Fluorine-doped tin oxide (FTO) nanoparticles have been successfully synthesized using ultrasonic spray pyrolysis. The morphologies, crystal structures, chemical bonding states, and electrochemical properties of the nanoparticles are investigated. The FTO nanoparticles show uniform morphology and size distribution in the range of 6-10 nm. The FTO nanoparticles exhibit excellent electrochemical performance with high discharge specific capacity and good cycling stability (620mA h g−1 capacity retention up to 50 cycles), as well as excellent high-rate performance (250 mA h g−1 at 700mAg−1) compared to that of commercial SnO2. The improved electrochemical performance can be explained by two main effects. First, the excellent cycling stability with high discharge capacity is attributed to the nano-sized FTO particles, which are related to the increased electrochemical active area between the electrode and electrolyte. Second, the superb high-rate performance and the excellent cycling stability are ascribed to the increased electrical conductivity, which results from the introduction of fluorine doping in SnO2. This noble electrode structure can provide powerful potential anode materials for high-performance lithiumion batteries.

Hydrogen is considered a potential future energy source. Among other applications of hydrogen, hydrogen-rich water is emerging as a new health care product in industrial areas. Water electrolysis is typically used to generate a hydrogen rich water system. We annealed 10AA carbon paper in air to use it as an electrode of a hydrogen rich water generator. Driven by annealing, structural changes of the carbon paper were identified by secondary electron microscope analysis. Depending on the various annealing temperatures, changes of the hydrophilic characteristics were demonstrated. The crystal structures of pristine and heat-treated carbon paper were characterized by X-ray diffraction. Improvement of the efficiency of the electrochemical oxygen evolution reaction was measured via linear voltammetry. The optimized annealing temperature of 10AA carbon paper showed the possibility of using this material as an effective hydrogen rich water generator.

Novel processable sulfur copolymer (poly(S-r-CEA)) was synthesized via facile inverse vulcanization of elemental sulfur with 2-carboxyethyl acrylate (CEA). This polysulfide was electrospun producing sulfur-rich nanofiber and tested for heavy metal sequestration. Adsorption experiments show very high and efficient Hg2+ adsorption. This work extends the novelty of inverse vulcanization chemistry by developing method for preparation of material based on inverse vulcanized polysulfide. Consequently, a new and cheap yet effective material was prepared for heavy metal sequestration from contaminated water. This work was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2015R1A2A1A15055407) and by the Ministry of Education (No. 2009-0093816).

현재 사용되는 전기탈이온(EDI)공정은 전기투석법과 이온교환수지법을 혼합한 공정이다. 이 공정은 전기투석을 위한 양/음이온교환막이 사용되고 두 막 사이 에 이온교환수지로 채워서 모듈을 제작한다. 전기탈이온공정은 농축수가 강한 산성과 염기성이기 때문에 전극의 손상과 같은 문제점을 초래한다. 이러한 문제 점을 해결하기 위해서 전기흡착탈이온(EAD)공정을 사용한다. 전기흡착탈이온공 정은 반대 전하 이온을 흡착시켜 제거하고 역전을 통해서 탈착시켜 이온교환기 를 재생시키는데, 이 때 재생시간이 필요하다. 따라서, 이온교환막을 Bipolar막으 로 제조하여 해결할 수 있고, 전기탈이온공정과 공통적으로 모듈을 작게 만들기 위해서 나노사이즈의 이온교환입자를 제조하여 별도의 처리과정 없이 성능을 구현하고자하였다. 본 연구는 현재 생산되고 있는 모듈보다 높은 이온교환능력 을 가지며 바인더 역할을 할 수 있는 고무상의 고분자를 합성하고 이온교환수 지대신 이온교환능을 가진 nano particle을 이용하여 복합막을 제조하였다.

전기방사를 사용하여 제조된 나노섬유의 활용은 필터분야, 보호 의류 분야, 에너지 저장기능분야 등 다양한 분야가 있다. 이에 본 연구에서는 우수한 물성을 가지는 polybenzimidazole을 이용하여 방사 용액의 농도, 인가 전압, 방사 거리, collector speed에 따라 방사를 진행하였고, 후처리 과정까지 연구해보았다. 각각의 변수에 따라 nanofiber의 형태, sheet의 기계적 물성 등의 특성을 평가하였으며, 분리막 분야에 적용 가능한 적합한 방사조건에 대하여 연구하였다.

