In this study, the cooling performance of the motor was analyzed according to the number and the length of the fins of the heat sink, and at the same time, the effect of forced convection on the cooling performance improvement by changing the air flow speed of the cooling fan was conducted. In order to find out the cooling performance in terms of turbulent kinetic energy, pressure, and temperature according to the number of heat sink fins, length of fins, and wind speed of the cooling fan, an aluminum heat sink was modeled according to the size of the motor. The heating value of the motor was calculated, and it was set to be the same under all analysis conditions. The turbulence model applied for numerical analysis in this study used the standard k-ε model. As a result, it was confirmed that the cooling effect of the heat sink increases as the air flow speed of the cooling fan, the number of fins, and the length of fins increase.

LMU(Leg Mating Unit)는 해양구조물의 플로트오버 실치에서 활용되는 장비 중 하나로 충격을 흡수하는 부분과 결합부로 구성된다. 본 연구에서는 최적설계를 통해 부유식 해양구조물의 플로트오버 설치용 LMU의 성능을 개선하여 설계 요구 조건을 만족하는 설계를 개발하였다. 초기설계는 고정식 해양구조물의 플로트오버 설치용으로 개발된 것의 제원을 참조하였으며, 초탄성재료의 거동을 표현하기 위해 Mooney-Rivlin 모델을 활용하였다. 설계민감도해석 결과를 바탕으로 중요도에 따라 설계 변수들을 선별하였고, 진화 알고리듬 기반 최적설계를 수행하였다. 최적설계 문제에서 목적함수는 LMU의 중량이며, 제약 조건은 LMU에 작용하는 최대 폰-미세스 응력과 LMU의 성능을 평가할 수 있는 반발력이다.

The purpose of this study was to develop an optimized hull-form of a coastal fishing vessel operating at high speed. In order to achieve the purpose of the study, HOTBOAT, that can perform an automatic hull-form optimal design of a coastal fishing vessel, was developed. HOTBOAT was composed of an objective function estimation algorithm and an optimization algorithm and a hull-form modification algorithm. In this study, the wave-making resistance was selected as an objective function and the potential-based panel method was applied to predict the objective function. SQP(sequential quadratic programming) method were adopted to predict the optimal direction and answer. Bell-shaped hull-form modification function method and NURBS(non-uniform rational B-spline) geometry modeling method were applied to modify the hull-form during the whole optimization process. HOTBOAT was applied to develop the optimal hull-form of a coastal fishing vessel with minimum wave resistance. The initial hull-form of the coastal fishing vessel was compared with the optimal hull-form. As a result of hull-form optimization, a coastal fishing vessel with a reduction of about 30% was developed compared with the initial hull-form and the displacement and the wetted surface area of the optimal hull-form was decreased to less than about 1% in comparison with the initial hull-form.

Eutrophication and algal blooms can lead to increase of taste and odor compounds and health problems by cyanobacterial toxins. To cope with these eco-social issues, Ministry of Environment in Korea has been reinforcing the effluent standards of wastewater treatment facilities. As a result, various advanced phosphorus removal processes have been adopted in each wastewater treatment plant nation-widely. However, a lot of existing advanced wastewater treatment processes have been facing the problems of expensive cost in operation and excessive sludge production caused by high dosage of coagulant. In this study, the sedimentation and dissolved air flotation (SeDAF) process integrated with sedimentation and flotation has been developed for enhanced phosphorus removal in wastewater treatment facilities. Design and operating parameters of the SeDAF process with the capacity of 100 m3/d were determined, and a demonstration plant has been installed and operated at I wastewater treatment facility (located in Gyeonggi-do) for the verification of field applicability. Several empirical evaluations for the SeDAF process were performed at demonstration-plant scale, and the results showed clearly that T-P and turbidity values of treated water were to satisfy the highest effluent standards below 0.2 mg/L and 2.0 NTU stably for all of operation cases.

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

In this study, we studied the method of using general architectural glass instead of using the existing acrylic material for high luminance flat lighting. The flat panel lighting used the side illumination method to increase the ease of installation and aesthetic satisfaction. In general, glass has an amorphous structure with a lower angle of refraction than acrylic, so it is not suitable for use in flat panel lighting as a light guide, but in this study, the role of light distribution characteristics and diffusion patterns in the case of using such a glass light guide. Quantitative simulations were conducted to confirm new possibilities. In the simulation, the backlight estimation method was used, and about 10,000,000 rays were placed within a unit area in order to obtain a result similar to the real thing. As a result of the simulation, the geometry of the diffusion pattern could be specified, and the value of the geometry could be quantified using the ratio of the diameter and height of the pattern. As a result of the calculation, it was found that the maximum amount of light was generated around 75 degrees by quantitatively calculating the ratio and the outgoing light angle at which the maximum value of the outgoing light occurred between 05 and 1.0. As a result of these studies, it was confirmed that it is possible to use ordinary glass at the same time as a transparent window and light-emitting lighting at night.

