In this study, CGS is a concrete admixture material that has been investigated as a way to promoto recycling of CSG. As results, Show that the early strength is low and the activity index is according to the degree of fineness is insignificant

In this study, a series of studies is intended to elicit the improvement of the quality of Admixture Substitute Concrete using oil refined for petrochemical work (ERCO). In other words, ERCO is used to analyze the basic properties of Admixture Substitute Concrete by pre-adding the AE liquid solution on its products. As an experimental variable, the method of adding ERCO was added after mixing it with concrete. In addition, the mixing ratio was planned to be 2 levels of 0, 0.5 %, and the total volume of the AEs injection quantity is 5 % that combines 0, 1, 2, and 3 % of the mixed ERCO mass of concrete. As a result, as the pre-injection of AE was increased, the characteristics of the concrete showed that the slump, and air contents were not improved, and the pre-adopting effects of AE agent were also significantly increased in the concrete.

콘크리트는 장기수명이 요구되는 구조물에 적합한 건설재료로 내구성이 우수하지만 장기간 지하수에 노출되어 발생하는 칼슘용출 현상에 대한 이해 및 이에 따른 RC 부재의 휨 거동 특성을 평가할 필요가 있다. 실험결과에 따르면, 광물질 혼화재는 RC 부재의 장기강도 개선에 효과적이지만, 칼슘용출이 발생하면 RC 부재의 항복하중 및 휨 강성이 감소하고 중립축깊이와 처짐량이 증가하는 것으로 나타났다. 따라서 칼슘용출에 의한 열화는 RC 부재의 성능 저하를 유발하므로 칼슘용출 환경에 노출되는 지하구조물에 광물질 혼화재가 적용될 경우에는, 광물질 혼화재 종류에 따른 최적 혼입 비율이 마련되어야할 것으로 사료된다.

In this paper, Results of mock-up test for mitigating carbonation of high volume mineral admixture concrete by spreading waste cooking oil. Concrete incorporating 60% of BS and 30% of FA with the size of 900×600×200 are discussed. Denatured Silicate paint is also applied to compare the performance. Test results indicate that the application of ERCO and DSP enhance carbonation resistance.

Concrete is a very useful construction material for the sealing disposal of hazardous substances. In general, mass concrete is applied to these structures. And, the mineral admixtures are recommended for the long term performance. Calcium leaching could be happened due to the contact with pure water in underground structures. Thus, it is needed to evaluate the resistance of calcium leaching for concrete mixed with mineral admixtures. From the test results, the mineral admixtures are effective to the improvement of long term compressive strength and chloride diffusion coefficient in concrete members. When calcium leaching is happened, however, the reduction of compressive strength and chloride penetration resistance is severe than OPC case, the micro pore distribution is adversely affected. Consequently, when the mineral admixtures are applied to underground structures which is exposed to calcium leaching environment, it is desirable to reduce water-to-binder ratio, to expose after the sufficient pozolanic reaction, and to use BFS than FA.

This study is to be suggest the optimal mat foundation mixing design of high strength concrete by using fly ash and retarding admixture. This study applied retarding admixture to high strength concrete over 40MPa, and tested the mechanical properties of concrete according to binder content(385∼415kg/㎥), fly ash substitution rate(0~25%), and adding rate of retarding admixture(0~1.2%) As a results, For the concrete to be applied to lower part of mat foundation, it is suitable to substitute FA 25% with binder contents 385kg/㎥ and to apply the mixing with adding retarding admixture 1% in order to repress hydration heat and to cast concrete at once through congelation delay. As a result of experiments of adiabatic temperature rising, coefficients of adiabatic temperature rising K and α were 40.68 and 1.08 for retarding-type concrete and 42.8 and 1.13 for standard concrete, respectively, under the condition of initial concrete temperature about 19℃. In the identical temperature condition, differences of adiabatic temperature rising speed according to use of retarding admixture were not different, and maximum value of adiabatic temperature rising of retarding-type concrete was lower than standard concrete. Keywords: Retarding Admixture, High Strength Concrete, Mat Foundation, Fly Ash, Adiabatic Temperature Rise

