality, it’s measurement styles, a process based improvement strategy of quality cost, and possible adaptation of d

This paper analyzes the difference between theoretical cost of quality and real world cost. Examined are the theoretical cost structure of quality, it's measurement styles, a process based improvement strategy of quality cost, and possible adaptation of decision making concepts in enhancing the cost structure. This study will contribute to the literature in delineating an improvement process of quality cost by adjusting service policy.

Recently expanding market for largely scale construction projects, cost management of construction project have been increasingly recognized as an important factor responsible for the project success. But public organizations have been continuously operating the same methods as before in cost estimating, so it raise an issue of reliability for estimated cost. Therefore, this study present a highly reliable model that makes preliminary estimates based quantity data in early design stage. it enables engineers to efficiently manage total cost of project as well as partial cost estimating. This study develop a model of database that is created with historical data conducted by government offices. The model proposed can estirnate a cost for RC Structure in schematic design stage, and it is applied to CBR+GA logics to explore best similar cases. In case of estimating methods used to previous research, it is based on actual cost data. Due to the cost estimating compensated by inflation rate vary in market economic conditions, it will follow as an inevitable consequence of reliability problem. It needs to find better way to ensure accuracy through quantity database. Also, This study has been conducted in attempts to verify the reliability of preliminary estirnation. It is checked for the feasibility of presented model with P-National Tax Service Project aside from the database.

Coconut shell activated carbon (CSAC) was investigated for its ability in the removal of two neutral chlorinated organic compounds, namely trichloroethylene (TCE) and dichloromethane (DCM) from aqueous solution using a packed bed column. The efficiency of the prepared activated carbon was also compared with a commercial activated carbon (CAC). The important design parameters such as flow rate and bed height were studied. In all the cases the lowest flow rate (5 mL/min) and the highest bed height (25 cm) resulted in maximum uptake and per cent removal. The experimental data were analysed using bed depth service time model (BDST) and Thomas model. The regeneration experiments including about five adsorption-desorption cycles were conducted. The suitable elutant selected from batch regeneration experiments (25% isopropyl alcohol) was used to desorb the loaded activated carbon in each cycle.

본 연구에서는 국내 LTPP 구간에서 수행된 FWD 시험의 결과를 바탕으로 섬유보강, 폴리머 개질, 일반 아스팔트 포장의 구조적 성능을 비교 평가하였다. FWD 시험 결과, 표층 하단부의 인장변형량이 섬유보강 아스팔트는 29%, 폴리머 개질 아스팔트는 21% 저감되는 것을 확인하였다. 또한 FWD 처짐량을 역산하여 각 층의 탄성계수를 추정한 후 이를 바탕으로 AASHTO 설계방법, 구조적 해석 방법 및 생애주기비용분석을 통해 섬유보강 및 폴리머 개질 아스팔트 포장의 비용 효과를 분석하였다. 분석 결과, 섬유보강은 약 5cm, 폴리머 개질은 약 3cm의 아스팔트 층 두께 감소 효과를 보여주었다. 그러나 섬유보강 및 폴리머 개질 아스팔트의 고가격으로 인하여 전체 시공재료비는 일반 아스팔트 포장에 비해 상승하는 결과를 보여주었다. 생애주기비용 결과는 초기 공사비는 섬유보강 및 폴리머 개질 아스팔트 포장이 높지만, 유지관리비용 및 사용자비용은 감소하는 것으로 나타났다.

This study was conducted to provide basic data and insight into behaviors that result in increased continuous sales and competitiveness. This was done by examining the effect of personal involvement on customer satisfaction and trust, the effect of customer satisfaction on switching cost and loyalty, the effect of trust on switching cost and loyalty and by analyzing the indirect effect of trust and loyalty to personal involvement on switching cost and loyalty of the patrons of casual dining restaurants. In order to achieve the goals of the study, a hypothesis and structural equation were proposed based on preceding research and the proposed model was analyzed using LISREL 8.30 to prove the hypothesis and better understand the interactions between the cause and effect. The results were as follows: Six proposed hypothesis were chosen and the indirect effect was verified. In other words, customers' personal involvement was shown to have an effect on trust and devotion and satisfaction influenced switching cost and loyalty. Trust had an effect on switching cost and loyalty and by analyzing the indirect effect the customers' personal involvement was shown to affect the switching cost and loyalty through satisfaction and trust. The result of this analysis provides clues to better understand the eating-out behavior of customers and proves that personal involvement, satisfaction, trust, switching cost and loyalty are directly and indirectly related.

This paper studies that б values(10, 20, 50)and ρ values (-0.6, -0.3, 0.0, 0.3, 0.6) affect the total inventory cost of a supply chain and order fill rate when the market demand process follows a general auto-correlated AR(1) process without seasonality.

