급격한 산업과 경제의 발전은 화석연료와 자원의 대량사용을 촉진시키면서 기후변화 및 대기․수질․토양오염 등의 환경문제를 야기하고 있다. 이 중 토양으로 유출된 중금속은 심각한 오염원 중 하나로, 인체에 대한 독성발현에 그치지 않고 생태계의 교란을 가져와 오염지역을 황폐화시킬 수 있는 것으로 평가된다. 폐광산지역의 토양오염은 광미 및 산성폐수가 강우 등에 의하여 중금속의 거동에 영향을 주며 인근 환경에 위협을 주는 것으로 알려져 있다. 비소는 자연계에서 혹은 산업 활동에 의하여 유출되어 무색무취의 상태로 인체에 흡수될 수 있으며 만성질환을 일으키거나 발암물질로 작용할 수 있는 것을 그 특징으로 한다. US EPA는 음용수를 대표적인 비소에 대한 노출경로로 지적하면서 토양에서 수환경으로 이어질 수 있는 중금속 오염에 대한 정화공법의 개발 필요성을 제시하고 있다. 본 연구는 연속추출법을 통하여 실험실 규모에서 비소로 오염된 토양에 대한 탈착특성을 분석하고, 이를 통하여 향후 현장규모에서 MIO를 이용한 토양세척법에 의해 선택적으로 비소를 제거하는 방안의 기초자료를 제시하는 데 그 목적을 가지고 있다. 이를 위해 대상 시료는 국내에 가장 높은 비율로 존재하는 토성인 사양토를 채취하여 토양오염기준에서 우려 및 대책농도인 25-75 mg/kg 범위로 오염시켜 확보하였으며, 각 농도별 토양에 대한 연속추출을 시행한 뒤 AAS(Atomic Absorption Spectrometer, Shimadzu AA-7000, Japan)에 의한 용출농도를 측정하였다.
This study analyzed concentration and characteristics of hazardous substances in treatment of leachate from carcass burial areas by using high temperature thermal desorption (HTTD). Concentrations of pollutants emitted from HTTD treatment of leachate contaminated soil of carcass burial sites satisfied the emission standards for 11 pollutants from domestic waste incineration facilities. Dioxin concentration was 0.0060 ng I-TEQ/Sm3 and 0.0061 (0.0055-0.0070) ng ITEQ/ Sm3 in the normal operation condition and the experimental condition, respectively, which are much lower than the MSWI Standard of 0.1ng I-TEQ/Sm3. As a result, it was considered that leachate from carcass burial areas could be treated by high temperature thermal desorption (HTTD).
The purpose of this work is to study the desorption characteristics of water vapor on zeolites saturated with water vapor. Three kinds of zeolite; zeolite 3A, zeolite 4A, and zeolite 5A were used as adsorbent. The desorption experiments with several different temperatures in the range of 90∼150℃ and several different flow rates in the ranges of 0∼0.4 L/min on zeolite bed were carried out. The desorption ability of water vapor was most effective on zeolite 5A among the compared zeolites. The higher the desorption temperature of water vapor was, the faster the desorption velocity was. The desorption ability of water vapor with an air supply was higher than that without an air supply. The most appropriate air flow rate was considered as 0.1 L/min.
The purpose of this work is to study the adsorption and desorption characteristics of acetone vapor and toluene vapor from adsorption tower in the VOCs recovery device. The six kinds of activated carbon with different pore structures were used and the adsorption and desorption characteristics were compared according to pore structure, desorption temperature, and adsorption method, respectively. Adsorption capacity of acetone vapor and toluene vapor by batch method was higher than that by dynamic method. Especially, activated carbon with medium-sized or large pores had more difference in adsorption capacity according to adsorption methods as a result of gradually condensation of vapors on relatively mesopore and large pores. Activated carbons with relatively large pores and relatively small saturated adsorption capacity had excellent desorption ability.
카올리나이트 KGa-1b (표준 점토)의 인산염 탈착 특성을 규명하기 위하여 벳치(batch) 흡착-탈착 실험을 실시하였으며, 탈착 과정은 연속추출법에 따라 pH 4에서 시행하였다. 인의 함량은 UV 분광분석기를 시용하여 측정하였으며, 이 때 파장은 820 nm를 이용하였다. 카올리나이트의 인산염 흡착-탈착 반응은 비가역적으로 일어나며, 흡착된 대부분의 인산염은 고착되는 경향을 나타낸다. 인산염 탈착 등온선은 반응 시간이 짧은 경우 프로인드리히 등온선에, 반응 시간이 긴 경우 탬킨 등온선에 더 일치하는 경향을 보인다. 인산염 탈착 반응은 초기의 빠른 반응과, 후기의 느린 반응으로 구분된다. 흡착된 인산염의 농도가 높아질수록 탈착률은 감소하는 경향을 보이며, 탈착 시간이 길어지면 탈착률은 감소하는 경향을 보여준다.
