Game development costs a lot of money. Thus, in terms of cost-saving, game companies produce prototypes and undergo several tests and modifications during the development period. In this paper, we proposed a brainwave signal analysis system and linked it with the game to measure the player's emotion through brainwave analysis experiment and tried to solve these problems. The brainwave signal analysis system proposed in this paper is capable of various applications according to various development situations, such as the progress of the game, events, etc. in obtaining simple figures over time by linking games, and collecting the tester's responses according to development intentions, so there will have to be continuous additional research.

Recently, studies have been actively conducted on seismic design and improvement of the seismic performance of bridges, buildings, factories, and plants. In particular, heavy items that are being manufactured or waiting to be shipped from factories (such as generators, engines, and boilers) must be equipped with seismic stoppers to prevent them from moving or falling during an earthquake. Seismic stoppers should be suitably determined by the size and weight of these heavy items; however, they have no general design standard. In this study, structural analyses and seismic tests were conducted to evaluate the performance of newly designed seismic stoppers. Structural analysis was performed on three stopper models to estimate the external load at which the yield stress of the material was not exceeded. Based on the analysis results, a seismic test of the stopper was carried out in accordance with the AC156 test method. Finally, product specifications for all three seismic stopper models were determined and their static/dynamic load performance was evaluated.

This study examines the domestic and international bulletproof test standards of armor and plate which are supplied to the domestic market. In addition, improvements and suggestions for the test standard were presented. Experiments were conducted to clarify the distances to the edge, the difference between ammunition makers, and the position of the impact point of the bulletproof plate, which have been discussed in the conventional bulletproof test. As a result of the study, it was confirmed that the bulletproof performance is excellent as the distance from the edge increases. Next, performance differences between ammunition makers were not found. Finally, plates should be applied to the US ESAPI test specification to provide a clear and reproducible test method.

Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.

The study on the tire noise due to the On-Board Sound Intensity test method. The object of this project is to prepare the countermeasure of the noise reduction according to collect tire/road noise data under various influencing factors by using On-Board Sound Intensity test method. To accomplish the object ; A automotive is used as a test platform to test tire/road noise by changing different types of tires and using On-Board Sound Intensity test system. The influence of inflation pressure, road, load, speed and pattern type on tire/road noise is compared and analyzed. At the same time, the mechanism of tire/road noise is analyzed, which provides a experimental basis for tire noise reduction.

This study is a summary of the complex odor proficiency testing method using the air dilution sensory method conducted for the last 7 years. Results of the homogeneity and stability test were obtained from the measurement of the standard sample for identifying the range of measurable concentration so that the complex odor proficiency testing method was established through processing the manufactured standard sample and distribution method. Standard samples were prepared using a large Teflon bag after being homogeneously mixed inside a Teflon bag. Also, a distributing container was selected with a polyester aluminum bag in order to avoid samples of the best condition from being contaminated during transport as well as being exposed to invasive odor from a sampling bag. Test results revealed that the mixture of toluene and m-Xylene was most appropriate for this proficiency testing method to the homogeneity and stability of the testing method. In addition, DMS and DMDS were the optimized samples at the outlet area. As a result, the standard method was established to address the analysis quality management to the mixed odor inspection agencies in Korea.

This study aims to gather precise information on the real fabric color and texture, and purchasing intention of mobile shoppers buying clothes. Eighty volunteers participated in the sensory test on three smartphones with four colors and two fabricssmooth taffeta and hairy doeskin. This study carried out the posteriori test using the one-way ANOVA and Duncan test by SPSS21.0. In the analysis’ results of color preference, there were no differences among the four colors of taffeta between the smartphones, but different preferences between the red and yellow doeskin exist. In the case of the Samsung phone, which has an immense color distortion, the red fabric has a low color preference. In contrast, on the Apple phone yellow fabric had the highest preference because of its brightness. The Apple phone also has the highest purchasing intention of yellow colored taffeta, which is similar to the color preference results, although the real fabric has the opposite result. For doeskin, the real red and blue colored fabric has the highest purchasing intention. The Samsung phone has the biggest color mismatch with the real fabric. It also has the lowest purchasing intention of red taffeta fabric, while the LG phone has the lowest purchasing intention of blue fabric. Using the paired comparison method of the similarity between ‘real’ fabrics and the mobile version of fabric colors has a low similarity on all four colors of taffeta and doeskin fabrics. Therefore it can be concluded that phones do not represent the ‘real’ fabric color.

The object of this study is to investigate the relationship between the air dilution sensory test and the threshold odor number (TON) method for evaluating the odor of domestic wastewater, plating plant wastewater, food plant wastewater and lake water. The dilution factor of raw wastewater evaluated by the air dilution sensory test was in the order of food plant > plating plant > domestic > lake, and that evaluated by the threshold odor number method was in the order of food plant > domestic > plating plant > lake. The same results were obtained when the raw wastewater and lake water were diluted 2 and 5 times with pure water. The relative geometric standard deviation determined from the threshold values of each panel on the air dilution sensory test was much larger than that calculated from results derived from the threshold odor number method. The relative geometric standard deviation obtained from samples with a low dilution factor was greater. There was a very good linear correlation (correlation coefficient = 0.968~1.000) between the air dilution sensory test and the threshold odor number method. But, the reduction in odor intensity (the slopes of regression curves) by dilution was dependent on the types of the odor-emission sources.