A prediction of construction cost in preparation for construction document is calculated in compliance with the unit cost in Public construction of korea. This eventually means that the reasonable construction cost of a building can't be determined before construction document phase cost of construction is settled and that the cost of construction is calculated inefficiently because of connection failing between cost management of detailed estimation and information. To improve those problems, therefore, Cost estimating model of structural building elements with approximate quantity survey method is suggested in this research. The model predict the amount of materials and the cost of construction on the basis of historical similar cases. In the direction of data analysis of this research, ratio statistics value is put to practical use to fit into the peculiarities of approximate estimate of each work trade on the basis of actual data amount of materials of historical cases. In addition, the construction phase is connected through the result of a approximate estimate sorted by elements, details work trade.

농산물의 비용계산에서 생산비는 농산물의 적정가격 결정, 농업정책수립의 기초자료 및 농가지도의 중요한 지표로 활용되어 왔지만, 개별 농업경영체의 경영계획수립, 경영진단 등을 위해서는 원가개념의 도입이 필요하다. 그러나 농업부문의 비용계산에서 원가회계의 도입은 이루어지지 않고 있다. 본 연구에서는 농산물생산비의 목적, 개념, 대상, 기간 등에서 농산물의 원가 산출의 기준이 되는 원가계산준칙과 관련된 문제점을 비판적으로 검토하여 농산물의 비용계산을 위한 원가회계의 기본방향을 제시하였다.

An optimal selection problem of SCM system is one of the critical issues for the company's competitiveness and performance under global economy. This paper presents a hierarchy model consisted of characteristic factors for introducing SCM system and an AHP (Analytic Hierarchy Process) based decision-making model for SCM system evaluation and selection. The proposed model can systematically construct the objectives of SCM system selection to meet the business goals. This paper focuses on selecting an optimal SCM system considering both all decision factors and sub-decision factors of a hierarchy model. Especially, the benefit/cost analysis is applied to choose SCM system. A case study shows the feasibility of the proposed model and the model can help a company to make better decision-making in the SCM system selection problem.

As the industry develops, the amount of wastes is increasing in the economic system with various needs. As a result, the environmental problems are emerging as serious social issues and all the parties are required to make their best efforts. Among the issues proposed as the environmental issues, the logistics-related issues are exhaustion of the resources, global warming, environmental pollution, and acidification and so on. In order to respond to the environmental issues of the earth, the advanced countries are setting retrenched goals, reduction of the new greenhouse gases and accomplishment of retrenched goals by cooperation between the nations. Economic activities inevitably bring environmental problems and logistics is implementing those activities. The companies should perform the roles to resolve the environmental problems as the main cause of environmental pollution. Therefore, along with spreading recognition of social demand, the companies are required to establish policies regarding the environment and they should approach the issues from the perspective of resource circulation. These environment-friendly activities are emerging as the new source of competitiveness in the logistics field. Therefore, this study analyzes the effects of environment-friendly logistics activities on the reduction of logistics cost to reduce and resolve the environmental issues such as environment preservation, recycling and so on.

This paper considers a six sigma project for reducing the cost copper of the cable materials in a electric wire company. The project follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). A process map is used to identify process input variables. Three key process input variables are selected by using an input variables are selected by using an input variable evaluation table: large cable, plating, and a twisted pair. DOE is utilized for finding the optimal process conditions of the three key process input variables. The implementing result of this six sigma project is enable for reducing of the 2.8% copper materials.

The use of the gas turbine for power supply is increasing recently. Accordingly, the operation and maintenance cost of the gas turbine is gradually increasing and the various efforts to cut the cost are needed. For an operation and maintenance cost saving of the gas turbine, reductions of the new purchasing charge and the reproduction repair cost of the hot gas parts are required through more effective operation and life management methods for the hot gas parts. The hot gas parts are the main parts of the gas turbine and they are replaced with the periodic. In this research, efficient operation and life management methods for the hot gas parts were presented with the cases. The methods were analyzed and verified based on real data and the cases for improving a lifetime were utilized in the field.

This study was carried out to evaluate the Life Cycle Cost(LCC) of four types of BIPV(Building Integrated Photovoltaic) systems -Glass plus Granite, Crystalline BIPV, Crystalline BIPV + Glass plus Granite and See through Amorphous BIPV -which were vertically installed to generate the same capacity(2kW) and the same area. Initial investment costs, cost savings and maintenance costs had been predicted during the period of analysing the LCC of four types of BIPV(Building Integrated Photovoltaic) systems installed for the purpose of evaluating the LCC. In case of cost savings, it had been analyzed by measuring the amount of electric power generated, reduction in lighting load and heat & cooling loads through simulation. From this analysis, it was predicted that the See-through amorphous BIPV offering cost saving advantages demonstrated the economical efficiency similar to the Glass plus Granite when it is backed by more than 20 years of durability.