카올리나이트 KGa-2 (표준 점토)의 인산염 흡착-탈착 특성을 규명하기 위하여 벳치(batch) 흡착 실험을 실시하였으며, 흡착 상태를 알아보기 위하여 ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) 분광분석을 실시하였다. 인의 함량은 UV-VIS-IR 분광분석 기를 사용하여 측정하였으며, 이 때 파장은 820 nm를 이용하였다. pH 4에서 pH 9 범위 내에서 카올리나이트 KGa-2의 인산염 흡착량은 pH가 증가하면 대체적으로 증가하는 경향을 나타내지만, 인산염 농도에 따라 매우 다른 형태를 보여준다. 카올리나이트 KGa-2의 인산염 흡착 특성은 랑미어 흡착등온선, 템킨 흡착등온선, 프로인드리히 흡착등온선 순으로 잘 부합하며, 랑미어 최대 흡착능은 204.1~256.5 mg/kg, 평균간은 232.5 mg/kg으로서, 카올리나이트 KGa-1b에 비하여 높은 인산염 흡착능을 가진다. 카올리나이트에 흡착된 대부분의 인산염이 탈착되기보다, 광물 내에 고착되는 경향을 나타내지만 이에 대해서는 후속적인 실험이 필요한 것으로 판단된다. ATR~FTIR 스펙트럼에서 카올리나이트에 의한 흡수피크의 위치가 인 피크와 거의 중첩되고, 카올리나이트에 의한 흡수 피크의 강도가 인 피크에 비하여 월등히 크기 때문에 카올리나이트에 흡착된 인에 의한 피크를 카올리나이트 자체에 의한 피크로부터 분리하는 것이 거의 불가능하였다.
This paper describes the adsorption/desorpton efficiency of a modified activated carbon by irradiated microwave to treat toluene. By employing microwave energy, the regeneration time was considerably shortened compared with conventional thermal heating regeneration. New adsorbent called ACB(Activated Carbon-Bentonite) was prepared from powder activated carbon with mixing bentonite as a binder. Specific surface area, average pore size and total pore volume of ACB were calculated from the nitrogen adsorption/desorption isotherm. The surface of ACB was characterized with scanning electron microscope(SEM). The results showed that the specific surface area, total pore volume, average pore size of ABC was not influenced by regenerating cycle with microwave irradiation. Toluene was adsorbed onto ACB which desorbed by MW irradiation. Absorption capacity of ACB was 0.117 gtoluene/ gACB. Desorption efficiency of toluene increased as higher microwave output was applied.
This study was performed : 1) to establish the experimental analysis conditions for the sorption and desorption of toxic organic contaminants to/from the activated sludge, sediment, and clay, and 2) to determine the sorption and desorption equilibrium coefficients of some representative halogenated aliphatic compounds. Through the preliminary sorption test using Azo dye, a setting of quantitative experimental conditions to determine the sorption and desorption characteristics was decided as follows; equilibration time of 180 minutes, centrifuge for 15 minutes at 5000×g, and 500㎎/ℓ of TOC concentration. The sorption and desorption characteristics of halogenated aliphatic compounds onto activated sludge, sediment and clay could be described very well using the Freundlich isotherm. The preference of the average sorption capacity of the overall compounds showed in the sequence sediment 0.26㎎/g, clay 0.23㎎/g, and activated sludge 0.11㎎/g. The desorption rate of the sorbed compounds onto activated sludge, sediment and clay was approximately 89.8%, 35.3%, and 66.4%, respectively.
Laboratory experiments were conducted to examine the behavior of metalaxyl in environment, which was used as pesticide in green soil of golf course and as functions of the characteristics of adsorption, desorption and degradation in soil texture and organic matter contents. Acid water containing metalaxyl was conducted to evaluate the effects on adsorption, desorption and degradation.
The adsorption of metalaxyl played more significant role in organic contents than clay contents, and pH increases more pH 2.5 than pH 5.6. The desorption of metalaxyl from contaminants soil decreased higher organic contents LS-soil than S-soil, but the desorption amount of metalaxyl increased more pH 5.6 than pH 2.5.
The rate of degradation of metalaxyl in green soil environmental increased higher organic contents LS-soil than S-soil and decreased more pH 2.5 than pH 5.6.
These results indicated that the behavior of metalaxyl of the green soil was affected the soil texture of the golf course. Increasing of organic contents, the adsorption amount of metalaxyl on soil increased. Moreover, the decrease of the pH of solution increased adsorption amounts and decreased desorption amounts. As the results, the transportation of metalaxyl in soil decreased the acidic rates.
The acidification of soil by the acid rain increased the adsorption amount of metalaxyl, but the degradation of metalaxyl decreased. Therefore, it is possible to sustain contamination in run-off the stream and ground water by residuals in soil.