생체적합성과 흡습 특성이 있는 polyamide6 (PA6)를 혈액투석용 분리막으로 사용하기 위해 16 wt% PA6 고분자 용액을 전기방사하여 제조하였다. 제조된 PA6 nanofiber membrane은 직경(fiber diameter), 표면특성, 기공의 크기 분석을 통해 혈액투석용 분리막으로 최적화하였다. PA6 nanofiber membrane는 제 올라이트가 첨가된 친수성 고분자 용액으로 개질하여 혈액 속 노폐물인 creatinine 흡착 제거용 분리막으로 사용하고, creatine의 흡착효과는 UV-visible 분석으로 확인하였다.

A key element of environmentally friendly electric vehicles (EVs) based on polymer electrolyte fuel cells (PEFCs) and lithium ion batteries (LIBs) is an ion-selective membrane, which can transport specific ions such as proton and lithium ions, and provide mechanical and chemical resistances. The state-of-the art membranes for PEFCs and LIBs are perfluorinated sulfonic acid ionomer reinforced membranes and ceramic-coated polyolefin separators, respectively. In spite of the improvement of membranes characteristics, additional membrane modifications are still needed to improve electrochemical cell performances and to extend their lifetime. In this presentation, several plausible approaches to improve membrane characteristics are introduced.

The effect of CNT diameters on properties of CNT-polyamide composites was investigated such as electrical conductivity, tensile strength and thermal conductivity. To get different diameter distributions of CNTs, several portions of Mo and Fe in Mo-Fe/MgO catalysts were synthesized by a combustion method at 600℃. And all CNTs growed at 900℃ with 3 SLM methane and 1 SLM hydrogen for 40min. Four kinds of CNTs with different diameter distributions, such as 1~3nm, 3~7nm, 7~13nm, and 10~30nm, were selected to make CNT-polyamide composites. Each composite was manufactured by a solution mixing using bar-type ultra-sonicator in the CNT portions from 1phr to 50phr. And electrical conductivity, tensile strength, and thermal conductivity were measured. Three properties of CNT-polyamide composite, manufactured with 10nm diameter, were more excellent compared to other composites, with electrical conductivity  Ω at 7phr, thermal conductivity 2.4.W/mK at 40phr, tensile strength 60MPa at 30phr. CNTs with a diameter of 10nm were superior to other diameters for the multi-functional composite such as CNT-polyamide composites.

We demonstrate the electrochromic properties of TiO2 nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized TiO2 nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed TiO2 nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized TiO2 nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous TiO2 nanotubes annealed at 150°C have the largest oxidation/ reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologenanchored TiO2 nanotubes show superior electrochromic properties compared to pristine TiO2 nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of TiO2 nanotubes.

본 연구는 양이온 불균질막을 제조하기 위해 PVDF matrix에 상용 양이온교환수지와 sulfonated poly(phenylene oxide)(SPPO)를 배합하여 제조, 이온 흡착 특성에 관하여 연구하였다. 연구결과 PVDF-IER 불균질막과 PVDF-SPPO 불균질 막 PVDF-SPPO-IER과 비교하였을 때 고분자 매트릭스의 비율이 30% 이하일 경우 이온교환용량, 전기저항에서 우수한 물성 을 가지고 있는 것을 확인할 수 있었다. 인장강도의 경우 PVDF resin의 약한 내구성에도 불구하고 상용화 불균질막과 비교하 여 최대 5배 이상의 강인한 모습을 보이고 있는 것으로 확인할 수 있었다. 따라서 화학적 특성과 기계적 특성을 고려했을 때 PVDF와 이온교환분말과 SPPO의 혼합 최적 비율은 30 : 70이며 이때의 전기저항은 3~5 Ω⋅cm2, 이온교환 용량은 0.6~1.0 meq/g으로 측정되었고 기계적 강도는 12~15 kgf/cm2으로 측정되었다.

A sintering process for copper based films using a rapid thermal process with infrared lamps is proposed to improve the electrical properties. Compared with films produced by conventional thermal sintering, the microstructure of the copper based films contained fewer internal and interfacial pores and larger grains after the rapid thermal process. This high-density microstructure is due to the high heating rate, which causes the abrupt decomposition of the organic shell at higher temperatures than is the case for the low heating rate; the high heating rate also induces densification of the copper based films. In order to confirm the effect of the rapid thermal process on copper nanoink, copper based films were prepared under varying of conditions such as the sintering temperature, time, and heating rate. As a result, the resistivity of the copper based films showed no significant changes at high temperature (300 oC) according to the sintering conditions. On the other hand, at low temperatures, the resistivity of the copper based films depended on the heating rate of the rapid thermal process.

