The adjudication of Korean Maritime Safety Tribunal (KMST) was analyzed to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) in stow net fishing vessel from 2015 to 2019. The personnel’s carelessness was the most common in 29 out of 33 accidents (87.9%), followed by 25 cases (75.8%) of inadequacy of instructions, 24 cases (72.7%) of inadequacy of education on hazard factor, 20 cases (60.6%) of no personal protection equipment, 18 cases (54.5%) of poor guard, 17 cases (51.5%) of inadequacy of work method, 16 cases (48.5%) of absence of emergency stop button, 14 cases (42.4%) of work practice of poor safety precautions that affected more than 40% of all accidents as accident causes. These causes had a strong influence on each other, and the ratio of accident causes is high. With this relationship, accidents can be prevented or the severity of human injury can be reduced if types of accident process can be estimated with a scenario, and the key points before the accident in the scenario are switched to safe points.

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel’s carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen’s occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

In this study, the conventional cylinder-shaped lower bar on the canvas was modified and its performance was tested to improve the opening force of the stow net on anchor. The improved new lower bar used in the test is consisted of 13 flat bars with a length of 1.8 m, a width of 0.075 m and a thickness of 4 mm, and a pipe with a length of 2.0 m and a diameter of 50 mm. A stow net with the improved lower bar and a stow net with an existing lower bar were installed underwater and their trajectories for 21 hours were examined. To confirm their trajectories, GPS loggers were attached to the buoys on the left and right canvases and the buoy of the hauling rope. As a result of the test, the rotation of the gear with the improved bar was smoother than that with the existing bar. As a result of comparing the changes in the interval of the buoys attached to the canvas after the low and high tide, the buoy spacing of the gear with the improved bar is wider than that of the conventional gear; moreover, the larger the interval, the smoother the rotation of the fishing gear was. Therefore, it is considered that using the improved lower bar can enhance the performance of the stow net.

The coastal stow net (stow net hereafter) in Korea is one of the major fishing methods for yellow croaker (Larimichthys polyactis), ribbon fish (Trichiurus lepturus), and anchovy (Engraulis japonicus). In terms of energy efficiency, the stow net fishery is more competitive than towing fishing gears such as trawl gears. The fishing vessels in stow net fishery have consumed less fossil fuel and also have had less carbon dioxide emission into the atmosphere. however, the stow net fishery is necessary to be regulated due to its increased output of the fleet. Therefore, it is required for fisheries authorities to manage the fishing capacity or fishing power for the assurance of fishery’s sustainability. For fisheries management authorities, it is necessary to quantify data related to fishing capacity and fishing power to deploy fishery policy in a sustainable way. In terms of data for decision-making, Data envelopment analysis (DEA) method was conducted to estimate fishing capacity. Fishing power index (FPI) was also applied to calculate relative fishing power to approach the problem in a quantitative way.

한강 하구 해역에서 2010년 4월부터 2011년 11월까지 총 9회에 걸쳐 출현한 생물은 5 분류군 61과 126종이었다. 갑각류는 18과 34종, 두족류는 3과 5종, 어류는 35과 79종으로 분류되었으며, 그 외 종단위로 분류되지 않은 자포동물류인 해파리류와 포유류에 속하는 상괭이가 출현하였다. 한강 하구 해역의 출현종의 대부분은 어류와 갑각류로 구성되었다. 연구기간동안 주된 우점 종은 그라비새우, 꽃게, 밀새우, 갯가재 등이었으며, 어류로는 웅어와 싱어이었다. 우점한 6종에 대한 체장조성 및 평균체장을 살펴보면, 하나 이상의 체장모드를 가지는 것으로 나타났다. 하나 이상의 모드를 가지는 것은 한강 해역에 출현하는 종들이 일정시기 또는 일생동안 한강 하구 해역에서 서식하며, 산란장 또는 성육장으로 이용하고 있다는 것을 반영한다. 한강 하구 해역중 강과 가장 가까운 정점인 더리미에서는 민물어류가 출현하였으며, 홍수 등 담수의 대량 방류 시기와 조사 시기가 일치하는 경우에 민물어류가 하구 해역에서 채집되는 것으로 생각된다. 연도별 정점별 종조성을 이용하여 주성분분석을 실시하였다. 그 결과 종조성은 조사시기별 정점별 차이를 나타내었다.