When managers predict exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But present of public construction cost estimation and management almost after the construction documents design phase. Therefore, construction cost management in the early stage and schematic design phase to generally use approximate estimating is not correct. Accordingly, this study analyze problem of current cost estimating method and a concrete cost plans make using case information of actual cost to analyze in schematic design phase. Possible to check going on the suitable design, this study conducts the preliminary research for the development of cost estimating model.

팽이버섯 생산비용을 절감하기 위하여 한번 사용한 배지의 적정 혼합비율을 구명하고자 시험한 결과는 다음과 같다. 팽이버섯 재배 배지재료로 미송톱밥, 1회 팽이버섯 재배에 사용한 톱밥, 콘코브 그리고 영양원으로 미강과 밀기울을 이용하여 14가지로 배지를 조성하여 균사배양기간, 자실체 수량과 품질을 조사하였다. 두 가지 영양원에 따라 배양기간은 큰 차이가 없었지만 유효경수, 자실체 수량과 품질은 밀기울보다 미강이 좋았다. 폐배지를 20% 혼합한 처리 즉 미송톱밥 60%+폐배지 20%+미강 20% 배지가 관행처리 미송톱밥 80%+미강 20% 배지와 품질은 비슷하며 수량은 142.2g 으로 관행의 130g 대비 10% 증수하였다. 그러나 폐배지 혼입량이 증가함에 따라 자실체의 품질과 수량이 현저하게 감소하였다. 따라서 폐배지의 적정 혼합량은 20%이며 수량도 10% 증가하였다.

장미 생산농가의 대부분은 겨울철 난방비가 생산비의 가장 큰 몫을 차지한다. 요즘과 같은 고유가 시대에 농가의 부담을 줄이기 위하여 난방비 절감율이 높은 난방시스템에 대한 연구를 수행하였다. 복사열을 이용한 적외선 등 난방의 경우 식물체와 같은 물체를 먼저 가열하여 주변의 기온이 올리는 방식으로 빠르게 온도를 높일 수 있고 경유를 이용한 난방방식에 비해 비용이 절감되는 장점이 있다. 농가에 설치된 나노탄소 섬유 적외선 등 난방시스템의 현지조사를 실시하여 난방효과 및 난방비 절감율을 분석하고, 나노탄소섬유 적외선 등 난방시스템과 전기히터 난방시스템에서 생산된 '오렌지 플레쉬' 장미의 생육과 절화수명을 조사하였다. 나노탄소섬유 적외선 등의 경우 온실 내부 공기 설정온도가 20℃인 경우 식물체 온도는 1~2℃정도 더 높게 나타났을 뿐만 아니라 베드와 근권부 온도는 17~19℃ 정도로 유지하는 등 우수한 난방의 효과를 알 수 있었고, 전기히터 난방시스템과 온수보일러 난방시스템의 추정 난방비를 비교한 결과 난방비 절감 효과가 아주 높게 나타났다. 장미의 생육을 조사한 결과 전기히터 난방시스템에서 생육한 장미와 차이가 없었으며 화색이나 염색의 발현이 더 좋았다. 절화수명에서는 나노탄소섬유 적외선 등에서 생육한 장미가 생체중과 수분 흡수량이 높아 다소 더 길어진 절화수명을 뒷받침 해 주었다.

실적공사비 적산방식은 품셈견적, 실측견적, 단가견적, 및 총액견적 등 매우 다양하다. 표준품셈은 공공기관 및 민간기관의 공사비 책정기준이 되는 자료이다. 본 논문에서는 도로공사에 이용되는 기존 품셈견적의 문제점을 개선하기 위해 현장조사를 실시하고 분석하였으며 그 결과로 각 공종에 대한 실측견적 방법을 통계적 방법을 통해 제시하였다. 또한, 기존 품셈과 실측품셈을 공사단위의 비교를 통해 제안된 품셈이 보다 간단한 견적 작성을 가능하게 하고 보다 현실적인 공사금액을 산출함을 알 수 있었다. 본 연구에서는 보조기층의 Case-Study를 통하여 각 방식별 장단점을 가시적으로 비교해 보았다. 실측품셈으로 적용하였을 경우, 계산과정은 기존품셈의 50%로 축소되었으며 1일 1장비 사용으로 기존의 1일미만 장비 사용에 대한 편차가 보완되었다. 또한 품셈만을 이용하여 공정의 시공내용을 짐작하고 이를 바탕으로 공정계획이나 인력투입계획 등을 수립할 수 있었다.