This study proposed a base framework for creating sustainable designs with textile production waste and unused neckties with the “design thinking” approach, which is an iterative process. It aimed to set an example of how fashion designers can plan and manage their clothing design processes in a more sustainable way by recycling textile production scraps and unused neckties into unique clothing pieces with the upcycling method. Unused neckties and upholstery scraps were turned into skirts, blouses, and dresses by using creative techniques in line with current fashion trends. In addition, the five-stage iterative design process followed was explained, and the way in which the waste textile materials gained value by being converted into unique garments was discussed in terms of the user and the designer. Through the study, it was observed that the smallest amount of textile waste can be transformed into upcycled clothing via the iterative process, and original, value-added products enjoyed by consumers can be created. In addition, it was observed that the design thinking approach improves the understanding of the context of the problem, creativity in the generation of insights and solutions, skills to materialize those solutions through iterative prototyping, and the ability to combine these factors. Promising ideas to help designers develop recycling strategies were also provided.

This study aims to derive the criteria of folding techniques and their characteristics through analysis of literature and previous studies. This will be realized by performing a case study on male fashion design and folding. It will propose diverse directions and data for male fashion design, by making men’s jackets using a folding technique. The concept and terms of folding were clarified through examination of existing literature and previous studies. Specifically, four pieces were created with motifs of the four seasons. Among the types of pleats expressed in the works, composition pleats include double ruffles, gathers, and draperies, while processed ones include box pleats, knife pleats, and accordion pleats. This study expresses continuity, fluidity, scalability, and ambiguity through the use of such pleats. The results of the production are as follows. First, in terms of the continuous use of regular and repetitive pleats, a possibility of rich pleats was confirmed because they varied depending on the gap between the pleat and target material. Second, in liquid but irregular pleats, diverse moods were created by the pleat movement. The overlapping of repeated pleats expresses diverse spaces and shapes in a 3D extended silhouette. Third, in pleat classification, ambiguity was confirmed with the use of continuous accordion pleats in the printed gradation fabric. It is anticipated that more diverse and creative designs could be created using more extended techniques in future studies.

As a cultural feature of, the relics of the Royal Tomb of King Muryeong are suitable design content for applying with sophisticated production and delicate molding laser cutting techniques. The purpose of this study is to develop modern bag designs using relics of the Royal Tomb of King Muryeong of Baekje using laser-cutting techniques. First, the historical background and meaning of Baekje’s cultural content were explored. Second, the principle of laser-cutting techniques were explored, laser-cutting techniques applied to modern fashion and bag design were examined, and bag design characteristics were analyzed. Third, based on prior research, the criteria for the development of bag design, from which eight bag design were developed that combine modern popularity and functionality utilizing Baekje cultural content and using laser-cutting techniques to apply the textile design developed by researchers in 2013 (modified to match laser-cutting techniques). The research results show that bag were clutch, tote, shoulder, and mini. Gold, silver, brown, beige, and navy colors were arranged, based on black/white contrast. Cow, lambskin, washed snakeskin, mesh, and Saffiano leather were used. For the pattern-applying technique, this study showed that a new digital technique, which is laser-cutting techniques could be combined with contemporary bag designs. Moreover, a bag design was developed that has a modern sense and functionality as well as Korean formativeness, which is significant.

The brake system drives the vehicle by converting the kinetic energy into thermal energy. The heat energy generated during the braking process increases the temperature of the structure. It causes thermal deformation due to overheating and causes cracks, noise, and vibration that degrade performance. However, it is not possible to fundamentally prevent the temperature rise of the brakes. There is a need for research on improving the heat dissipation performance by improving the shape of the brake. Therefore, this study analyzed the concentrated stress caused by overheating of the brake disc. In order to improve the performance of the disk, shape optimization design was performed. For stress and thermal analysis, the analysis was conducted using the finite element program ANSYS Transient Thermal and Structural tools. PIAnO (Process Integration and Design Optimization) was used to perform optimal design. In the formulation of the optimum design, the stress was minimized by satisfying the constraints. This study intends to present a new brake disc model by performing perforated shape and arrangement.