본 연구는 의료살균기술의 하나인 전극을 이용한 전기 충격 살균법을 순환식 수경재배의 배양액 재순환을 위한 배액 살균기술로 활용하고, 배액의 전기살균소독시스템을 구축하고자 할 때, 살균소독 효과가 높으며, 친환경적이고 경제적인 배양액 살균소독기술의 개발 및 전기살균소독시스템에서 사용될 전극의 최적 조건을 구명하고 전기소독의 가능성을 확인하기 위해 수행되었다. 전기살 균소독시스템 구축 시 적정 전극소재 구명을 위해 금속 전도체의 특성 조사 및 전기실험을 실시하여 배액의 pH 와 EC변화유무와 침전물 발생여부 및 배액의 원소변화 유무를 분석하였다. 새로이 개발된 전기살균소독시스템 구축 시 가장 적합한 금속 전도체 전극소재로는 전기전도도가 높고, 저항이 적으며, 소재의 수급이 용이하고, 가격이 저렴한 스테인리스 스틸임을 확인하였으며. 또한 스테인리스 스틸을 전극으로 사용하였을 때, 전기를 공급하기 전과 24V 이내의 전기를 공급한 후의 배양액내 원소변화는 거의 없는 것으로 분석되었다. 전극의 두께 보다는 넓이가 증가함에 따라 전류의 양이 증가하였으며 전극의 거리가 멀수록 목표 전류량에 도달하는 시간이 증가하였다. 적합한 전류량에 따른 주요 병원균의 살균 력을 조사한 결과 대표적 세균병인 풋마름병의 원인균인 Ralstonia solanacearum가 전류 15V-3A 170초에서 97% 가 사멸되는 것을 확인하였으며 곰팡이병인 Fusarium oxysporum은 24V-10A에서 98%의 살균력을 보였다.

In this study, we numerically analyzed flow and particle transport near the electrostatic precipitator in the tunnel according to train runs. When there was no train running, flow field was formed by a precipitator. Flow emitted from precipitator blocks the path along the tunnel, and therefore most contaminated air passes through the precipitator and can be cleaned. On the other hand, flow pattern during the train run was affected by train induced wind. A strong straight flow was generated at the front of train, and back flow was formed in the opposite line. When a train runs upward only (train start from suction section to blow section), the subway train transports contaminated particles along the tunnel. For downward train runs only case, the cleaned air reentered the contaminated section with train wind. Both train runs case showed combined flow and particle concentration pattern of both single train runs.

This study was conducted to examine the byproducts formation characteristics at the water treatment plants which applying electrolysis as a disinfection process in Gangwondo, Korea. Total of forty plants located in Gangwon Province, Korea were selected for the study. Correlation between dissolved organic carbon(DOC) and SUVA254 was not clear. Among the species of the disinfection byproducts(DBPs), chlorate and trihalomethanes(THMs) accounted for 76% and 14% of DBPs, respectively. The effect of DOC or SUVA254 on DBPs formation was not clearly demonstrated. The increased amount of THMs due to the raw water bromide content was found primarily in the form of chloroform, and the percent fraction of BDCM(bromodichloromethane) and DBCM(Dibromochloromethnae) was relatively insignificant. When the value of SUVA254 was greater than 2 L/mg·m, the percent fraction of BDCM and DBCM decreased while percent fraction of CF(chloroform) increased.

The electrical transport properties of La0.5Sr0.5CrO3 below room temperatures were investigated by dielectric, dc resistivity, magnetic properties and thermoelectric power. Below TC, La0.5Sr0.5CrO3 contains a dielectric relaxation process in the tangent loss and electric modulus. The La0.5Sr0.5CrO3 involves the transition from high temperature thermal activated conduction process to low temperature one. The transition temperature corresponds well to the Curie point. The relaxation mechanism has been discussed in the frame of electric modulus spectra. The scaling behavior of the modulus suggests that the relaxation mechanism describes the same mechanism at various temperatures. The low temperature conduction and relaxation takes place in the ferromagnetic phase. The ferromagnetic state in La0.5Sr0.5CrO3 indicates that the electron - magnon interaction occurs, and drives the carriers towards localization in tandem with the electron - lattice interaction even at temperature above the Curie temperature.