Experimental fishing was carried out to compare the catches of main species and bycatch according to the codend mesh size (raschel, 15mm, 25mm, 35mm, 45mm) of stow net on anchor in the coastal waters of Seocheon after manufacturing five kinds of fishing gears and commercial fishing boat (7.93 tons) was used for it. Anchovy (Engraulis japonicus), southern rough shrimp (Trachysalambria curvirostris), beka squid (Loligo beka), cuttle fish (Sepia esculenta), swimming crab (Portunus trituberculatus) were dominant on the five kinds of experimental fishing gears. Southern rough shrimp was caught from all kinds of fishing gears and catches of anchovy was highest in the raschel codend, southern rough shrimp for 15mm, 25mm, 35mm codend and beka squid for 45mm codend. Bycatch proportion against total catches was 623,376g (28.7%) for 2,171,844g in raschel, 11,932g (1.7%) for 704,451g in 15mm, 3,616g (1.6%) for 221,432g in 25mm, 9,276g (4.9%) for 191,052g in 35mm and 2,724g (5.3%) for 51,431g in 45mm.

Experimental fishing was carried out to compare fishing status according to the codend mesh size (raschel, 15mm, 25mm, 35mm, 45mm) of stow net on anchor in the coastal waters of Seocheon after manufacturing five kinds of fishing gears and commercial fishing boat (7.93 tons) was used for it. Total catches of raschel, 15mm, 25mm, 35mm, 45mm codend were 816,949g, 203,994g, 1,405g, 51,576g, 194g in September and 40,545g, 66,974g, 14,692g, 12,647g, 12,655g in October. Dominance species were anchovy (Engraulis japonicus) in raschel codend, largehead hairtail (Trichiurus lepturus) in 15mm and 35mm in September, and the amount of catches was very small in 25mm and 45mm codend due to the fishing gear damage. In October, dominance species were anchovy and beka squid (Loligo beka) in raschel, 15mm, 25mm codend, and cuttlefish (Sepia esculenta) and beka squid were mainly caught in 35mm and 45mm codend. In addition, total length of anchovy and cardinal fish (Apogon lineatus) were increased according to the increase of codend mesh size but there was no difference in the mantle length of cuttlefish and loligo beka.

Because stow net being used in now is doing throwing net and hauling net through a ship's side, the work is very complicated and the fishing boat needs many seamen and it could cause a loss of lives and ship in stormy weather. We are now using small mesh size 36~500mm and it even catches young fish, so we call it the fishing gear of resource reduction type.Therefore we must make manpower reduction in automatic operation, safe operation of throwing net and hauling net in the stern and the stern-typed stow net of resource management using large mesh. And we performed three-typed model tests to examine the fishing gear. The obtained results are as follows;1. The fishing gear being used in the ship's side type stow net has inappropriate standard and arrangement of the net, resistance increase of the fishing gear and frequent breakdown of the net.2. To supplement the fault of A-typed stow net, we schemed fishing gear developed as both B-type(12-seamed net) and C-types(8-seamed net) of the stern-typed stow net. 3. In model tests, C-typed model net(mesh size 40~1,600mm) was proved good fishing gear because the resistance in accordance with the flowing speed was comparatively small and it's mouth area was broad. 4. A-typed stow net had the spreading device attached to side panel of the net, but the stern-typed stow net had the spreading device consisted of 4 lines far behind about 6m from side panel of the net mouth. In the flowing speed 2knot, the spreading condition of fishing gear was proved batter than the former.

Our status of off-shore stow-net fishery is in face with many difficult problems; the lack of fisherman by evading the 3-D occupation, the safety accident by unskilled crew and old type fishing system. In order to solve those problems, it is necessary to save the man power and ensure the safety of fishing work by the effective utilization of power and automatization of fishing gear system. This is consists of the side drum driven by main engine, the net hauler, the bow and stern capstan, jib crane etc. Therefore, we suggest the design on unification of power device of fishing gear system as follows; (1) fishing system by uni-hydraulic power and (2) fishing system by electric motor and electro-hydraulic power.