본 논문은 강섬유의 일부를 철근집합체로 대체하여 초고강도 섬유보강 철근 콘크리트 I 형보의 연성거동을 유도하는 것을 목적으 로 한다. 강섬유와 철근집합체의 조합을 가진 초고강도 콘크리트 I 형보 대한 휨거동 실험을 수행하였다. 강섬유의 혼입률은 0%, 0.7%, 1%, 1.5%, 2%이다. 철근집합체와 PS강연선 집합체가 압축구역에서 콘크리트를 구속하기 위해 사용되었다. 철근집합체와 강연선 집합체의 길이 도 실험요소 중 하나이다. 이러한 실험요소를 조합하여 9개의 초고강도 철근 콘크리트 I 형보를 제작하였다. 강섬유 뿐만 아니라 종방향의 철근 집합체도 초고강도 철근 콘크리트 I형 보의 연성거동을 유도하는데 효과를 가지고 있다. 강섬유 혼입률 0.7% 또는 1%와 철근집합체를 사용한 조합이 I형 보의 효과적인 연성 거동을 보여주고 있다. 하중과 처짐관계 및 균열양상 등이 좁은 간격을 가진 작은 직경의 종방향 철근 집합체의 유용성을 나타내고 있다.

In this study, chloride penetration of calcium leached concrete according to mineral admixture ratio were compared with OPC. From the results, it showed that chloride diffusion coefficient in calcium leached concrete were increased as calcium leaching period increase. However, the chloride diffusion coefficient of BFS case showed the better resistance than Fly Ash case. And, the distribution of chloride diffusion coefficient was significantly changed by calcium leaching period.

본 연구는 폴리머 기반 보수모르타르에 미분쇄된 플라이애시 치환율의 영향을 평가하였다. 주요변수는 양생온도와 미분쇄된 플라이애시의 치환율이다. 양생온도는 40℃, 20℃ 및 5℃로, 미분쇄된 플라이애시 치환율은 결합재 대비 0~35%로 변화하였다. 굳지 않은 모르타르에서는 플로우를, 굳은 모르타르에서는 재령별 압축강도, 응력-변형률 관계 및 탄성계수, 파괴계수를 측정하고, 주사전자현미경 및 엑스선회절기 분석을 수행하였다. 실험결과 보수모르타르의 플로우, 탄성계수 및 파괴계수는 미분쇄된 플라이애시 치환율 20~30%에서 가장 높은 성능을 발휘하였다. 또한 재령별 압축강도는 미분쇄된 플라이애시 치환율과 양생온도에 현저한 영향을 받았는데, 미분쇄된 플라이애시 치환율 20%에서 초기강도 발현율이 가장 높았다. ACI 209에서 제시하고 있는 콘크리트 재령별 압축강도예측모델에서 초기 및 장기재령 강도발현 계수는 미분쇄된 플라이애시 치환율과 양생온도의 함수로 일반화할 수 있었다. 미분쇄된 플라이애시가 첨가된 페이스트는 수화생성물을 나타내는 피크(peak)의 수와 강도(intensity)가 증가되고 플라이애시 입자주변에 CSH 겔이 형성되었다.

As the usage of supplementary additives such as blast furnace slag and fly ash for concrete was increased, the carbonation of concrete has been a problem. Hence, in this research, as a solution of carbonation of the high-volume supplementary additive concrete, the effect of waste oil based liniment on carbonation and chloride resistivity was analyzed when it applied on the surface of the concrete.

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study produced an extrusion panel by using cement as the base materials and substitutingbinding materials up to 40% to analyze strength characteristics. According to the results of strength characteristics bythe replacement binder (Low energy curing Admixture) showed an apparent active strength improvement. In particular,specimens substituting binder as 45% indicated the greatest strength improvement. When binding materials was used withsubstitution, it showed strength characteristics similar or higher than specimens made from tertiary autoclave curing assecondary steam curing.