PURPOSES: This study aims to develop a strength test method for irregularly shaped concrete block paver. METHODS : Ten (10) different types of concrete block pavers including porous and dense blocks were tested for strength capacities. Destructive and non-destructive methods were used to develop a strength test method for irregularly shaped concrete block paver. The flexural strength evaluation was conducted in accordance to KS F 4419, while compressive strength was conducted with a 45.7mm-diameter core specimen. The impact echo test method was used to evaluate the elastic modulus. Finally, regression analysis was used to investigate the relationship between flexural strength, compressive strength and elastic modulus based on their corresponding test results. RESULTS : The flexural strength of the tested block pavers ranged from 4MPa to 10MPa. At 95% confidence level, the coefficients of determination between compressive-flexural strength relationship and compressive strength-elastic modulus relationship were 0.94 and 0.84, respectively. These coefficients signified high correlation. CONCLUSIONS : Using the test method proposed in this study, it will be easier to evaluate the strength of irregularly shaped concrete block pavers through impact echo test and compressive test, instead of the flexural test. Relative to the flexural strength requirement of 5MPa, the minimum values of compressive strength and elastic modulus, as proposed, are 13.0MPa and 25.0GPa, respectively.

Many automotive components for power generation such as motors and alternators have been widely using ferrite magnets. To ensure a high level of efficiency could be achieved in an alternator, the assembled magnets must be in good enough durability. Recently, some hairline cracks have been found on the magnet produced by manufacturers in Korea. Thus, there is an increasing concern that some of the magnets produced could cause further problems after being assembled in the alternator. Based on the standard alternator test (RS0008 : 2006), this paper has developed an accelerated failure-free test for magnets in alternator to demonstrate that assembled magnets will meet durability objective specified by the manufacturer. This guarantees the target life of the magnet with 90 percent reliability and 90 percent confidence level (R90C90). Temperature and rotation speed were selected as accelerated stress factors.

목 적: 운무법에서 실린더 굴절력 및 축 오류가 존재하는 경우 크로스실린더를 사용하지 않고 피검자가 인식하는 방사선 시표의 진한선 이동에 입각하여 추가적인 교정방법을 알아보고자 하였다. 방 법: -1.25D~-1.5D의 정난시가 존재하는 34명의 대상자를 기준으로 원래의 실린더 굴절력 및 축에서 얼마의 오류가 발생하였는지를 평가하였다. 검사를 위한 전제조건은 교정 실린더 축은 의도적으로 5° 오류를, 실린더 굴절력은 원래 교정 값에서 의도적으로 -0.5D 혹은 -0.75D 감소 및 증가시켰다. 첫 번째 검사는 운무상태에서 실린더 축을 먼저 교정하고, 실린더 굴절력을 교정하였고, 두 번째 검사는 운무상태에서 실린더 굴절력을 먼저 교정하고, 실린더 축을 교정하였다. 실린더 굴절력 오류 및 축 오류를 비교하였다. 결 과: 실린더 굴절력 오류 및 축 오류는 각각 절댓값 0.25D 및 1° 보다 작았다. 결 론: 운무법을 통한 난시교정에서 15° 간격의 방사선 시표에서 추가적인 방법으로써 다음과 같이 제시될 수 있다. ① 인식된 진한 선 이동값이 45° 보다 작은 경우 실린더 굴절력을 증가시켜 처음에 인식한 진한선 방향에서 진한 선을 45° 정도 떨어지게 이동시킨다. 그 후에 모든 선 방향들이 균일하게 진할 때까지 진한선 이동방향과 반대 방향으로 실린더 축을 이동시켜 교정한다. ② 인식된 진한선 이동값이 45°인 경우 모든 선 방향들이 균일하게 진할 때까지 진한선 이동방향과 반대방향으로 실린더 축을 이동시켜 교정한다. ③인식된 진한 선 이동값이 45° 보다 큰 경우 실린더 굴절력을 감소시켜 처음에 인식한 진한선 방향에서 진한 선을 45° 정도 떨어지게 이동시킨다. 그 후에 모든 선 방향들이 균일하게 진할 때까지 진한선 이동방향과 반대방향으로 실린더 축을 이동시켜 교정한다.

LIVE/DEAD® BacLight™ and alamarBlue® are fluorescent materials used for the enumeration of live and dead bacteria. LIVE/DEAD® BacLight™ is generally used for confocal microscopy applications to differentiate live from dead bacteria in a biofilm or planktonic state. AlamarBlue® has also been used widely to assay live and dead bacteria in a planktonic state. Whilst these materials are successfully utilized in experiments to discriminate live from dead bacteria for several species of bacteria, the application of these techniques to oral bacteria is limited to the use of LIVE/DEAD® BacLight™ in biofilm studies. In our present study, we assessed whether these two methods could enumerate live and dead oral bacterial species in a planktonic state. We tested the reagents on Streptococcus mutans, Streptococcus sobrinus, Porphyromonas gingivalis, Aggregatibacter actinomycetemcomitans and Enterococcus faecalis and found that only LIVE/DEAD® BacLight™ could differentiate live from dead cells for all five of these oral strains. AlamarBlue® was not effective in this regard for P. gingivalis or A. actinomycetemcomitans. In addition, the differentiation of live and dead bacterial cells by alamarBlue® could not be performed for concentrations lower than 2 × 106 cells/ml. Our data thus indicate that LIVE/DEAD® BacLight™ is a more effective reagent for this analysis.