High-pressure membrane system like nanofiltration(NF) and reverse osmosis(RO) was investigated as a part of water treatment processes to produce high quality potable water with low organic matter concentration through membrane module tests and design simulation. River water and sand filtration permeate in Busan D water treatment plant were selected as feed water, and NE4040-90 and RE4040-Fen(Toray Chemical Korea) were used as NF and RO membranes, respectively. Total organic carbon(TOC) concentrations of NF and RO permeates were mostly below 0.5 mg/l and the average TOC removal rates of NF and RO membranes were 93.99% and 94.28%, respectively, which means NF used in this study is competitive with RO in terms of organic matter removal ability. Different from ions rejection tendency, the TOC removal rate increases at higher recovery rates, which is because the portion of higher molecular weight materials in the concentrated raw water with increasing recovery rate increases. Discharge of NF/RO concentrates to rivers may not be acceptable because the increased TDS concentration of the concentrates can harm the river eco-system. Thus, the idea of using NF/RO concentrate as the raw water for industrial water production was introduced. The design simulation results with feed water and membranes used in this work reveal that the raw water guideline can be satisfied if the recovery rate of NF/RO system is designed below 80%.

본 연구에서는 철골편심가새골조 시스템을 대상으로 다목적최적화기법을 통해 설계를 수행하고 그 결과를 분석하였다. 최적화 설 계를 위해 유전 알고리즘의 일종인 NSGA-II를 활용하였다. 여기서, 목적함수는 이율배반적 관계를 갖는 구조물량과 층간변위로 하여 최소화되고, 제약조건에는 구조기준에서 요구하는 내력비, 링크의 회전각 등을 포함하였다. 제약조건은 최적화 알고리즘 내에서 각 항목을 위반할수록 목적함수 값을 크게 증가시키는 벌금함수의 형태를 가지고 있다. 설계기준에서 EBF 시스템의 설계규정은 링크 부재만 항복이 허용되며 나머지 부재는 링크 항복 시 발생되는 부재력을 탄성상태에서 견디도록 의도한 역량설계법에 기초한다. 그러나 최적화를 통해 도출된 결과 중 일부는 구조기준의 설계조항은 만족하지만 특정층 링크에 소성변형이 집중되어 연약층을 형성함 으로써 기준에서 의도하는 역량설계의 원칙을 위배하는 결과가 나타났다. 이를 해결하기 위해 모든 링크의 전단 초과강도계수 중 최 대값이 최소값의 1.25배를 넘지 않도록 하는 제약식을 추가하였다. 새로운 제약식을 추가한 경우 모든 최적해는 설계기준과 역량설계의 원칙을 준수하는 것으로 나타났다. 모든 설계안에서 보 경간에 대한 링크의 길이비는 전단링크의 범주에 해당하는 10% ~ 14%였다. 전체적으로 설계안들은 링크의 초과강도 계수비가 가장 지배적인 제약으로 작용하였으며, 구조기준의 요구사항 중 층간변위와 내력비 등의 항목에서 허용치에 비해 매우 보수적으로 설계되었다.

본고는 ZOOM의 소회의실 기능과 온라인 전지 기능을 가진 Padlet을 조합하여 실 시간 수업 중 교수자와 학습자 그리고 학습자와 학습자간에 상호작용이 활발히 일어 나는 쌍방향 수업 방안을 설계 적용한 연구이다. ZOOM의 소회의실 기능을 통해 소그룹을 형성하고 학습자간에 또래 튜터링의 방식으로 수업을 진행하였다. 그리고 소그룹 활동에서 수렴된 생각과 미해결된 부분을 Padlet 공간에서 전체 구성원들과 재 차 공유하여 수업 내용에 대한 의문점을 모두 해결하도록 하였다. 이와 같이 설계된 수업을 진행한 후 마지막에 학습자들의 만족도를 살펴보았다.

본 논문는 개폐식 대공간 구조물의 지진하중에 대한 동적응답을 줄이기 위한 목적으로 파라메트릭 설계 기법을 적용한 TMD에 관한 연구이다. 인공지능 알고리즘을 이용하여 감쇠장치의 설치 위치를 자동 탐색하는 컴포넌트를 개발하였다. 이는 구조물의 동적응답을 실시간으로 확인하고, 구조물의 감쇠장치 최적의 위치를 찾을 수 있을 있다. 또한, 여러 대안에 대한 감쇠장치 질량의 최적 값을 찾아주며, 지붕의 열린 상태와 닫힌 상태에 모두 효과적으로 적용될 수 있는 설계안을 찾을 수 있다.

The domestic of modern architectural remodeling method emphasizes simple aesthetic elements, and the correct design and construction methods are not established based on quantitative grounds, thus damaging the value of cultural properties. This study attempts to re-examine the value of modern buildings recognized as old buildings. It is a basic step to present the correct remodeling of the building. The design criteria for exterior wall remodeling of modern buildings were presented. These research results are suitable for energy conservation design standards and can prevent defects in buildings. In the future, more accurate analysis will be required by securing physical property values for various domestic materials through subsequent research.