This study aims at evaluation of compressive strengths and coefficients of chloride ion diffusion in concrete specimens using plain, chemical admixture PNH deveoped for anti-chloride corrosion, commercially available product of B company and blast furnace of granuate slag(BSF). It is found throughout experiments that most cases of compressive strengths are almost similar except using BSF, but the PNH has the highest resistance against chloride attack.s

In this study, It was found that replacing a large amount of mineral admixture, we satisfied the target, compressive strength of 30, 50MPa and manufactured lightweight concrete reducing CO2 emissions up to 42.1～52.8% comparing normal concrete

강섬유는 콘크리트 부재의 인장영역에 효과적으로 작용하여 균열저항성을 높여주고 역학적 성능을 개선하는 것으로 알려져 있다. 본 연구는 팽창재를 사용한 강섬유 모르타르에 화학적 프리스트레싱을 인가하여 균열저항성 및 역학적 성능을 평가하는 연구이다. 이를 위해 시멘트 바인더의 10%를 치환한 CSA 팽장채가 사용되었으며 체적비 1%의 강섬유를 고려한 시멘트 모르타르 배합이 준비되었다. 기본적인 역학적인 성능평가 외에 노치를 가진 보를 제조하여 초기균열하중 및 파괴에너지를 평가하였다. 실험결과 강섬유와 CSA 팽창재를 혼입한 모르타르에서는 보통 강섬유 모르타르에 비하여 평균 1.75배의 균열저항성 하중이 증가하였으며, 파괴에너지 역시 1.41~1.53배 증가하였다. 최적의 강섬유 체적비와 팽창재의 혼입이 고려된다면 강섬유의 내부 화학적 프리스트레싱을 가진 복합재는 다양한 부재에 사용될 수 있으며, 외부하중에 효과적인 균열저감 기법으로 사용할 수 있다.

The energy consumption by buildings approximately reaches 25% of total korea energy consumption. The greatest part in the buildings of the energy consumption is building facade. but a few research projects on concrete comprising more than 70% of outsider of buildings has been tried. This research structural insulation concrete what improved insulation performance using Micro Form Admixture.

콘크리트의 취성파괴를 방지하기 위해 강섬유 보강재는 효과적인 복합재료이다. 그러나 시멘트 사용량이 많아지면 건조수축이 증가하고이로 인해, 강섬유 보강재의 연성증가 효과가 제한될 수 있다. 팽창재를 사용한 콘크리트 내부의 강섬유 보강재는 화학적 프리스트레싱 효과가 발생하여 강섬유 보강효과를 증가시킬 수 있다. 본 연구에서는 CSA 팽창재와 강섬유 보강재를 혼입하여 콘크리트의 역학적인 특성을분석하였다. 체적비 1~2%의 강섬유 보강재와 시멘트 중량의 10%의 CSA 팽창재를 혼입하였으며, 다양한 역학적 특성과 휨거동을 분석하였다. 강섬유 보강재를 혼입한 CSA 콘크리트는 인장강도와 초기균열강도의 증가를 나타냈으며, 균열후의 파괴에너지 증가와 같은 연성거동을 뚜렷하게 나타내었다. 적절한 팽창재 사용과 최적의 강섬유 보강재의 혼입률이 도출된다면 이들의 상호작용은 콘크리트의 취성을 더욱 효과적으로 제어할 수 있다.

When concrete is exposed to sulfate attack, ettringite is produced to cause internal expansion and crack. In this study, the sulfate resistance of remicon latex-modified concrete was compared with latex and admixture ratio. From the results, when latex content was increased, the sulfate resistance of remicon latex-modified concrete was improved.

This study investigates the autogenous shrinkage of morta that contains shrinkage reducing agent (SRA) It is observed that the autogenous shrinkage of mortar was about 300με at 6 days after casting. The SRA reduces the autogenous shrinkage by an half, but unexpected expansion was observed between 1 and 2 days after casting.

This experimental study investigates the influence on the tensile behavior of strain-hardening cement composite (SHCC) with HR and SWP Shrinkage Reducing Admixture (SRA). SRA can also improve the tensile strength and multiple cracks of SHCC material used in this study.

This experimental study investigates the influence on the flexural behavior of strain-hardening cement composite (SHCC) with HR and SWP Shrinkage Reducing Admixture (SRA). SRA can also improve flexural strengths and flexural toughness.