The development of glucose biosensors has been attracting much attention because of their importance in monitoring glucose in the human body; such sensors are used to diagnose diabetes and related human diseases. Thanks to the high selectivity, sensitivity to glucose detection, and relatively low-cost fabrication of enzyme-immobilized electrochemical glucose sensors, these devices are recognized as one of the most intensively investigated glucose sensor types. In this work, ZnO nanofibers were synthesized using an electrospinning method with polyvinyl alcohol zinc acetate as precursor material. Using the synthesized ZnO nanofibers, we fabricated glucose biosensors in which glucose oxidase was immobilized on the ZnO nanofibers. The sensors were used to detect a wide range of glucose from 10 to 700 M with a sensitivity of 10.01 nA/cm2- μM, indicating that the ZnO nanofiber-based glucose sensor can be used for the detection of glucose in the human body. The control of nanograins in terms of the size and crystalline quality of the individual nanofibers is required for improving the glucose-sensing abilities of the nanofibers.

Although microalgae are considered as a promising feedstock for biofuels, cost-efficient harvesting of microalgae needs to be significantly improved. In this study, the use of electro coagulation as a more rapid flocculation method for harvesting a freshwater (Scenedesmus dimorphus) microalgae species was evaluated. The results showed that, electro coagulation was shown to be more efficient using an aluminum anode than using an iron anode. And optimum conditions of electro coagulation for harvesting Scenedesmus dimorphus were found. The optimum stirring speed was 100 rpm and optimum pH was 5. Furthermore, the current density which the fastest and highest recovery efficiency is achieved at 30 A/m2, while the highest energy efficiency was achieved at 10 A/m2. A the rapid and high recovery efficiency indicate that electro coagulation is a particularly attractive technology for harvesting microalgae.

The main object of this study is to investigate the collection characteristics of an electro-static multi-staged impaction system, experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with the experimental parameters such as the inlet velocity, stage number, applied voltage and shape of discharge electrode, etc. In results, the pressure drop is shown below 148 mmH2O lower than that of the conventional bag filter at inlet velocity 3.46 m/s and 5 stage. For 5 stage , the collection efficiencies are to be 97.4, 99.0% with the applied voltage 0 kV at the inlet velocity 2.07, 3.46 m/s, while 98.4, 99.9% with 40 kV of a sharp edge discharge electrode. Additionally, the present system is to be considered as an effective compact system for a removal of particulate pollutants from marine diesel engines due to much higher collection efficiency and appropriate pressure drop.

상업적으로 이용되는 폴리스티렌계 이온교환막은 제조 공정이 쉽고 간단하지만 막이 가지는 취성 때문에 내구성이 약하다는 단점을 가지고 있다. 이를 보완하기 위하여 친수성 그룹인 poly(ethylene glycol)을 곁사슬로 가지고 있는 poly(ethylene glycol)methyl ether methacrylate를 공중합시켜 음이온 교환막을 합성하였다. 지지체로는 내화학성 및 기계적 강도가 우수한 다 공성 PE 지지체를 사용하였고, 여기에 다양한 조성의 vinylbenzyl chloride, styrene, poly(ethylene glycol)methyl ether methacrylate, divinylbenzene, benzoyl peroxide를 녹인 단량체 용액을 지지체 기공에 채운 뒤 열중합 가교시켜 trimethylamine을 이 용하여 음이온 교환기를 도입해 세공충전 음이온 교환막을 합성하였다. 또한 poly(ethylene glycol)methyl ether methacrylate의 곁사슬 길이와 각 단량체가 차지하는 비율의 변화가 음이온 교환막의 전기화학적 특성에 미치는 영향을 알아보았다.

This study aims to examine the risk of electrical fire in places where electric heat wires are used. In general, the use of electric heating wires is becoming more common and prevalent in a bid to prevent increasing damage caused by freezing and bursting in residential water pipes, factory pipes and irrigation pipes in vinyl greenhouse and a variety of heat wire products are available in market with legal safety requirements imposed on them. However, the widespread use of anti-freezing burst heat wire products has caused increasing incidents of fire, which often fail to be incorporated into statistics due to quick onsite extinguishing and insignificant damage although damage is gradually on the rise. Against this backdrop, this study aims to look into the possibility of ignition caused by electric heat wires and the mechanism of how it turns into catching fire through overheat and short circuit tests for anti-freezing burst electrical heat wires (hereinafter called the ‘heat wire’) and expects to serve as the basis for further observations and analyses on the cause of fire and the process of ignition in a scientific manner.