목적 : 본 연구는 렌즈를 향해 입사하는 광선의 구면수차를 제거하기 위해 광선추적법과 스넬의 법칙을 사용하 여 계산과정을 유도하여 렌즈를 설계하였다. 방법 : 스넬의 법칙을 활용하여 렌즈의 초점이 한 점으로 진행하도록 역산하여 설계하는 과정을 거친 후 광학 시뮬레이션 소프트웨어인 SPEOS를 활용하여 수치를 측정하였다. 결과 : 렌즈의 입사각에 따라 렌즈의 후면 곡률반경이 변화하였고, 일정 입사고에 도달하였을 때 렌즈 후면의 곡률반경이 구면수차 보정함으로 인해 일정 입사고 이전의 값에서 변화하는 구간이 발생하였다. 결론 : 본 연구를 통해 구면수차를 제거하는 렌즈를 스넬의 법칙과 광선추적의 방식으로 설계하여 광학 시뮬레 이션 소프트웨어를 통하여 구현하였다. 이를 통하여 스넬의 법칙을 이용한 광선 추적방식의 설계가 구면수차를 제 거한 비구면렌즈의 제작에 있어서 도움이 될 것으로 기대한다.

Smart City operates with the purpose of solving urban problems. The important thing in smart city operation is that spatial information must be managed at a high level. In addition, it has the characteristics of being managed by one platform. This study presented the core value dimension of smart city based on analysis of various domestic and overseas smart city operation cases. Smart cities are basically operated based on spatial information, and the higher the level of spatial information, the more smart city services can be connected and managed in an integrated manner. The performance dimension of smart city core values presented in the study includes prosperity, personalization, convenience, accuracy, sustainability, safety, environment, integration, etc., and there is a connectivity dimension, a concept that can be managed in an integrated manner. This study will be useful for empirical research on smart city performance dimension design and surveys based on case studies. It will also help field managers who develop, operate, and manage smart cities when quantifying performance dimensions.

In recent years, importance of blockchain systems has been grown after success of bitcoin. Distributed consensus algorithm is used to achieve an agreement, which means the same information is recorded in all nodes participating in blockchain network. Various algorithms were suggested to resolve blockchain trilemma, which refers conflict between decentralization, scalability, security. An algorithm based on Byzantine Agreement among Decentralized Agents (BADA) were designed for the same manner, and it used limited committee that enables an efficient consensus among considerable number of nodes. In addition, election of committee based on Proof-of-Nonce guarantees decentralization and security. In spite of such prominence, application of BADA in actual blockchain system requires further researches about performance and essential features affecting on the performance. However, performance assessment committed in real systems takes a long time and costs a great deal of budget. Based on this motivation, we designed and implemented a simulator for measuring performance of BADA. Specifically, we defined a simulation framework including three components named simulator Command Line Interface, transaction generator, BADA nodes. Furthermore, we carried out response surface analysis for revealing latent relationship between performance measure and design parameters. By using obtained response surface models, we could find an optimal configuration of design parameters for achieving a given desirable performance level.

A manufacturing company should produce its products and make a profit to continue its management. With the adoption of a multi-category small-volume production system, manufacturers that produce concrete pump-cine products are carrying out improvement activities to increase their market share amid the business-to-customer business environment. However, the slump in the construction investment environment has led to a decline in sales of concrete pump trucks. The purpose of holding inventory is to prevent loss of sales opportunities with the rate of change in the sales plan, and reducing the rate of change in the product can reduce unnecessary inventory and, in order to realize this, the goal of reducing inventory can be achieved by reviewing the parts that can be designed for common use. Therefore, to reduce the inventory of concrete pump trucks, semi-finished publicization design is necessary. According to the analysis, the frame assembly process of the 32M model is common. Production capacity can be secured without loss of sales opportunity.

건축은 우리 실제 삶 가운데 존재하지만, 영화·게임 등의 가상세계 속 세상의 배경이 되어 다양한 모습으로 보여진다. 영화와 게임, 애니메이션의 공간 속에서 건축은 영화 미술의 중요한 역할을 하며 애니메이션과 게임 속 가상 세계의 스토리를 흥미롭고 현실감 있게 표현하는 중요한 수단이 되고 있다. 특히 4차 산업혁명 시대의 중요 기술 중 하나인 가상현실과 증강현실 콘텐츠 개발에도 건축은 현실 표현이자 창의적 가공을 통한 결정적 모티브 역할을 담당하고 있다. 또한 최근 게임 제작 분야의 3D모델링 게임제작에 건축전공자와 게임디자이너의 협업을 통한 시너지로 풍부한 콘텐츠가 개발되고 있다. 본 논문에서는 디지털 콘텐츠의 가상세계 속 건축 디자인 사례를 분야별로 분석하고 최신 동향과 앞으로의 활용 방안을 제시하고자 한다.